------------------------------------------------------------------------------- -- Phase: Environment ------------------------------------------------------------------------------- NO_DEPENDS=1 FLAVOR=nox11 UNAME_r=6.5 UNAME_m=x86_64 UNAME_p=x86_64 UNAME_v=unknown UNAME_s=DragonFly PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin SSL_NO_VERIFY_PEER=1 LANG=C HOME=/root USER=root TERM=dumb SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: showconfig ------------------------------------------------------------------------------- ===> The following configuration options are available for qemu-nox11-8.0.2_1: CAPSTONE=off: Disassembly framework support CDROM_DMA=on: IDE CDROM DMA CURL=on: Data transfer support via cURL DEBUG=off: Build with debugging support DOCS=on: Build and/or install documentation GNUTLS=on: gnutls dependency (vnc encryption) ISCSI=off: libiscsi dependency (iSCSI client for emulated drives) JPEG=on: jpeg dependency (vnc lossy compression) PNG=on: png dependency (vnc compression) SAMBA=off: samba dependency (for -smb) SASL=on: cyrus-sasl dependency (vnc encryption) SPICE=off: SPICE protocol support STATIC_LINK=off: Statically link the executables STRIP=off: Strip binaries before installation USBREDIR=off: usb device network redirection (experimental!) VDE=on: vde dependency (for vde networking) X86_TARGETS=off: Build only x86 system targets ====> Console (text) interface support: you have to select exactly one of them NCURSES_BASE=off: Depend on ncurses in base NCURSES_DEFAULT=on: Depend on ncurses (ports if installed, otherwise base) NCURSES_PORT=off: Depend on devel/ncurses in ports ===> Use 'make config' to modify these settings SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: CONFIGURE_ENV ------------------------------------------------------------------------------- MAKE=gmake ac_cv_path_PERL=/usr/local/bin/perl ac_cv_path_PERL_PATH=/usr/local/bin/perl PERL_USE_UNSAFE_INC=1 PKG_CONFIG=pkgconf PYTHON="/usr/local/bin/python3.9" XDG_DATA_HOME=/construction/emulators/qemu XDG_CONFIG_HOME=/construction/emulators/qemu XDG_CACHE_HOME=/construction/emulators/qemu/.cache HOME=/construction/emulators/qemu TMPDIR="/tmp" PATH=/construction/emulators/qemu/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin PKG_CONFIG_LIBDIR=/construction/emulators/qemu/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig SHELL=/bin/sh CONFIG_SHELL=/bin/sh CCVER=gcc80 LANG=en_US.UTF-8 LC_ALL=en_US.UTF-8 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: CONFIGURE_ARGS ------------------------------------------------------------------------------- --cc=cc --disable-kvm --disable-linux-aio --disable-linux-user --disable-xen --extra-cflags=-I/construction/emulators/qemu/qemu-8.0.2\ -I/usr/local/include\ -DPREFIX=\\\"\"/usr/local\\\"\" --extra-ldflags=-L/usr/local/lib --extra-ldflags=-L/usr/lib --localstatedir=/var --mandir=/usr/local/man --prefix=/usr/local --python=/usr/local/bin/python3.9 --disable-guest-agent --enable-fdt=system --enable-netmap --disable-netmap --disable-stack-protector --enable-curses --disable-capstone --enable-docs --disable-gtk --disable-vte --disable-libiscsi --disable-opengl --disable-spice --disable-strip --disable-usb-redir --disable-sdl SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: MAKE_ENV ------------------------------------------------------------------------------- NINJA_STATUS="[%p %s/%t] " PERL_USE_UNSAFE_INC=1 XDG_DATA_HOME=/construction/emulators/qemu XDG_CONFIG_HOME=/construction/emulators/qemu XDG_CACHE_HOME=/construction/emulators/qemu/.cache HOME=/construction/emulators/qemu TMPDIR="/tmp" PATH=/construction/emulators/qemu/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin PKG_CONFIG_LIBDIR=/construction/emulators/qemu/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc80 DESTDIR=/construction/emulators/qemu/stage LANG=en_US.UTF-8 LC_ALL=en_US.UTF-8 PREFIX=/usr/local LOCALBASE=/usr/local NOPROFILE=1 CC="cc" CFLAGS="-pipe -I/usr/local/include -I/usr/local/include/ncurses -O2 -fno-strict-aliasing " CPP="cpp" CPPFLAGS="" LDFLAGS=" -L/usr/local/lib -Wl,-rpath=/usr/local/lib " LIBS="" CXX="c++" CXXFLAGS=" -pipe -I/usr/local/include -I/usr/local/include/ncurses -O2 -fno-strict-aliasing " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: MAKE_ARGS ------------------------------------------------------------------------------- ARCH=x86_64 -v SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: PLIST_SUB ------------------------------------------------------------------------------- PORTDOCS="" CAPSTONE="@comment " NO_CAPSTONE="" CDROM_DMA="" NO_CDROM_DMA="@comment " CURL="" NO_CURL="@comment " DEBUG="@comment " NO_DEBUG="" DOCS="" NO_DOCS="@comment " GNUTLS="" NO_GNUTLS="@comment " GTK3="@comment " NO_GTK3="" ISCSI="@comment " NO_ISCSI="" JPEG="" NO_JPEG="@comment " NCURSES_BASE="@comment " NO_NCURSES_BASE="" NCURSES_DEFAULT="" NO_NCURSES_DEFAULT="@comment " NCURSES_PORT="@comment " NO_NCURSES_PORT="" OPENGL="@comment " NO_OPENGL="" PNG="" NO_PNG="@comment " SAMBA="@comment " NO_SAMBA="" SASL="" NO_SASL="@comment " SPICE="@comment " NO_SPICE="" STATIC_LINK="@comment " NO_STATIC_LINK="" STRIP="@comment " NO_STRIP="" USBREDIR="@comment " NO_USBREDIR="" VDE="" NO_VDE="@comment " X11="@comment " NO_X11="" X86_TARGETS="@comment " NO_X86_TARGETS="" BSDUSER="" LINUXBOOT_DMA="" GTK2_VERSION="2.10.0" GTK3_VERSION="3.0.0" GTK4_VERSION="4.0.0" PYTHON_INCLUDEDIR=include/python3.9 PYTHON_LIBDIR=lib/python3.9 PYTHON_PLATFORM=dragonfly6 PYTHON_SITELIBDIR=lib/python3.9/site-packages PYTHON_SUFFIX=39 PYTHON_EXT_SUFFIX=.cpython-39 PYTHON_VER=3.9 PYTHON_VERSION=python3.9 PYTHON2="@comment " PYTHON3="" OSREL=6.5 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib PERL_VERSION=5.32.1 PERL_VER=5.32 PERL5_MAN1=lib/perl5/site_perl/man/man1 PERL5_MAN3=lib/perl5/site_perl/man/man3 SITE_PERL=lib/perl5/site_perl SITE_ARCH=lib/perl5/site_perl/mach/5.32 PROFILE="@comment " DOCSDIR="share/doc/qemu" EXAMPLESDIR="share/examples/qemu" DATADIR="share/qemu" WWWDIR="www/qemu" ETCDIR="etc/qemu" SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: SUB_LIST ------------------------------------------------------------------------------- CAPSTONE="@comment " NO_CAPSTONE="" CDROM_DMA="" NO_CDROM_DMA="@comment " CURL="" NO_CURL="@comment " DEBUG="@comment " NO_DEBUG="" DOCS="" NO_DOCS="@comment " GNUTLS="" NO_GNUTLS="@comment " GTK3="@comment " NO_GTK3="" ISCSI="@comment " NO_ISCSI="" JPEG="" NO_JPEG="@comment " NCURSES_BASE="@comment " NO_NCURSES_BASE="" NCURSES_DEFAULT="" NO_NCURSES_DEFAULT="@comment " NCURSES_PORT="@comment " NO_NCURSES_PORT="" OPENGL="@comment " NO_OPENGL="" PNG="" NO_PNG="@comment " SAMBA="@comment " NO_SAMBA="" SASL="" NO_SASL="@comment " SPICE="@comment " NO_SPICE="" STATIC_LINK="@comment " NO_STATIC_LINK="" STRIP="@comment " NO_STRIP="" USBREDIR="@comment " NO_USBREDIR="" VDE="" NO_VDE="@comment " X11="@comment " NO_X11="" X86_TARGETS="@comment " NO_X86_TARGETS="" PYTHON_INCLUDEDIR=/usr/local/include/python3.9 PYTHON_LIBDIR=/usr/local/lib/python3.9 PYTHON_PLATFORM=dragonfly6 PYTHON_SITELIBDIR=/usr/local/lib/python3.9/site-packages PYTHON_SUFFIX=39 PYTHON_EXT_SUFFIX=.cpython-39 PYTHON_VER=3.9 PYTHON_VERSION=python3.9 PYTHON2="@comment " PYTHON3="" PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/qemu DOCSDIR=/usr/local/share/doc/qemu EXAMPLESDIR=/usr/local/share/examples/qemu WWWDIR=/usr/local/www/qemu ETCDIR=/usr/local/etc/qemu SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: /etc/make.conf ------------------------------------------------------------------------------- DPORTS_BUILDER=yes DISABLE_LICENSES=yes DEFAULT_VERSIONS=ssl=openssl FORCE_PACKAGE=yes DEVELOPER=yes DFLY_STING_XFAIL=yes USE_PACKAGE_DEPENDS_ONLY=yes PORTSDIR=/xports PORT_DBDIR=/options PKG_DBDIR=/var/db/pkg PKG_CACHEDIR=/var/cache/pkg PKG_COMPRESSION_FORMAT=.tgz DEVELOPER=1 WITH_CCACHE_BUILD=yes CCACHE_DIR=/ccache UID=0 ARCH=x86_64 OPSYS=DragonFly DFLYVERSION=600503 OSVERSION=9999999 OSREL=6.5 _OSRELEASE=6.5-SYNTH DISTDIR=/distfiles WRKDIRPREFIX=/construction BATCH=yes PACKAGE_BUILDING=yes PKG_CREATE_VERBOSE=yes MAKE_JOBS_NUMBER=13 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/indexinfo-0.3.1.pkg Installing /packages/All/gettext-runtime-0.21.1.pkg Installing /packages/All/ncurses-6.4.pkg ===== Message from ncurses-6.4: -- To get the terminfo database please install the terminfo-db package: pkg install terminfo-db Installing /packages/All/readline-8.2.1.pkg Installing /packages/All/bash-5.2.15.pkg Installing /packages/All/libffi-3.4.4.pkg Installing /packages/All/expat-2.5.0.pkg Installing /packages/All/mpdecimal-2.5.1.pkg Installing /packages/All/openssl-1.1.1u,1.pkg Installing /packages/All/python39-3.9.17.pkg ===== Message from python39-3.9.17: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py39-gdbm databases/py-gdbm@py39 py39-sqlite3 databases/py-sqlite3@py39 py39-tkinter x11-toolkits/py-tkinter@py39 Installing /packages/All/py39-setuptools-63.1.0_1.pkg Installing /packages/All/py39-sphinx_rtd_theme-1.0.0.pkg Installing /packages/All/py39-sphinxcontrib-applehelp-1.0.2.pkg Installing /packages/All/py39-sphinxcontrib-devhelp-1.0.2.pkg Installing /packages/All/py39-sphinxcontrib-jsmath-1.0.1.pkg Installing /packages/All/py39-sphinxcontrib-htmlhelp-2.0.0.pkg Installing /packages/All/py39-sphinxcontrib-serializinghtml-1.1.5.pkg Installing /packages/All/py39-sphinxcontrib-qthelp-1.0.3.pkg Installing /packages/All/py39-markupsafe-2.1.3.pkg Installing /packages/All/py39-pytz-2023.3,1.pkg Installing /packages/All/py39-Babel-2.12.1.pkg Installing /packages/All/py39-Jinja2-3.1.2.pkg Installing /packages/All/py39-pygments-2.15.1.pkg Installing /packages/All/py39-docutils-0.19,1.pkg Installing /packages/All/py39-pystemmer-2.0.1.pkg Installing /packages/All/py39-snowballstemmer-2.2.0.pkg Installing /packages/All/py39-alabaster-0.7.13.pkg Installing /packages/All/py39-imagesize-1.4.1.pkg Installing /packages/All/py39-certifi-2023.5.7.pkg Installing /packages/All/py39-charset-normalizer-3.1.0.pkg