------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/pkgconf-1.7.3,1.txz Installing /packages/All/giflib-5.2.1.txz Installing /packages/All/png-1.6.37.txz Installing /packages/All/jbigkit-2.1_1.txz Installing /packages/All/jpeg-turbo-2.0.4.txz Installing /packages/All/tiff-4.1.0.txz Installing /packages/All/freetype2-2.10.2.txz ===== Message from freetype2-2.10.2: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). Installing /packages/All/expat-2.2.8.txz Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gettext-runtime-0.21.txz Installing /packages/All/fontconfig-2.13.92_2,1.txz Running fc-cache to build fontconfig cache... Font directories: /usr/local/share/fonts /usr/local/lib/X11/fonts /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded Installing /packages/All/libICE-1.0.10,1.txz Installing /packages/All/libSM-1.2.3,1.txz Installing /packages/All/libxml2-2.9.10.txz Installing /packages/All/libpthread-stubs-0.4.txz Installing /packages/All/libXau-1.0.9.txz Installing /packages/All/xorgproto-2020.1.txz Installing /packages/All/libXdmcp-1.1.3.txz Installing /packages/All/libxcb-1.13.1.txz Installing /packages/All/libX11-1.6.12,1.txz Installing /packages/All/dbus-1.12.20.txz ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. Installing /packages/All/libogg-1.3.4,4.txz Installing /packages/All/flac-1.3.3.txz Installing /packages/All/opus-1.3.1.txz Installing /packages/All/libvorbis-1.3.7_2,3.txz Installing /packages/All/libsndfile-1.0.29.p.20200620.txz Installing /packages/All/fribidi-0.19.7.txz Installing /packages/All/graphite2-1.3.14.txz Installing /packages/All/pcre-8.44.txz Installing /packages/All/libffi-3.3_1.txz Installing /packages/All/libiconv-1.16.txz Installing /packages/All/ncurses-6.2.20200831.txz Installing /packages/All/readline-8.0.4.txz Installing /packages/All/openssl-1.1.1g,1.txz Installing /packages/All/python37-3.7.9.txz ===== Message from python37-3.7.9: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py37-gdbm databases/py-gdbm@py37 py37-sqlite3 databases/py-sqlite3@py37 py37-tkinter x11-toolkits/py-tkinter@py37 Installing /packages/All/glib-2.56.3_9,1.txz No schema files found: doing nothing. Installing /packages/All/harfbuzz-2.7.2.txz Installing /packages/All/nspr-4.28.txz Installing /packages/All/lcms2-2.11_1.txz Installing /packages/All/libedit-3.1.20191231,1.txz Installing /packages/All/sqlite3-3.33.0,1.txz Installing /packages/All/nss-3.56.txz Installing /packages/All/openjpeg-2.3.1.txz Installing /packages/All/pixman-0.40.0_1.txz Installing /packages/All/libXext-1.3.4,1.txz Installing /packages/All/libXrender-0.9.10_2.txz Installing /packages/All/cairo-1.16.0,2.txz Installing /packages/All/poppler-data-0.4.9_5.txz Installing /packages/All/poppler-20.08.0_1.txz Installing /packages/All/wayland-1.18.0.txz Installing /packages/All/pciids-20200819.txz Installing /packages/All/libpciaccess-0.16.txz Installing /packages/All/libdrm-2.4.101.txz Installing /packages/All/libXfixes-5.0.3_2.txz Installing /packages/All/libXdamage-1.1.5.txz Installing /packages/All/libxshmfence-1.3.txz Installing /packages/All/libXxf86vm-1.1.4_3.txz Installing /packages/All/libXrandr-1.5.2.txz Installing /packages/All/mesa-libs-19.0.8_2.txz Installing /packages/All/libGLU-9.0.1.txz Installing /packages/All/libXi-1.7.10,1.txz Installing /packages/All/freeglut-3.0.0_2.txz ===== Message from freeglut-3.0.0_2: -- Joystick support is untested and it is unknown if it works. Do not hesitate to contact x11@FreeBSD.org if this causes issues. Installing /packages/All/bullet-2.86.1_4.txz Installing /packages/All/libunwind-20200331_1.txz Installing /packages/All/luajit-2.0.5_4.txz Installing /packages/All/atk-2.36.0.txz Installing /packages/All/shared-mime-info-2.0.txz Installing /packages/All/gdk-pixbuf2-2.40.0.txz Installing /packages/All/libgsf-1.14.47_1.txz Installing /packages/All/libcroco-0.6.13.txz Installing /packages/All/libfontenc-1.1.4.txz Installing /packages/All/mkfontscale-1.2.1.txz Installing /packages/All/font-bh-ttf-1.0.3_4.txz Installing /packages/All/font-misc-meltho-1.0.3_4.txz Installing /packages/All/font-misc-ethiopic-1.0.4.txz Installing /packages/All/encodings-1.0.5,1.txz Installing /packages/All/dejavu-2.37_1.txz ===== Message from dejavu-2.37_1: -- Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Installing /packages/All/xorg-fonts-truetype-7.7_1.txz Installing /packages/All/libXft-2.3.3.txz Installing /packages/All/pango-1.42.4_4.txz Installing /packages/All/librsvg2-2.40.21.txz Installing /packages/All/gstreamer1-1.16.2.txz Installing /packages/All/gtk-update-icon-cache-3.24.20.txz Installing /packages/All/python27-2.7.18_1.txz ===== Message from python27-2.7.18_1: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter Installing /packages/All/orc-0.4.31.txz Installing /packages/All/aom-2.0.0_1.txz Installing /packages/All/libass-0.14.0.txz Installing /packages/All/dav1d-0.7.1.txz Installing /packages/All/gmp-6.2.0.txz Installing /packages/All/nettle-3.6.txz Installing /packages/All/libtasn1-4.16.0.txz Installing /packages/All/libunistring-0.9.10_1.txz Installing /packages/All/libidn2-2.3.0_1.txz Installing /packages/All/ca_root_nss-3.56.txz ===== Message from ca_root_nss-3.56: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/bash-5.0.18_3.txz Installing /packages/All/bash-completion-2.11,2.txz ===== Message from bash-completion-2.11,2: -- To enable the bash completion library, add the following to your .bashrc file: [[ $PS1 && -f /usr/local/share/bash-completion/bash_completion.sh ]] && \ source /usr/local/share/bash-completion/bash_completion.sh See /usr/local/share/doc/bash-completion/README.md for more information. Installing /packages/All/p11-kit-0.23.21.txz Installing /packages/All/tpm-emulator-0.7.4_2.txz ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. Installing /packages/All/trousers-0.3.14_3.txz ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. ===== Message from trousers-0.3.14_3: -- To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Installing /packages/All/gnutls-3.6.15.txz Installing /packages/All/opencv-core-3.4.1_36.txz ===== Message from opencv-core-3.4.1_36: -- ===> NOTICE: The opencv-core port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/libtheora-1.1.1_7.txz Installing /packages/All/argp-standalone-1.3_4.txz ===== Message from argp-standalone-1.3_4: -- ===> NOTICE: The argp-standalone port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/libudev-devd-0.4.2.txz Installing /packages/All/libv4l-1.18.0.txz Installing /packages/All/libva-2.8.0.txz Installing /packages/All/libvdpau-1.4.txz Installing /packages/All/libvpx-1.9.0.txz Installing /packages/All/libx264-0.160.3011.txz Installing /packages/All/x265-3.2.1_4.txz Installing /packages/All/xvid-1.3.7,1.txz Installing /packages/All/ffmpeg-4.3.1_1,1.txz Installing /packages/All/iso-codes-4.2.txz Installing /packages/All/gstreamer1-plugins-1.16.2.txz Installing /packages/All/gstreamer1-libav-1.16.2.txz Installing /packages/All/liba52-0.7.4_3.txz Installing /packages/All/gstreamer1-plugins-ugly-1.16.2.txz Installing /packages/All/gstreamer1-plugins-a52dec-1.16.2.txz Installing /packages/All/gstreamer1-plugins-bad-1.16.2.txz Installing /packages/All/libdca-0.0.6_1.txz ===== Message from libdca-0.0.6_1: -- ===> NOTICE: The libdca port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/gstreamer1-plugins-dts-1.16.2.txz Installing /packages/All/libdvdread-6.1.0.txz Installing /packages/All/gstreamer1-plugins-dvdread-1.16.2_1.txz Installing /packages/All/gstreamer1-plugins-good-1.16.2.txz Installing /packages/All/mpg123-1.26.3.txz Installing /packages/All/gstreamer1-plugins-mpg123-1.16.2.txz Installing /packages/All/gstreamer1-plugins-ogg-1.16.2.txz Installing /packages/All/gstreamer1-plugins-pango-1.16.2.txz Installing /packages/All/gstreamer1-plugins-png-1.16.2.txz Installing /packages/All/libdvdnav-6.1.0.txz Installing /packages/All/gstreamer1-plugins-resindvd-1.16.2_1.txz Installing /packages/All/gstreamer1-plugins-theora-1.16.2.txz Installing /packages/All/gstreamer1-plugins-vorbis-1.16.2.txz Installing /packages/All/gstreamer1-plugins-core-1.16.txz Installing /packages/All/libXcursor-1.2.0.txz Installing /packages/All/libXcomposite-0.4.5,1.txz Installing /packages/All/libXinerama-1.1.4_2,1.txz Installing /packages/All/libXtst-1.2.3_2.txz Installing /packages/All/libXScrnSaver-1.2.3_2.txz Installing /packages/All/efl-1.20.7_27.txz ===== Message from efl-1.20.7_27: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. SUCCEEDED 00:01:16 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> edje_viewer-20130520_5 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> edje_viewer-20130520_5 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by edje_viewer-20130520_5 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> edje_viewer-20130520_5 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by edje_viewer-20130520_5 for building => SHA256 Checksum OK for e17/edje_viewer-20130520.tar.bz2. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> edje_viewer-20130520_5 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by edje_viewer-20130520_5 for building ===> Extracting for edje_viewer-20130520_5 => SHA256 Checksum OK for e17/edje_viewer-20130520.tar.bz2. Extracted Memory Use: 1.39M SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for edje_viewer-20130520_5 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> edje_viewer-20130520_5 depends on package: pkgconf>=1.3.0_1 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- ===> edje_viewer-20130520_5 depends on shared library: libefl.so - found (/usr/local/lib/libefl.so) SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> edje_viewer-20130520_5 depends on package: pkgconf>=1.3.0_1 - found ===> edje_viewer-20130520_5 depends on shared library: libefl.so - found (/usr/local/lib/libefl.so) ===> Configuring for edje_viewer-20130520_5 configure: loading site script /xports/Templates/config.site checking build system type... x86_64-portbld-dragonfly5.9 checking host system type... x86_64-portbld-dragonfly5.9 checking target system type... x86_64-portbld-dragonfly5.9 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for style of include used by make... GNU checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking dependency style of cc... gcc3 checking for library containing strerror... none required checking for gcc... (cached) cc checking whether we are using the GNU C compiler... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to accept ISO C89... (cached) none needed checking dependency style of cc... (cached) gcc3 checking how to run the C preprocessor... cpp checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ANSI C header files... (cached) yes checking for an ANSI C-conforming const... yes checking for __attribute__... yes checking pkg-config is at least version 0.9.0... yes checking for EDJE_VIEWER... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating src/bin/Makefile config.status: creating data/Makefile config.status: creating data/images/Makefile config.status: creating config.h config.status: executing depfiles commands SUCCEEDED 00:00:03 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for edje_viewer-20130520_5 --- all --- /usr/bin/make all-recursive --- all-recursive --- Making all in data --- all-recursive --- Making all in images --- edje_viewer.edj --- edje_cc -id ../data/images ../data/edje_viewer.edc ../data/edje_viewer.edj ERR<809454>:ecore_con lib/ecore_con/ecore_con_url_curl.c:288 _c_init() Could not find libcurl.so.5, libcurl.so.4 ## Copy & Paste the below (until EOF) into a terminal, then hit Enter eina_btlog << EOF EOF ERR<809494>:eldbus lib/eldbus/eldbus_core.c:1050 _connection_get() Error connecting to bus of type 2. error name: org.freedesktop.DBus.Error.FileNotFound error message: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory ## Copy & Paste the below (until EOF) into a terminal, then hit Enter eina_btlog << EOF EOF ERR<809494>:eina_safety lib/eldbus/eldbus_core.c:1113 eldbus_connection_get() safety check failed: conn == NULL ## Copy & Paste the below (until EOF) into a terminal, then hit Enter eina_btlog << EOF EOF ERR<809494>:eina_safety lib/eldbus/eldbus_object.c:192 eldbus_object_get() safety check failed: conn == NULL ## Copy & Paste the below (until EOF) into a terminal, then hit Enter eina_btlog << EOF EOF ERR<809494>:ecore_system_upower modules/ecore/system/upower/ecore_system_upower.c:443 _ecore_system_upower_init() could not get object name=org.freedesktop.UPower, path=/org/freedesktop/UPower ## Copy & Paste the below (until EOF) into a terminal, then hit Enter eina_btlog << EOF EOF