------------------------------------------------------------------------------- -- Phase: Environment ------------------------------------------------------------------------------- NO_DEPENDS=1 UNAME_r=6.5 UNAME_m=x86_64 UNAME_p=x86_64 UNAME_v=unknown UNAME_s=DragonFly PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SSL_NO_VERIFY_PEER=1 LANG=C HOME=/root USER=root TERM=dumb SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: showconfig ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: CONFIGURE_ENV ------------------------------------------------------------------------------- ac_cv_path_PERL=/usr/local/bin/perl ac_cv_path_PERL_PATH=/usr/local/bin/perl PERL_USE_UNSAFE_INC=1 XDG_DATA_HOME=/construction/graphics/p5-Image-Sane XDG_CONFIG_HOME=/construction/graphics/p5-Image-Sane XDG_CACHE_HOME=/construction/graphics/p5-Image-Sane/.cache HOME=/construction/graphics/p5-Image-Sane TMPDIR="/tmp" PATH=/construction/graphics/p5-Image-Sane/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin PKG_CONFIG_LIBDIR=/construction/graphics/p5-Image-Sane/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc80 PERL_EXTUTILS_AUTOINSTALL="--skipdeps" PERL_MM_USE_DEFAULT="YES" SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: CONFIGURE_ARGS ------------------------------------------------------------------------------- INSTALLDIRS="site" CC="cc" CCFLAGS="-pipe -O2 -fno-strict-aliasing " LD="cc" PREFIX="/usr/local" INSTALLPRIVLIB="/usr/local/lib" INSTALLARCHLIB="/usr/local/lib" SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: MAKE_ENV ------------------------------------------------------------------------------- PERL_USE_UNSAFE_INC=1 XDG_DATA_HOME=/construction/graphics/p5-Image-Sane XDG_CONFIG_HOME=/construction/graphics/p5-Image-Sane XDG_CACHE_HOME=/construction/graphics/p5-Image-Sane/.cache HOME=/construction/graphics/p5-Image-Sane TMPDIR="/tmp" PATH=/construction/graphics/p5-Image-Sane/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin PKG_CONFIG_LIBDIR=/construction/graphics/p5-Image-Sane/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc80 PREFIX=/usr/local LOCALBASE=/usr/local NOPROFILE=1 CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing " CPP="cpp" CPPFLAGS="" LDFLAGS=" " LIBS="" CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: MAKE_ARGS ------------------------------------------------------------------------------- DESTDIR=/construction/graphics/p5-Image-Sane/stage SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: PLIST_SUB ------------------------------------------------------------------------------- OSREL=6.5 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib PERL_VERSION=5.32.1 PERL_VER=5.32 PERL5_MAN1=lib/perl5/site_perl/man/man1 PERL5_MAN3=lib/perl5/site_perl/man/man3 SITE_PERL=lib/perl5/site_perl SITE_ARCH=lib/perl5/site_perl/mach/5.32 PROFILE="@comment " DOCSDIR="share/doc/Image-Sane" EXAMPLESDIR="share/examples/Image-Sane" DATADIR="share/Image-Sane" WWWDIR="www/Image-Sane" ETCDIR="etc/Image-Sane" SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: SUB_LIST ------------------------------------------------------------------------------- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/Image-Sane DOCSDIR=/usr/local/share/doc/Image-Sane EXAMPLESDIR=/usr/local/share/examples/Image-Sane WWWDIR=/usr/local/www/Image-Sane ETCDIR=/usr/local/etc/Image-Sane SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: /etc/make.conf ------------------------------------------------------------------------------- DPORTS_BUILDER=yes DISABLE_LICENSES=yes DEFAULT_VERSIONS=ssl=openssl FORCE_PACKAGE=yes DEVELOPER=yes DFLY_STING_XFAIL=yes