Installing /packages/All/py39-idna-3.4_1.pkg Installing /packages/All/py39-pysocks-1.7.1.pkg Installing /packages/All/py39-pycparser-2.21.pkg Installing /packages/All/py39-cffi-1.15.1.pkg Installing /packages/All/py39-cryptography-3.4.8_1,1.pkg Installing /packages/All/py39-six-1.16.0.pkg Installing /packages/All/py39-openssl-21.0.0,1.pkg Installing /packages/All/py39-urllib3-1.26.16,1.pkg ===== Message from py39-urllib3-1.26.16,1: -- Since version 1.25 HTTPS connections are now verified by default which is done via "cert_reqs = 'CERT_REQUIRED'". While certificate verification can be disabled via "cert_reqs = 'CERT_NONE'", it's highly recommended to leave it on. Various consumers of net/py-urllib3 already have implemented routines that either explicitly enable or disable HTTPS certificate verification (e.g. via configuration settings, CLI arguments, etc.). Yet it may happen that there are still some consumers which don't explicitly enable/disable certificate verification for HTTPS connections which could then lead to errors (as is often the case with self-signed certificates). In case of an error one should try first to temporarily disable certificate verification of the problematic urllib3 consumer to see if that approach will remedy the issue. Installing /packages/All/py39-requests-2.31.0.pkg Installing /packages/All/py39-packaging-23.1.pkg Installing /packages/All/ca_root_nss-3.89.1.pkg ===== Message from ca_root_nss-3.89.1: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/py39-zipp-3.15.0.pkg Installing /packages/All/py39-importlib-metadata-6.7.0.pkg Installing /packages/All/py39-sphinx-5.3.0_1,1.pkg Installing /packages/All/gmake-4.3_2.pkg Installing /packages/All/ninja-1.11.1,2.pkg Installing /packages/All/pkgconf-1.8.1,1.pkg Installing /packages/All/perl5-5.32.1_3.pkg Installing /packages/All/pixman-0.42.2.pkg Installing /packages/All/libXau-1.0.9.pkg Installing /packages/All/xorgproto-2022.1_1.pkg Installing /packages/All/libXdmcp-1.1.3.pkg Installing /packages/All/libxcb-1.15_1.pkg Installing /packages/All/libX11-1.8.6,1.pkg Installing /packages/All/ccache-3.7.12_4.pkg Create compiler links... create symlink for cc create symlink for cc (world) create symlink for c++ create symlink for c++ (world) create symlink for CC create symlink for CC (world) create symlink for gcc create symlink for gcc (world) create symlink for g++ create symlink for g++ (world) ===== Message from ccache-3.7.12_4: -- NOTE: Please read /usr/local/share/doc/ccache/ccache-howto-freebsd.txt for information on using ccache with FreeBSD ports and src. Installing /packages/All/libyaml-0.2.5.pkg Installing /packages/All/dtc-1.6.0.pkg Installing /packages/All/liblz4-1.9.4,1.pkg Installing /packages/All/zstd-1.5.5.pkg Installing /packages/All/pcre2-10.42.pkg Installing /packages/All/libxml2-2.10.4.pkg Installing /packages/All/libiconv-1.17.pkg Installing /packages/All/glib-2.76.4,2.pkg Generating GIO modules cache Compiling glib schemas No schema files found: doing nothing. Installing /packages/All/libslirp-4.7.0.pkg Installing /packages/All/libnghttp2-1.53.0.pkg Installing /packages/All/libssh2-1.11.0,3.pkg Installing /packages/All/libunistring-1.1.pkg Installing /packages/All/libidn2-2.3.4.pkg Installing /packages/All/libpsl-0.21.2_3.pkg Installing /packages/All/curl-8.1.2.pkg Installing /packages/All/gmp-6.2.1.pkg