------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/libnghttp2-1.41.0.txz Installing /packages/All/ca_root_nss-3.56.txz ===== Message from ca_root_nss-3.56: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/openssl-1.1.1g,1.txz Installing /packages/All/curl-7.72.0.txz Installing /packages/All/expat-2.2.8.txz Installing /packages/All/libuv-1.39.0.txz Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gettext-runtime-0.21.txz Installing /packages/All/rhash-1.3.9.txz Installing /packages/All/liblz4-1.9.2_1,1.txz Installing /packages/All/lzo2-2.10_1.txz Installing /packages/All/libarchive-3.4.3,1.txz Installing /packages/All/ncurses-6.2.20200831.txz Installing /packages/All/cmake-3.18.2.txz Installing /packages/All/pkgconf-1.7.3,1.txz Installing /packages/All/libffi-3.3_1.txz Installing /packages/All/readline-8.0.4.txz Installing /packages/All/python37-3.7.9.txz ===== Message from python37-3.7.9: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py37-gdbm databases/py-gdbm@py37 py37-sqlite3 databases/py-sqlite3@py37 py37-tkinter x11-toolkits/py-tkinter@py37 Installing /packages/All/xorgproto-2020.1.txz Installing /packages/All/qtchooser-66_3.txz ===== Message from qtchooser-66_3: -- qtchooser is a wrapper that allows selecting whether Qt4 or Qt5 binaries for qmake, moc and other tools will be run when invoking the binaries in $PATH. By default, the Qt5 versions are run. It is possible to change the behavior by setting the QT_SELECT environment variable to "qt4". See qtchooser(1) for more information. Installing /packages/All/perl5-5.32.0.txz Installing /packages/All/qt5-buildtools-5.15.0.txz Installing /packages/All/double-conversion-3.1.5.19.txz Installing /packages/All/icu-67.1,1.txz Installing /packages/All/pcre2-10.35.txz Installing /packages/All/zstd-1.4.5_1.txz Installing /packages/All/pcre-8.44.txz Installing /packages/All/libxml2-2.9.10.txz Installing /packages/All/libiconv-1.16.txz Installing /packages/All/glib-2.56.3_9,1.txz No schema files found: doing nothing. Installing /packages/All/qt5-core-5.15.0_2.txz Installing /packages/All/libICE-1.0.10,1.txz Installing /packages/All/libSM-1.2.3,1.txz Installing /packages/All/libpthread-stubs-0.4.txz Installing /packages/All/libXau-1.0.9.txz Installing /packages/All/libXdmcp-1.1.3.txz Installing /packages/All/libxcb-1.13.1.txz Installing /packages/All/libX11-1.6.12,1.txz Installing /packages/All/dbus-1.12.20.txz ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. Installing /packages/All/libevdev-1.5.9.txz Installing /packages/All/freetype2-2.10.2.txz ===== Message from freetype2-2.10.2: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). Installing /packages/All/fontconfig-2.13.92_2,1.txz Running fc-cache to build fontconfig cache... Font directories: /usr/local/share/fonts /usr/local/lib/X11/fonts /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded Installing /packages/All/graphite2-1.3.14.txz Installing /packages/All/harfbuzz-2.7.2.txz Installing /packages/All/libudev-devd-0.4.2.txz Installing /packages/All/libmtdev-1.1.5_2.txz Installing /packages/All/py37-setuptools-44.0.0.txz Installing /packages/All/py37-evdev-0.8.1_1.txz Installing /packages/All/py37-six-1.15.0.txz Installing /packages/All/py37-pyudev-0.22.0.txz Installing /packages/All/libinput-1.12.6_1.txz Installing /packages/All/png-1.6.37.txz Installing /packages/All/xcb-util-0.4.0_2,1.txz Installing /packages/All/xcb-util-image-0.4.0_1.txz Installing /packages/All/xcb-util-keysyms-0.4.0_1.txz Installing /packages/All/xcb-util-renderutil-0.3.9_1.txz Installing /packages/All/xcb-util-wm-0.4.1_3.txz Installing /packages/All/xkeyboard-config-2.30.txz Installing /packages/All/libxkbcommon-0.10.0_2.txz ===== Message from libxkbcommon-0.10.0_2: -- If arrow keys don't work under X11 switch to legacy rules e.g., For sh/bash/ksh/zsh run and (optionally) add into ~/.profile: export XKB_DEFAULT_RULES=xorg For csh/tcsh run and (optionally) add into ~/.login: setenv XKB_DEFAULT_RULES xorg Installing /packages/All/wayland-1.18.0.txz Installing /packages/All/pciids-20200819.txz Installing /packages/All/libpciaccess-0.16.txz Installing /packages/All/libdrm-2.4.101.txz Installing /packages/All/libXfixes-5.0.3_2.txz Installing /packages/All/libXdamage-1.1.5.txz Installing /packages/All/libXext-1.3.4,1.txz Installing /packages/All/libxshmfence-1.3.txz Installing /packages/All/libXxf86vm-1.1.4_3.txz Installing /packages/All/libXrender-0.9.10_2.txz Installing /packages/All/libXrandr-1.5.2.txz Installing /packages/All/mesa-libs-19.0.8_2.txz Installing /packages/All/jpeg-turbo-2.0.4.txz Installing /packages/All/qt5-dbus-5.15.0.txz Installing /packages/All/qt5-network-5.15.0.txz Installing /packages/All/hicolor-icon-theme-0.17.txz Installing /packages/All/xprop-1.2.4.txz Installing /packages/All/libXt-1.2.0,1.txz Installing /packages/All/libXmu-1.1.3,1.txz Installing /packages/All/xset-1.2.4_3.txz Installing /packages/All/xdg-utils-1.1.3_1.txz Installing /packages/All/vulkan-headers-1.2.135.0.txz Installing /packages/All/encodings-1.0.5,1.txz Installing /packages/All/libfontenc-1.1.4.txz Installing /packages/All/mkfontscale-1.2.1.txz Installing /packages/All/font-bh-ttf-1.0.3_4.txz Installing /packages/All/font-misc-meltho-1.0.3_4.txz Installing /packages/All/font-misc-ethiopic-1.0.4.txz Installing /packages/All/dejavu-2.37_1.txz ===== Message from dejavu-2.37_1: -- Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Installing /packages/All/xorg-fonts-truetype-7.7_1.txz Installing /packages/All/libXi-1.7.10,1.txz Installing /packages/All/qt5-gui-5.15.0.txz Installing /packages/All/libdaemon-0.14_1.txz Installing /packages/All/dbus-glib-0.110.txz Installing /packages/All/gdbm-1.18.1_1.txz Installing /packages/All/gobject-introspection-1.56.1_1,1.txz Installing /packages/All/gnome_subr-1.0.txz Installing /packages/All/avahi-app-0.7_3.txz ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. Installing /packages/All/gmp-6.2.0.txz Installing /packages/All/nettle-3.6.txz Installing /packages/All/libtasn1-4.16.0.txz Installing /packages/All/libunistring-0.9.10_1.txz Installing /packages/All/libidn2-2.3.0_1.txz Installing /packages/All/bash-5.0.18_3.txz Installing /packages/All/bash-completion-2.11,2.txz ===== Message from bash-completion-2.11,2: -- To enable the bash completion library, add the following to your .bashrc file: [[ $PS1 && -f /usr/local/share/bash-completion/bash_completion.sh ]] && \ source /usr/local/share/bash-completion/bash_completion.sh See /usr/local/share/doc/bash-completion/README.md for more information. Installing /packages/All/p11-kit-0.23.21.txz Installing /packages/All/tpm-emulator-0.7.4_2.txz ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. Installing /packages/All/trousers-0.3.14_3.txz ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. ===== Message from trousers-0.3.14_3: -- To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Installing /packages/All/gnutls-3.6.15.txz Installing /packages/All/libpaper-1.1.24.4.txz Installing /packages/All/cups-2.3.3_1.txz ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. Installing /packages/All/qt5-widgets-5.15.0.txz Installing /packages/All/qt5-printsupport-5.15.0.txz Installing /packages/All/qt5-xml-5.15.0.txz Installing /packages/All/qt5-sql-5.15.0.txz ===== Message from qt5-sql-5.15.0: -- To enable Qt database support, install the database plugin ports. The following plugin ports are available: - databases/qt5-sqldrivers-ibase InterBase/Firebird - databases/qt5-sqldrivers-mysql MySQL - databases/qt5-sqldrivers-odbc Open Database Connectivity - databases/qt5-sqldrivers-pgsql PostgreSQL - databases/qt5-sqldrivers-sqlite2 SQLite 2 - databases/qt5-sqldrivers-sqlite3 SQLite 3 - databases/qt5-sqldrivers-tds FreeTDS Installing /packages/All/libedit-3.1.20191231,1.txz Installing /packages/All/sqlite3-3.33.0,1.txz Installing /packages/All/qt5-sqldrivers-sqlite3-5.15.0.txz Installing /packages/All/qt5-help-5.15.0.txz Installing /packages/All/qt5-assistant-5.15.0.txz Installing /packages/All/qt5-linguisttools-5.15.0.txz Installing /packages/All/qt5-linguist-5.15.0.txz Installing /packages/All/qt5-qmake-5.15.0.txz Installing /packages/All/capstone4-4.0.1.txz Installing /packages/All/radare2-4.5.0.txz Installing /packages/All/qt5-testlib-5.15.0.txz Installing /packages/All/qt5-declarative-5.15.0_1.txz Installing /packages/All/qt5-concurrent-5.15.0.txz Installing /packages/All/qt5-serialport-5.15.0.txz Installing /packages/All/qt5-location-5.15.0.txz Installing /packages/All/qt5-svg-5.15.0.txz Installing /packages/All/qt5-webchannel-5.15.0.txz Installing /packages/All/aom-2.0.0_1.txz Installing /packages/All/fribidi-0.19.7.txz Installing /packages/All/libass-0.14.0.txz Installing /packages/All/dav1d-0.7.1.txz Installing /packages/All/opencv-core-3.4.1_36.txz ===== Message from opencv-core-3.4.1_36: -- ===> NOTICE: The opencv-core port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/opus-1.3.1.txz Installing /packages/All/libogg-1.3.4,4.txz Installing /packages/All/libvorbis-1.3.7_2,3.txz Installing /packages/All/libtheora-1.1.1_7.txz Installing /packages/All/argp-standalone-1.3_4.txz ===== Message from argp-standalone-1.3_4: -- ===> NOTICE: The argp-standalone port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/libv4l-1.18.0.txz Installing /packages/All/libva-2.8.0.txz Installing /packages/All/libvdpau-1.4.txz Installing /packages/All/libvpx-1.9.0.txz Installing /packages/All/libx264-0.160.3011.txz Installing /packages/All/x265-3.2.1_4.txz Installing /packages/All/xvid-1.3.7,1.txz Installing /packages/All/ffmpeg-4.3.1_1,1.txz Installing /packages/All/libevent-2.1.12.txz Installing /packages/All/jsoncpp-1.9.3.txz Installing /packages/All/jbigkit-2.1_1.txz Installing /packages/All/tiff-4.1.0.txz Installing /packages/All/lcms2-2.11_1.txz Installing /packages/All/nspr-4.28.txz Installing /packages/All/nss-3.56.txz Installing /packages/All/libpci-3.7.0.txz Installing /packages/All/re2-20200401.txz Installing /packages/All/snappy-1.1.8.txz Installing /packages/All/giflib-5.2.1.txz Installing /packages/All/webp-1.1.0.txz Installing /packages/All/alsa-lib-1.1.2_2.txz ===== Message from alsa-lib-1.1.2_2: -- ===> NOTICE: The alsa-lib port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/libgpg-error-1.39.txz Installing /packages/All/libgcrypt-1.8.5.txz Installing /packages/All/libxslt-1.1.34_1.txz Installing /packages/All/alsa-plugins-1.1.1_6.txz ===== Message from alsa-plugins-1.1.1_6: -- ===> NOTICE: The alsa-plugins port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/libXcomposite-0.4.5,1.txz Installing /packages/All/libXcursor-1.2.0.txz Installing /packages/All/libXScrnSaver-1.2.3_2.txz Installing /packages/All/libXtst-1.2.3_2.txz Installing /packages/All/qt5-uiplugin-5.15.0.txz Installing /packages/All/qt5-designer-5.15.0.txz Installing /packages/All/qt5-webengine-5.15.0_2.txz ===== Message from qt5-webengine-5.15.0_2: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. SUCCEEDED 00:02:09 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> radare-cutter-1.11.1 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> radare-cutter-1.11.1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by radare-cutter-1.11.1 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> radare-cutter-1.11.1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by radare-cutter-1.11.1 for building => SHA256 Checksum OK for radareorg-cutter-v1.11.1_GH0.tar.gz. => SHA256 Checksum OK for radareorg-cutter-translations-d576ccc_GH0.tar.gz. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> radare-cutter-1.11.1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by radare-cutter-1.11.1 for building ===> Extracting for radare-cutter-1.11.1 => SHA256 Checksum OK for radareorg-cutter-v1.11.1_GH0.tar.gz. => SHA256 Checksum OK for radareorg-cutter-translations-d576ccc_GH0.tar.gz. Extracted Memory Use: 11.19M SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for radare-cutter-1.11.1 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> radare-cutter-1.11.1 depends on file: /usr/local/bin/cmake - found ===> radare-cutter-1.11.1 depends on package: pkgconf>=1.3.0_1 - found ===> radare-cutter-1.11.1 depends on file: /usr/local/bin/python3.7 - found ===> radare-cutter-1.11.1 depends on package: xorgproto>=0 - found ===> radare-cutter-1.11.1 depends on file: /usr/local/lib/qt5/bin/moc - found ===> radare-cutter-1.11.1 depends on file: /usr/local/lib/qt5/bin/linguist - found ===> radare-cutter-1.11.1 depends on file: /usr/local/lib/qt5/bin/qmake - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- ===> radare-cutter-1.11.1 depends on shared library: libr_bin.so - found (/usr/local/lib/libr_bin.so) ===> radare-cutter-1.11.1 depends on shared library: libGL.so - found (/usr/local/lib/libGL.