-------------------------------------------------------------------------------
-- Phase: setup
-------------------------------------------------------------------------------

Installing /packages/All/go-1.15.1,1.txz
UNFLAVORED sysutils/ansible -> use sysutils/ansible@py37
Installing /packages/All/indexinfo-0.3.1.txz
Installing /packages/All/libffi-3.3_1.txz
Installing /packages/All/expat-2.2.8.txz
Installing /packages/All/ncurses-6.2.20200831.txz
Installing /packages/All/readline-8.0.4.txz
Installing /packages/All/gettext-runtime-0.21.txz
Installing /packages/All/openssl-1.1.1g,1.txz
Installing /packages/All/python37-3.7.9.txz
=====
Message from python37-3.7.9:

--
Note that some standard Python modules are provided as separate ports
as they require additional dependencies. They are available as:

py37-gdbm       databases/py-gdbm@py37
py37-sqlite3    databases/py-sqlite3@py37
py37-tkinter    x11-toolkits/py-tkinter@py37
Installing /packages/All/py37-setuptools-44.0.0.txz
Installing /packages/All/py37-MarkupSafe-1.1.1.txz
Installing /packages/All/py37-pytz-2020.1,1.txz
Installing /packages/All/py37-Babel-2.8.0.txz
Installing /packages/All/py37-Jinja2-2.10.1.txz
Installing /packages/All/py37-asn1crypto-1.3.0.txz
Installing /packages/All/py37-pycparser-2.20.txz
Installing /packages/All/py37-cffi-1.14.2.txz
Installing /packages/All/py37-six-1.15.0.txz
Installing /packages/All/py37-cryptography-2.6.1.txz
Installing /packages/All/py37-jmespath-0.10.0.txz
Installing /packages/All/py37-netaddr-0.7.19_1.txz
Installing /packages/All/py37-bcrypt-3.1.7.txz
Installing /packages/All/py37-pyasn1-0.4.7.txz
Installing /packages/All/libsodium-1.0.18.txz
Installing /packages/All/py37-pynacl-1.4.0.txz
Installing /packages/All/py37-paramiko-2.7.1.txz
Installing /packages/All/py37-yaml-5.3.1.txz
Installing /packages/All/py37-ansible-2.9.7.txz
=====
Message from py37-ansible-2.9.7:

--
To use Ansible, you need at least a host database.
If you installed examples, you will have a sample
host database and a sample configuration file:

  /usr/local/share/examples/py37-ansible/hosts
  /usr/local/share/examples/py37-ansible/ansible.cfg
Installing /packages/All/pcre-8.44.txz
Installing /packages/All/libnghttp2-1.41.0.txz
Installing /packages/All/ca_root_nss-3.56.txz
=====
Message from ca_root_nss-3.56:

--
FreeBSD does not, and can not warrant that the certification authorities
whose certificates are included in this package have in any way been
audited for trustworthiness or RFC 3647 compliance.

Assessment and verification of trust is the complete responsibility of the
system administrator.


This package installs symlinks to support root certificates discovery by
default for software that uses OpenSSL.

This enables SSL Certificate Verification by client software without manual
intervention.

If you prefer to do this manually, replace the following symlinks with
either an empty file or your site-local certificate bundle.

  * /etc/ssl/cert.pem
  * /usr/local/etc/ssl/cert.pem
  * /usr/local/openssl/cert.pem
Installing /packages/All/curl-7.72.0.txz
Installing /packages/All/cvsps-2.1_2.txz
Installing /packages/All/perl5-5.32.0.txz
Installing /packages/All/p5-HTML-Tagset-3.20_1.txz
Installing /packages/All/p5-HTML-Parser-3.72.txz
Installing /packages/All/p5-CGI-4.50.txz
Installing /packages/All/p5-Error-0.17029.txz
Installing /packages/All/p5-Digest-HMAC-1.03_1.txz
Installing /packages/All/krb5-1.18.2.txz
Installing /packages/All/p5-GSSAPI-0.28_1.txz
Installing /packages/All/p5-Authen-SASL-2.16_1.txz
Installing /packages/All/p5-Net-SSLeay-1.88.txz
Installing /packages/All/p5-Mozilla-CA-20200520.txz
Installing /packages/All/p5-Socket6-0.29.txz
Installing /packages/All/p5-IO-Socket-INET6-2.72_1.txz
Installing /packages/All/p5-IO-Socket-SSL-2.068.txz
Installing /packages/All/p5-Term-ReadKey-2.38_1.txz
Installing /packages/All/gdbm-1.18.1_1.txz
Installing /packages/All/db5-5.3.28_7.txz
Installing /packages/All/apr-1.7.0.1.6.1_1.txz
=====
Message from apr-1.7.0.1.6.1_1:

