------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gettext-runtime-0.20.2.txz Installing /packages/All/gmake-4.3.txz Installing /packages/All/pkgconf-1.6.3,1.txz Installing /packages/All/libdaemon-0.14_1.txz SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> radvd-2.18_1 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> radvd-2.18_1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by radvd-2.18_1 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> radvd-2.18_1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by radvd-2.18_1 for building => SHA256 Checksum OK for radvd-2.18.tar.gz. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> radvd-2.18_1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by radvd-2.18_1 for building ===> Extracting for radvd-2.18_1 => SHA256 Checksum OK for radvd-2.18.tar.gz. Extracted Memory Use: 0.93M SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for radvd-2.18_1 ===> Applying ports patches for radvd-2.18_1 ===> Cleanly applied ports patch(es) patch-device-bsd44.c ===> Applying dragonfly patches for radvd-2.18_1 ===> Cleanly applied dragonfly patch(es) patch-configure SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> radvd-2.18_1 depends on package: gmake>=4.3 - found ===> radvd-2.18_1 depends on package: pkgconf>=1.3.0_1 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- ===> radvd-2.18_1 depends on shared library: libdaemon.so - found (/usr/local/lib/libdaemon.so) SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> radvd-2.18_1 depends on package: gmake>=4.3 - found ===> radvd-2.18_1 depends on package: pkgconf>=1.3.0_1 - found ===> radvd-2.18_1 depends on shared library: libdaemon.so - found (/usr/local/lib/libdaemon.so) ===> Configuring for radvd-2.18_1 configure: loading site script /xports/Templates/config.site checking build system type... x86_64-portbld-dragonfly5.9 checking host system type... x86_64-portbld-dragonfly5.9 checking target system type... x86_64-portbld-dragonfly5.9 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether gmake sets $(MAKE)... yes checking whether gmake supports nested variables... yes checking whether gmake supports nested variables... (cached) yes checking architecture... bsd44 checking for style of include used by gmake... GNU checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking whether cc understands -c and -o together... yes checking dependency style of cc... gcc3 checking for cc option to accept ISO C99... none needed checking for ranlib... ranlib checking pkg-config is at least version 0.9.0... yes checking netlink... no checking for library containing clock_gettime... none required checking for rm... /bin/rm checking for sed... (cached) /usr/bin/sed checking for ln... /bin/ln checking for bison... no checking for byacc... byacc checking for flex... flex checking lex output file root... lex.yy checking lex library... -lfl checking whether yytext is a pointer... yes checking for tar... /usr/bin/tar checking for gzip... (cached) /usr/bin/gzip checking where to put logfile... /var/log/radvd.log checking where to put pidfile... /var/run/radvd.pid checking where to find configfile... /usr/local/etc/radvd.conf checking which syslog facility to use... LOG_DAEMON checking for inet_ntop in -lc... yes checking how to run the C preprocessor... cpp checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ANSI C header files... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for getopt.h... (cached) yes checking ifaddrs.h usability... yes checking ifaddrs.h presence... yes checking for ifaddrs.h... yes checking linux/if_arp.h usability... no checking linux/if_arp.h presence... no checking for linux/if_arp.h... no checking machine/limits.h usability... yes checking machine/limits.h presence... yes checking for machine/limits.h... yes checking machine/param.h usability... yes checking machine/param.h presence... yes checking for machine/param.h... yes checking net/if_arp.h usability... yes checking net/if_arp.h presence... yes checking for net/if_arp.h... yes checking net/if_dl.h usability... yes checking net/if_dl.h presence... yes checking for net/if_dl.h... yes checking net/if_types.h usability... yes checking net/if_types.h presence... yes checking for net/if_types.h... yes checking for sys/param.h... (cached) yes checking sys/sockio.h usability... yes checking sys/sockio.h presence... yes checking for sys/sockio.h... yes checking for sys/time.h... (cached) yes checking for time.h... (cached) yes checking whether time.h and sys/time.h may both be included... yes checking whether struct sockaddr_in6 has sin6_scope_id... yes checking whether struct in6_addr has u6_addrXX and defines s6_addrXX... yes checking for getopt_long... yes checking for ppoll... yes checking for sysctl... (cached) yes checking pkg-config is at least version 0.9.0... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating radvd.service config.status: creating redhat/systemd/radvd.spec config.status: creating redhat/SysV/radvd.spec config.status: creating config.h config.status: executing depfiles commands Your build configuration: CPPFLAGS = CFLAGS = -pipe -O2 -fno-strict-aliasing LDFLAGS = Arch = bsd44 Extras: device-bsd44.o prefix: /usr/local PID file: /var/run/radvd.pid Log file: /var/log/radvd.log Config file: /usr/local/etc/radvd.conf Radvd version: 2.18 SUCCEEDED 00:00:06 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for radvd-2.18_1 gmake[1]: Entering directory '/construction/net/radvd/radvd-2.18' gmake all-am gmake[2]: Entering directory '/construction/net/radvd/radvd-2.18' /bin/sh ./ylwrap gram.y y.tab.c gram.c y.tab.h `echo gram.c | sed -e s/cc$/hh/ -e s/cpp$/hpp/ -e s/cxx$/hxx/ -e s/c++$/h++/ -e s/c$/h/` y.output gram.output -- byacc -d depbase=`echo log.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ cc -DINET6=1 -DLOG_FACILITY=LOG_DAEMON -DPATH_RADVD_CONF=\"/usr/local/etc/radvd.conf\" -DPATH_RADVD_LOG=\"/var/log/radvd.log\" -DPATH_RADVD_PID=\"/var/run/radvd.pid\" -DVERSION=\"2.18\" -I. -fno-strict-aliasing -fstack-protector -Wall -Wcast-qual -Wmissing-declarations -Wmissing-prototypes -Wpointer-arith -Wstrict-prototypes -Wno-strict-aliasing -Wno-cast-align -Wno-strict-overflow -pipe -O2 -fno-strict-aliasing -MT log.o -MD -MP -MF $depbase.Tpo -c -o log.o log.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo recv.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ cc -DINET6=1 -DLOG_FACILITY=LOG_DAEMON -DPATH_RADVD_CONF=\"/usr/local/etc/radvd.conf\" -DPATH_RADVD_LOG=\"/var/log/radvd.log\" -DPATH_RADVD_PID=\"/var/run/radvd.pid\" -DVERSION=\"2.18\" -I. -fno-strict-aliasing -fstack-protector -Wall -Wcast-qual -Wmissing-declarations -Wmissing-prototypes -Wpointer-arith -Wstrict-prototypes -Wno-strict-aliasing -Wno-cast-align -Wno-strict-overflow -pipe -O2 -fno-strict-aliasing -MT recv.o -MD -MP -MF $depbase.Tpo -c -o recv.o recv.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo socket.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ cc -DINET6=1 -DLOG_FACILITY=LOG_DAEMON -DPATH_RADVD_CONF=\"/usr/local/etc/radvd.conf\" -DPATH_RADVD_LOG=\"/var/log/radvd.log\" -DPATH_RADVD_PID=\"/var/run/radvd.pid\" -DVERSION=\"2.18\" -I. -fno-strict-aliasing -fstack-protector -Wall -Wcast-qual -Wmissing-declarations -Wmissing-prototypes -Wpointer-arith -Wstrict-prototypes -Wno-strict-aliasing -Wno-cast-align -Wno-strict-overflow -pipe -O2 -fno-strict-aliasing -MT socket.o -MD -MP -MF $depbase.Tpo -c -o socket.o socket.