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5Core.so - found (/usr/local/lib/qt5/libQt5Core.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5Qml.so - found (/usr/local/lib/qt5/libQt5Qml.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5Gui.so - found (/usr/local/lib/qt5/libQt5Gui.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5Location.so - found (/usr/local/lib/qt5/libQt5Location.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5Network.so - found (/usr/local/lib/qt5/libQt5Network.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5PrintSupport.so - found (/usr/local/lib/qt5/libQt5PrintSupport.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5Svg.so - found (/usr/local/lib/qt5/libQt5Svg.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5WebChannel.so - found (/usr/local/lib/qt5/libQt5WebChannel.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5WebEngine.so - found (/usr/local/lib/qt5/libQt5WebEngine.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5Widgets.so - found (/usr/local/lib/qt5/libQt5Widgets.so) SUCCEEDED 00:00:02 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> radare-cutter-1.11.1 depends on file: /usr/local/bin/cmake - found ===> radare-cutter-1.11.1 depends on package: pkgconf>=1.3.0_1 - found ===> radare-cutter-1.11.1 depends on file: /usr/local/bin/python3.7 - found ===> radare-cutter-1.11.1 depends on package: xorgproto>=0 - found ===> radare-cutter-1.11.1 depends on file: /usr/local/lib/qt5/bin/moc - found ===> radare-cutter-1.11.1 depends on file: /usr/local/lib/qt5/bin/linguist - found ===> radare-cutter-1.11.1 depends on file: /usr/local/lib/qt5/bin/qmake - found ===> radare-cutter-1.11.1 depends on shared library: libr_bin.so - found (/usr/local/lib/libr_bin.so) ===> radare-cutter-1.11.1 depends on shared library: libGL.so - found (/usr/local/lib/libGL.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5Core.so - found (/usr/local/lib/qt5/libQt5Core.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5Qml.so - found (/usr/local/lib/qt5/libQt5Qml.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5Gui.so - found (/usr/local/lib/qt5/libQt5Gui.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5Location.so - found (/usr/local/lib/qt5/libQt5Location.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5Network.so - found (/usr/local/lib/qt5/libQt5Network.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5PrintSupport.so - found (/usr/local/lib/qt5/libQt5PrintSupport.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5Svg.so - found (/usr/local/lib/qt5/libQt5Svg.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5WebChannel.so - found (/usr/local/lib/qt5/libQt5WebChannel.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5WebEngine.so - found (/usr/local/lib/qt5/libQt5WebEngine.so) ===> radare-cutter-1.11.1 depends on shared library: libQt5Widgets.so - found (/usr/local/lib/qt5/libQt5Widgets.so) ===> Configuring for radare-cutter-1.11.1 ===> Performing out-of-source build /bin/mkdir -p /construction/x11/radare-cutter/.build -- The C compiler identification is GNU 8.3.0 -- The CXX compiler identification is GNU 8.3.0 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /usr/bin/cc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done -- Found PkgConfig: pkgconf (found version "1.7.3") -- Checking for one of the modules 'r_core' -- Found Radare2: Radare2::libr CMake Warning at CMakeLists.txt:97 (find_package): By not providing "FindKF5SyntaxHighlighting.