--
The Apache Portable Runtime project removed support for FreeTDS with
version 1.6. Users requiring MS-SQL connectivity must migrate
configurations to use the added ODBC driver and FreeTDS' ODBC features.
Installing /packages/All/libedit-3.1.20191231,1.txz
Installing /packages/All/sqlite3-3.33.0,1.txz
Installing /packages/All/utf8proc-2.5.0.txz
Installing /packages/All/liblz4-1.9.2_1,1.txz
Installing /packages/All/serf-1.3.9_5.txz
Installing /packages/All/libgpg-error-1.39.txz
Installing /packages/All/libassuan-2.5.3.txz
Installing /packages/All/libgcrypt-1.8.5.txz
Installing /packages/All/libksba-1.4.0.txz
Installing /packages/All/npth-1.6.txz
Installing /packages/All/gmp-6.2.0.txz
Installing /packages/All/nettle-3.6.txz
Installing /packages/All/libtasn1-4.16.0.txz
Installing /packages/All/libunistring-0.9.10_1.txz
Installing /packages/All/libidn2-2.3.0_1.txz
Installing /packages/All/libxml2-2.9.10.txz
Installing /packages/All/libiconv-1.16.txz
Installing /packages/All/glib-2.56.3_9,1.txz
No schema files found: doing nothing.
Installing /packages/All/bash-5.0.18_3.txz
Installing /packages/All/bash-completion-2.11,2.txz
=====
Message from bash-completion-2.11,2:

--
To enable the bash completion library, add the following to
your .bashrc file:

[[ $PS1 && -f /usr/local/share/bash-completion/bash_completion.sh ]] && \
	source /usr/local/share/bash-completion/bash_completion.sh

See /usr/local/share/doc/bash-completion/README.md for more information.
Installing /packages/All/p11-kit-0.23.21.txz
Installing /packages/All/tpm-emulator-0.7.4_2.txz
===> Creating groups.
Creating group '_tss' with gid '601'.
===> Creating users
Creating user '_tss' with uid '601'.
Installing /packages/All/trousers-0.3.14_3.txz
===> Creating groups.
Using existing group '_tss'.
===> Creating users
Using existing user '_tss'.
=====
Message from trousers-0.3.14_3:

--
To run tcsd automatically, add the following line to /etc/rc.conf:

tcsd_enable="YES"

You might want to edit /usr/local/etc/tcsd.conf to reflect your setup.

If you want to use tcsd with software TPM emulator, use the following
configuration in /etc/rc.conf:

tcsd_enable="YES"
tcsd_mode="emulator"
tpmd_enable="YES"

To use TPM, add your_account to '_tss' group like following:

# pw groupmod _tss -m your_account
Installing /packages/All/gnutls-3.6.15.txz
Installing /packages/All/pinentry-tty-1.1.0.txz
Installing /packages/All/pinentry-1.1.0_6.txz
Installing /packages/All/gnupg-2.2.23.txz
=====
Message from gnupg-2.2.23:

--
GnuPG, when run on hosts without IPv6 connectivity, may fail to connect to
dual-stack hkp servers [1].  As a workaround, add

disable-ipv6

to

/usr/local/etc/dirmngr.conf

[1] https://dev.gnupg.org/rGecfc4db3a2f8bc2652ba4ac4de5ca1cd13bfcbec
Installing /packages/All/subversion-1.14.0.txz
Installing /packages/All/p5-subversion-1.14.0.txz
Installing /packages/All/git-2.28.0.txz
===> Creating groups.
Creating group 'git_daemon' with gid '964'.
===> Creating users
Creating user 'git_daemon' with uid '964'.
=====
Message from git-2.28.0:

--
If you installed the GITWEB option please follow these instructions:

In the directory /usr/local/share/examples/git/gitweb you can find all files to
make gitweb work as a public repository on the web.

All you have to do to make gitweb work is:
1) Please be sure you're able to execute CGI scripts in
   /usr/local/share/examples/git/gitweb.
2) Set the GITWEB_CONFIG variable in your webserver's config to
   /usr/local/etc/git/gitweb.conf. This variable is passed to gitweb.cgi.
3) Restart server.


