-------------------------------------------------------------------------------
-- Phase: setup
-------------------------------------------------------------------------------

Installing /packages/All/indexinfo-0.3.1.txz
Installing /packages/All/gettext-runtime-0.21.txz
Installing /packages/All/gsed-4.8.txz
Installing /packages/All/pciids-20200819.txz
Installing /packages/All/libpciaccess-0.16.txz
Installing /packages/All/libxml2-2.9.10.txz
Installing /packages/All/hwloc-1.11.11.txz
Installing /packages/All/gmp-6.2.0.txz
Installing /packages/All/mpfr-4.1.0.txz
Installing /packages/All/mpc-1.1.0_2.txz
UNFLAVORED devel/binutils -> use devel/binutils@native
Installing /packages/All/binutils-2.33.1_3,1.txz
Installing /packages/All/gcc8-8.4.0.txz
=====
Message from gcc8-8.4.0:

--
To ensure binaries built with this toolchain find appropriate versions
of the necessary run-time libraries, you may want to link using

  -Wl,-rpath=/usr/local/lib/gcc8

For ports leveraging USE_GCC, USES=compiler, or USES=fortran this happens
transparently.
Installing /packages/All/perl5-5.32.0.txz
Installing /packages/All/mpich-3.2.1_6.txz
=====
Message from mpich-3.2.1_6:

--
===>   NOTICE:

The mpich port currently does not have a maintainer. As a result, it is
more likely to have unresolved issues, not be up-to-date, or even be removed in
the future. To volunteer to maintain this port, please create an issue at:

https://bugs.freebsd.org/bugzilla

More information about port maintainership is available at:

https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port
Installing /packages/All/scotch-6.0.4.a7_1.txz
Installing /packages/All/png-1.6.37.txz
Installing /packages/All/jpeg-turbo-2.0.4.txz
Installing /packages/All/expat-2.2.8.txz
Installing /packages/All/libffi-3.3_1.txz
Installing /packages/All/wayland-1.18.0.txz
Installing /packages/All/libdrm-2.4.101.txz
Installing /packages/All/libpthread-stubs-0.4.txz
Installing /packages/All/libXau-1.0.9.txz
Installing /packages/All/xorgproto-2020.1.txz
Installing /packages/All/libXdmcp-1.1.3.txz
Installing /packages/All/libxcb-1.13.1.txz
Installing /packages/All/libX11-1.6.12,1.txz
Installing /packages/All/libXfixes-5.0.3_2.txz
Installing /packages/All/libXdamage-1.1.5.txz
Installing /packages/All/libXext-1.3.4,1.txz
Installing /packages/All/libxshmfence-1.3.txz
Installing /packages/All/libXxf86vm-1.1.4_3.txz
Installing /packages/All/libXrender-0.9.10_2.txz
Installing /packages/All/libXrandr-1.5.2.txz
Installing /packages/All/mesa-libs-19.0.8_2.txz
Installing /packages/All/libGLU-9.0.1.txz
Installing /packages/All/libICE-1.0.10,1.txz
Installing /packages/All/libXi-1.7.10,1.txz
Installing /packages/All/freeglut-3.0.0_2.txz
=====
Message from freeglut-3.0.0_2:

--
Joystick support is untested and it is unknown if it works.

Do not hesitate to contact x11@FreeBSD.org if this causes issues.
Installing /packages/All/libSM-1.2.3,1.txz
Installing /packages/All/libXt-1.2.0,1.txz
Installing /packages/All/libXmu-1.1.3,1.txz
Installing /packages/All/jasper-2.0.16_1.txz
Installing /packages/All/jbigkit-2.1_1.txz
Installing /packages/All/tiff-4.1.0.txz
Installing /packages/All/netpbm-10.91.01.txz
Installing /packages/All/freetype2-2.10.2.txz
=====
Message from freetype2-2.10.2:

--
The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as
the default, emulating a modern version of ClearType. This change inevitably
leads to different rendering results, and you might change port's options to
adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment
variable).

The environment variable "FREETYPE_PROPERTIES" can be used to control the
driver properties. Example:

FREETYPE_PROPERTIES=truetype:interpreter-version=35 \
	cff:no-stem-darkening=1 \
	autofitter:warping=1

This allows to select, say, the subpixel hinting mode at runtime for a given
application.

If LONG_PCF_NAMES port's option was enabled, the PCF family names may include
the foundry and information whether they contain wide characters. For example,
"Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at
run time with using pcf:no-long-family-names property, if needed. Example:

FREETYPE_PROPERTIES=pcf:no-long-family-names=1

How to recreate fontconfig cache with using such environment variable,
if needed:
# env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv

The controllable properties are listed in the section "Controlling FreeType
Modules" in the reference's table of contents
(/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed).
Installing /packages/All/fontconfig-2.13.92_2,1.txz
Running fc-cache to build fontconfig cache...
Font directories:
	/usr/local/share/fonts
	/usr/local/lib/X11/fonts
/usr/local/share/fonts: skipping, no such directory
/usr/local/lib/X11/fonts: skipping, no such directory
/var/db/fontconfig: cleaning cache directory
fc-cache: succeeded
Installing /packages/All/libidn-1.35.txz
Installing /packages/All/openssl-1.1.1g,1.txz
Installing /packages/All/jbig2dec-0.18.txz
Installing /packages/All/libpaper-1.1.24.4.txz
Installing /packages/All/libdaemon-0.14_1.txz
Installing /packages/All/dbus-1.12.20.txz
===> Creating groups.
Creating group 'messagebus' with gid '556'.
===> Creating users
Creating user 'messagebus' with uid '556'.
Installing /packages/All/pcre-8.44.txz
Installing /packages/All/libiconv-1.16.txz
Installing /packages/All/ncurses-6.2.20200831.txz
Installing /packages/All/readline-8.0.4.txz
Installing /packages/All/python37-3.7.9.txz
=====
Message from python37-3.7.9:

--
Note that some standard Python modules are provided as separate ports
as they require additional dependencies. They are available as:

py37-gdbm       databases/py-gdbm@py37
py37-sqlite3    databases/py-sqlite3@py37
py37-tkinter    x11-toolkits/py-tkinter@py37
Installing /packages/All/glib-2.56.3_9,1.txz
No schema files found: doing nothing.
Installing /packages/All/dbus-glib-0.110.txz
Installing /packages/All/gdbm-1.18.1_1.txz
Installing /packages/All/gobject-introspection-1.56.1_1,1.txz
Installing /packages/All/gnome_subr-1.0.txz
Installing /packages/All/avahi-app-0.7_3.txz
===> Creating groups.
Creating group 'avahi' with gid '558'.
===> Creating users
Creating user 'avahi' with uid '558'.
Installing /packages/All/nettle-3.6.txz
Installing /packages/All/libtasn1-4.16.0.txz
Installing /packages/All/libunistring-0.9.10_1.txz
Installing /packages/All/libidn2-2.3.0_1.txz
Installing /packages/All/ca_root_nss-3.56.txz
=====
Message from ca_root_nss-3.56:

--
FreeBSD does not, and can not warrant that the certification authorities
whose certificates are included in this package have in any way been
audited for trustworthiness or RFC 3647 compliance.

Assessment and verification of trust is the complete responsibility of the
system administrator.


This package installs symlinks to support root certificates discovery by
default for software that uses OpenSSL.

This enables SSL Certificate Verification by client software without manual
intervention.

If you prefer to do this manually, replace the following symlinks with
either an empty file or your site-local certificate bundle.

  * /etc/ssl/cert.pem
  * /usr/local/etc/ssl/cert.pem
  * /usr/local/openssl/cert.pem
Installing /packages/All/bash-5.0.18_3.txz
Installing /packages/All/bash-completion-2.11,2.txz
=====
Message from bash-completion-2.11,2:

--
To enable the bash completion library, add the following to
your .bashrc file:

[[ $PS1 && -f /usr/local/share/bash-completion/bash_completion.sh ]] && \
	source /usr/local/share/bash-completion/bash_completion.sh

See /usr/local/share/doc/bash-completion/README.md for more information.
Installing /packages/All/p11-kit-0.23.21.txz
Installing /packages/All/tpm-emulator-0.7.4_2.txz
===> Creating groups.
Creating group '_tss' with gid '601'.
===> Creating users
Creating user '_tss' with uid '601'.
Installing /packages/All/trousers-0.3.14_3.txz
===> Creating groups.
Using existing group '_tss'.
===> Creating users
Using existing user '_tss'.
=====
Message from trousers-0.3.14_3:

--
To run tcsd automatically, add the following line to /etc/rc.conf:

tcsd_enable="YES"

You might want to edit /usr/local/etc/tcsd.conf to reflect your setup.

If you want to use tcsd with software TPM emulator, use the following
configuration in /etc/rc.conf:

tcsd_enable="YES"
tcsd_mode="emulator"
tpmd_enable="YES"

To use TPM, add your_account to '_tss' group like following:

# pw groupmod _tss -m your_account
Installing /packages/All/gnutls-3.6.15.txz
Installing /packages/All/cups-2.3.3_1.txz
===> Creating groups.
Creating group 'cups' with gid '193'.
===> Creating users
Creating user 'cups' with uid '193'.
Installing /packages/All/poppler-data-0.4.9_5.txz
Installing /packages/All/ghostscript9-agpl-base-9.52_8.txz
=====
Message from ghostscript9-agpl-base-9.52_8:

--
This package installs a script named dvipdf that depends on dvips.  If you
want to use this script you need to install print/tex-dvipsk.
Installing /packages/All/libXpm-3.5.13.txz
Installing /packages/All/transfig-3.2.5e_4.txz
Installing /packages/All/libltdl-2.4.6.txz
Installing /packages/All/giflib-5.2.1.txz
Installing /packages/All/webp-1.1.0.txz
Installing /packages/All/libgd-2.3.0,1.txz
Installing /packages/All/pixman-0.40.0_1.txz
Installing /packages/All/cairo-1.16.0,2.txz
Installing /packages/All/graphite2-1.3.14.txz
Installing /packages/All/harfbuzz-2.7.2.txz
Installing /packages/All/fribidi-0.19.7.txz
Installing /packages/All/libfontenc-1.1.4.txz
Installing /packages/All/mkfontscale-1.2.1.txz
Installing /packages/All/font-bh-ttf-1.0.3_4.txz
Installing /packages/All/font-misc-meltho-1.0.3_4.txz
Installing /packages/All/font-misc-ethiopic-1.0.4.txz
Installing /packages/All/encodings-1.0.5,1.txz
Installing /packages/All/dejavu-2.37_1.txz
=====
Message from dejavu-2.37_1:

--
Make sure that the freetype module is loaded.  If it is not, add the following
line to the "Modules" section of your X Windows configuration file:

	Load "freetype"

Add the following line to the "Files" section of X Windows configuration file:

	FontPath "/usr/local/share/fonts/dejavu/"

Note: your X Windows configuration file is typically /etc/X11/XF86Config
if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org.
Installing /packages/All/xorg-fonts-truetype-7.7_1.txz
Installing /packages/All/libXft-2.3.3.txz
Installing /packages/All/pango-1.42.4_4.txz
Installing /packages/All/libXaw-1.0.13_3,2.txz
Installing /packages/All/graphviz-2.44.1_1.txz
Installing /packages/All/tex-kpathsea-6.2.1_2.txz
Installing /packages/All/lcms2-2.11_1.txz
Installing /packages/All/openjpeg15-1.5.2_1.txz
Installing /packages/All/zziplib-0.13.71_1.txz
Installing /packages/All/tex-ptexenc-1.3.3_2.txz
Installing /packages/All/tex-web2c-20150521_3.txz
Installing /packages/All/tex-basic-engines-20150521.txz
Installing /packages/All/texlive-tlmgr-20150523_2.txz
Installing /packages/All/icu-67.1,1.txz
Installing /packages/All/t1lib-5.1.2_5,1.txz
Installing /packages/All/teckit-2.5.7.txz
Installing /packages/All/harfbuzz-icu-2.7.2.txz
Installing /packages/All/nspr-4.28.txz
Installing /packages/All/libedit-3.1.20191231,1.txz
Installing /packages/All/sqlite3-3.33.0,1.txz
Installing /packages/All/nss-3.56.txz
Installing /packages/All/openjpeg-2.3.1.txz
Installing /packages/All/poppler-20.08.0_1.txz
Installing /packages/All/libpotrace-1.16.txz
Installing /packages/All/psutils-1.17_5.txz
Installing /packages/All/xpdfopen-0.86.txz
Installing /packages/All/texlive-base-20150521_54.txz
Installing /packages/All/texlive-texmf-20150523_4.txz
Installing /packages/All/tex-formats-20150521_2.txz
Installing /packages/All/tex-dvipsk-5.995_2.txz
Installing /packages/All/doxygen-1.8.15_3,2.txz
Installing /packages/All/py37-setuptools-44.0.0.txz
Installing /packages/All/py37-sphinxcontrib-applehelp-1.0.2.txz
Installing /packages/All/py37-sphinxcontrib-devhelp-1.0.2.txz
Installing /packages/All/py37-sphinxcontrib-jsmath-1.0.1.txz
Installing /packages/All/py37-sphinxcontrib-htmlhelp-1.0.3.txz
Installing /packages/All/py37-sphinxcontrib-serializinghtml-1.1.4.txz
Installing /packages/All/py37-sphinxcontrib-qthelp-1.0.3.txz
Installing /packages/All/py37-MarkupSafe-1.1.1.txz
Installing /packages/All/py37-pytz-2020.1,1.txz
Installing /packages/All/py37-Babel-2.8.0.txz
Installing /packages/All/py37-Jinja2-2.10.1.txz
Installing /packages/All/py37-pygments-2.5.2.txz
Installing /packages/All/py37-docutils-0.15.2.txz
Installing /packages/All/py37-pystemmer-2.0.0.1.txz
Installing /packages/All/py37-snowballstemmer-1.2.1.txz
Installing /packages/All/py37-alabaster-0.7.6.txz
Installing /packages/All/py37-imagesize-1.1.0.txz
Installing /packages/All/py37-certifi-2020.6.20.txz
Installing /packages/All/py37-chardet-3.0.4_3.txz
Installing /packages/All/py37-idna-2.8.txz
Installing /packages/All/py37-pysocks-1.7.1.txz
Installing /packages/All/py37-asn1crypto-1.3.0.txz
Installing /packages/All/py37-pycparser-2.20.txz
Installing /packages/All/py37-cffi-1.14.2.txz
Installing /packages/All/py37-six-1.15.0.txz
Installing /packages/All/py37-cryptography-2.6.1.txz
Installing /packages/All/py37-openssl-19.0.0.txz
Installing /packages/All/py37-urllib3-1.25.10,1.txz
=====
Message from py37-urllib3-1.25.10,1:

--
Since version 1.25 HTTPS connections are now verified by default which is done
via "cert_reqs = 'CERT_REQUIRED'".  While certificate verification can be
disabled via "cert_reqs = 'CERT_NONE'", it's highly recommended to leave it on.

Various consumers of net/py-urllib3 already have implemented routines that
either explicitly enable or disable HTTPS certificate verification (e.g. via
configuration settings, CLI arguments, etc.).

Yet it may happen that there are still some consumers which don't explicitly
enable/disable certificate verification for HTTPS connections which could then
lead to errors (as is often the case with self-signed certificates).