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "KF5SyntaxHighlighting", but CMake did not find one. Could not find a package configuration file provided by "KF5SyntaxHighlighting" with any of the following names: KF5SyntaxHighlightingConfig.cmake kf5syntaxhighlighting-config.cmake Add the installation prefix of "KF5SyntaxHighlighting" to CMAKE_PREFIX_PATH or set "KF5SyntaxHighlighting_DIR" to a directory containing one of the above files. If "KF5SyntaxHighlighting" provides a separate development package or SDK, be sure it has been installed. -- Checking for module 'libgvc' -- Package 'libgvc', required by 'virtual:world', not found -- Could NOT find Graphviz (missing: GVC_INCLUDE_DIRS) -- -- Building Cutter version 1.11.1 -- Options: -- - Bundled radare2: OFF -- - Python: OFF -- - Python Bindings: OFF -- - Crash Handling: OFF -- - KSyntaxHighlighting: OFF (KSyntaxHighlighting not found) -- - Graphviz: FALSE -- -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: BOOST_PYTHON_SUFFIX CMAKE_CXX_FLAGS_DEBUG CMAKE_C_FLAGS_DEBUG CMAKE_C_FLAGS_RELEASE CMAKE_MODULE_LINKER_FLAGS CMAKE_SHARED_LINKER_FLAGS Python_ADDITIONAL_VERSIONS THREADS_HAVE_PTHREAD_ARG -- Build files have been written to: /construction/x11/radare-cutter/.build SUCCEEDED 00:00:02 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for radare-cutter-1.11.1 /usr/local/bin/cmake -S/construction/x11/radare-cutter/cutter-1.11.1/src -B/construction/x11/radare-cutter/.build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/local/bin/cmake -E cmake_progress_start /construction/x11/radare-cutter/.build/CMakeFiles /construction/x11/radare-cutter/.build//CMakeFiles/progress.marks /usr/bin/make -f CMakeFiles/Makefile2 all --- CMakeFiles/translations.dir/all --- --- CMakeFiles/Cutter_autogen.dir/all --- --- CMakeFiles/translations.dir/all --- /usr/bin/make -f CMakeFiles/translations.dir/build.make CMakeFiles/translations.dir/depend --- CMakeFiles/Cutter_autogen.dir/all --- /usr/bin/make -f CMakeFiles/Cutter_autogen.dir/build.make CMakeFiles/Cutter_autogen.dir/depend --- CMakeFiles/Cutter_autogen.dir/depend --- --- CMakeFiles/translations.dir/all --- --- CMakeFiles/translations.dir/depend --- --- CMakeFiles/Cutter_autogen.dir/all --- cd /construction/x11/radare-cutter/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/x11/radare-cutter/cutter-1.11.1/src /construction/x11/radare-cutter/cutter-1.11.1/src /construction/x11/radare-cutter/.build /construction/x11/radare-cutter/.build /construction/x11/radare-cutter/.build/CMakeFiles/Cutter_autogen.dir/DependInfo.cmake --- CMakeFiles/translations.dir/all --- cd /construction/x11/radare-cutter/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/x11/radare-cutter/cutter-1.11.1/src /construction/x11/radare-cutter/cutter-1.11.1/src /construction/x11/radare-cutter/.build /construction/x11/radare-cutter/.build /construction/x11/radare-cutter/.build/CMakeFiles/translations.dir/DependInfo.cmake --- CMakeFiles/Cutter_autogen.dir/all --- Scanning dependencies of target Cutter_autogen --- CMakeFiles/translations.dir/all --- Scanning dependencies of target translations --- CMakeFiles/Cutter_autogen.dir/all --- /usr/bin/make -f CMakeFiles/Cutter_autogen.dir/build.make CMakeFiles/Cutter_autogen.dir/build --- CMakeFiles/translations.dir/all --- /usr/bin/make -f CMakeFiles/translations.dir/build.make CMakeFiles/translations.dir/build --- CMakeFiles/Cutter_autogen.dir/all --- --- CMakeFiles/Cutter_autogen --- --- CMakeFiles/translations.dir/all --- --- translations/cutter_ar.qm --- --- translations/cutter_ca.qm --- --- translations/cutter_cn.qm --- --- translations/cutter_de.qm --- --- translations/cutter_es.qm --- --- translations/cutter_fa.qm --- --- translations/cutter_fr.qm --- --- translations/cutter_he.qm --- --- translations/cutter_hi.qm --- --- CMakeFiles/Cutter_autogen.dir/all --- [ 0%] Automatic MOC and UIC for target Cutter /usr/local/bin/cmake -E cmake_autogen /construction/x11/radare-cutter/.build/CMakeFiles/Cutter_autogen.dir/AutogenInfo.json Release --- CMakeFiles/translations.dir/all --- --- translations/cutter_de.qm --- [ 1%] Generating translations/cutter_de.qm --- translations/cutter_fa.qm --- [ 2%] Generating translations/cutter_fa.qm --- translations/cutter_de.qm --- /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_de.