If you installed the CONTRIB option please note that the scripts are
installed in /usr/local/share/git-core/contrib. Some of them require
other ports to be installed (perl, python, etc), which you may need to
install manually.
UNFLAVORED sysutils/ansible -> use sysutils/ansible@py37

SUCCEEDED 00:01:32

-------------------------------------------------------------------------------
-- Phase: check-sanity
-------------------------------------------------------------------------------


SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: pkg-depends
-------------------------------------------------------------------------------

===>   semaphore-2.5.1_1 depends on file: /usr/local/sbin/pkg - found

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: fetch-depends
-------------------------------------------------------------------------------


SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: fetch
-------------------------------------------------------------------------------

===>   semaphore-2.5.1_1 depends on file: /usr/local/sbin/pkg - found
===> Fetching all distfiles required by semaphore-2.5.1_1 for building

SUCCEEDED 00:00:02

-------------------------------------------------------------------------------
-- Phase: checksum
-------------------------------------------------------------------------------

===>   semaphore-2.5.1_1 depends on file: /usr/local/sbin/pkg - found
===> Fetching all distfiles required by semaphore-2.5.1_1 for building
=> SHA256 Checksum OK for ansible-semaphore-semaphore-v2.5.1_GH0.tar.gz.
=> SHA256 Checksum OK for ansible-semaphore-semaphore-vendor-a44f7be_GH0.tar.gz.
=> SHA256 Checksum OK for PuerkitoBio-purell-v1.1.0_GH0.tar.gz.
=> SHA256 Checksum OK for PuerkitoBio-urlesc-de5bf2a_GH0.tar.gz.
=> SHA256 Checksum OK for Sirupsen-logrus-v1.0.4_GH0.tar.gz.
=> SHA256 Checksum OK for asaskevich-govalidator-v9_GH0.tar.gz.
=> SHA256 Checksum OK for castawaylabs-mulekick-7029fb3_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-analysis-f59a71f_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-errors-7bcb96a_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-jsonpointer-3a0015a_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-jsonreference-3fb327e_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-loads-2a2b323_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-runtime-62281b6_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-spec-370d9e0_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-strfmt-4818084_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-swag-811b108_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-validate-180bba5_GH0.tar.gz.
=> SHA256 Checksum OK for go-sql-driver-mysql-v1.3_GH0.tar.gz.
=> SHA256 Checksum OK for gobuffalo-packr-v1.10.4_GH0.tar.gz.
=> SHA256 Checksum OK for google-go-github-v15.0.0_GH0.tar.gz.
=> SHA256 Checksum OK for google-go-querystring-53e6ce1_GH0.tar.gz.
=> SHA256 Checksum OK for gorilla-context-v1.1_GH0.tar.gz.
=> SHA256 Checksum OK for gorilla-handlers-v1.3.0_GH0.tar.gz.
=> SHA256 Checksum OK for gorilla-mux-v1.6.1_GH0.tar.gz.
=> SHA256 Checksum OK for gorilla-securecookie-v1.1.1_GH0.tar.gz.
=> SHA256 Checksum OK for gorilla-websocket-v1.2.0_GH0.tar.gz.
=> SHA256 Checksum OK for lann-builder-1b87b36_GH0.tar.gz.
=> SHA256 Checksum OK for lann-ps-62de8c4_GH0.tar.gz.
=> SHA256 Checksum OK for mailru-easyjson-8b799c4_GH0.tar.gz.
=> SHA256 Checksum OK for masterminds-squirrel-v1.0_GH0.tar.gz.
=> SHA256 Checksum OK for mitchellh-mapstructure-00c29f5_GH0.tar.gz.
=> SHA256 Checksum OK for pkg-errors-v0.8.0_GH0.tar.gz.
=> SHA256 Checksum OK for russross-blackfriday-v1.5.1_GH0.tar.gz.
=> SHA256 Checksum OK for golang-net-61147c4_GH0.tar.gz.
=> SHA256 Checksum OK for golang-sys-226ff32_GH0.tar.gz.
=> SHA256 Checksum OK for golang-text-v0.3.0_GH0.tar.gz.
=> SHA256 Checksum OK for golang-crypto-c7dcf10_GH0.tar.gz.
=> SHA256 Checksum OK for go-asn1-ber-asn1-ber-v1.2_GH0.tar.gz.
=> SHA256 Checksum OK for go-gorp-gorp-v1.7.1_GH0.tar.gz.
=> SHA256 Checksum OK for go-ldap-ldap-v2.5.1_GH0.tar.gz.
=> SHA256 Checksum OK for go-mgo-mgo-3f83fa5_GH0.tar.gz.
=> SHA256 Checksum OK for go-yaml-yaml-v2.2.1_GH0.tar.gz.

