-------------------------------------------------------------------------------
-- Phase: setup
-------------------------------------------------------------------------------

Installing /packages/All/freetype2-2.10.1.txz
=====
Message from freetype2-2.10.1:

--
The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as
the default, emulating a modern version of ClearType. This change inevitably
leads to different rendering results, and you might change port's options to
adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment
variable).

The environment variable "FREETYPE_PROPERTIES" can be used to control the
driver properties. Example:

FREETYPE_PROPERTIES=truetype:interpreter-version=35 \
	cff:no-stem-darkening=1 \
	autofitter:warping=1

This allows to select, say, the subpixel hinting mode at runtime for a given
application.

If LONG_PCF_NAMES port's option was enabled, the PCF family names may include
the foundry and information whether they contain wide characters. For example,
"Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at
run time with using pcf:no-long-family-names property, if needed. Example:

FREETYPE_PROPERTIES=pcf:no-long-family-names=1

How to recreate fontconfig cache with using such environment variable,
if needed:
# env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv

The controllable properties are listed in the section "Controlling FreeType
Modules" in the reference's table of contents
(/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed).
Installing /packages/All/expat-2.2.8.txz
Installing /packages/All/indexinfo-0.3.1.txz
Installing /packages/All/gettext-runtime-0.20.2.txz
Installing /packages/All/fontconfig-2.13.92_2,1.txz
Running fc-cache to build fontconfig cache...
Font directories:
	/usr/local/share/fonts
	/usr/local/lib/X11/fonts
/usr/local/share/fonts: skipping, no such directory
/usr/local/lib/X11/fonts: skipping, no such directory
/var/db/fontconfig: cleaning cache directory
fc-cache: succeeded
Installing /packages/All/libfontenc-1.1.4.txz
Installing /packages/All/mkfontscale-1.2.1.txz
Installing /packages/All/dejavu-2.37_1.txz
=====
Message from dejavu-2.37_1:

--
Make sure that the freetype module is loaded.  If it is not, add the following
line to the "Modules" section of your X Windows configuration file:

	Load "freetype"

Add the following line to the "Files" section of X Windows configuration file:

	FontPath "/usr/local/share/fonts/dejavu/"

Note: your X Windows configuration file is typically /etc/X11/XF86Config
if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org.
Installing /packages/All/libICE-1.0.10,1.txz
Installing /packages/All/libSM-1.2.3,1.txz
Installing /packages/All/libXau-1.0.9.txz
Installing /packages/All/libxml2-2.9.10.txz
Installing /packages/All/libpthread-stubs-0.4.txz
Installing /packages/All/xorgproto-2020.1.txz
Installing /packages/All/libXdmcp-1.1.3.txz
Installing /packages/All/libxcb-1.13.1.txz
Installing /packages/All/libX11-1.6.9_1,1.txz
Installing /packages/All/dbus-1.12.16.txz
===> Creating groups.
Creating group 'messagebus' with gid '556'.
===> Creating users
Creating user 'messagebus' with uid '556'.
Installing /packages/All/pcre-8.43_2.txz
Installing /packages/All/libffi-3.2.1_3.txz
Installing /packages/All/libiconv-1.14_11.txz
Installing /packages/All/ncurses-6.1.20190525.txz
Installing /packages/All/readline-8.0.4.txz
Installing /packages/All/openssl-1.1.1g,1.txz
Installing /packages/All/python37-3.7.7.txz
=====
Message from python37-3.7.7:

--
Note that some standard Python modules are provided as separate ports
as they require additional dependencies. They are available as:

py37-gdbm       databases/py-gdbm@py37
py37-sqlite3    databases/py-sqlite3@py37
py37-tkinter    x11-toolkits/py-tkinter@py37
Installing /packages/All/glib-2.56.3_7,1.txz
No schema files found: doing nothing.
Installing /packages/All/dbus-glib-0.110.txz
Installing /packages/All/policykit-0.9_10.txz
===> Creating groups.
Creating group 'polkit' with gid '562'.
===> Creating users
Creating user 'polkit' with uid '562'.
Installing /packages/All/libvolume_id-0.81.1.txz
Installing /packages/All/nspr-4.25.txz
Installing /packages/All/icu-67.1,1.txz
Installing /packages/All/spidermonkey60-60.9.0_3.txz
=====
Message from spidermonkey60-60.9.0_3:

--
===>   NOTICE:

This port is deprecated; you may wish to reconsider installing it:

Uses Python 2.7 which is EOLed upstream.