In case of an error one should try first to temporarily disable certificate
verification of the problematic urllib3 consumer to see if that approach will
remedy the issue.
Installing /packages/All/py37-requests-2.22.0.txz
Installing /packages/All/py37-pyparsing-2.4.7.txz
Installing /packages/All/py37-packaging-20.4.txz
Installing /packages/All/py37-sphinx-3.2.1,1.txz
Installing /packages/All/libtextstyle-0.21.txz
Installing /packages/All/m4-1.4.18_1,1.txz
Installing /packages/All/bison-3.6.4,1.txz
Installing /packages/All/gettext-tools-0.21.txz
Installing /packages/All/gmake-4.3_2.txz
Installing /packages/All/double-conversion-3.1.5.19.txz
Installing /packages/All/pcre2-10.35.txz
Installing /packages/All/liblz4-1.9.2_1,1.txz
Installing /packages/All/zstd-1.4.5_1.txz
Installing /packages/All/qtchooser-66_3.txz
=====
Message from qtchooser-66_3:

--
qtchooser is a wrapper that allows selecting whether Qt4 or Qt5 binaries for
qmake, moc and other tools will be run when invoking the binaries in $PATH.

By default, the Qt5 versions are run. It is possible to change the behavior by
setting the QT_SELECT environment variable to "qt4". See qtchooser(1) for more
information.
Installing /packages/All/qt5-core-5.15.0_2.txz
Installing /packages/All/libevdev-1.5.9.txz
Installing /packages/All/libudev-devd-0.4.2.txz
Installing /packages/All/libmtdev-1.1.5_2.txz
Installing /packages/All/py37-evdev-0.8.1_1.txz
Installing /packages/All/py37-pyudev-0.22.0.txz
Installing /packages/All/libinput-1.12.6_1.txz
Installing /packages/All/xcb-util-0.4.0_2,1.txz
Installing /packages/All/xcb-util-image-0.4.0_1.txz
Installing /packages/All/xcb-util-keysyms-0.4.0_1.txz
Installing /packages/All/xcb-util-renderutil-0.3.9_1.txz
Installing /packages/All/xcb-util-wm-0.4.1_3.txz
Installing /packages/All/xkeyboard-config-2.30.txz
Installing /packages/All/libxkbcommon-0.10.0_2.txz
=====
Message from libxkbcommon-0.10.0_2:

--
If arrow keys don't work under X11 switch to legacy rules e.g.,

For sh/bash/ksh/zsh run and (optionally) add into ~/.profile:
  export XKB_DEFAULT_RULES=xorg

For csh/tcsh run and (optionally) add into ~/.login:
  setenv XKB_DEFAULT_RULES xorg
Installing /packages/All/qt5-dbus-5.15.0.txz
Installing /packages/All/qt5-network-5.15.0.txz
Installing /packages/All/hicolor-icon-theme-0.17.txz
Installing /packages/All/xprop-1.2.4.txz
Installing /packages/All/xset-1.2.4_3.txz
Installing /packages/All/xdg-utils-1.1.3_1.txz
Installing /packages/All/vulkan-headers-1.2.135.0.txz
Installing /packages/All/qt5-gui-5.15.0.txz
Installing /packages/All/qt5-widgets-5.15.0.txz
Installing /packages/All/qt5-printsupport-5.15.0.txz
Installing /packages/All/qscintilla2-qt5-2.11.4.txz
Installing /packages/All/py37-sip-4.19.21,1.txz
Installing /packages/All/py37-qt5-core-5.13.1_1.txz
Installing /packages/All/lcms-1.19_6,1.txz
Installing /packages/All/libmng-1.0.10_3.txz
Installing /packages/All/qt5-imageformats-5.15.0.txz
Installing /packages/All/py37-qt5-gui-5.13.1_1.txz
Installing /packages/All/py37-qt5-widgets-5.13.1_1.txz
Installing /packages/All/qt5-xml-5.15.0.txz
Installing /packages/All/py37-qt5-xml-5.13.1_1.txz
Installing /packages/All/autoconf-wrapper-20131203.txz
Installing /packages/All/autoconf-2.69_3.txz
Installing /packages/All/automake-1.16.2.txz
Installing /packages/All/libtool-2.4.6_1.txz
Installing /packages/All/libsysinfo-0.0.3_2.txz
Installing /packages/All/hdf-szip-2.1.1.txz
Installing /packages/All/hdf5-1.10.6,1.txz
Installing /packages/All/tcl86-8.6.10.txz
Installing /packages/All/libXScrnSaver-1.2.3_2.txz
Installing /packages/All/tk86-8.6.10_1.txz
Installing /packages/All/libXcomposite-0.4.5,1.txz
Installing /packages/All/libXcursor-1.2.0.txz
Installing /packages/All/libXinerama-1.1.4_2,1.txz
Installing /packages/All/libxkbfile-1.1.0.txz
Installing /packages/All/libXres-1.2.0_2.txz
Installing /packages/All/libXtst-1.2.3_2.txz
Installing /packages/All/libXv-1.0.11_2,1.txz
Installing /packages/All/cgnslib-4.1.1,1.txz
Installing /packages/All/fr-med-4.0.0.txz
Installing /packages/All/metis-5.1.0_8.txz
=====
Message from metis-5.1.0_8:

--
===>   NOTICE:

The metis port currently does not have a maintainer. As a result, it is
more likely to have unresolved issues, not be up-to-date, or even be removed in
the future. To volunteer to maintain this port, please create an issue at:

https://bugs.freebsd.org/bugzilla

More information about port maintainership is available at:

https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port
Installing /packages/All/tbb-2020.3.txz
Installing /packages/All/openblas-0.3.10,1.txz
Installing /packages/All/suitesparse-5.8.1.txz
Installing /packages/All/py37-numpy-1.16.6,1.txz
Installing /packages/All/py37-cycler-0.10.0.txz
Installing /packages/All/py37-dateutil-2.8.1.txz
Installing /packages/All/py37-tornado-5.1.1.txz
Installing /packages/All/py37-kiwisolver-1.1.0,1.txz
Installing /packages/All/py37-tkinter-3.7.9_6.txz
Installing /packages/All/py37-matplotlib-2.2.4_2.txz
Installing /packages/All/xbitmaps-1.1.2.txz
Installing /packages/All/open-motif-2.3.8_1.txz
Installing /packages/All/Xbae-4.60.4_3.txz
=====
Message from Xbae-4.60.4_3:

--
===>   NOTICE:

The Xbae port currently does not have a maintainer. As a result, it is
more likely to have unresolved issues, not be up-to-date, or even be removed in
the future. To volunteer to maintain this port, please create an issue at:

https://bugs.freebsd.org/bugzilla

More information about port maintainership is available at:

https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port
Installing /packages/All/fftw-2.1.5_22.txz
=====
Message from fftw-2.1.5_22:

--
===>   NOTICE:

The fftw port currently does not have a maintainer. As a result, it is
more likely to have unresolved issues, not be up-to-date, or even be removed in
the future. To volunteer to maintain this port, please create an issue at:

https://bugs.freebsd.org/bugzilla

More information about port maintainership is available at:

https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port
Installing /packages/All/libnghttp2-1.41.0.txz
Installing /packages/All/curl-7.72.0.txz
Installing /packages/All/pkgconf-1.7.3,1.txz
Installing /packages/All/netcdf-4.7.3.txz
Installing /packages/All/pdflib-7.0.5_6.txz
Installing /packages/All/XmHTML-1.1.10.txz
=====
Message from XmHTML-1.1.10:

--
===>   NOTICE:

The XmHTML port currently does not have a maintainer. As a result, it is
more likely to have unresolved issues, not be up-to-date, or even be removed in
the future. To volunteer to maintain this port, please create an issue at:

https://bugs.freebsd.org/bugzilla

More information about port maintainership is available at:

https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port
Installing /packages/All/grace-5.1.25_6.txz
=====
Message from grace-5.1.25_6:

--
===>   NOTICE:

The grace port currently does not have a maintainer. As a result, it is
more likely to have unresolved issues, not be up-to-date, or even be removed in
the future. To volunteer to maintain this port, please create an issue at:

https://bugs.freebsd.org/bugzilla

More information about port maintainership is available at:

https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port
Installing /packages/All/xterm-359.txz
=====
Message from xterm-359:

--
You installed xterm with wide chars support. This introduces some limitations
comparing to the plain single chars version: this version of xterm will use
UTF-8 charset for selection buffers, breaking 8-bit copy/paste support unless
you are using UTF-8 or ISO8859-1 locale. If you want 8-bit charset selections to
work as before, use "eightBitSelectTypes" XTerm resource setting.

For further information refer to the SELECT/PASTE section of xterm(1) manual
page.
UNFLAVORED devel/binutils -> use devel/binutils@native

SUCCEEDED 00:05:41

-------------------------------------------------------------------------------
-- Phase: check-sanity
-------------------------------------------------------------------------------


SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: pkg-depends
-------------------------------------------------------------------------------

===>   code_saturne-6.1.1 depends on file: /usr/local/sbin/pkg - found

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: fetch-depends
-------------------------------------------------------------------------------


SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: fetch
-------------------------------------------------------------------------------

===>   code_saturne-6.1.1 depends on file: /usr/local/sbin/pkg - found
===> Fetching all distfiles required by code_saturne-6.1.1 for building

SUCCEEDED 00:00:01

-------------------------------------------------------------------------------
-- Phase: checksum
-------------------------------------------------------------------------------

===>   code_saturne-6.1.1 depends on file: /usr/local/sbin/pkg - found
===> Fetching all distfiles required by code_saturne-6.1.1 for building
=> SHA256 Checksum OK for code-saturne-code_saturne-v6.1.1_GH0.tar.gz.

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: extract-depends
-------------------------------------------------------------------------------


SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: extract
-------------------------------------------------------------------------------

===>   code_saturne-6.1.1 depends on file: /usr/local/sbin/pkg - found
===> Fetching all distfiles required by code_saturne-6.1.1 for building
===>  Extracting for code_saturne-6.1.1
===>   code_saturne-6.1.1 depends on file: /usr/local/sbin/pkg - found
===> Fetching all distfiles required by code_saturne-6.1.1 for building
=> SHA256 Checksum OK for code-saturne-code_saturne-v6.1.1_GH0.tar.gz.