Installing /packages/All/nettle-3.9.1.pkg Installing /packages/All/libtasn1-4.19.0.pkg Installing /packages/All/p11-kit-0.24.1_2.pkg Installing /packages/All/gnutls-3.7.9.pkg Installing /packages/All/png-1.6.39.pkg Installing /packages/All/cyrus-sasl-2.1.28.pkg *** Added group `cyrus' (id 60) *** Added user `cyrus' (id 60) ===== Message from cyrus-sasl-2.1.28: -- You can use sasldb2 for authentication, to add users use: saslpasswd2 -c username If you want to enable SMTP AUTH with the system Sendmail, read Sendmail.README NOTE: This port has been compiled with a default pwcheck_method of auxprop. If you want to authenticate your user by /etc/passwd, PAM or LDAP, install ports/security/cyrus-sasl2-saslauthd and set sasl_pwcheck_method to saslauthd after installing the Cyrus-IMAPd 2.X port. You should also check the /usr/local/lib/sasl2/*.conf files for the correct pwcheck_method. If you want to use GSSAPI mechanism, install ports/security/cyrus-sasl2-gssapi. If you want to use SRP mechanism, install ports/security/cyrus-sasl2-srp. If you want to use LDAP auxprop plugin, install ports/security/cyrus-sasl2-ldapdb. Installing /packages/All/libpcap-1.10.4.pkg Installing /packages/All/vde2-2.3.3.pkg ===== Message from vde2-2.3.3: -- ===> NOTICE: The vde2 port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://docs.freebsd.org/en/articles/contributing/#ports-contributing Installing /packages/All/argp-standalone-1.5.0.pkg Installing /packages/All/elfutils-0.179.pkg ===== Message from elfutils-0.179: -- To use this port add: CFLAGS+= -I/usr/local/include/elfutils -I/usr/local/include LDFLAGS+= -L/usr/local/lib/elfutils -Wl,-rpath,/usr/local/lib/elfutils Installing /packages/All/jpeg-turbo-2.1.5.1.pkg SUCCEEDED 00:00:24 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> qemu-nox11-8.0.2_1 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> qemu-nox11-8.0.2_1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by qemu-nox11-8.0.2_1 for building SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> qemu-nox11-8.0.2_1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by qemu-nox11-8.0.2_1 for building => SHA256 Checksum OK for qemu/8.0.2/qemu-8.0.2.tar.xz. SUCCEEDED 00:00:03 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> qemu-nox11-8.0.2_1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by qemu-nox11-8.0.2_1 for building ===> Extracting for qemu-nox11-8.0.2_1 ===> qemu-nox11-8.0.2_1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by qemu-nox11-8.0.2_1 for building => SHA256 Checksum OK for qemu/8.0.2/qemu-8.0.2.tar.xz. Extracted Memory Use: 775.50M SUCCEEDED 00:00:51 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for qemu-nox11-8.0.2_1 ===> Applying ports patches for qemu-nox11-8.0.2_1 from /xports/emulators/qemu/files ===> Applying dragonfly patches for qemu-nox11-8.0.2_1 from /xports/emulators/qemu/dragonfly 1 out of 1 hunks failed--saving rejects to include/qemu/bswap.h.rej ===> FAILED Applying dragonfly patch-include_qemu_bswap.h ===> Cleanly applied dragonfly patch(es) patch-block.c patch-hw-ppc_newworld.c patch-hw_ppc_mac__oldworld.c ===> FAILED to apply cleanly dragonfly patch(es) patch-include_qemu_bswap.h *** Error code 1 Stop. make[1]: stopped in /xports/emulators/qemu *** Error code 1 Stop. make: stopped in /xports/emulators/qemu FAILED 00:00:01