It is scheduled to be removed on or after 2020-12-31.
Installing /packages/All/polkit-0.116.txz
===> Creating groups.
Creating group 'polkitd' with gid '565'.
===> Creating users
Creating user 'polkitd' with uid '565'.
Installing /packages/All/libgpg-error-1.37.txz
Installing /packages/All/libgcrypt-1.8.5.txz
Installing /packages/All/libxslt-1.1.34_1.txz
Installing /packages/All/consolekit2-1.2.1_1.txz
Installing /packages/All/pciids-20200421.txz
Installing /packages/All/gnome_subr-1.0.txz
Installing /packages/All/dmidecode-3.2.txz
Installing /packages/All/hal-0.5.14_34.txz
===> Creating groups.
Creating group 'haldaemon' with gid '560'.
===> Creating users
Creating user 'haldaemon' with uid '560'.
Installing /packages/All/hal-info-20091130.txz
Installing /packages/All/mate-backgrounds-1.22.0.txz
Installing /packages/All/atk-2.28.1.txz
Installing /packages/All/png-1.6.37.txz
Installing /packages/All/jbigkit-2.1_1.txz
Installing /packages/All/jpeg-turbo-2.0.4.txz
Installing /packages/All/tiff-4.1.0.txz
Installing /packages/All/shared-mime-info-1.10_2.txz
Installing /packages/All/gdk-pixbuf2-2.40.0.txz
Installing /packages/All/libdaemon-0.14_1.txz
Installing /packages/All/gdbm-1.18.1_1.txz
Installing /packages/All/gobject-introspection-1.56.1,1.txz
Installing /packages/All/avahi-app-0.7_3.txz
===> Creating groups.
Creating group 'avahi' with gid '558'.
===> Creating users
Creating user 'avahi' with uid '558'.
Installing /packages/All/gmp-6.2.0.txz
Installing /packages/All/nettle-3.5.1_1.txz
Installing /packages/All/libtasn1-4.16.0.txz
Installing /packages/All/libunistring-0.9.10_1.txz
Installing /packages/All/libidn2-2.3.0_1.txz
Installing /packages/All/ca_root_nss-3.52.txz
=====
Message from ca_root_nss-3.52:

--
FreeBSD does not, and can not warrant that the certification authorities
whose certificates are included in this package have in any way been
audited for trustworthiness or RFC 3647 compliance.

Assessment and verification of trust is the complete responsibility of the
system administrator.


This package installs symlinks to support root certificates discovery by
default for software that uses OpenSSL.

This enables SSL Certificate Verification by client software without manual
intervention.

If you prefer to do this manually, replace the following symlinks with
either an empty file or your site-local certificate bundle.

  * /etc/ssl/cert.pem
  * /usr/local/etc/ssl/cert.pem
  * /usr/local/openssl/cert.pem
Installing /packages/All/p11-kit-0.23.20.txz
Installing /packages/All/tpm-emulator-0.7.4_2.txz
===> Creating groups.
Creating group '_tss' with gid '601'.
===> Creating users
Creating user '_tss' with uid '601'.
Installing /packages/All/trousers-0.3.14_2.txz
===> Creating groups.
Using existing group '_tss'.
===> Creating users
Using existing user '_tss'.
=====
Message from trousers-0.3.14_2:

--
To run tcsd automatically, add the following line to /etc/rc.conf:

tcsd_enable="YES"

You might want to edit /usr/local/etc/tcsd.conf to reflect your setup.