Extracted Memory Use:  63.66M
SUCCEEDED 00:00:03

-------------------------------------------------------------------------------
-- Phase: patch-depends
-------------------------------------------------------------------------------


SUCCEEDED 00:00:01

-------------------------------------------------------------------------------
-- Phase: patch
-------------------------------------------------------------------------------

===>  Patching for code_saturne-6.1.1
/usr/bin/env WRKSRC=/construction/science/code_saturne/code_saturne-6.1.1 REWARNFILE=/construction/science/code_saturne/reinplace_warnings.txt /xports/Mk/Scripts/sed_checked.sh -e '/#define _POSIX_C_SOURCE/d'  /construction/science/code_saturne/code_saturne-6.1.1/src/base/cs_timer.c

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: build-depends
-------------------------------------------------------------------------------

===>   code_saturne-6.1.1 depends on executable: gsed - found
===>   code_saturne-6.1.1 depends on package: scotch>0 - found
===>   code_saturne-6.1.1 depends on executable: fig2dev - found
===>   code_saturne-6.1.1 depends on executable: doxygen - found
===>   code_saturne-6.1.1 depends on executable: dot - found
===>   code_saturne-6.1.1 depends on package: py37-sphinx>=0 - found
===>   code_saturne-6.1.1 depends on file: /usr/local/share/texmf-var/web2c/tex/tex.fmt - found
===>   code_saturne-6.1.1 depends on executable: bison - found
===>   code_saturne-6.1.1 depends on executable: gfortran8 - found
===>   code_saturne-6.1.1 depends on executable: msgfmt - found
===>   code_saturne-6.1.1 depends on package: gmake>=4.3 - found
===>   code_saturne-6.1.1 depends on package: libiconv>=1.14_11 - found
===>   code_saturne-6.1.1 depends on package: py37-qt5-core>=5.13.1 - found
===>   code_saturne-6.1.1 depends on package: py37-qt5-gui>=5.13.1 - found
===>   code_saturne-6.1.1 depends on package: py37-sip>=4.19.21 - found
===>   code_saturne-6.1.1 depends on package: py37-qt5-widgets>=5.13.1 - found
===>   code_saturne-6.1.1 depends on package: py37-qt5-xml>=5.13.1 - found
===>   code_saturne-6.1.1 depends on file: /usr/local/bin/python3.7 - found
===>   code_saturne-6.1.1 depends on file: /usr/local/bin/as - found
===>   code_saturne-6.1.1 depends on package: autoconf>=2.69 - found
===>   code_saturne-6.1.1 depends on package: automake>=1.16.1 - found
===>   code_saturne-6.1.1 depends on executable: libtoolize - found

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: lib-depends
-------------------------------------------------------------------------------

===>   code_saturne-6.1.1 depends on shared library: libsysinfo.so - found (/usr/local/lib/libsysinfo.so)
===>   code_saturne-6.1.1 depends on shared library: libcgns.so - found (/usr/local/lib/libcgns.so)
===>   code_saturne-6.1.1 depends on shared library: libhdf5.so - found (/usr/local/lib/libhdf5.so)
===>   code_saturne-6.1.1 depends on shared library: libmedC.so - found (/usr/local/lib/libmedC.so)
===>   code_saturne-6.1.1 depends on shared library: libmetis.so - found (/usr/local/lib/libmetis.so)
===>   code_saturne-6.1.1 depends on shared library: libintl.so - found (/usr/local/lib/libintl.so)
===>   code_saturne-6.1.1 depends on shared library: libxml2.so - found (/usr/local/lib/libxml2.so)

SUCCEEDED 00:00:01

-------------------------------------------------------------------------------
-- Phase: configure
-------------------------------------------------------------------------------