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo util.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ cc -DINET6=1 -DLOG_FACILITY=LOG_DAEMON -DPATH_RADVD_CONF=\"/usr/local/etc/radvd.conf\" -DPATH_RADVD_LOG=\"/var/log/radvd.log\" -DPATH_RADVD_PID=\"/var/run/radvd.pid\" -DVERSION=\"2.18\" -I. -fno-strict-aliasing -fstack-protector -Wall -Wcast-qual -Wmissing-declarations -Wmissing-prototypes -Wpointer-arith -Wstrict-prototypes -Wno-strict-aliasing -Wno-cast-align -Wno-strict-overflow -pipe -O2 -fno-strict-aliasing -MT util.o -MD -MP -MF $depbase.Tpo -c -o util.o util.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo device-common.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ cc -DINET6=1 -DLOG_FACILITY=LOG_DAEMON -DPATH_RADVD_CONF=\"/usr/local/etc/radvd.conf\" -DPATH_RADVD_LOG=\"/var/log/radvd.log\" -DPATH_RADVD_PID=\"/var/run/radvd.pid\" -DVERSION=\"2.18\" -I. -fno-strict-aliasing -fstack-protector -Wall -Wcast-qual -Wmissing-declarations -Wmissing-prototypes -Wpointer-arith -Wstrict-prototypes -Wno-strict-aliasing -Wno-cast-align -Wno-strict-overflow -pipe -O2 -fno-strict-aliasing -MT device-common.o -MD -MP -MF $depbase.Tpo -c -o device-common.o device-common.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo interface.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ cc -DINET6=1 -DLOG_FACILITY=LOG_DAEMON -DPATH_RADVD_CONF=\"/usr/local/etc/radvd.conf\" -DPATH_RADVD_LOG=\"/var/log/radvd.log\" -DPATH_RADVD_PID=\"/var/run/radvd.pid\" -DVERSION=\"2.18\" -I. -fno-strict-aliasing -fstack-protector -Wall -Wcast-qual -Wmissing-declarations -Wmissing-prototypes -Wpointer-arith -Wstrict-prototypes -Wno-strict-aliasing -Wno-cast-align -Wno-strict-overflow -pipe -O2 -fno-strict-aliasing -MT interface.o -MD -MP -MF $depbase.Tpo -c -o interface.o interface.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo process.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ cc -DINET6=1 -DLOG_FACILITY=LOG_DAEMON -DPATH_RADVD_CONF=\"/usr/local/etc/radvd.conf\" -DPATH_RADVD_LOG=\"/var/log/radvd.log\" -DPATH_RADVD_PID=\"/var/run/radvd.pid\" -DVERSION=\"2.18\" -I. -fno-strict-aliasing -fstack-protector -Wall -Wcast-qual -Wmissing-declarations -Wmissing-prototypes -Wpointer-arith -Wstrict-prototypes -Wno-strict-aliasing -Wno-cast-align -Wno-strict-overflow -pipe -O2 -fno-strict-aliasing -MT process.o -MD -MP -MF $depbase.Tpo -c -o process.o process.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo radvd.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ cc -DINET6=1 -DLOG_FACILITY=LOG_DAEMON -DPATH_RADVD_CONF=\"/usr/local/etc/radvd.conf\" -DPATH_RADVD_LOG=\"/var/log/radvd.log\" -DPATH_RADVD_PID=\"/var/run/radvd.pid\" -DVERSION=\"2.18\" -I. -fno-strict-aliasing -fstack-protector -Wall -Wcast-qual -Wmissing-declarations -Wmissing-prototypes -Wpointer-arith -Wstrict-prototypes -Wno-strict-aliasing -Wno-cast-align -Wno-strict-overflow -pipe -O2 -fno-strict-aliasing -MT radvd.o -MD -MP -MF $depbase.Tpo -c -o radvd.o radvd.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo send.