------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gmp-6.2.0.txz Installing /packages/All/nettle-3.5.1_1.txz Installing /packages/All/libtasn1-4.16.0.txz Installing /packages/All/libunistring-0.9.10_1.txz Installing /packages/All/libidn2-2.3.0_1.txz Installing /packages/All/libffi-3.2.1_3.txz Installing /packages/All/ca_root_nss-3.52.txz ===== Message from ca_root_nss-3.52: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/p11-kit-0.23.20.txz Installing /packages/All/tpm-emulator-0.7.4_2.txz ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. Installing /packages/All/openssl-1.1.1g,1.txz Installing /packages/All/trousers-0.3.14_2.txz ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. ===== Message from trousers-0.3.14_2: -- To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Installing /packages/All/gettext-runtime-0.20.2.txz Installing /packages/All/gnutls-3.6.13.txz Installing /packages/All/boehm-gc-8.0.4_1.txz Installing /packages/All/boehm-gc-threaded-8.0.4_1.txz Installing /packages/All/libltdl-2.4.6.txz Installing /packages/All/ncurses-6.1.20190525.txz Installing /packages/All/readline-8.0.4.txz Installing /packages/All/gdbm-1.18.1_1.txz Installing /packages/All/mailutils-3.9.txz Installing /packages/All/libxml2-2.9.10.txz Installing /packages/All/coreutils-8.31.txz Installing /packages/All/emacs-nox-26.3_4,3.txz Installing /packages/All/gmake-4.3.txz Installing /packages/All/libiconv-1.14_11.txz Installing /packages/All/perl5-5.30.2.txz ===== Message from perl5-5.30.2: -- The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Installing /packages/All/p5-Locale-libintl-1.31.txz Installing /packages/All/p5-Text-Unidecode-1.30.txz Installing /packages/All/p5-Unicode-EastAsianWidth-12.0.txz Installing /packages/All/texinfo-6.7_2,1.txz SUCCEEDED 00:00:22 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> tramp-emacs26_nox-2.3.0_8 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> tramp-emacs26_nox-2.3.0_8 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by tramp-emacs26_nox-2.3.0_8 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> tramp-emacs26_nox-2.3.0_8 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by tramp-emacs26_nox-2.3.0_8 for building => SHA256 Checksum OK for tramp-2.3.0.tar.gz. SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> tramp-emacs26_nox-2.3.0_8 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by tramp-emacs26_nox-2.3.0_8 for building ===> Extracting for tramp-emacs26_nox-2.3.0_8 => SHA256 Checksum OK for tramp-2.3.0.tar.gz. Extracted Memory Use: 1.73M SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for tramp-emacs26_nox-2.3.0_8 ===> Applying ports patches for tramp-emacs26_nox-2.3.0_8 ===> Cleanly applied ports patch(es) patch-texi-Makefile.in SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> tramp-emacs26_nox-2.3.0_8 depends on file: /usr/local/bin/emacs-26.3 - found ===> tramp-emacs26_nox-2.3.0_8 depends on package: gmake>=4.3 - found ===> tramp-emacs26_nox-2.3.0_8 depends on file: /usr/local/bin/makeinfo - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> tramp-emacs26_nox-2.3.0_8 depends on file: /usr/local/bin/emacs-26.3 - found ===> tramp-emacs26_nox-2.3.0_8 depends on package: gmake>=4.3 - found ===> tramp-emacs26_nox-2.3.0_8 depends on file: /usr/local/bin/makeinfo - found ===> Configuring for tramp-emacs26_nox-2.3.0_8 configure: loading site script /xports/Templates/config.site configure: Tramp 2.3.0 checking for gmake... gmake checking for reasonable gmake version... ok checking whether gmake sets $(MAKE)... yes checking for /usr/local/bin/emacs-26.3... /usr/local/bin/emacs-26.3 checking for /usr/local/bin/emacs-26.3 version... ok checking for /usr/local/bin/emacs-26.3 gvfs support... no checking for makeinfo... makeinfo checking for reasonable makeinfo version... ok checking for texi2dvi... no configure: WARNING: texi2dvi not found checking for install-info... install-info checking for installation chapter... yes checking prefix... /usr/local checking datarootdir... ${prefix}/share checking datadir... ${datarootdir} checking lispdir... /usr/local/share/emacs/26.3/site-lisp/tramp checking infodir... /usr/local/share/info checking for ftp-upload... no configure: creating ./config.status config.status: creating Makefile config.status: creating test/Makefile config.status: creating lisp/Makefile config.status: creating lisp/trampver.el config.status: creating texi/Makefile config.status: creating texi/trampver.texi configure: regenerate autoloads SUCCEEDED 00:00:03 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for tramp-emacs26_nox-2.3.0_8 gmake[1]: Entering directory '/construction/net/tramp/tramp-2.3.0' gmake[2]: Entering directory '/construction/net/tramp/tramp-2.3.0/lisp' /usr/local/bin/emacs-26.3 --no-site-file -batch -l bytecomp \ --eval "(add-to-list 'load-path default-directory)" \ -f batch-byte-compile trampver.el /usr/local/bin/emacs-26.3 --no-site-file -batch -l bytecomp \ --eval "(add-to-list 'load-path default-directory)" \ -f batch-byte-compile tramp.el /usr/local/bin/emacs-26.3 --no-site-file -batch -l bytecomp \ --eval "(add-to-list 'load-path default-directory)" \ -f batch-byte-compile tramp-adb.el /usr/local/bin/emacs-26.3 --no-site-file -batch -l bytecomp \ --eval "(add-to-list 'load-path default-directory)" \ -f batch-byte-compile tramp-cache.el /usr/local/bin/emacs-26.3 --no-site-file -batch -l bytecomp \ --eval "(add-to-list 'load-path default-directory)" \ -f batch-byte-compile tramp-cmds.el /usr/local/bin/emacs-26.3 --no-site-file -batch -l bytecomp \ --eval "(add-to-list 'load-path default-directory)" \ -f batch-byte-compile tramp-compat.el /usr/local/bin/emacs-26.3 --no-site-file -batch -l bytecomp \ --eval "(add-to-list 'load-path default-directory)" \ -f batch-byte-compile tramp-ftp.el /usr/local/bin/emacs-26.3 --no-site-file -batch -l bytecomp \ --eval "(add-to-list 'load-path default-directory)" \ -f batch-byte-compile tramp-gw.el /usr/local/bin/emacs-26.3 --no-site-file -batch -l bytecomp \ --eval "(add-to-list 'load-path default-directory)" \ -f batch-byte-compile tramp-sh.el /usr/local/bin/emacs-26.3 --no-site-file -batch -l bytecomp \ --eval "(add-to-list 'load-path default-directory)" \ -f batch-byte-compile tramp-smb.el /usr/local/bin/emacs-26.3 --no-site-file -batch -l bytecomp \ --eval "(add-to-list 'load-path default-directory)" \ -f batch-byte-compile tramp-uu.el gmake[2]: Leaving directory '/construction/net/tramp/tramp-2.3.0/lisp' gmake[2]: Entering directory '/construction/net/tramp/tramp-2.3.0/texi' makeinfo --no-warn --no-split -D installchapter --dvi -o tramp.dvi tramp.texi makeinfo --no-warn --no-split -D installchapter --html -o tramp.html tramp.texi makeinfo --no-warn --no-split -D installchapter --pdf -o tramp.pdf tramp.texi makeinfo --no-warn --no-split -D installchapter --footnote-style=end -o ../info/tramp.info tramp.texi You don't have a working TeX binary (tex) installed anywhere in your PATH, and texi2dvi cannot proceed without one. If you want to use this script, you'll need to install TeX (if you don't have it) or change your PATH or TEX environment variable (if you do). See the --help output for more details. For information about obtaining TeX, please see http://tug.org/texlive, or do a web search for TeX and your operating system or distro. gmake[2]: [Makefile:89: pdf] Error 1 (ignored) You don't have a working TeX binary (tex) installed anywhere in your PATH, and texi2dvi cannot proceed without one. If you want to use this script, you'll need to install TeX (if you don't have it) or change your PATH or TEX environment variable (if you do). See the --help output for more details. For information about obtaining TeX, please see http://tug.org/texlive, or do a web search for TeX and your operating system or distro. gmake[2]: [Makefile:89: dvi] Error 1 (ignored) cp dir_sample ../info/dir install-info --quiet --info-dir=../info/ ../info/tramp.info gmake[2]: Leaving directory '/construction/net/tramp/tramp-2.3.0/texi' gmake[1]: Leaving directory '/construction/net/tramp/tramp-2.3.0' SUCCEEDED 00:00:06 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- ===> tramp-emacs26_nox-2.3.0_8 depends on file: /usr/local/bin/emacs-26.3 - found ===> tramp-emacs26_nox-2.3.0_8 depends on executable: indexinfo - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for tramp-emacs26_nox-2.3.0_8 ===> tramp-emacs26_nox-2.3.0_8 depends on file: /usr/local/bin/emacs-26.3 - found ===> tramp-emacs26_nox-2.3.0_8 depends on executable: indexinfo - found ===> Generating temporary packing list gmake[1]: Entering directory '/construction/net/tramp/tramp-2.3.0' gmake[2]: Entering directory '/construction/net/tramp/tramp-2.3.0/lisp' install -m644 trampver.el tramp.el tramp-adb.el tramp-cache.el tramp-cmds.el tramp-compat.el tramp-ftp.el tramp-gw.el tramp-sh.el tramp-smb.el tramp-uu.el tramp-loaddefs.el trampver.elc tramp.elc tramp-adb.elc tramp-cache.elc tramp-cmds.elc tramp-compat.elc tramp-ftp.elc tramp-gw.elc tramp-sh.elc tramp-smb.elc tramp-uu.elc /construction/net/tramp/stage/usr/local/share/emacs/26.3/site-lisp/tramp gmake[2]: Leaving directory '/construction/net/tramp/tramp-2.3.0/lisp' gmake[2]: Entering directory '/construction/net/tramp/tramp-2.3.0/texi' install-info --quiet --info-dir=../info/ ../info/tramp.info install -m644 ../info/tramp.info /construction/net/tramp/stage/usr/local/share/info cp dir_sample /construction/net/tramp/stage/usr/local/share/info/dir install-info --quiet --info-dir=/construction/net/tramp/stage/usr/local/share/info/ /construction/net/tramp/stage/usr/local/share/info/tramp.info gmake[2]: Leaving directory '/construction/net/tramp/tramp-2.3.0/texi' gmake[1]: Leaving directory '/construction/net/tramp/tramp-2.3.0' ====> Compressing man pages (compress-man) ====> Running Q/A tests (stage-qa) Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for tramp-emacs26_nox-2.3.0_8 file sizes/checksums [24]: 0% file sizes/checksums [24]: 100% packing files [24]: 0% packing files [24]: 100% packing directories [0]: 0% packing directories [0]: 100% SUCCEEDED 00:00:01 TOTAL TIME 00:00:34