===>   code_saturne-6.1.1 depends on executable: gsed - found
===>   code_saturne-6.1.1 depends on package: scotch>0 - found
===>   code_saturne-6.1.1 depends on executable: fig2dev - found
===>   code_saturne-6.1.1 depends on executable: doxygen - found
===>   code_saturne-6.1.1 depends on executable: dot - found
===>   code_saturne-6.1.1 depends on package: py37-sphinx>=0 - found
===>   code_saturne-6.1.1 depends on file: /usr/local/share/texmf-var/web2c/tex/tex.fmt - found
===>   code_saturne-6.1.1 depends on executable: bison - found
===>   code_saturne-6.1.1 depends on executable: gfortran8 - found
===>   code_saturne-6.1.1 depends on executable: msgfmt - found
===>   code_saturne-6.1.1 depends on package: gmake>=4.3 - found
===>   code_saturne-6.1.1 depends on package: libiconv>=1.14_11 - found
===>   code_saturne-6.1.1 depends on package: py37-qt5-core>=5.13.1 - found
===>   code_saturne-6.1.1 depends on package: py37-qt5-gui>=5.13.1 - found
===>   code_saturne-6.1.1 depends on package: py37-sip>=4.19.21 - found
===>   code_saturne-6.1.1 depends on package: py37-qt5-widgets>=5.13.1 - found
===>   code_saturne-6.1.1 depends on package: py37-qt5-xml>=5.13.1 - found
===>   code_saturne-6.1.1 depends on file: /usr/local/bin/python3.7 - found
===>   code_saturne-6.1.1 depends on file: /usr/local/bin/as - found
===>   code_saturne-6.1.1 depends on package: autoconf>=2.69 - found
===>   code_saturne-6.1.1 depends on package: automake>=1.16.1 - found
===>   code_saturne-6.1.1 depends on executable: libtoolize - found
===>   code_saturne-6.1.1 depends on shared library: libsysinfo.so - found (/usr/local/lib/libsysinfo.so)
===>   code_saturne-6.1.1 depends on shared library: libcgns.so - found (/usr/local/lib/libcgns.so)
===>   code_saturne-6.1.1 depends on shared library: libhdf5.so - found (/usr/local/lib/libhdf5.so)
===>   code_saturne-6.1.1 depends on shared library: libmedC.so - found (/usr/local/lib/libmedC.so)
===>   code_saturne-6.1.1 depends on shared library: libmetis.so - found (/usr/local/lib/libmetis.so)
===>   code_saturne-6.1.1 depends on shared library: libintl.so - found (/usr/local/lib/libintl.so)
===>   code_saturne-6.1.1 depends on shared library: libxml2.so - found (/usr/local/lib/libxml2.so)
===>  Configuring for code_saturne-6.1.1
/usr/bin/flex -o /construction/science/code_saturne/code_saturne-6.1.1/src/mei/mei_scanner.c /construction/science/code_saturne/code_saturne-6.1.1/src/mei/mei_scanner.l
/usr/local/bin/bison --defines=/construction/science/code_saturne/code_saturne-6.1.1/src/mei/mei_parser.h	 -o /construction/science/code_saturne/code_saturne-6.1.1/src/mei/mei_parser.c /construction/science/code_saturne/code_saturne-6.1.1/src/mei/mei_parser.y
/construction/science/code_saturne/code_saturne-6.1.1/src/mei/mei_parser.y: warning: 19 shift/reduce conflicts [-Wconflicts-sr]
/usr/bin/env WRKSRC=/construction/science/code_saturne/code_saturne-6.1.1 REWARNFILE=/construction/science/code_saturne/reinplace_warnings.txt /xports/Mk/Scripts/sed_checked.sh -e 's|/usr/bin/env python|/usr/local/bin/python3.7|'	 /construction/science/code_saturne/code_saturne-6.1.1/Makefile.am
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
libtoolize: copying file 'build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
configure.ac:125: installing 'build-aux/ar-lib'
configure.ac:117: installing 'build-aux/compile'
configure.ac:64: installing 'build-aux/config.guess'
configure.ac:64: installing 'build-aux/config.sub'
configure.ac:71: installing 'build-aux/install-sh'
configure.ac:71: installing 'build-aux/missing'
pyple/Makefile.am: installing 'build-aux/depcomp'
pyple/Makefile.am:30: installing 'build-aux/py-compile'
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
libtoolize: copying file 'build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
configure.ac:90: installing 'build-aux/compile'
configure.ac:63: installing 'build-aux/config.guess'
configure.ac:63: installing 'build-aux/config.sub'
configure.ac:70: installing 'build-aux/install-sh'
configure.ac:70: installing 'build-aux/missing'
cfd_study/idl/Makefile.am: installing 'build-aux/depcomp'
cfd_study/src/CFDSTUDY/Makefile.am:30: installing 'build-aux/py-compile'
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
libtoolize: copying file 'build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
configure.ac:136: installing 'build-aux/ar-lib'
configure.ac:118: installing 'build-aux/compile'
configure.ac:63: installing 'build-aux/config.guess'
configure.ac:63: installing 'build-aux/config.sub'
configure.ac:70: installing 'build-aux/install-sh'
configure.ac:70: installing 'build-aux/missing'
Makefile.am:247: installing 'build-aux/py-compile'
preprocessor/appli/Makefile.am: installing 'build-aux/depcomp'
configure: loading site script /xports/Templates/config.site
checking build system type... x86_64-portbld-dragonfly5.9
checking host system type... x86_64-portbld-dragonfly5.9
checking target system type... x86_64-portbld-dragonfly5.9
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p
checking for gawk... (cached) /usr/bin/awk
checking whether gmake sets $(MAKE)... yes
checking whether gmake supports nested variables... yes
checking how to create a pax tar archive... gnutar
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether gmake supports nested variables... (cached) yes
configure: WARNING: no supported environment module commmand detected
checking for gcc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking whether cc understands -c and -o together... yes
checking whether gmake supports the include directive... yes (GNU style)
checking dependency style of cc... gcc3
checking whether we are using the GNU C++ compiler... yes
checking whether c++ accepts -g... yes
checking dependency style of c++... gcc3
checking whether we are using the GNU Fortran compiler... yes
checking whether gfortran8 accepts -g... yes
checking whether ln -s works... yes
checking for a sed that does not truncate output... (cached) /usr/local/bin/gsed
checking the archiver (/usr/local/bin/ar) interface... ar
configure: sourcing config/cs_auto_flags.sh (test for known compilers)
compiler 'cc' is GNU gcc-8.3
compiler 'c++' is GNU g++-8.3
compiler 'gfortran8' is GNU gfortran-8.4.0