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_de.qm --- translations/cutter_cn.qm --- [ 3%] Generating translations/cutter_cn.qm --- translations/cutter_es.qm --- [ 3%] Generating translations/cutter_es.qm --- translations/cutter_fr.qm --- [ 3%] Generating translations/cutter_fr.qm --- translations/cutter_he.qm --- [ 4%] Generating translations/cutter_he.qm --- translations/cutter_fa.qm --- /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_fa.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_fa.qm --- translations/cutter_cn.qm --- /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_cn.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_cn.qm --- translations/cutter_es.qm --- /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_es.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_es.qm --- translations/cutter_hi.qm --- [ 4%] Generating translations/cutter_hi.qm --- translations/cutter_fr.qm --- /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_fr.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_fr.qm --- translations/cutter_he.qm --- /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_he.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_he.qm --- translations/cutter_hi.qm --- /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_hi.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_hi.qm --- translations/cutter_ar.qm --- [ 5%] Generating translations/cutter_ar.qm /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_ar.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_ar.qm --- translations/cutter_ca.qm --- [ 5%] Generating translations/cutter_ca.qm /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_ca.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_ca.qm --- translations/cutter_he.qm --- Updating '/construction/x11/radare-cutter/.build/translations/cutter_he.qm'... Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Generated 1420 translation(s) (150 finished and 1270 unfinished) --- translations/cutter_it.qm --- --- translations/cutter_ca.qm --- Updating '/construction/x11/radare-cutter/.build/translations/cutter_ca.qm'... Generated 1420 translation(s) (810 finished and 610 unfinished) --- translations/cutter_ja.qm --- [ 6%] Generating translations/cutter_ja.qm /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_ja.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_ja.qm --- translations/cutter_es.qm --- Updating '/construction/x11/radare-cutter/.build/translations/cutter_es.qm'... --- translations/cutter_ja.qm --- Updating '/construction/x11/radare-cutter/.build/translations/cutter_ja.qm'... --- translations/cutter_es.qm --- Generated 1420 translation(s) (903 finished and 517 unfinished) --- translations/cutter_ja.qm --- Generated 1420 translation(s) (614 finished and 806 unfinished) --- translations/cutter_nl.qm --- --- translations/cutter_pt.qm --- --- translations/cutter_cn.qm --- Updating '/construction/x11/radare-cutter/.build/translations/cutter_cn.qm'... Generated 1420 translation(s) (1149 finished and 271 unfinished) --- translations/cutter_nl.qm --- [ 6%] Generating translations/cutter_nl.qm --- translations/cutter_ro.qm --- --- translations/cutter_nl.qm --- /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_nl.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_nl.qm --- translations/cutter_de.qm --- Updating '/construction/x11/radare-cutter/.build/translations/cutter_de.qm'... --- translations/cutter_fr.qm --- Updating '/construction/x11/radare-cutter/.build/translations/cutter_fr.qm'... --- translations/cutter_ro.qm --- [ 6%] Generating translations/cutter_ro.qm /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_ro.