If you want to use tcsd with software TPM emulator, use the following
configuration in /etc/rc.conf:

tcsd_enable="YES"
tcsd_mode="emulator"
tpmd_enable="YES"

To use TPM, add your_account to '_tss' group like following:

# pw groupmod _tss -m your_account
Installing /packages/All/gnutls-3.6.13.txz
Installing /packages/All/libpaper-1.1.24.4.txz
Installing /packages/All/cups-2.2.13.txz
===> Creating groups.
Creating group 'cups' with gid '193'.
===> Creating users
Creating user 'cups' with uid '193'.
Installing /packages/All/graphite2-1.3.14.txz
Installing /packages/All/harfbuzz-2.6.5.txz
Installing /packages/All/fribidi-0.19.7.txz
Installing /packages/All/wayland-1.16.0.txz
Installing /packages/All/libpciaccess-0.16.txz
Installing /packages/All/libdrm-2.4.101.txz
Installing /packages/All/libelf-0.8.13_3.txz
Installing /packages/All/libXfixes-5.0.3_2.txz
Installing /packages/All/libXdamage-1.1.5.txz
Installing /packages/All/libXext-1.3.4,1.txz
Installing /packages/All/libXrender-0.9.10_2.txz
Installing /packages/All/libXrandr-1.5.2.txz
Installing /packages/All/libxshmfence-1.3.txz
Installing /packages/All/libXxf86vm-1.1.4_3.txz
Installing /packages/All/mesa-libs-19.0.8.txz
=====
Message from mesa-libs-19.0.8:

--
===>   NOTICE:

This port is deprecated; you may wish to reconsider installing it:

Uses Python 2.7 which is EOLed upstream.

It is scheduled to be removed on or after 2020-12-31.
Installing /packages/All/pixman-0.40.0.txz
Installing /packages/All/cairo-1.16.0,2.txz
Installing /packages/All/font-bh-ttf-1.0.3_4.txz
Installing /packages/All/font-misc-meltho-1.0.3_4.txz
Installing /packages/All/font-misc-ethiopic-1.0.3_4.txz
Installing /packages/All/encodings-1.0.5,1.txz
Installing /packages/All/xorg-fonts-truetype-7.7_1.txz
Installing /packages/All/libXft-2.3.3.txz
Installing /packages/All/pango-1.42.4_3.txz
Installing /packages/All/hicolor-icon-theme-0.17.txz
Installing /packages/All/libXinerama-1.1.4_2,1.txz
Installing /packages/All/libXi-1.7.10,1.txz
Installing /packages/All/libXcursor-1.2.0.txz
Installing /packages/All/libXcomposite-0.4.5,1.txz
Installing /packages/All/gtk-update-icon-cache-2.24.32.txz
Installing /packages/All/gtk2-2.24.32.txz
Installing /packages/All/gtk-engines2-2.20.2_3.txz
Installing /packages/All/gtk-murrine-engine-0.98.2_5.txz
Installing /packages/All/mate-themes-3.22.14.txz
Installing /packages/All/perl5-5.30.2.txz
=====
Message from perl5-5.30.2:

--
The /usr/bin/perl symlink has been removed starting with Perl 5.20.
For shebangs, you should either use:

#!/usr/local/bin/perl

or

#!/usr/bin/env perl

The first one will only work if you have a /usr/local/bin/perl,
the second will work as long as perl is in PATH.
Installing /packages/All/hunspell-1.7.0_2.txz
Installing /packages/All/enchant2-2.2.3_4.txz
Installing /packages/All/giflib-5.2.1.txz
Installing /packages/All/webp-1.1.0.txz
Installing /packages/All/libsecret-0.18.6_1.txz
Installing /packages/All/libnotify-0.7.8.txz
Installing /packages/All/hyphen-2.8.8.txz
Installing /packages/All/lcms2-2.9.txz
Installing /packages/All/openjpeg-2.3.1.txz
Installing /packages/All/harfbuzz-icu-2.6.5_2.txz
Installing /packages/All/sqlite3-3.31.1_1,1.txz
Installing /packages/All/libproxy-0.4.15.txz
Installing /packages/All/gsettings-desktop-schemas-3.28.1.txz
Installing /packages/All/glib-networking-2.56.1_2.txz
Installing /packages/All/libsoup-2.62.3.txz
Installing /packages/All/brotli-1.0.7_2,1.txz
Installing /packages/All/woff2-1.0.2_4.txz
Installing /packages/All/xkeyboard-config-2.29.txz
Installing /packages/All/libxkbcommon-0.10.0_2.txz
=====
Message from libxkbcommon-0.10.0_2:

--
If arrow keys don't work under X11 switch to legacy rules e.g.,

For sh/bash/ksh/zsh run and (optionally) add into ~/.profile:
  export XKB_DEFAULT_RULES=xorg

For csh/tcsh run and (optionally) add into ~/.login:
  setenv XKB_DEFAULT_RULES xorg
Installing /packages/All/libwpe-1.4.0.1.txz
Installing /packages/All/wpebackend-fdo-1.4.1.txz
Installing /packages/All/libepoxy-1.5.4.txz
Installing /packages/All/libXScrnSaver-1.2.3_2.txz
Installing /packages/All/argyllcms-1.9.2_5.txz
Installing /packages/All/colord-1.3.5.txz
===> Creating groups.
Creating group 'colord' with gid '970'.
===> Creating users
Creating user 'colord' with uid '970'.
Installing /packages/All/libXtst-1.2.3_2.txz
Installing /packages/All/at-spi2-core-2.28.0.txz
Installing /packages/All/at-spi2-atk-2.26.2.txz
Installing /packages/All/adwaita-icon-theme-3.28.0.txz
Installing /packages/All/libcroco-0.6.13.txz
Installing /packages/All/libgsf-1.14.46.txz
Installing /packages/All/librsvg2-2.40.21.txz
Installing /packages/All/wayland-protocols-1.20.txz
Installing /packages/All/gtk3-3.24.10_1.txz
Installing /packages/All/libunwind-20170615_1.txz
Installing /packages/All/gstreamer1-1.16.2.txz
Installing /packages/All/json-glib-1.4.4.txz
Installing /packages/All/geoclue-2.5.5.txz
Installing /packages/All/orc-0.4.31.txz
Installing /packages/All/iso-codes-4.2.txz
Installing /packages/All/gstreamer1-plugins-1.16.2.txz
Installing /packages/All/gstreamer1-plugins-bad-1.16.2.txz
Installing /packages/All/pygobject3-common-3.28.3.txz
Installing /packages/All/py37-setuptools-44.0.0.txz
Installing /packages/All/py37-cairo-1.18.1_1.txz
Installing /packages/All/py37-gobject3-3.28.3.txz
Installing /packages/All/graphene-1.10.0.txz
Installing /packages/All/libGLU-9.0.1.txz
Installing /packages/All/gstreamer1-plugins-gl-1.16.2.txz
Installing /packages/All/libXt-1.2.0,1.txz
Installing /packages/All/webkit2-gtk3-2.28.1_1.txz
Installing /packages/All/yelp-xsl-3.28.0.txz
Installing /packages/All/desktop-file-utils-0.24.txz
Installing /packages/All/yelp-3.28.1_2.txz
Installing /packages/All/mate-user-guide-1.22.3.txz
Installing /packages/All/libexif-0.6.21_5.txz
Installing /packages/All/exempi-2.2.2_1.txz
Installing /packages/All/xcb-util-0.4.0_2,1.txz
Installing /packages/All/startup-notification-0.12_4.txz
Installing /packages/All/dconf-0.28.0.txz
Installing /packages/All/mate-desktop-1.22.2.txz
Installing /packages/All/mate-icon-theme-1.22.2.txz
Installing /packages/All/caja-1.22.3.txz
Installing /packages/All/libogg-1.3.4,4.txz
Installing /packages/All/libvorbis-1.3.6,3.txz
Installing /packages/All/libltdl-2.4.6.txz
Installing /packages/All/libcanberra-0.30_5.txz
Installing /packages/All/libcanberra-gtk3-0.30_5.txz
Installing /packages/All/libxkbfile-1.1.0.txz
Installing /packages/All/xkbcomp-1.4.3.txz
Installing /packages/All/libxklavier-5.3_1,1.txz
Installing /packages/All/libunique-3.0.2_3.txz
Installing /packages/All/libmatekbd-1.22.0.txz
Installing /packages/All/libgtop-2.38.0_2.txz
=====
Message from libgtop-2.38.0_2:

--
In order to use the File System read/write monitor, you must chmod
/dev/devstat so that all users can open it read-only.  For example:

# chmod 0444 /dev/devstat

In order for this to persist across reboots, add the following to
/etc/devfs.conf:

perm	devstat	0444
Installing /packages/All/zenity-3.28.1.txz
Installing /packages/All/marco-1.22.4.txz
Installing /packages/All/python27-2.7.18.txz
=====
Message from python27-2.7.18:

--
Note that some standard Python modules are provided as separate ports
as they require additional dependencies. They are available as:

bsddb           databases/py-bsddb
gdbm            databases/py-gdbm
sqlite3         databases/py-sqlite3
tkinter         x11-toolkits/py-tkinter
Installing /packages/All/mate-menus-1.22.1.txz
=====
Message from mate-menus-1.22.1:

--
===>   NOTICE:

This port is deprecated; you may wish to reconsider installing it:

Uses Python 2.7 which is EOLed upstream.

It is scheduled to be removed on or after 2020-12-31.
Installing /packages/All/nss-3.52.txz
Installing /packages/All/alsa-lib-1.1.2_2.txz
=====
Message from alsa-lib-1.1.2_2:

--
===>   NOTICE:

The alsa-lib port currently does not have a maintainer. As a result, it is
more likely to have unresolved issues, not be up-to-date, or even be removed in
the future. To volunteer to maintain this port, please create an issue at:

https://bugs.freebsd.org/bugzilla

More information about port maintainership is available at:

https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port
Installing /packages/All/libmatemixer-1.22.0.txz
Installing /packages/All/libXmu-1.1.3,1.txz
Installing /packages/All/xrdb-1.2.0.txz
Installing /packages/All/mate-settings-daemon-1.22.1.txz
Installing /packages/All/mate-control-center-1.22.2.txz
Installing /packages/All/libXres-1.2.0_2.txz
Installing /packages/All/libwnck3-3.24.1.txz
Installing /packages/All/mate-notification-daemon-1.22.1.txz
Installing /packages/All/libmateweather-1.22.1.txz
Installing /packages/All/mate-panel-1.22.2.txz
Installing /packages/All/accountsservice-0.6.42.txz
Installing /packages/All/mate-polkit-1.22.0.txz
Installing /packages/All/upower-0.99.11.txz
Installing /packages/All/libdmx-1.1.4_2.txz
Installing /packages/All/libXxf86dga-1.1.5.txz
Installing /packages/All/xdpyinfo-1.3.2_3.txz
Installing /packages/All/mate-session-manager-1.22.3.txz
Installing /packages/All/mate-base-1.22.2.txz
=====
Message from mate-base-1.22.2:

--
Congratulations!  MATE base has been successfully installed on your system.
For help on starting it up, as well as answers to common questions, and
some known issues, please see the FreeBSD GNOME homepage at:

                       http://www.FreeBSD.org/gnome/
Installing /packages/All/pcre2-10.35.txz
Installing /packages/All/vte3-0.52.2_3.txz
Installing /packages/All/mate-terminal-1.22.1.txz
Installing /packages/All/pam_helper-1.1.txz
Installing /packages/All/mate-screensaver-1.22.2.txz
Installing /packages/All/mate-calc-1.22.2.txz
Installing /packages/All/mate-utils-1.22.2.txz
Installing /packages/All/libsigc++-2.10.2.txz
Installing /packages/All/glibmm-2.56.0_2,1.txz
Installing /packages/All/atkmm-2.24.2_4.txz
Installing /packages/All/libxml++-2.40.1,1.txz
Installing /packages/All/cairomm-1.12.2_4.txz
Installing /packages/All/pangomm-2.40.1_4.txz
Installing /packages/All/gtkmm30-3.22.2.txz
Installing /packages/All/mate-system-monitor-1.22.2.txz
Installing /packages/All/libpeas-1.22.0.txz
Installing /packages/All/eom-1.22.2.txz
Installing /packages/All/gtar-1.32.txz
Installing /packages/All/unzip-6.0_8.txz
Installing /packages/All/engrampa-1.22.2.txz
Installing /packages/All/poppler-data-0.4.9_2.txz
Installing /packages/All/poppler-0.88.0.txz
Installing /packages/All/poppler-glib-0.88.0.txz
Installing /packages/All/libidn-1.35.txz
Installing /packages/All/jbig2dec-0.18.txz
Installing /packages/All/ghostscript9-agpl-base-9.52_4.txz
=====
Message from ghostscript9-agpl-base-9.52_4:

--
This package installs a script named dvipdf that depends on dvips.  If you
want to use this script you need to install print/tex-dvipsk.
Installing /packages/All/libspectre-0.2.8.txz
Installing /packages/All/djvulibre-3.5.27_2.txz
Installing /packages/All/liblz4-1.9.2_1,1.txz
Installing /packages/All/lzo2-2.10_1.txz
Installing /packages/All/libarchive-3.4.2,1.txz
Installing /packages/All/libgxps-0.3.1.txz
Installing /packages/All/atril-1.22.3_5.txz
Installing /packages/All/mate-media-1.22.2.txz
Installing /packages/All/libgnome-keyring-3.12.0_2.txz
Installing /packages/All/gcr-3.28.0.txz
Installing /packages/All/libassuan-2.5.3.txz
Installing /packages/All/pinentry-gnome3-1.1.0.txz
Installing /packages/All/gnome-keyring-3.28.2_2.txz
=====
Message from gnome-keyring-3.28.2_2:

--
Gnome-keyring uses pinentry-gnome3 for gpg interactions, please add the
following line to your ~/.gnupg/gpg-agent.conf to enable the pinentry
dialog.

pinentry-program /usr/local/bin/pinentry-gnome3
Installing /packages/All/mate-power-manager-1.22.2.txz
Installing /packages/All/gssdp-1.2.2.txz
Installing /packages/All/e2fsprogs-libuuid-1.45.6.txz
Installing /packages/All/gupnp-1.1.1_1.txz
Installing /packages/All/caja-extensions-1.22.1.txz
Installing /packages/All/mozo-1.22.2.txz
Installing /packages/All/gucharmap-11.0.1_1.txz
Installing /packages/All/gtksourceview3-3.24.8_3.txz
Installing /packages/All/py27-setuptools-44.0.0.txz
=====
Message from py27-setuptools-44.0.0:

--
Only /usr/local/bin/easy_install-2.7 script has been installed
  since Python 2.7 is not the default Python version.
--
===>   NOTICE:

This port is deprecated; you may wish to reconsider installing it:

Uses Python 2.7 which is EOLed upstream.

It is scheduled to be removed on or after 2020-12-31.
Installing /packages/All/py27-cairo-1.18.1_1.txz
=====
Message from py27-cairo-1.18.1_1:

--
===>   NOTICE:

This port is deprecated; you may wish to reconsider installing it:

Uses Python 2.7 which is EOLed upstream.

It is scheduled to be removed on or after 2020-12-31.
Installing /packages/All/py27-gobject3-3.28.3.txz
=====
Message from py27-gobject3-3.28.3:

--
===>   NOTICE:

This port is deprecated; you may wish to reconsider installing it:

Uses Python 2.7 which is EOLed upstream.

It is scheduled to be removed on or after 2020-12-31.
Installing /packages/All/mate-applets-1.22.2.txz
=====
Message from mate-applets-1.22.2:

--
===>   NOTICE:

This port is deprecated; you may wish to reconsider installing it:

Uses Python 2.7 which is EOLed upstream.

