------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/libnghttp2-1.40.0.txz Installing /packages/All/ca_root_nss-3.52.txz ===== Message from ca_root_nss-3.52: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/openssl-1.1.1g,1.txz Installing /packages/All/curl-7.70.0.txz Installing /packages/All/expat-2.2.8.txz Installing /packages/All/jsoncpp-1.9.2.txz Installing /packages/All/libuv-1.37.0.txz Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gettext-runtime-0.20.2.txz Installing /packages/All/rhash-1.3.9.txz Installing /packages/All/liblz4-1.9.2_1,1.txz Installing /packages/All/lzo2-2.10_1.txz Installing /packages/All/libarchive-3.4.2,1.txz Installing /packages/All/ncurses-6.1.20190525.txz Installing /packages/All/cmake-3.17.2.txz Installing /packages/All/pkgconf-1.6.3,1.txz Installing /packages/All/libproxy-0.4.15.txz Installing /packages/All/icu-67.1,1.txz Installing /packages/All/pcre2-10.35.txz Installing /packages/All/pcre-8.43_2.txz Installing /packages/All/libffi-3.2.1_3.txz Installing /packages/All/libxml2-2.9.10.txz Installing /packages/All/libiconv-1.14_11.txz Installing /packages/All/readline-8.0.4.txz Installing /packages/All/python37-3.7.7.txz ===== Message from python37-3.7.7: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py37-gdbm databases/py-gdbm@py37 py37-sqlite3 databases/py-sqlite3@py37 py37-tkinter x11-toolkits/py-tkinter@py37 Installing /packages/All/glib-2.56.3_7,1.txz No schema files found: doing nothing. Installing /packages/All/qtchooser-66_2.txz ===== Message from qtchooser-66_2: -- qtchooser is a wrapper that allows selecting whether Qt4 or Qt5 binaries for qmake, moc and other tools will be run when invoking the binaries in $PATH. By default, the Qt5 versions are run. It is possible to change the behavior by setting the QT_SELECT environment variable to "qt4". See qtchooser(1) for more information. Installing /packages/All/qt5-core-5.14.2_2.txz Installing /packages/All/qt5-concurrent-5.14.2.txz Installing /packages/All/libICE-1.0.10,1.txz Installing /packages/All/libSM-1.2.3,1.txz Installing /packages/All/libXau-1.0.9.txz Installing /packages/All/libpthread-stubs-0.4.txz Installing /packages/All/xorgproto-2020.1.txz Installing /packages/All/libXdmcp-1.1.3.txz Installing /packages/All/libxcb-1.13.1.txz Installing /packages/All/libX11-1.6.9_1,1.txz Installing /packages/All/dbus-1.12.16.txz ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. Installing /packages/All/qt5-dbus-5.14.2.txz Installing /packages/All/libevdev-1.5.9.txz Installing /packages/All/freetype2-2.10.1.txz ===== Message from freetype2-2.10.1: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). Installing /packages/All/fontconfig-2.13.92_2,1.txz Running fc-cache to build fontconfig cache... Font directories: /usr/local/share/fonts /usr/local/lib/X11/fonts /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded Installing /packages/All/graphite2-1.3.14.txz Installing /packages/All/harfbuzz-2.6.5.txz Installing /packages/All/libudev-devd-0.4.2.txz Installing /packages/All/libmtdev-1.1.5_2.txz Installing /packages/All/py37-setuptools-44.0.0.txz Installing /packages/All/py37-evdev-0.8.1_1.txz Installing /packages/All/py37-six-1.14.0.txz Installing /packages/All/py37-pyudev-0.22.0.txz Installing /packages/All/libinput-1.12.6_1.txz Installing /packages/All/png-1.6.37.txz Installing /packages/All/xcb-util-0.4.0_2,1.txz Installing /packages/All/xcb-util-image-0.4.0_1.txz Installing /packages/All/xcb-util-keysyms-0.4.0_1.txz Installing /packages/All/xcb-util-renderutil-0.3.9_1.txz Installing /packages/All/xcb-util-wm-0.4.1_3.txz Installing /packages/All/xkeyboard-config-2.29.txz Installing /packages/All/libxkbcommon-0.10.0_2.txz ===== Message from libxkbcommon-0.10.0_2: -- If arrow keys don't work under X11 switch to legacy rules e.g., For sh/bash/ksh/zsh run and (optionally) add into ~/.profile: export XKB_DEFAULT_RULES=xorg For csh/tcsh run and (optionally) add into ~/.login: setenv XKB_DEFAULT_RULES xorg Installing /packages/All/wayland-1.16.0.txz Installing /packages/All/pciids-20200421.txz Installing /packages/All/libpciaccess-0.16.txz Installing /packages/All/libdrm-2.4.101.txz Installing /packages/All/libelf-0.8.13_3.txz Installing /packages/All/libXfixes-5.0.3_2.txz Installing /packages/All/libXdamage-1.1.5.txz Installing /packages/All/libXext-1.3.4,1.txz