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_ro.qm --- translations/cutter_de.qm --- Generated 1420 translation(s) (1159 finished and 261 unfinished) --- translations/cutter_ru.qm --- --- translations/cutter_fr.qm --- Generated 1420 translation(s) (1292 finished and 128 unfinished) --- translations/cutter_pt.qm --- [ 7%] Generating translations/cutter_pt.qm /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_pt.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_pt.qm --- translations/cutter_ro.qm --- Updating '/construction/x11/radare-cutter/.build/translations/cutter_ro.qm'... Generated 1420 translation(s) (818 finished and 602 unfinished) --- translations/cutter_tr.qm --- [ 9%] Generating translations/cutter_tr.qm --- translations/cutter_ru.qm --- [ 9%] Generating translations/cutter_ru.qm --- translations/cutter_nl.qm --- Updating '/construction/x11/radare-cutter/.build/translations/cutter_nl.qm'... --- translations/cutter_tr.qm --- /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_tr.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_tr.qm --- translations/cutter_ru.qm --- /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_ru.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_ru.qm --- translations/cutter_nl.qm --- Generated 1420 translation(s) (1234 finished and 186 unfinished) --- translations/cutter_ar.qm --- Updating '/construction/x11/radare-cutter/.build/translations/cutter_ar.qm'... Generated 1420 translation(s) (256 finished and 1164 unfinished) --- translations/cutter_fa.qm --- Updating '/construction/x11/radare-cutter/.build/translations/cutter_fa.qm'... --- translations/cutter_pt.qm --- Updating '/construction/x11/radare-cutter/.build/translations/cutter_pt.qm'... --- translations/cutter_hi.qm --- Updating '/construction/x11/radare-cutter/.build/translations/cutter_hi.qm'... --- translations/cutter_ru.qm --- Updating '/construction/x11/radare-cutter/.build/translations/cutter_ru.qm'... --- translations/cutter_fa.qm --- Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Generated 1420 translation(s) (558 finished and 862 unfinished) --- translations/cutter_tr.qm --- Updating '/construction/x11/radare-cutter/.build/translations/cutter_tr.qm'... --- translations/cutter_pt.qm --- Generated 1420 translation(s) (630 finished and 790 unfinished) --- translations/cutter_hi.qm --- Generated 1420 translation(s) (45 finished and 1375 unfinished) --- translations/cutter_ru.qm --- Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Generated 1420 translation(s) (1411 finished and 9 unfinished) --- translations/cutter_tr.qm --- Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Generated 1420 translation(s) (794 finished and 626 unfinished) --- translations/cutter_it.qm --- [ 10%] Generating translations/cutter_it.qm /usr/local/lib/qt5/bin/lrelease /construction/x11/radare-cutter/cutter-1.11.1/src/translations/cutter_it.ts -qm /construction/x11/radare-cutter/.build/translations/cutter_it.qm Updating '/construction/x11/radare-cutter/.build/translations/cutter_it.qm'... Generated 1420 translation(s) (745 finished and 675 unfinished) [ 10%] Built target translations --- CMakeFiles/Cutter_autogen.dir/all --- AutoMoc: /construction/x11/radare-cutter/cutter-1.11.1/src/common/PythonManager.h:0: Note: No relevant classes found. No output generated. AutoUic: /construction/x11/radare-cutter/cutter-1.11.1/src/core/MainWindow.ui: Warning: action `actionSearch' not declared [ 10%] Built target Cutter_autogen --- CMakeFiles/Cutter.dir/all --- /usr/bin/make -f CMakeFiles/Cutter.dir/build.make CMakeFiles/Cutter.dir/depend make[3]: make[3]: don't know how to make /construction/x11/radare-cutter/cutter-1.11.1/src/fonts/Anonymous\. Stop make[3]: stopped in /construction/x11/radare-cutter/.build *** [CMakeFiles/Cutter.dir/all] Error code 2 make[2]: stopped in /construction/x11/radare-cutter/.build 1 error make[2]: stopped in /construction/x11/radare-cutter/.build *** [all] Error code 2 make[1]: stopped in /construction/x11/radare-cutter/.build 1 error make[1]: stopped in /construction/x11/radare-cutter/.build ===> Compilation failed unexpectedly. Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to the maintainer. *** Error code 1 Stop. make: stopped in /xports/x11/radare-cutter FAILED 00:00:12