It is scheduled to be removed on or after 2020-12-31.
Installing /packages/All/enchant-1.6.0_9.txz
Installing /packages/All/libsoup-gnome-2.62.3.txz
Installing /packages/All/libcddb-1.3.2_4.txz
Installing /packages/All/libcdio-2.1.0.txz
Installing /packages/All/popt-1.16_2.txz
Installing /packages/All/libinotify-20180201_2.txz
=====
Message from libinotify-20180201_2:

--
Libinotify functionality on FreeBSD is missing support for

  - detecting a file being moved into or out of a directory within the
    same filesystem
  - certain modifications to a symbolic link (rather than the
    file it points to.)

in addition to the known limitations on all platforms using kqueue(2)
where various open and close notifications are unimplemented.

This means the following regression tests will fail:

Directory notifications:
   IN_MOVED_FROM
   IN_MOVED_TO

Open/close notifications:
   IN_OPEN
   IN_CLOSE_NOWRITE
   IN_CLOSE_WRITE

Symbolic Link notifications:
   IN_DONT_FOLLOW
   IN_ATTRIB
   IN_MOVE_SELF
   IN_DELETE_SELF

Kernel patches to address the missing directory and symbolic link
notifications are available from:

https://github.com/libinotify-kqueue/libinotify-kqueue/tree/master/patches

You might want to consider increasing the kern.maxfiles tunable if you plan
to use this library for applications that need to monitor activity of a lot
of files.
Installing /packages/All/gamin-0.1.10_10.txz
=====
Message from gamin-0.1.10_10:

--
Gamin will only provide realtime notification of changes for at most n files,
where n is the minimum value between (kern.maxfiles * 0.7) and
(kern.maxfilesperproc - 200). Beyond that limit, files will be polled.

If you often open several large folders with Nautilus, you might want to
increase the kern.maxfiles tunable (you do not need to set
kern.maxfilesperproc, since it is computed at boot time from kern.maxfiles).

The behavior of gamin can be controlled via the various gaminrc files.
See http://www.gnome.org/~veillard/gamin/config.html on how to create
these files.  In particular, if you find gam_server is taking up too much
CPU time polling for changes, something like the following may help
in one of the gaminrc files:

# reduce polling frequency to once per 10 seconds
# for UFS file systems in order to lower CPU load
fsset ufs poll 10
--
===>   NOTICE:

The gamin port currently does not have a maintainer. As a result, it is
more likely to have unresolved issues, not be up-to-date, or even be removed in
the future. To volunteer to maintain this port, please create an issue at:

https://bugs.freebsd.org/bugzilla

More information about port maintainership is available at:

https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port
Installing /packages/All/jansson-2.12.txz
Installing /packages/All/talloc-2.3.0.txz
Installing /packages/All/tevent-0.10.1.txz
Installing /packages/All/tdb-1.4.2,1.txz
Installing /packages/All/lmdb-0.9.24_1,1.txz
Installing /packages/All/py37-iso8601-0.1.12.txz
Installing /packages/All/krb5-1.18.1.txz
Installing /packages/All/samba410-4.10.15.txz
=====
Message from samba410-4.10.15:

--
How to start: http://wiki.samba.org/index.php/Samba4/HOWTO

* Your configuration is: /usr/local/etc/smb4.conf

* All the relevant databases are under: /var/db/samba4

* All the logs are under: /var/log/samba4

* Provisioning script is: /usr/local/bin/samba-tool

For additional documentation check: http://wiki.samba.org/index.php/Samba4

Bug reports should go to the: https://bugzilla.samba.org/
Installing /packages/All/gvfs-1.30.4_3.txz
Installing /packages/All/pluma-1.22.2.txz

SUCCEEDED 00:02:18

-------------------------------------------------------------------------------
-- Phase: check-sanity
-------------------------------------------------------------------------------


SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: pkg-depends
-------------------------------------------------------------------------------

===>   mate-1.22.2 depends on file: /usr/local/sbin/pkg - found

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: fetch-depends
-------------------------------------------------------------------------------


SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: fetch
-------------------------------------------------------------------------------

===>   mate-1.22.2 depends on file: /usr/local/sbin/pkg - found
===> Fetching all distfiles required by mate-1.22.2 for building