ERR<809494>:eina_safety lib/eldbus/eldbus_core.c:1424 eldbus_name_owner_changed_callback_del() safety check failed: conn == NULL ## Copy & Paste the below (until EOF) into a terminal, then hit Enter eina_btlog << EOF EOF ERR<809494>:ecore_con lib/ecore_con/ecore_con_url_curl.c:288 _c_init() Could not find libcurl.so.5, libcurl.so.4 ## Copy & Paste the below (until EOF) into a terminal, then hit Enter eina_btlog << EOF EOF ERR<809635>:eldbus lib/eldbus/eldbus_core.c:1050 _connection_get() Error connecting to bus of type 2. error name: org.freedesktop.DBus.Error.FileNotFound error message: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory ## Copy & Paste the below (until EOF) into a terminal, then hit Enter eina_btlog << EOF EOF ERR<809635>:eina_safety lib/eldbus/eldbus_core.c:1113 eldbus_connection_get() safety check failed: conn == NULL ## Copy & Paste the below (until EOF) into a terminal, then hit Enter eina_btlog << EOF EOF ERR<809635>:eina_safety lib/eldbus/eldbus_object.c:192 eldbus_object_get() safety check failed: conn == NULL ## Copy & Paste the below (until EOF) into a terminal, then hit Enter eina_btlog << EOF EOF ERR<809635>:ecore_system_upower modules/ecore/system/upower/ecore_system_upower.c:443 _ecore_system_upower_init() could not get object name=org.freedesktop.UPower, path=/org/freedesktop/UPower ## Copy & Paste the below (until EOF) into a terminal, then hit Enter eina_btlog << EOF EOF ERR<809635>:eina_safety lib/eldbus/eldbus_core.c:1424 eldbus_name_owner_changed_callback_del() safety check failed: conn == NULL ## Copy & Paste the below (until EOF) into a terminal, then hit Enter eina_btlog << EOF EOF ERR<809635>:ecore_con lib/ecore_con/ecore_con_url_curl.c:288 _c_init() Could not find libcurl.so.5, libcurl.so.4 ## Copy & Paste the below (until EOF) into a terminal, then hit Enter eina_btlog << EOF EOF Making all in src --- all-recursive --- Making all in bin --- edje_viewer_gui.o --- --- edje_viewer_main.o --- --- edje_viewer_gui.o --- cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -DPACKAGE_DATA_DIR=\"/usr/local/share/edje_viewer\" -I/usr/local/include/efl-1 -I/usr/local/include/eina-1 -I/usr/local/include/eina-1/eina -I/usr/local/include/eet-1 -I/usr/local/include/emile-1 -I/usr/local/include/eo-1 -I/usr/local/include/evas-1 -I/usr/local/include/evas-1/canvas -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/freetype2 -I/usr/local/include -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include/fribidi -I/usr/local/include/ecore-1 -I/usr/local/include/luajit-2.0 -I/usr/local/include/ecore-file-1 -I/usr/local/include/ecore-con-1 -I/usr/local/include/edje-1 -I/usr/local/include/ecore-audio-1 -I/usr/local/include/eio-1 -I/usr/local/include/efreet-1 -I/usr/local/include/ecore-ipc-1 -I/usr/local/include/embryo-1 -I/usr/local/include/ecore-imf-evas-1 -I/usr/local/include/ecore-imf-1 -I/usr/local/include/ecore-input-1 -I/usr/local/include/ecore-evas-1 -I/usr/local/include/ecore-input-evas-1 -I/usr/local/include/elementary-1 -I/usr/local/include/ecore-x-1 -I/usr/local/include/elocation-1 -I/usr/local/include/eldbus-1 -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/usr/local/include/emotion-1 -I/usr/local/include/ethumb-client-1 -I/usr/local/include/ethumb-1 -pipe -O2 -fno-strict-aliasing -MT edje_viewer_gui.o -MD -MP -MF .deps/edje_viewer_gui.Tpo -c -o edje_viewer_gui.o edje_viewer_gui.c --- edje_viewer_main.o --- cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -DPACKAGE_DATA_DIR=\"/usr/local/share/edje_viewer\" -I/usr/local/include/efl-1 -I/usr/local/include/eina-1 -I/usr/local/include/eina-1/eina -I/usr/local/include/eet-1 -I/usr/local/include/emile-1 -I/usr/local/include/eo-1 -I/usr/local/include/evas-1 -I/usr/local/include/evas-1/canvas -I/usr/local/include/libpng16 -I/usr/local/include/harfbuzz -I/usr/local/include/freetype2 -I/usr/local/include -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include/fribidi -I/usr/local/include/ecore-1 -I/usr/local/include/luajit-2.0 -I/usr/local/include/ecore-file-1 -I/usr/local/include/ecore-con-1 -I/usr/local/include/edje-1 -I/usr/local/include/ecore-audio-1 -I/usr/local/include/eio-1 -I/usr/local/include/efreet-1 -I/usr/local/include/ecore-ipc-1 -I/usr/local/include/embryo-1 -I/usr/local/include/ecore-imf-evas-1 -I/usr/local/include/ecore-imf-1 -I/usr/local/include/ecore-input-1 -I/usr/local/include/ecore-evas-1 -I/usr/local/include/ecore-input-evas-1 -I/usr/local/include/elementary-1 -I/usr/local/include/ecore-x-1 -I/usr/local/include/elocation-1 -I/usr/local/include/eldbus-1 -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/usr/local/include/emotion-1 -I/usr/local/include/ethumb-client-1 -I/usr/local/include/ethumb-1 -pipe -O2 -fno-strict-aliasing -MT edje_viewer_main.o -MD -MP -MF .deps/edje_viewer_main.Tpo -c -o edje_viewer_main.o edje_viewer_main.c In file included from /usr/local/include/eina-1/Eina.h:226, from edje_viewer_main.h:13, from edje_viewer_main.c:1: /usr/local/include/eina-1/eina/eina_module.h:232:2: warning: ignoring attribute 'malloc' because it conflicts with attribute 'pure' [-Wattributes] eina_module_symbol_path_get(const void *symbol, const char *sub_dir) EINA_PURE EINA_MALLOC EINA_ARG_NONNULL(1, 2); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/local/include/eina-1/eina/eina_module.h:249:2: warning: ignoring attribute 'malloc' because it conflicts with attribute 'pure' [-Wattributes] eina_module_environment_path_get(const char *env, const char *sub_dir) EINA_PURE EINA_MALLOC EINA_ARG_NONNULL(1, 2); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- edje_viewer_gui.o --- In file included from /usr/local/include/eina-1/Eina.h:226, from ./edje_viewer_main.h:13, from edje_viewer_gui.c:1: /usr/local/include/eina-1/eina/eina_module.h:232:2: warning: ignoring attribute 'malloc' because it conflicts with attribute 'pure' [-Wattributes] eina_module_symbol_path_get(const void *symbol, const char *sub_dir) EINA_PURE EINA_MALLOC EINA_ARG_NONNULL(1, 2); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/local/include/eina-1/eina/eina_module.h:249:2: warning: ignoring attribute 'malloc' because it conflicts with attribute 'pure' [-Wattributes] eina_module_environment_path_get(const char *env, const char *sub_dir) EINA_PURE EINA_MALLOC EINA_ARG_NONNULL(1, 2); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- edje_viewer_main.o --- mv -f .deps/edje_viewer_main.Tpo .deps/edje_viewer_main.Po --- edje_viewer_gui.o --- mv -f .deps/edje_viewer_gui.Tpo .deps/edje_viewer_gui.Po --- edje_viewer --- cc -pipe -O2 -fno-strict-aliasing -o edje_viewer edje_viewer_gui.o edje_viewer_main.o -L/usr/local/lib -lelementary -lefl -leina -leet -levas -lecore -lecore_evas -lecore_file -lecore_input -ledje -leo -lethumb_client -lemotion -lecore_imf -lecore_con -leldbus -lefreet -lefreet_mime -lefreet_trash -leio -lpthread -lm SUCCEEDED 00:00:03 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for edje_viewer-20130520_5 ===> Generating temporary packing list Making install in data Making install in images /bin/mkdir -p '/construction/graphics/edje_viewer/stage/usr/local/share/applications' install -m 0644 edje_viewer.desktop '/construction/graphics/edje_viewer/stage/usr/local/share/applications' /bin/mkdir -p '/construction/graphics/edje_viewer/stage/usr/local/share/edje_viewer' install -m 0644 edje_viewer.edj '/construction/graphics/edje_viewer/stage/usr/local/share/edje_viewer' Making install in src Making install in bin /bin/mkdir -p '/construction/graphics/edje_viewer/stage/usr/local/bin' install -s -m 555 edje_viewer '/construction/graphics/edje_viewer/stage/usr/local/bin' ====> Compressing man pages (compress-man) ====> Running Q/A tests (stage-qa) Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks SUCCEEDED 00:00:02 ------------------------------------------------------------------------------- -- Phase: check-plist ------------------------------------------------------------------------------- ====> Checking for pkg-plist issues (check-plist) ===> Parsing plist ===> Checking for items in STAGEDIR missing from pkg-plist ===> Checking for items in pkg-plist which are not in STAGEDIR ===> No pkg-plist issues found (check-plist) SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for edje_viewer-20130520_5 file sizes/checksums [3]: 0% file sizes/checksums [3]: 100% packing files [3]: 0% packing files [3]: 100% packing directories [0]: 0% packing directories [0]: 100% SUCCEEDED 00:00:00 TOTAL TIME 00:01:26