USE_PACKAGE_DEPENDS_ONLY=yes PORTSDIR=/xports PORT_DBDIR=/options PKG_DBDIR=/var/db/pkg PKG_CACHEDIR=/var/cache/pkg PKG_COMPRESSION_FORMAT=.tgz DEVELOPER=1 WITH_CCACHE_BUILD=yes CCACHE_DIR=/ccache UID=0 ARCH=x86_64 OPSYS=DragonFly DFLYVERSION=600503 OSVERSION=9999999 OSREL=6.5 _OSRELEASE=6.5-SYNTH DISTDIR=/distfiles WRKDIRPREFIX=/construction BATCH=yes PACKAGE_BUILDING=yes PKG_CREATE_VERBOSE=yes MAKE_JOBS_NUMBER=13 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/perl5-5.32.1_3.pkg Installing /packages/All/p5-ExtUtils-Depends-0.8001.pkg Installing /packages/All/pkgconf-1.8.1,1.pkg Installing /packages/All/p5-ExtUtils-PkgConfig-1.16.pkg Installing /packages/All/png-1.6.39.pkg Installing /packages/All/libdeflate-1.18.pkg Installing /packages/All/jbigkit-2.1_1.pkg Installing /packages/All/liblz4-1.9.4,1.pkg Installing /packages/All/zstd-1.5.5.pkg Installing /packages/All/jpeg-turbo-2.1.5.1.pkg Installing /packages/All/tiff-4.4.0_1.pkg Installing /packages/All/expat-2.5.0.pkg Installing /packages/All/libdaemon-0.14_1.pkg Installing /packages/All/libICE-1.1.0_1,1.pkg Installing /packages/All/libSM-1.2.3,1.pkg Installing /packages/All/libXau-1.0.9.pkg Installing /packages/All/xorgproto-2022.1_1.pkg Installing /packages/All/libXdmcp-1.1.3.pkg Installing /packages/All/libxcb-1.15_1.pkg Installing /packages/All/libX11-1.8.6,1.pkg Installing /packages/All/dbus-1.14.6,1.pkg ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. Installing /packages/All/indexinfo-0.3.1.pkg Installing /packages/All/gettext-runtime-0.21.1.pkg Installing /packages/All/libffi-3.4.4.pkg Installing /packages/All/pcre2-10.42.pkg Installing /packages/All/ncurses-6.4.pkg ===== Message from ncurses-6.4: -- To get the terminfo database please install the terminfo-db package: pkg install terminfo-db Installing /packages/All/readline-8.2.1.pkg Installing /packages/All/libxml2-2.10.4.pkg Installing /packages/All/libiconv-1.17.pkg Installing /packages/All/mpdecimal-2.5.1.pkg Installing /packages/All/openssl-1.1.1u,1.pkg Installing /packages/All/python39-3.9.17.pkg ===== Message from python39-3.9.17: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py39-gdbm databases/py-gdbm@py39 py39-sqlite3 databases/py-sqlite3@py39 py39-tkinter x11-toolkits/py-tkinter@py39 Installing /packages/All/glib-2.76.4,2.pkg Generating GIO modules cache Compiling glib schemas No schema files found: doing nothing. Installing /packages/All/dbus-glib-0.112.pkg Installing /packages/All/gdbm-1.23.pkg Installing /packages/All/libevent-2.1.12.pkg Installing /packages/All/gnome_subr-1.0.pkg Installing /packages/All/avahi-app-0.8_1.pkg ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. Installing /packages/All/libnghttp2-1.53.0.pkg Installing /packages/All/libssh2-1.11.0,3.pkg Installing /packages/All/libunistring-1.1.pkg Installing /packages/All/libidn2-2.3.4.pkg Installing /packages/All/libpsl-0.21.2_3.pkg Installing /packages/All/ca_root_nss-3.89.1.pkg ===== Message from ca_root_nss-3.89.1: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/curl-8.1.2.pkg Installing /packages/All/nspr-4.35.pkg Installing /packages/All/lcms2-2.15_1.pkg Installing /packages/All/brotli-1.0.9,1.pkg Installing /packages/All/freetype2-2.12.1_2.pkg ===== Message from freetype2-2.12.1_2: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/index.html, if documentation was installed). UNFLAVORED databases/sqlite3 -> use databases/sqlite3@default Installing /packages/All/libedit-3.1.20221030,1.pkg Installing /packages/All/sqlite3-3.42.0,1.pkg Installing /packages/All/nss-3.91.pkg Installing /packages/All/fontconfig-2.14.2,1.pkg Running fc-cache to build fontconfig cache... Installing /packages/All/openjpeg-2.5.0.pkg Installing /packages/All/libXext-1.3.4,1.pkg Installing /packages/All/libglvnd-1.6.0.pkg Installing /packages/All/pixman-0.42.2.pkg Installing /packages/All/libXrender-0.9.10_2.pkg Installing /packages/All/cairo-1.17.4_2,3.pkg Installing /packages/All/poppler-data-0.4.12.pkg Installing /packages/All/gmp-6.2.1.pkg Installing /packages/All/mpfr-4.2.0_1,1.pkg Installing /packages/All/mpc-1.3.1_1.pkg Installing /packages/All/binutils-2.40_4,1.pkg Installing /packages/All/gcc9-9.5.0_1.pkg ===== Message from gcc9-9.5.0_1: -- To ensure binaries built with this toolchain find appropriate versions of the necessary run-time libraries, you may want to link using -Wl,-rpath=/usr/local/lib/gcc9 For ports leveraging USE_GCC, USES=compiler, or USES=fortran this happens transparently. -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Unsupported by upstream. Use GCC 10 or newer instead.. It is scheduled to be removed on or after 2024-06-30. Installing /packages/All/poppler-23.05.0.pkg Installing /packages/All/gobject-introspection-1.76.1,1.pkg Installing /packages/All/poppler-glib-23.05.0.pkg Installing /packages/All/libltdl-2.4.7.pkg Installing /packages/All/giflib-5.2.1.pkg Installing /packages/All/webp-1.3.0_1.pkg Installing /packages/All/libgd-2.3.3_5,1.pkg Installing /packages/All/libexif-0.6.24.pkg Installing /packages/All/libgphoto2-2.5.26_2.pkg Installing /packages/All/sane-backends-1.2.1_1.pkg ===> Creating groups. Creating group 'saned' with gid '194'. ===> Creating users Creating user 'saned' with uid '194'. ===== Message from sane-backends-1.2.1_1: -- saned will log to the 'daemon' facility; this is a hard-coded default. Also, saned has no support for SSL/TLS or cryptographic authentication; you may wish to deploy security/stunnel to wrap it if you have concerns about security. If you are using a USB scanner, you should create /usr/local/etc/devd/saned.conf to allow saned access permissions. Currently, devfs.rules(5) has no support for USB specific filters such as vendor, product and serial number. Here is an example saned.conf for an Epson CX3650 multi-function scanner/printer device (assuming you are sharing the printer function with cups): notify 100 { match "system" "USB"; match "subsystem" "INTERFACE"; match "type" "ATTACH"; match "cdev" "ugen[0-9].[0-9]"; match "vendor" "0x04b8"; match "product" "0x080e"; action "chown -L cups:saned /dev/$cdev && chmod -L 660 /dev/$cdev"; }; To determine which port your scanner is connected to, inspect the output of 'usbconfig list' before and after connecting your scanner, and note the numbers which appear after 'ugen' in the first column. Then, use 'usbconfig -d X.Y dump_device_desc' to learn the idVendor and idProduct fields, and plug them into the above example entry. Finally, restart devd with the command: # /etc/rc.d/devd restart Please take /usr/local/etc/sane.d/dll.conf as an example only; you may wish to enable only the 'net' backend on client machines; be sure to point it at your scan server. If you are setting up a scan server, you may also wish to edit /usr/local/etc/sane.d/saned.conf to only permit specific machines. Installing /packages/All/p5-Class-Data-Inheritable-0.09.pkg Installing /packages/All/p5-Devel-StackTrace-2.04.pkg Installing /packages/All/p5-Exception-Class-1.45.pkg Installing /packages/All/p5-Readonly-2.05.pkg Installing /packages/All/ccache-3.7.12_4.pkg Create compiler links... create symlink for cc create symlink for cc (world) create symlink for c++ create symlink for c++ (world) create symlink for CC create symlink for CC (world) create symlink for gcc create symlink for gcc (world) create symlink for g++ create symlink for g++ (world) create symlink for gcc9 create symlink for gcc9 (world) create symlink for g++9 create symlink for g++9 (world) create symlink for cpp9 create symlink for cpp9 (world) ===== Message from ccache-3.7.12_4: -- NOTE: Please read /usr/local/share/doc/ccache/ccache-howto-freebsd.txt for information on using ccache with FreeBSD ports and src. UNFLAVORED databases/sqlite3 -> use databases/sqlite3@default SUCCEEDED 00:00:32 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> p5-Image-Sane-5_1 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> p5-Image-Sane-5_1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by p5-Image-Sane-5_1 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> p5-Image-Sane-5_1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by p5-Image-Sane-5_1 for building => SHA256 Checksum OK for Image-Sane-5.tar.gz. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> p5-Image-Sane-5_1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by p5-Image-Sane-5_1 for building ===> Extracting for p5-Image-Sane-5_1 => SHA256 Checksum OK for Image-Sane-5.tar.gz. Extracted Memory Use: 0.25M SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for p5-Image-Sane-5_1 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> p5-Image-Sane-5_1 depends on package: p5-ExtUtils-Depends>=0 - found ===> p5-Image-Sane-5_1 depends on package: p5-ExtUtils-PkgConfig>=0 - found ===> p5-Image-Sane-5_1 depends on package: sane-backends>=1.0.19 - found ===> p5-Image-Sane-5_1 depends on package: p5-Exception-Class>=1.43 - found ===> p5-Image-Sane-5_1 depends on package: p5-Readonly>=0 - found ===> p5-Image-Sane-5_1 depends on package: perl5>=5.32.r0<5.33 - found ===> p5-Image-Sane-5_1 depends on package: perl5>=5.32.r0<5.33 - found ===> p5-Image-Sane-5_1 depends on file: /usr/local/bin/ccache - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- ===> p5-Image-Sane-5_1 depends on shared library: libsane.so - found (/usr/local/lib/libsane.so) SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> p5-Image-Sane-5_1 depends on package: p5-ExtUtils-Depends>=0 - found ===> p5-Image-Sane-5_1 depends on package: p5-ExtUtils-PkgConfig>=0 - found ===> p5-Image-Sane-5_1 depends on package: sane-backends>=1.0.19 - found ===> p5-Image-Sane-5_1 depends on package: p5-Exception-Class>=1.43 - found ===> p5-Image-Sane-5_1 depends on package: p5-Readonly>=0 - found ===> p5-Image-Sane-5_1 depends on package: perl5>=5.32.r0<5.33 - found ===> p5-Image-Sane-5_1 depends on package: perl5>=5.32.r0<5.33 - found ===> p5-Image-Sane-5_1 depends on file: /usr/local/bin/ccache - found ===> p5-Image-Sane-5_1 depends on shared library: libsane.so - found (/usr/local/lib/libsane.so) ===> Configuring for p5-Image-Sane-5_1 Checking if your kit is complete... Looks good Warning: prerequisite Test::Requires 0 not found. Warning: prerequisite Try::Tiny 0 not found. Generating a Unix-style Makefile Writing Makefile for Image::Sane Writing MYMETA.yml and MYMETA.json SUCCEEDED 00:00:02 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for p5-Image-Sane-5_1 --- blib/lib/Image/.exists --- --- blib/arch/.exists --- --- blib/lib/auto/Image/Sane/.exists --- --- blib/arch/auto/Image/Sane/.exists --- --- blib/bin/.exists --- --- blib/script/.exists --- --- blib/man1/.exists --- --- blib/man3/.exists --- --- config --- --- subdirs --- --- dynamic --- --- Sane.c --- --- Sane.bs --- --- pm_to_blib --- --- Sane.c --- "/usr/local/bin/perl" "/usr/local/lib/perl5/5.32/ExtUtils/xsubpp" -typemap '/usr/local/lib/perl5/5.32/ExtUtils/typemap' -typemap '/construction/graphics/p5-Image-Sane/Image-Sane-5/typemap' Sane.xs > Sane.xsc --- Sane.bs --- Running Mkbootstrap for Sane () chmod 644 "Sane.bs" --- blib/arch/auto/Image/Sane/Sane.bs --- "/usr/local/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Sane.bs blib/arch/auto/Image/Sane/Sane.bs 644 --- blibdirs --- --- config --- --- pm_to_blib --- cp lib/Image/Sane/Device.pm blib/lib/Image/Sane/Device.pm cp lib/Image/Sane.pm blib/lib/Image/Sane.pm --- Sane.c --- mv Sane.xsc Sane.c --- Sane.o --- cc -c -I. -I/usr/local/include -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -DVERSION=\"5\" -DXS_VERSION=\"5\" -DPIC -fPIC "-I/usr/local/lib/perl5/5.32/mach/CORE" Sane.c --- blib/arch/auto/Image/Sane/Sane.so --- rm -f blib/arch/auto/Image/Sane/Sane.so LD_RUN_PATH="/usr/local/lib" cc -shared -L/usr/local/lib/perl5/5.32/mach/CORE -lperl -L/usr/local/lib -fstack-protector-strong Sane.o -o blib/arch/auto/Image/Sane/Sane.so -L/usr/local/lib -lsane chmod 755 blib/arch/auto/Image/Sane/Sane.so --- dynamic --- --- linkext --- --- pure_all --- --- manifypods --- Manifying 1 pod document --- all --- SUCCEEDED 00:00:06 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- ===> p5-Image-Sane-5_1 depends on package: p5-Exception-Class>=1.43 - found ===> p5-Image-Sane-5_1 depends on package: p5-Readonly>=0 - found ===> p5-Image-Sane-5_1 depends on package: perl5>=5.32.r0<5.33 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for p5-Image-Sane-5_1 ===> p5-Image-Sane-5_1 depends on package: p5-Exception-Class>=1.43 - found ===> p5-Image-Sane-5_1 depends on package: p5-Readonly>=0 - found ===> p5-Image-Sane-5_1 depends on package: perl5>=5.32.r0<5.33 - found ===> Generating temporary packing list "/usr/local/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Sane.bs blib/arch/auto/Image/Sane/Sane.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /construction/graphics/p5-Image-Sane/stage/usr/local/lib/perl5/site_perl/mach/5.32/auto/Image/Sane/Sane.so Installing /construction/graphics/p5-Image-Sane/stage/usr/local/lib/perl5/site_perl/mach/5.32/Image/Sane.pm Installing /construction/graphics/p5-Image-Sane/stage/usr/local/lib/perl5/site_perl/mach/5.32/Image/Sane/Device.pm Installing /construction/graphics/p5-Image-Sane/stage/usr/local/lib/perl5/site_perl/man/man3/Image::Sane.3 /usr/bin/strip /construction/graphics/p5-Image-Sane/stage/usr/local/lib/perl5/site_perl/mach/5.32/auto/Image/Sane/Sane.so ====> Compressing man pages (compress-man) ====> Running Q/A tests (stage-qa) Error: /usr/local/lib/perl5/site_perl/mach/5.32/auto/Image/Sane/Sane.so is linked to /usr/local/lib/libxml2.so.2 from textproc/libxml2 but it is not declared as a dependency Warning: you need USE_GNOME+=libxml2 Notice: You have some Perl modules as dependencies but you do not have devel/p5-Module-CoreList installed, the perlcore QA check gets better results when using it, especially with older Perl versions. Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks SUCCEEDED 00:00:04 ------------------------------------------------------------------------------- -- Phase: check-plist ------------------------------------------------------------------------------- ====> Checking for pkg-plist issues (check-plist) ===> Parsing plist ===> Checking for items in STAGEDIR missing from pkg-plist ===> Checking for items in pkg-plist which are not in STAGEDIR ===> No pkg-plist issues found (check-plist) SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for p5-Image-Sane-5_1 file sizes/checksums [5]: 0% file sizes/checksums [5]: 100% Service unavailablepacking files [5]: 0% packing files [5]: 100% packing directories [0]: 0% packing directories [0]: 100% SUCCEEDED 00:00:00 TOTAL TIME 00:00:47