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: checksum
-------------------------------------------------------------------------------

===>   mate-1.22.2 depends on file: /usr/local/sbin/pkg - found
===> Fetching all distfiles required by mate-1.22.2 for building

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: extract-depends
-------------------------------------------------------------------------------


SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: extract
-------------------------------------------------------------------------------

===>   mate-1.22.2 depends on file: /usr/local/sbin/pkg - found
===> Fetching all distfiles required by mate-1.22.2 for building
===>  Extracting for mate-1.22.2

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: patch-depends
-------------------------------------------------------------------------------


SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: patch
-------------------------------------------------------------------------------

===>  Patching for mate-1.22.2

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: build-depends
-------------------------------------------------------------------------------


SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: lib-depends
-------------------------------------------------------------------------------


SUCCEEDED 00:00:01

-------------------------------------------------------------------------------
-- Phase: configure
-------------------------------------------------------------------------------

===>  Configuring for mate-1.22.2

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: build
-------------------------------------------------------------------------------


SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: run-depends
-------------------------------------------------------------------------------

===>   mate-1.22.2 depends on package: mate-base>=1.22.0 - found
===>   mate-1.22.2 depends on package: mate-themes>=0 - found
===>   mate-1.22.2 depends on executable: mate-terminal - found
===>   mate-1.22.2 depends on executable: mate-screensaver - found
===>   mate-1.22.2 depends on executable: mate-calc - found
===>   mate-1.22.2 depends on executable: mate-screenshot - found
===>   mate-1.22.2 depends on executable: mate-system-monitor - found
===>   mate-1.22.2 depends on executable: eom - found
===>   mate-1.22.2 depends on executable: engrampa - found
===>   mate-1.22.2 depends on executable: atril - found
===>   mate-1.22.2 depends on executable: mate-volume-control - found
===>   mate-1.22.2 depends on executable: mate-power-manager - found
===>   mate-1.22.2 depends on executable: caja-sendto - found
===>   mate-1.22.2 depends on executable: mozo - found
===>   mate-1.22.2 depends on package: mate-applets>=1.22.0 - found
===>   mate-1.22.2 depends on file: /usr/local/libdata/pkgconfig/pluma.pc - found

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: stage
-------------------------------------------------------------------------------

===>  Staging for mate-1.22.2
===>   mate-1.22.2 depends on package: mate-base>=1.22.0 - found
===>   mate-1.22.2 depends on package: mate-themes>=0 - found
===>   mate-1.22.2 depends on executable: mate-terminal - found
===>   mate-1.22.2 depends on executable: mate-screensaver - found
===>   mate-1.22.2 depends on executable: mate-calc - found
===>   mate-1.22.2 depends on executable: mate-screenshot - found
===>   mate-1.22.2 depends on executable: mate-system-monitor - found
===>   mate-1.22.2 depends on executable: eom - found
===>   mate-1.22.2 depends on executable: engrampa - found
===>   mate-1.22.2 depends on executable: atril - found
===>   mate-1.22.2 depends on executable: mate-volume-control - found
===>   mate-1.22.2 depends on executable: mate-power-manager - found
===>   mate-1.22.2 depends on executable: caja-sendto - found
===>   mate-1.22.2 depends on executable: mozo - found
===>   mate-1.22.2 depends on package: mate-applets>=1.22.0 - found
===>   mate-1.22.2 depends on file: /usr/local/libdata/pkgconfig/pluma.pc - found
===>   Generating temporary packing list
====> Compressing man pages (compress-man)
====> Running Q/A tests (stage-qa)
Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks

SUCCEEDED 00:00:00

-------------------------------------------------------------------------------
-- Phase: package
-------------------------------------------------------------------------------

===>  Building package for mate-1.22.2
file sizes/checksums     [0]:   0%
file sizes/checksums     [0]: 100%
packing files            [0]:   0%
packing files            [0]: 100%
packing directories      [0]:   0%
packing directories      [0]: 100%

SUCCEEDED 00:00:00
TOTAL TIME 00:02:19