------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/smartmontools-7.1_1.txz ===== Message from smartmontools-7.1_1: -- smartmontools has been installed To check the status of drives, use the following: /usr/local/sbin/smartctl -a /dev/ad0 for first ATA/SATA drive /usr/local/sbin/smartctl -a /dev/da0 for first SCSI drive /usr/local/sbin/smartctl -a /dev/ada0 for first SATA drive To include drive health information in your daily status reports, add a line like the following to /etc/periodic.conf: daily_status_smart_devices="/dev/ad0 /dev/da0" substituting the appropriate device names for your SMART-capable disks. To enable drive monitoring, you can use /usr/local/sbin/smartd. A sample configuration file has been installed as /usr/local/etc/smartd.conf.sample Copy this file to /usr/local/etc/smartd.conf and edit appropriately To have smartd start at boot echo 'smartd_enable="YES"' >> /etc/rc.conf SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> scterc-0.0.1 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> scterc-0.0.1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by scterc-0.0.1 for building SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> scterc-0.0.1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by scterc-0.0.1 for building => SHA256 Checksum OK for AMDmi3-scterc-rc.d-0.0.1_GH0.tar.gz. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> scterc-0.0.1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by scterc-0.0.1 for building ===> Extracting for scterc-0.0.1 => SHA256 Checksum OK for AMDmi3-scterc-rc.d-0.0.1_GH0.tar.gz. Extracted Memory Use: 0.01M SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for scterc-0.0.1 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> Configuring for scterc-0.0.1 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- ===> scterc-0.0.1 depends on executable: smartctl - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for scterc-0.0.1 ===> scterc-0.0.1 depends on executable: smartctl - found ===> Generating temporary packing list install -m 555 /construction/sysutils/scterc/scterc-rc.d-0.0.1/scterc.sh /construction/sysutils/scterc/stage/usr/local/etc/rc.d/scterc /bin/mkdir -p /construction/sysutils/scterc/stage/usr/local/share/doc/scterc install -m 0644 /construction/sysutils/scterc/scterc-rc.d-0.0.1/README.md /construction/sysutils/scterc/stage/usr/local/share/doc/scterc/ ====> Compressing man pages (compress-man) ====> Running Q/A tests (stage-qa) Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks Warning: Possible REINPLACE_CMD issues sed failed: file content unchanged from backup: scterc.sh SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for scterc-0.0.1 file sizes/checksums [2]: 0% file sizes/checksums [2]: 100% packing files [2]: 0% packing files [2]: 100% packing directories [0]: 0% packing directories [0]: 100% SUCCEEDED 00:00:00 TOTAL TIME 00:00:02