compiler '' version 
checking how to print strings... printf
checking for a sed that does not truncate output... (cached) /usr/local/bin/gsed
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... (cached) /usr/bin/egrep
checking for fgrep... (cached) /usr/bin/fgrep
checking for ld used by cc... /usr/local/bin/ld
checking if the linker (/usr/local/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/local/bin/nm
checking the name lister (/usr/local/bin/nm) interface... BSD nm
checking the maximum length of command line arguments... (cached) 262144
checking how to convert x86_64-portbld-dragonfly5.9 file names to x86_64-portbld-dragonfly5.9 format... func_convert_file_noop
checking how to convert x86_64-portbld-dragonfly5.9 file names to toolchain format... func_convert_file_noop
checking for /usr/local/bin/ld option to reload object files... -r
checking for objdump... /usr/local/bin/objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... /usr/local/bin/ranlib
checking command to parse /usr/local/bin/nm output from cc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... cpp
checking for ANSI C header files... (cached) yes
checking for sys/types.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for memory.h... (cached) yes
checking for strings.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for unistd.h... (cached) yes
checking for dlfcn.h... (cached) yes
checking for objdir... .libs
checking if cc supports -fno-rtti -fno-exceptions... no
checking for cc option to produce PIC... -fPIC -DPIC
checking if cc PIC flag -fPIC -DPIC works... yes
checking if cc static flag -static works... no
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.o... (cached) yes
checking whether the cc linker (/usr/local/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... dragonfly5.9 ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking how to run the C++ preprocessor... c++ -E
checking for ld used by c++... /usr/local/bin/ld
checking if the linker (/usr/local/bin/ld) is GNU ld... yes
checking whether the c++ linker (/usr/local/bin/ld) supports shared libraries... yes
checking for c++ option to produce PIC... -fPIC -DPIC
checking if c++ PIC flag -fPIC -DPIC works... yes
checking if c++ static flag -static works... yes
checking if c++ supports -c -o file.o... yes
checking if c++ supports -c -o file.o... (cached) yes
checking whether the c++ linker (/usr/local/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... dragonfly5.9 ld.so
checking how to hardcode library paths into programs... immediate
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for gfortran8 option to produce PIC... -fPIC
checking if gfortran8 PIC flag -fPIC works... yes
checking if gfortran8 static flag -static works... yes
checking if gfortran8 supports -c -o file.o... yes
checking if gfortran8 supports -c -o file.o... (cached) yes
checking whether the gfortran8 linker (/usr/local/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... dragonfly5.9 ld.so
checking how to hardcode library paths into programs... immediate
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for size_t... (cached) yes
checking for pid_t... (cached) yes
checking whether time.h and sys/time.h may both be included... yes
checking for stdbool.h that conforms to C99... (cached) yes
checking for _Bool... (cached) yes
checking for long long... (cached) yes
checking for unsigned long long... (cached) yes
checking for int32_t... (cached) yes
checking for int64_t... yes
checking for uint32_t... yes
checking for uint64_t... yes
checking for ptrdiff_t... (cached) yes
checking size of void *... 8
checking size of short... 2
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of float... 4
checking size of double... 8
checking how to get verbose linking output from gfortran8... -v
checking for Fortran libraries of gfortran8...  -L/usr/local/lib/gcc8 -L/usr/local/bin -L/usr/local/lib/gcc8/gcc/x86_64-portbld-dragonfly5.9/8.4.0 -L/usr/local/lib/gcc8/gcc/x86_64-portbld-dragonfly5.9/8.4.0/../../../../../x86_64-portbld-dragonfly5.9/lib -L/usr/local/lib/gcc8/gcc/x86_64-portbld-dragonfly5.9/8.4.0/../../.. -lgfortran -lm -lquadmath
checking for OpenMP (C)... yes
checking for OpenMP simd... yes
checking for OpenMP (Fortran)... yes
checking how to get verbose linking output from gfortran8... (cached) -v
checking for Fortran libraries of gfortran8... (cached)  -L/usr/local/lib/gcc8 -L/usr/local/bin -L/usr/local/lib/gcc8/gcc/x86_64-portbld-dragonfly5.9/8.4.0 -L/usr/local/lib/gcc8/gcc/x86_64-portbld-dragonfly5.9/8.4.0/../../../../../x86_64-portbld-dragonfly5.9/lib -L/usr/local/lib/gcc8/gcc/x86_64-portbld-dragonfly5.9/8.4.0/../../.. -lgfortran -lm -lquadmath
checking whether /usr/local/bin/python3.7 version is >= "2.6"... yes
checking for /usr/local/bin/python3.7 version... 3.7
checking for /usr/local/bin/python3.7 platform... dragonfly5
checking for /usr/local/bin/python3.7 script directory... ${prefix}/lib/python3.7/site-packages
checking for /usr/local/bin/python3.7 extension module directory... ${exec_prefix}/lib/python3.7/site-packages
checking for dlopen... dlopen
checking for MPI (MPI compiler wrapper test)... no
checking mpi.h usability... yes
checking mpi.h presence... yes
checking for mpi.h... yes
checking for MPICH-3 or MPICH2... no
configure: WARNING: no MPI support
checking for ptscotch.h... yes
checking for PT-SCOTCH... no
checking scotch.h usability... yes
checking scotch.h presence... yes
checking for scotch.h... yes
checking for SCOTCH... configure: error: in `/construction/science/code_saturne/code_saturne-6.1.1':
configure: error: PT-SCOTCH/SCOTCH support is requested, but test for SCOTCH failed!
See `config.log' for more details
===>  Script "configure" failed unexpectedly.
Please report the problem to thierry@FreeBSD.org [maintainer] and attach the
"/construction/science/code_saturne/code_saturne-6.1.1/config.log" including
the output of the failure of your make command. Also, it might be a good idea
to provide an overview of all packages installed on your system (e.g. a
/usr/local/sbin/pkg-static info -g -Ea).
*** Error code 1

Stop.
make[1]: stopped in /xports/science/code_saturne
*** Error code 1

Stop.
make: stopped in /xports/science/code_saturne

FAILED 00:02:02