SUCCEEDED 00:00:02

-------------------------------------------------------------------------------
-- Phase: extract-depends
-------------------------------------------------------------------------------


SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: extract
-------------------------------------------------------------------------------

===>   semaphore-2.5.1_1 depends on file: /usr/local/sbin/pkg - found
===> Fetching all distfiles required by semaphore-2.5.1_1 for building
===>  Extracting for semaphore-2.5.1_1
=> SHA256 Checksum OK for ansible-semaphore-semaphore-v2.5.1_GH0.tar.gz.
=> SHA256 Checksum OK for ansible-semaphore-semaphore-vendor-a44f7be_GH0.tar.gz.
=> SHA256 Checksum OK for PuerkitoBio-purell-v1.1.0_GH0.tar.gz.
=> SHA256 Checksum OK for PuerkitoBio-urlesc-de5bf2a_GH0.tar.gz.
=> SHA256 Checksum OK for Sirupsen-logrus-v1.0.4_GH0.tar.gz.
=> SHA256 Checksum OK for asaskevich-govalidator-v9_GH0.tar.gz.
=> SHA256 Checksum OK for castawaylabs-mulekick-7029fb3_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-analysis-f59a71f_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-errors-7bcb96a_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-jsonpointer-3a0015a_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-jsonreference-3fb327e_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-loads-2a2b323_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-runtime-62281b6_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-spec-370d9e0_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-strfmt-4818084_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-swag-811b108_GH0.tar.gz.
=> SHA256 Checksum OK for go-openapi-validate-180bba5_GH0.tar.gz.
=> SHA256 Checksum OK for go-sql-driver-mysql-v1.3_GH0.tar.gz.
=> SHA256 Checksum OK for gobuffalo-packr-v1.10.4_GH0.tar.gz.
=> SHA256 Checksum OK for google-go-github-v15.0.0_GH0.tar.gz.
=> SHA256 Checksum OK for google-go-querystring-53e6ce1_GH0.tar.gz.
=> SHA256 Checksum OK for gorilla-context-v1.1_GH0.tar.gz.
=> SHA256 Checksum OK for gorilla-handlers-v1.3.0_GH0.tar.gz.
=> SHA256 Checksum OK for gorilla-mux-v1.6.1_GH0.tar.gz.
=> SHA256 Checksum OK for gorilla-securecookie-v1.1.1_GH0.tar.gz.
=> SHA256 Checksum OK for gorilla-websocket-v1.2.0_GH0.tar.gz.
=> SHA256 Checksum OK for lann-builder-1b87b36_GH0.tar.gz.
=> SHA256 Checksum OK for lann-ps-62de8c4_GH0.tar.gz.
=> SHA256 Checksum OK for mailru-easyjson-8b799c4_GH0.tar.gz.
=> SHA256 Checksum OK for masterminds-squirrel-v1.0_GH0.tar.gz.
=> SHA256 Checksum OK for mitchellh-mapstructure-00c29f5_GH0.tar.gz.
=> SHA256 Checksum OK for pkg-errors-v0.8.0_GH0.tar.gz.
=> SHA256 Checksum OK for russross-blackfriday-v1.5.1_GH0.tar.gz.
=> SHA256 Checksum OK for golang-net-61147c4_GH0.tar.gz.
=> SHA256 Checksum OK for golang-sys-226ff32_GH0.tar.gz.
=> SHA256 Checksum OK for golang-text-v0.3.0_GH0.tar.gz.
=> SHA256 Checksum OK for golang-crypto-c7dcf10_GH0.tar.gz.
=> SHA256 Checksum OK for go-asn1-ber-asn1-ber-v1.2_GH0.tar.gz.
=> SHA256 Checksum OK for go-gorp-gorp-v1.7.1_GH0.tar.gz.
=> SHA256 Checksum OK for go-ldap-ldap-v2.5.1_GH0.tar.gz.
=> SHA256 Checksum OK for go-mgo-mgo-3f83fa5_GH0.tar.gz.
=> SHA256 Checksum OK for go-yaml-yaml-v2.2.1_GH0.tar.gz.

