------------------------------------------------------------------------------- -- Phase: Environment ------------------------------------------------------------------------------- NO_DEPENDS=1 UNAME_r=6.5 UNAME_m=x86_64 UNAME_p=x86_64 UNAME_v=unknown UNAME_s=DragonFly PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SSL_NO_VERIFY_PEER=1 LANG=C HOME=/root USER=root TERM=dumb SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: showconfig ------------------------------------------------------------------------------- ===> The following configuration options are available for bitcoin-25.0: DBUS=on: D-Bus IPC system support DEBUG=off: Build with debugging support HARDENING=on: Attempt to harden binaries (PIE for ASLR, NX Stack) QRCODES=on: Display QR Codes TESTS=off: Build test binary and unit tests UPNP=on: UPnP protocol support WALLET=on: Wallet Management Support ZMQ=on: Block and transaction broadcasting with ZeroMQ ===> Use 'make config' to modify these settings SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: CONFIGURE_ENV ------------------------------------------------------------------------------- OBJCXX="c++" OBJCXXFLAGS=" -pipe -O2 -fno-strict-aliasing " MAKE=gmake PKG_CONFIG=pkgconf QT_SELECT=qt5 QMAKEMODULES="/construction/net-p2p/bitcoin/bitcoin-25.0/mkspecs/modules:/usr/local/lib/qt5/mkspecs/modules" XDG_DATA_HOME=/construction/net-p2p/bitcoin XDG_CONFIG_HOME=/construction/net-p2p/bitcoin XDG_CACHE_HOME=/construction/net-p2p/bitcoin/.cache HOME=/construction/net-p2p/bitcoin TMPDIR="/tmp" PATH=/construction/net-p2p/bitcoin/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin PKG_CONFIG_LIBDIR=/construction/net-p2p/bitcoin/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc80 DEFAULT_AUTOCONF=2.71 CONFIG_SITE=/xports/Templates/config.site lt_cv_sys_max_cmd_len=262144 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: CONFIGURE_ARGS ------------------------------------------------------------------------------- --without-libs --with-gui=qt5 --without-daemon --without-utils --with-dbus --disable-debug --enable-hardening --with-qrencode --disable-tests --disable-bench --with-miniupnpc --enable-wallet --with-incompatible-bdb --with-sqlite=yes BDB_CFLAGS=-I/usr/local/include/db5 BDB_LIBS="-L/usr/local/lib/db5 -Wl,-rpath=/usr/local/lib/db5 -ldb_cxx-5.3" --enable-zmq --prefix=/usr/local ${_LATE_CONFIGURE_ARGS} SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: MAKE_ENV ------------------------------------------------------------------------------- V=1 QT_SELECT=qt5 QMAKEMODULES="/construction/net-p2p/bitcoin/bitcoin-25.0/mkspecs/modules:/usr/local/lib/qt5/mkspecs/modules" XDG_DATA_HOME=/construction/net-p2p/bitcoin XDG_CONFIG_HOME=/construction/net-p2p/bitcoin XDG_CACHE_HOME=/construction/net-p2p/bitcoin/.cache HOME=/construction/net-p2p/bitcoin TMPDIR="/tmp" PATH=/construction/net-p2p/bitcoin/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin PKG_CONFIG_LIBDIR=/construction/net-p2p/bitcoin/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc80 DEFAULT_AUTOCONF=2.71 PREFIX=/usr/local LOCALBASE=/usr/local NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing " CPP="cpp" CPPFLAGS="-I/usr/local/include" LDFLAGS=" " LIBS="-L/usr/local/lib" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: MAKE_ARGS ------------------------------------------------------------------------------- DESTDIR=/construction/net-p2p/bitcoin/stage SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: PLIST_SUB ------------------------------------------------------------------------------- DBUS="" NO_DBUS="@comment " DEBUG="@comment " NO_DEBUG="" HARDENING="" NO_HARDENING="@comment " QRCODES="" NO_QRCODES="@comment " TESTS="@comment " NO_TESTS="" UPNP="" NO_UPNP="@comment " WALLET="" NO_WALLET="@comment " ZMQ="" NO_ZMQ="@comment " QT_BINDIR="lib/qt5/bin" QT_INCDIR="include/qt5" QT_LIBDIR="lib/qt5" QT_ARCHDIR="lib/qt5" QT_PLUGINDIR="lib/qt5/plugins" QT_LIBEXECDIR="libexec/qt5" QT_IMPORTDIR="lib/qt5/imports" QT_QMLDIR="lib/qt5/qml" QT_DATADIR="share/qt5" QT_DOCDIR="share/doc/qt5" QT_L10NDIR="share/qt5/translations" QT_EXAMPLEDIR="share/examples/qt5" QT_TESTDIR="share/qt5/tests" QT_MKSPECDIR="lib/qt5/mkspecs" QT_TOOLDIR="lib/qt5/bin" OSREL=6.5 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib PROFILE="@comment " DOCSDIR="share/doc/bitcoin" EXAMPLESDIR="share/examples/bitcoin" DATADIR="share/bitcoin" WWWDIR="www/bitcoin" ETCDIR="etc/bitcoin" SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: SUB_LIST ------------------------------------------------------------------------------- DBUS="" NO_DBUS="@comment " DEBUG="@comment " NO_DEBUG="" HARDENING="" NO_HARDENING="@comment " QRCODES="" NO_QRCODES="@comment " TESTS="@comment " NO_TESTS="" UPNP="" NO_UPNP="@comment " WALLET="" NO_WALLET="@comment " ZMQ="" NO_ZMQ="@comment " PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/bitcoin DOCSDIR=/usr/local/share/doc/bitcoin EXAMPLESDIR=/usr/local/share/examples/bitcoin WWWDIR=/usr/local/www/bitcoin ETCDIR=/usr/local/etc/bitcoin SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: /etc/make.conf ------------------------------------------------------------------------------- DPORTS_BUILDER=yes DISABLE_LICENSES=yes DEFAULT_VERSIONS=ssl=openssl FORCE_PACKAGE=yes DEVELOPER=yes DFLY_STING_XFAIL=yes USE_PACKAGE_DEPENDS_ONLY=yes PORTSDIR=/xports PORT_DBDIR=/options PKG_DBDIR=/var/db/pkg PKG_CACHEDIR=/var/cache/pkg PKG_COMPRESSION_FORMAT=.tgz DEVELOPER=1 WITH_CCACHE_BUILD=yes CCACHE_DIR=/ccache UID=0 ARCH=x86_64 OPSYS=DragonFly DFLYVERSION=600503 OSVERSION=9999999 OSREL=6.5 _OSRELEASE=6.5-SYNTH DISTDIR=/distfiles WRKDIRPREFIX=/construction BATCH=yes PACKAGE_BUILDING=yes PKG_CREATE_VERBOSE=yes MAKE_JOBS_NUMBER=13 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/protobuf-3.21.12,1.pkg Installing /packages/All/norm-1.5r6_3.pkg Installing /packages/All/libzmq4-4.3.4.pkg Installing /packages/All/indexinfo-0.3.1.pkg Installing /packages/All/gettext-runtime-0.21.1.pkg Installing /packages/All/gmake-4.3_2.pkg Installing /packages/All/pkgconf-1.8.1,1.pkg Installing /packages/All/libffi-3.4.4.pkg Installing /packages/All/pcre2-10.42.pkg Installing /packages/All/ncurses-6.4.pkg ===== Message from ncurses-6.4: -- To get the terminfo database please install the terminfo-db package: pkg install terminfo-db Installing /packages/All/readline-8.2.1.pkg Installing /packages/All/libxml2-2.10.4.pkg Installing /packages/All/libiconv-1.17.pkg Installing /packages/All/expat-2.5.0.pkg Installing /packages/All/mpdecimal-2.5.1.pkg Installing /packages/All/openssl-1.1.1u,1.pkg Installing /packages/All/python39-3.9.17.pkg ===== Message from python39-3.9.17: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py39-gdbm databases/py-gdbm@py39 py39-sqlite3 databases/py-sqlite3@py39 py39-tkinter x11-toolkits/py-tkinter@py39 Installing /packages/All/glib-2.76.4,2.pkg Generating GIO modules cache Compiling glib schemas No schema files found: doing nothing. Installing /packages/All/desktop-file-utils-0.26_1.pkg Building cache database of MIME types Building cache database of MIME types Installing /packages/All/autoconf-switch-20220527.pkg Installing /packages/All/m4-1.4.19,1.pkg Installing /packages/All/perl5-5.32.1_3.pkg Installing /packages/All/autoconf-2.71.pkg Installing /packages/All/automake-1.16.5.pkg Installing /packages/All/libtool-2.4.7_1.pkg Installing /packages/All/qt5-buildtools-5.15.8p157.pkg touch: /usr/local/include/qt5/QtCore/qconfig-modules.h: No such file or directory sed: /usr/local/include/qt5/QtCore/qconfig-modules.h: No such file or directory pkg: POST-INSTALL script failed Installing /packages/All/double-conversion-3.3.0.pkg Installing /packages/All/icu-73.2,1.pkg Installing /packages/All/liblz4-1.9.4,1.pkg Installing /packages/All/zstd-1.5.5.pkg Installing /packages/All/qt5-core-5.15.8p157_1.pkg Installing /packages/All/qt5-xml-5.15.8p157.pkg Installing /packages/All/qt5-linguisttools-5.15.8p1.pkg Installing /packages/All/qt5-qmake-5.15.8p157_2.pkg Installing /packages/All/ccache-3.7.12_4.pkg Create compiler links... create symlink for cc create symlink for cc (world) create symlink for c++ create symlink for c++ (world) create symlink for CC create symlink for CC (world) create symlink for gcc create symlink for gcc (world) create symlink for g++ create symlink for g++ (world) ===== Message from ccache-3.7.12_4: -- NOTE: Please read /usr/local/share/doc/ccache/ccache-howto-freebsd.txt for information on using ccache with FreeBSD ports and src. Installing /packages/All/boost-libs-1.82.0_1.pkg ===== Message from boost-libs-1.82.0_1: -- You have built the Boost library with thread support. Don't forget to add -pthread to your linker options when linking your code. Installing /packages/All/libevent-2.1.12.pkg Installing /packages/All/png-1.6.39.pkg Installing /packages/All/libqrencode-4.1.1.pkg Installing /packages/All/miniupnpc-2.2.4.pkg Installing /packages/All/db5-5.3.28_9.pkg ===== Message from db5-5.3.28_9: -- ===> NOTICE: The db5 port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://docs.freebsd.org/en/articles/contributing/#ports-contributing -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: EOLd, potential security issues, maybe use db18 instead. It is scheduled to be removed on or after 2022-06-30. UNFLAVORED databases/sqlite3 -> use databases/sqlite3@default Installing /packages/All/tcl86-8.6.13.pkg Installing /packages/All/libedit-3.1.20221030,1.pkg Installing /packages/All/sqlite3-3.42.0,1.pkg Installing /packages/All/libICE-1.1.0_1,1.pkg Installing /packages/All/libSM-1.2.3,1.pkg Installing /packages/All/libXau-1.0.9.pkg Installing /packages/All/xorgproto-2022.1_1.pkg Installing /packages/All/libXdmcp-1.1.3.pkg Installing /packages/All/libxcb-1.15_1.pkg Installing /packages/All/libX11-1.8.6,1.pkg Installing /packages/All/dbus-1.14.6,1.pkg ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. Installing /packages/All/qt5-dbus-5.15.8p157.pkg Installing /packages/All/libevdev-1.5.9.pkg Installing /packages/All/brotli-1.0.9,1.pkg Installing /packages/All/freetype2-2.12.1_2.pkg ===== Message from freetype2-2.12.1_2: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/index.html, if documentation was installed). Installing /packages/All/fontconfig-2.14.2,1.pkg Running fc-cache to build fontconfig cache... Installing /packages/All/graphite2-1.3.14.pkg Installing /packages/All/harfbuzz-7.3.0.pkg Installing /packages/All/libepoll-shim-0.0.20230411.pkg Installing /packages/All/libudev-devd-0.5.1.pkg Installing /packages/All/libmtdev-1.1.6_1.pkg Installing /packages/All/libgudev-234.pkg Installing /packages/All/libwacom-1.5.pkg Installing /packages/All/py39-setuptools-63.1.0_1.pkg Installing /packages/All/py39-evdev-1.6.0.pkg Installing /packages/All/py39-six-1.16.0.pkg Installing /packages/All/py39-pyudev-0.22.0.pkg Installing /packages/All/libinput-1.23.0.pkg Installing /packages/All/xcb-util-0.4.1,1.pkg Installing /packages/All/xcb-util-wm-0.4.2.pkg Installing /packages/All/xcb-util-image-0.4.1.pkg Installing /packages/All/xcb-util-keysyms-0.4.1.pkg Installing /packages/All/xcb-util-renderutil-0.3.10.pkg Installing /packages/All/wayland-1.22.0.pkg ===== Message from wayland-1.22.0: -- Wayland requires XDG_RUNTIME_DIR to be defined to a path that will contain "wayland-%d" unix(4) sockets. This is usually handled by consolekit2 (via ck-launch-session) or pam_xdg (via login). Installing /packages/All/xkeyboard-config-2.34_2.pkg Installing /packages/All/libxkbcommon-1.5.0.pkg ===== Message from libxkbcommon-1.5.0: -- If arrow keys don't work under X11 switch to legacy rules e.g., For sh/bash/ksh/zsh run and (optionally) add into ~/.profile: export XKB_DEFAULT_RULES=xorg For csh/tcsh run and (optionally) add into ~/.login: setenv XKB_DEFAULT_RULES xorg Installing /packages/All/libXext-1.3.4,1.pkg Installing /packages/All/libglvnd-1.6.0.pkg Installing /packages/All/jpeg-turbo-2.1.5.1.pkg Installing /packages/All/ca_root_nss-3.89.1.pkg ===== Message from ca_root_nss-3.89.1: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/qt5-network-5.15.8p157.pkg Installing /packages/All/vulkan-headers-1.3.257.pkg Installing /packages/All/hicolor-icon-theme-0.17.pkg Installing /packages/All/xprop-1.2.6.pkg Installing /packages/All/libXt-1.2.1,1.pkg Installing /packages/All/libXmu-1.1.3,1.pkg Installing /packages/All/xset-1.2.5.pkg Installing /packages/All/xdg-utils-1.1.3_2.pkg Installing /packages/All/encodings-1.0.5,1.pkg Installing /packages/All/libfontenc-1.1.4.pkg Installing /packages/All/mkfontscale-1.2.1.pkg Installing /packages/All/font-bh-ttf-1.0.3_4.pkg Running fc-cache to build fontconfig cache... Installing /packages/All/font-misc-meltho-1.0.3_4.pkg Installing /packages/All/font-misc-ethiopic-1.0.4.pkg Installing /packages/All/dejavu-2.37_1.pkg Running fc-cache to build fontconfig cache... ===== Message from dejavu-2.37_1: -- Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Installing /packages/All/xorg-fonts-truetype-7.7_1.pkg Installing /packages/All/libXfixes-6.0.0.pkg Installing /packages/All/libXi-1.8,1.pkg Installing /packages/All/libXrender-0.9.10_2.pkg Installing /packages/All/qt5-gui-5.15.8p157_1.pkg Installing /packages/All/qt5-widgets-5.15.8p157.pkg UNFLAVORED databases/sqlite3 -> use databases/sqlite3@default SUCCEEDED 00:00:31 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> bitcoin-25.0 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> bitcoin-25.0 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by bitcoin-25.0 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> bitcoin-25.0 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by bitcoin-25.0 for building => SHA256 Checksum OK for bitcoin/bitcoin-25.0.tar.gz. => SHA256 Checksum OK for bitcoin/bitcoin128.png. SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> bitcoin-25.0 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by bitcoin-25.0 for building ===> Extracting for bitcoin-25.0 => SHA256 Checksum OK for bitcoin/bitcoin-25.0.tar.gz. => SHA256 Checksum OK for bitcoin/bitcoin128.png. Extracted Memory Use: 46.37M SUCCEEDED 00:00:03 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for bitcoin-25.0 ===> Applying ports patches for bitcoin-25.0 from /xports/net-p2p/bitcoin/files SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> bitcoin-25.0 depends on