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ cc -DINET6=1 -DLOG_FACILITY=LOG_DAEMON -DPATH_RADVD_CONF=\"/usr/local/etc/radvd.conf\" -DPATH_RADVD_LOG=\"/var/log/radvd.log\" -DPATH_RADVD_PID=\"/var/run/radvd.pid\" -DVERSION=\"2.18\" -I. -fno-strict-aliasing -fstack-protector -Wall -Wcast-qual -Wmissing-declarations -Wmissing-prototypes -Wpointer-arith -Wstrict-prototypes -Wno-strict-aliasing -Wno-cast-align -Wno-strict-overflow -pipe -O2 -fno-strict-aliasing -MT send.o -MD -MP -MF $depbase.Tpo -c -o send.o send.c &&\ mv -f $depbase.Tpo $depbase.Po device-common.c: In function 'check_device': device-common.c:25:2: warning: 'strncpy' output may be truncated copying 15 bytes from a string of length 15 [-Wstringop-truncation] strncpy(ifr.ifr_name, iface->props.name, IFNAMSIZ - 1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ updating gram.h depbase=`echo timer.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ cc -DINET6=1 -DLOG_FACILITY=LOG_DAEMON -DPATH_RADVD_CONF=\"/usr/local/etc/radvd.conf\" -DPATH_RADVD_LOG=\"/var/log/radvd.log\" -DPATH_RADVD_PID=\"/var/run/radvd.pid\" -DVERSION=\"2.18\" -I. -fno-strict-aliasing -fstack-protector -Wall -Wcast-qual -Wmissing-declarations -Wmissing-prototypes -Wpointer-arith -Wstrict-prototypes -Wno-strict-aliasing -Wno-cast-align -Wno-strict-overflow -pipe -O2 -fno-strict-aliasing -MT timer.o -MD -MP -MF $depbase.Tpo -c -o timer.o timer.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo device-bsd44.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ cc -DINET6=1 -DLOG_FACILITY=LOG_DAEMON -DPATH_RADVD_CONF=\"/usr/local/etc/radvd.conf\" -DPATH_RADVD_LOG=\"/var/log/radvd.log\" -DPATH_RADVD_PID=\"/var/run/radvd.pid\" -DVERSION=\"2.18\" -I. -fno-strict-aliasing -fstack-protector -Wall -Wcast-qual -Wmissing-declarations -Wmissing-prototypes -Wpointer-arith -Wstrict-prototypes -Wno-strict-aliasing -Wno-cast-align -Wno-strict-overflow -pipe -O2 -fno-strict-aliasing -MT device-bsd44.o -MD -MP -MF $depbase.Tpo -c -o device-bsd44.o device-bsd44.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo radvdump.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ cc -DINET6=1 -DLOG_FACILITY=LOG_DAEMON -DPATH_RADVD_CONF=\"/usr/local/etc/radvd.conf\" -DPATH_RADVD_LOG=\"/var/log/radvd.log\" -DPATH_RADVD_PID=\"/var/run/radvd.pid\" -DVERSION=\"2.18\" -I. -fno-strict-aliasing -fstack-protector -Wall -Wcast-qual -Wmissing-declarations -Wmissing-prototypes -Wpointer-arith -Wstrict-prototypes -Wno-strict-aliasing -Wno-cast-align -Wno-strict-overflow -pipe -O2 -fno-strict-aliasing -MT radvdump.o -MD -MP -MF $depbase.Tpo -c -o radvdump.o radvdump.c &&\ mv -f $depbase.Tpo $depbase.Po /usr/bin/sed \ -e 's,@''VERSION''@,2.18,g' \ -e 's,@''sbindir''@,/usr/local/sbin,g' \ -e 's,@''PATH_RADVD_CONF''@,/usr/local/etc/radvd.conf,g' \ -e 's,@''PATH_RADVD_PID''@,/var/run/radvd.pid,g' \ -e 's,@''PATH_RADVD_LOG''@,/var/log/radvd.log,g' \ -e 's,@''LOG_FACILITY''@,LOG_DAEMON,g' \ radvd.8.man > radvd.8 /usr/bin/sed \ -e 's,@''VERSION''@,2.18,g' \ -e 's,@''sbindir''@,/usr/local/sbin,g' \ -e 's,@''PATH_RADVD_CONF''@,/usr/local/etc/radvd.conf,g' \ -e 's,@''PATH_RADVD_PID''@,/var/run/radvd.pid,g' \ -e 's,@''PATH_RADVD_LOG''@,/var/log/radvd.log,g' \ -e 's,@''LOG_FACILITY''@,LOG_DAEMON,g' \ radvd.conf.5.man > radvd.conf.5 /usr/bin/sed \ -e 's,@''VERSION''@,2.18,g' \ -e 's,@''sbindir''@,/usr/local/sbin,g' \ -e 's,@''PATH_RADVD_CONF''@,/usr/local/etc/radvd.conf,g' \ -e 's,@''PATH_RADVD_PID''@,/var/run/radvd.pid,g' \ -e 's,@''PATH_RADVD_LOG''@,/var/log/radvd.log,g' \ -e 's,@''LOG_FACILITY''@,LOG_DAEMON,g' \ radvdump.8.man > radvdump.8 cc -DINET6=1 -DLOG_FACILITY=LOG_DAEMON -DPATH_RADVD_CONF=\"/usr/local/etc/radvd.conf\" -DPATH_RADVD_LOG=\"/var/log/radvd.log\" -DPATH_RADVD_PID=\"/var/run/radvd.pid\" -DVERSION=\"2.18\" -I. -Wno-implicit-function-declaration -pipe -O2 -fno-strict-aliasing -MT libradvd_parser_a-gram.o -MD -MP -MF .deps/libradvd_parser_a-gram.Tpo -c -o libradvd_parser_a-gram.o `test -f 'gram.c' || echo './'`gram.c /bin/sh ./ylwrap scanner.l lex.yy.c scanner.c -- flex device-bsd44.c: In function 'update_device_info': device-bsd44.c:32:2: warning: 'strncpy' output may be truncated copying 15 bytes from a string of length 15 [-Wstringop-truncation] strncpy(ifr.ifr_name, iface->props.name, IFNAMSIZ - 1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc -DINET6=1 -DLOG_FACILITY=LOG_DAEMON -DPATH_RADVD_CONF=\"/usr/local/etc/radvd.conf\" -DPATH_RADVD_LOG=\"/var/log/radvd.log\" -DPATH_RADVD_PID=\"/var/run/radvd.pid\" -DVERSION=\"2.18\" -I. -Wno-implicit-function-declaration -pipe -O2 -fno-strict-aliasing -MT libradvd_parser_a-scanner.o -MD -MP -MF .deps/libradvd_parser_a-scanner.Tpo -c -o libradvd_parser_a-scanner.o `test -f 'scanner.c' || echo './'`scanner.c cc -fno-strict-aliasing -fstack-protector -Wall -Wcast-qual -Wmissing-declarations -Wmissing-prototypes -Wpointer-arith -Wstrict-prototypes -Wno-strict-aliasing -Wno-cast-align -Wno-strict-overflow -pipe -O2 -fno-strict-aliasing -o radvdump log.o recv.o socket.o util.o radvdump.o -lc mv -f .deps/libradvd_parser_a-gram.Tpo .deps/libradvd_parser_a-gram.Po mv -f .deps/libradvd_parser_a-scanner.Tpo .deps/libradvd_parser_a-scanner.Po rm -f libradvd-parser.a ar cru libradvd-parser.a libradvd_parser_a-gram.o libradvd_parser_a-scanner.o /usr/libexec/binutils227/elf/ar: `u' modifier ignored since `D' is the default (see `U') ranlib libradvd-parser.a cc -fno-strict-aliasing -fstack-protector -Wall -Wcast-qual -Wmissing-declarations -Wmissing-prototypes -Wpointer-arith -Wstrict-prototypes -Wno-strict-aliasing -Wno-cast-align -Wno-strict-overflow -pipe -O2 -fno-strict-aliasing -o radvd log.o recv.o socket.o util.o device-common.o interface.o process.o radvd.o send.o timer.o libradvd-parser.a device-bsd44.o -lc gmake[2]: Leaving directory '/construction/net/radvd/radvd-2.18' gmake[1]: Leaving directory '/construction/net/radvd/radvd-2.18' SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for radvd-2.18_1 ===> Generating temporary packing list gmake[1]: Entering directory '/construction/net/radvd/radvd-2.18' gmake[2]: Entering directory '/construction/net/radvd/radvd-2.18' /bin/mkdir -p '/construction/net/radvd/stage/usr/local/sbin' install -s -m 555 radvd radvdump '/construction/net/radvd/stage/usr/local/sbin' /bin/mkdir -p '/construction/net/radvd/stage/usr/local/man/man5' install -m 0644 radvd.conf.5 '/construction/net/radvd/stage/usr/local/man/man5' /bin/mkdir -p '/construction/net/radvd/stage/usr/local/man/man8' install -m 0644 radvd.8 radvdump.8 '/construction/net/radvd/stage/usr/local/man/man8' gmake[2]: Leaving directory '/construction/net/radvd/radvd-2.18' gmake[1]: Leaving directory '/construction/net/radvd/radvd-2.18' install -m 0644 /construction/net/radvd/radvd-2.18/radvd.conf.example /construction/net/radvd/stage/usr/local/etc/radvd.conf.sample install -d /construction/net/radvd/stage/usr/local/share/doc/radvd install -m 0644 /construction/net/radvd/radvd-2.18/CHANGES /construction/net/radvd/radvd-2.18/COPYRIGHT /construction/net/radvd/radvd-2.18/INTRO.html /construction/net/radvd/radvd-2.18/README /construction/net/radvd/radvd-2.18/TODO /construction/net/radvd/stage/usr/local/share/doc/radvd ====> Compressing man pages (compress-man) ===> Staging rc.d startup script(s) ====> Running Q/A tests (stage-qa) Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for radvd-2.18_1 file sizes/checksums [12]: 0% file sizes/checksums [12]: 100% packing files [12]: 0% packing files [12]: 100% packing directories [0]: 0% packing directories [0]: 100% SUCCEEDED 00:00:01 TOTAL TIME 00:00:10