Extracted Memory Use:  64.36M
SUCCEEDED 00:00:05

-------------------------------------------------------------------------------
-- Phase: patch-depends
-------------------------------------------------------------------------------


SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: patch
-------------------------------------------------------------------------------

===>  Patching for semaphore-2.5.1_1
===>  Applying ports patches for semaphore-2.5.1_1 from /xports/net-mgmt/semaphore/files
/usr/bin/env WRKSRC=/construction/net-mgmt/semaphore/semaphore-2.5.1 REWARNFILE=/construction/net-mgmt/semaphore/reinplace_warnings.txt /xports/Mk/Scripts/sed_checked.sh 's/%%PORTVERSION%%/2.5.1/g'  /construction/net-mgmt/semaphore/semaphore-2.5.1/util/config.go

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: build-depends
-------------------------------------------------------------------------------

===>   semaphore-2.5.1_1 depends on file: /usr/local/bin/go - found

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: lib-depends
-------------------------------------------------------------------------------


SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: configure
-------------------------------------------------------------------------------

===>   semaphore-2.5.1_1 depends on file: /usr/local/bin/go - found
===>  Configuring for semaphore-2.5.1_1

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: build
-------------------------------------------------------------------------------

===>  Building for semaphore-2.5.1_1
(cd /construction/net-mgmt/semaphore/src/github.com/ansible-semaphore/semaphore;  for t in ./cli:semaphore; do  out=$(/usr/bin/basename $(echo ${t} |  /usr/bin/sed -Ee 's/^[^:]*:([^:]+).*$/\1/' -e 's/^\.$/semaphore/'));  pkg=$(echo ${t} |  /usr/bin/sed -Ee 's/^([^:]*).*$/\1/' -e 's/^semaphore$/./');  echo "===>  Building ${out} from ${pkg}";  /usr/bin/env XDG_DATA_HOME=/construction/net-mgmt/semaphore  XDG_CONFIG_HOME=/construction/net-mgmt/semaphore  HOME=/construction/net-mgmt/semaphore TMPDIR="/tmp" PATH=/construction/net-mgmt/semaphore/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES CCVER=gcc80 PREFIX=/usr/local  LOCALBASE=/usr/local  NOPROFILE=1  CC="cc" CFLAGS="-pipe -O2 -fno-strict-aliasing "  CPP="cpp" CPPFLAGS=""  LDFLAGS=" " LIBS=""  CXX="c++" CXXFLAGS=" -pipe -O2 -fno-strict-aliasing "  MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install  -s -m 555"  BSD_INSTALL_LIB="install  -s -m 0644"  BSD_INSTALL_SCRIPT="install  -m 555"  BSD_INSTALL_DATA="install  -m 0644"  BSD_INSTALL_MAN="install  -m 444" CGO_ENABLED=1  CGO_CFLAGS="-I/usr/local/include"  CGO_LDFLAGS="-L/usr/local/lib"  GOARM= GOPATH="/construction/net-mgmt/semaphore"  GOBIN="" /usr/local/bin/go build -v -buildmode=exe -ldflags=-s  -o /construction/net-mgmt/semaphore/bin/${out}  ${pkg};  done)
===>  Building semaphore from ./cli
github.com/ansible-semaphore/semaphore/vendor/golang.org/x/sys/internal/unsafeheader
runtime/cgo
github.com/ansible-semaphore/semaphore/vendor/golang.org/x/crypto/blowfish
github.com/ansible-semaphore/semaphore/vendor/golang.org/x/sys/unix
github.com/ansible-semaphore/semaphore/vendor/github.com/google/go-querystring/query
github.com/ansible-semaphore/semaphore/vendor/github.com/pkg/errors
github.com/ansible-semaphore/semaphore/vendor/gopkg.in/asn1-ber.v1
github.com/ansible-semaphore/semaphore/vendor/gopkg.in/gorp.v1
github.com/ansible-semaphore/semaphore/vendor/github.com/russross/blackfriday
github.com/ansible-semaphore/semaphore/vendor/golang.org/x/crypto/bcrypt
github.com/ansible-semaphore/semaphore/vendor/github.com/gorilla/securecookie
github.com/ansible-semaphore/semaphore/vendor/github.com/lann/ps
github.com/ansible-semaphore/semaphore/vendor/github.com/lann/builder
github.com/ansible-semaphore/semaphore/vendor/github.com/masterminds/squirrel
github.com/ansible-semaphore/semaphore/vendor/golang.org/x/crypto/ssh/terminal
github.com/ansible-semaphore/semaphore/vendor/github.com/Sirupsen/logrus
net
vendor/golang.org/x/net/http/httpproxy
net/textproto
crypto/x509
vendor/golang.org/x/net/http/httpguts
crypto/tls
net/http/httptrace
net/smtp
github.com/ansible-semaphore/semaphore/vendor/github.com/go-sql-driver/mysql
github.com/ansible-semaphore/semaphore/vendor/gopkg.in/ldap.v2
net/http
github.com/ansible-semaphore/semaphore/vendor/github.com/gorilla/context
github.com/ansible-semaphore/semaphore/vendor/github.com/gorilla/handlers
github.com/ansible-semaphore/semaphore/vendor/github.com/gorilla/mux
github.com/ansible-semaphore/semaphore/vendor/github.com/gobuffalo/packr
github.com/ansible-semaphore/semaphore/vendor/github.com/gorilla/websocket
github.com/ansible-semaphore/semaphore/vendor/github.com/google/go-github/github
github.com/ansible-semaphore/semaphore/vendor/github.com/castawaylabs/mulekick
github.com/ansible-semaphore/semaphore/util
github.com/ansible-semaphore/semaphore/db
github.com/ansible-semaphore/semaphore/api/sockets
github.com/ansible-semaphore/semaphore/api/projects
github.com/ansible-semaphore/semaphore/api/tasks
github.com/ansible-semaphore/semaphore/api
github.com/ansible-semaphore/semaphore/cli