executable: protoc - found ===> bitcoin-25.0 depends on package: libzmq4>0 - found ===> bitcoin-25.0 depends on package: gmake>=4.3 - found ===> bitcoin-25.0 depends on package: pkgconf>=1.3.0_1 - found ===> bitcoin-25.0 depends on executable: update-desktop-database - found ===> bitcoin-25.0 depends on package: autoconf>=2.71 - found ===> bitcoin-25.0 depends on package: automake>=1.16.5 - found ===> bitcoin-25.0 depends on executable: libtoolize - found ===> bitcoin-25.0 depends on package: qt5-buildtools>=5.15 - found ===> bitcoin-25.0 depends on file: /usr/local/lib/qt5/bin/lrelease - found ===> bitcoin-25.0 depends on package: qt5-qmake>=5.15 - found ===> bitcoin-25.0 depends on file: /usr/local/bin/ccache - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- ===> bitcoin-25.0 depends on shared library: libboost_date_time.so - found (/usr/local/lib/libboost_date_time.so) ===> bitcoin-25.0 depends on shared library: libevent.so - found (/usr/local/lib/libevent.so) ===> bitcoin-25.0 depends on shared library: libprotobuf.so - found (/usr/local/lib/libprotobuf.so) ===> bitcoin-25.0 depends on shared library: libqrencode.so - found (/usr/local/lib/libqrencode.so) ===> bitcoin-25.0 depends on shared library: libminiupnpc.so - found (/usr/local/lib/libminiupnpc.so) ===> bitcoin-25.0 depends on shared library: libdb-5.3.so - found (/usr/local/lib/libdb-5.3.so) ===> bitcoin-25.0 depends on shared library: libsqlite3.so - found (/usr/local/lib/libsqlite3.so) ===> bitcoin-25.0 depends on shared library: libQt5Core.so - found (/usr/local/lib/qt5/libQt5Core.so) ===> bitcoin-25.0 depends on shared library: libQt5DBus.so - found (/usr/local/lib/qt5/libQt5DBus.so) ===> bitcoin-25.0 depends on shared library: libQt5Gui.so - found (/usr/local/lib/qt5/libQt5Gui.so) ===> bitcoin-25.0 depends on shared library: libQt5Network.so - found (/usr/local/lib/qt5/libQt5Network.so) ===> bitcoin-25.0 depends on shared library: libQt5Widgets.so - found (/usr/local/lib/qt5/libQt5Widgets.so) SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> bitcoin-25.0 depends on executable: protoc - found ===> bitcoin-25.0 depends on package: libzmq4>0 - found ===> bitcoin-25.0 depends on package: gmake>=4.3 - found ===> bitcoin-25.0 depends on package: pkgconf>=1.3.0_1 - found ===> bitcoin-25.0 depends on executable: update-desktop-database - found ===> bitcoin-25.0 depends on package: autoconf>=2.71 - found ===> bitcoin-25.0 depends on package: automake>=1.16.5 - found ===> bitcoin-25.0 depends on executable: libtoolize - found ===> bitcoin-25.0 depends on package: qt5-buildtools>=5.15 - found ===> bitcoin-25.0 depends on file: /usr/local/lib/qt5/bin/lrelease - found ===> bitcoin-25.0 depends on package: qt5-qmake>=5.15 - found ===> bitcoin-25.0 depends on file: /usr/local/bin/ccache - found ===> bitcoin-25.0 depends on shared library: libboost_date_time.so - found (/usr/local/lib/libboost_date_time.so) ===> bitcoin-25.0 depends on shared library: libevent.so - found (/usr/local/lib/libevent.so) ===> bitcoin-25.0 depends on shared library: libprotobuf.so - found (/usr/local/lib/libprotobuf.so) ===> bitcoin-25.0 depends on shared library: libqrencode.so - found (/usr/local/lib/libqrencode.so) ===> bitcoin-25.0 depends on shared library: libminiupnpc.so - found (/usr/local/lib/libminiupnpc.so) ===> bitcoin-25.0 depends on shared library: libdb-5.3.so - found (/usr/local/lib/libdb-5.3.so) ===> bitcoin-25.0 depends on shared library: libsqlite3.so - found (/usr/local/lib/libsqlite3.so) ===> bitcoin-25.0 depends on shared library: libQt5Core.so - found (/usr/local/lib/qt5/libQt5Core.so) ===> bitcoin-25.0 depends on shared library: libQt5DBus.so - found (/usr/local/lib/qt5/libQt5DBus.so) ===> bitcoin-25.0 depends on shared library: libQt5Gui.so - found (/usr/local/lib/qt5/libQt5Gui.so) ===> bitcoin-25.0 depends on shared library: libQt5Network.so - found (/usr/local/lib/qt5/libQt5Network.so) ===> bitcoin-25.0 depends on shared library: libQt5Widgets.so - found (/usr/local/lib/qt5/libQt5Widgets.so) ===> Configuring for bitcoin-25.0 libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'. libtoolize: copying file 'build-aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'build-aux/m4'. libtoolize: copying file 'build-aux/m4/libtool.m4' libtoolize: copying file 'build-aux/m4/ltoptions.m4' libtoolize: copying file 'build-aux/m4/ltsugar.m4' libtoolize: copying file 'build-aux/m4/ltversion.m4' libtoolize: copying file 'build-aux/m4/lt~obsolete.m4' configure.ac:39: installing 'build-aux/ar-lib' configure.ac:37: installing 'build-aux/compile' configure.ac:24: installing 'build-aux/config.guess' configure.ac:24: installing 'build-aux/config.sub' configure.ac:27: installing 'build-aux/install-sh' configure.ac:27: installing 'build-aux/missing' Makefile.am: installing 'build-aux/depcomp' parallel-tests: installing 'build-aux/test-driver' libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'. libtoolize: copying file 'build-aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'build-aux/m4'. libtoolize: copying file 'build-aux/m4/libtool.m4' libtoolize: copying file 'build-aux/m4/ltoptions.m4' libtoolize: copying file 'build-aux/m4/ltsugar.m4' libtoolize: copying file 'build-aux/m4/ltversion.m4' libtoolize: copying file 'build-aux/m4/lt~obsolete.m4' configure.ac:122: installing 'build-aux/compile' configure.ac:51: installing 'build-aux/config.guess' configure.ac:51: installing 'build-aux/config.sub' configure.ac:58: installing 'build-aux/install-sh' configure.ac:58: installing 'build-aux/missing' src/Makefile.am: installing 'build-aux/depcomp' parallel-tests: installing 'build-aux/test-driver' configure: loading site script /xports/Templates/config.site checking pkg-config is at least version 0.9.0... yes checking build system type... x86_64-portbld-dragonfly6.5 checking host system type... x86_64-portbld-dragonfly6.5 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether gmake sets $(MAKE)... yes checking whether gmake supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... yes checking whether gmake supports nested variables... (cached) yes checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C++... yes checking whether c++ accepts -g... yes checking for c++ option to enable C++11 features... none needed checking whether gmake supports the include directive... yes (GNU style) checking dependency style of c++... gcc3 checking whether c++ supports C++17 features with -std=c++17... yes checking whether std::filesystem can be used without link library... no checking whether std::filesystem needs -lstdc++fs... no checking whether std::filesystem needs -lc++fs... configure: error: in `/construction/net-p2p/bitcoin/bitcoin-25.0': configure: error: cannot figure out how to use std::filesystem See `config.log' for more details ===> Script "configure" failed unexpectedly. Please report the problem to kbowling@FreeBSD.org [maintainer] and attach the "/construction/net-p2p/bitcoin/bitcoin-25.0/config.log" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. a /usr/local/sbin/pkg-static info -g -Ea). *** Error code 1 Stop. make: stopped in /xports/net-p2p/bitcoin FAILED 00:01:31