SUCCEEDED 00:00:20

-------------------------------------------------------------------------------
-- Phase: run-depends
-------------------------------------------------------------------------------

===>   semaphore-2.5.1_1 depends on executable: ansible - found
===>   semaphore-2.5.1_1 depends on executable: git - found

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: stage
-------------------------------------------------------------------------------

===>  Staging for semaphore-2.5.1_1
===>   semaphore-2.5.1_1 depends on executable: ansible - found
===>   semaphore-2.5.1_1 depends on executable: git - found
===>   Generating temporary packing list
for t in ./cli:semaphore; do  dst=$(echo ${t} |  /usr/bin/sed -Ee 's/^[^:]*:([^:]+).*$/\1/' -e 's/^\.$/semaphore/');  src=$(/usr/bin/basename ${dst});  case ${dst} in  /*) dst=/construction/net-mgmt/semaphore/stage${dst}; /bin/mkdir -p $(/usr/bin/dirname ${dst}) ;;  *) dst=/construction/net-mgmt/semaphore/stage/usr/local/bin/${src} ;;  esac;  echo "===>  Installing ${src} as ${dst}";  install  -s -m 555 /construction/net-mgmt/semaphore/bin/${src} ${dst};  done
===>  Installing semaphore as /construction/net-mgmt/semaphore/stage/usr/local/bin/semaphore
/bin/mkdir -p /construction/net-mgmt/semaphore/stage/usr/local/etc/semaphore
/bin/cp /construction/net-mgmt/semaphore/semaphore-2.5.1/config.json /construction/net-mgmt/semaphore/stage/usr/local/etc/semaphore/semaphore_config.json.sample
/bin/mkdir -p /construction/net-mgmt/semaphore/stage/usr/local/share/semaphore
/bin/cp /construction/net-mgmt/semaphore/semaphore-2.5.1/db/migrations/*.sql /construction/net-mgmt/semaphore/stage/usr/local/share/semaphore
====> Compressing man pages (compress-man)
===> Staging rc.d startup script(s)
====> Running Q/A tests (stage-qa)
Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks

SUCCEEDED 00:00:01

-------------------------------------------------------------------------------
-- Phase: check-plist
-------------------------------------------------------------------------------

====> Checking for pkg-plist issues (check-plist)
===> Parsing plist
===> Checking for items in STAGEDIR missing from pkg-plist
===> Checking for items in pkg-plist which are not in STAGEDIR
===> No pkg-plist issues found (check-plist)

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: package
-------------------------------------------------------------------------------

===>  Building package for semaphore-2.5.1_1
file sizes/checksums    [21]:   0%
file sizes/checksums    [21]: 100%
packing files           [21]:   0%
packing files           [21]: 100%
packing directories      [0]:   0%
packing directories      [0]: 100%

SUCCEEDED 00:00:24
TOTAL TIME 00:02:26