Installing /packages/All/libXrender-0.9.10_2.txz Installing /packages/All/libXrandr-1.5.2.txz Installing /packages/All/libxshmfence-1.3.txz Installing /packages/All/libXxf86vm-1.1.4_3.txz Installing /packages/All/mesa-libs-19.0.8.txz ===== Message from mesa-libs-19.0.8: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/jpeg-turbo-2.0.4.txz Installing /packages/All/qt5-network-5.14.2.txz Installing /packages/All/hicolor-icon-theme-0.17.txz Installing /packages/All/xprop-1.2.4.txz Installing /packages/All/libXt-1.2.0,1.txz Installing /packages/All/libXmu-1.1.3,1.txz Installing /packages/All/xset-1.2.4_3.txz Installing /packages/All/xdg-utils-1.1.3_1.txz Installing /packages/All/vulkan-headers-1.1.108.0.txz Installing /packages/All/encodings-1.0.5,1.txz Installing /packages/All/libfontenc-1.1.4.txz Installing /packages/All/mkfontscale-1.2.1.txz Installing /packages/All/font-bh-ttf-1.0.3_4.txz Installing /packages/All/font-misc-meltho-1.0.3_4.txz Installing /packages/All/font-misc-ethiopic-1.0.3_4.txz Installing /packages/All/dejavu-2.37_1.txz ===== Message from dejavu-2.37_1: -- Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Installing /packages/All/xorg-fonts-truetype-7.7_1.txz Installing /packages/All/libXi-1.7.10,1.txz Installing /packages/All/qt5-gui-5.14.2.txz Installing /packages/All/qt5-testlib-5.14.2.txz Installing /packages/All/qt5-xml-5.14.2.txz Installing /packages/All/qt5-linguisttools-5.14.2.txz Installing /packages/All/kf5-extra-cmake-modules-5.69.0_1.txz Installing /packages/All/kf5-kconfig-5.69.0.txz SUCCEEDED 00:00:38 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> libproxy-kde-0.4.15_2 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> libproxy-kde-0.4.15_2 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by libproxy-kde-0.4.15_2 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> libproxy-kde-0.4.15_2 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by libproxy-kde-0.4.15_2 for building => SHA256 Checksum OK for libproxy-libproxy-0.4.15_GH0.tar.gz. SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> libproxy-kde-0.4.15_2 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by libproxy-kde-0.4.15_2 for building ===> Extracting for libproxy-kde-0.4.15_2 => SHA256 Checksum OK for libproxy-libproxy-0.4.15_GH0.tar.gz. Extracted Memory Use: 0.69M SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for libproxy-kde-0.4.15_2 ===> Applying ports patches for libproxy-kde-0.4.15_2 ===> Cleanly applied ports patch(es) patch-CMakeLists.txt patch-bindings_CMakeLists.txt patch-bindings_perl_src_CMakeLists.txt patch-bindings_perl_t_CMakeLists.txt patch-libproxy_CMakeLists.txt patch-libproxy_cmake_pxmodule.cmk patch-libproxy_test_get-pac-test.cpp patch-utils_CMakeLists.txt SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> libproxy-kde-0.4.15_2 depends on file: /usr/local/bin/cmake - found ===> libproxy-kde-0.4.15_2 depends on package: pkgconf>=1.3.0_1 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- ===> libproxy-kde-0.4.15_2 depends on shared library: libproxy.so - found (/usr/local/lib/libproxy.so) ===> libproxy-kde-0.4.15_2 depends on shared library: libKF5ConfigCore.so - found (/usr/local/lib/libKF5ConfigCore.so) SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> libproxy-kde-0.4.15_2 depends on file: /usr/local/bin/cmake - found ===> libproxy-kde-0.4.15_2 depends on package: pkgconf>=1.3.0_1 - found ===> libproxy-kde-0.4.15_2 depends on shared library: libproxy.so - found (/usr/local/lib/libproxy.so) ===> libproxy-kde-0.4.15_2 depends on shared library: libKF5ConfigCore.so - found (/usr/local/lib/libKF5ConfigCore.so) ===> Configuring for libproxy-kde-0.4.15_2 ===> Performing out-of-source build /bin/mkdir -p /construction/net/libproxy-kde/.build CMake Warning (dev) in CMakeLists.txt: No project() command is present. The top-level CMakeLists.txt file must contain a literal, direct call to the project() command. Add a line of code such as project(ProjectName) near the top of the file, but after cmake_minimum_required(). CMake is pretending there is a "project(Project)" command on the first line. This warning is for project developers. Use -Wno-dev to suppress it. -- The C compiler identification is GNU 8.3.0 -- The CXX compiler identification is GNU 8.3.0 -- Check for working C compiler: /usr/bin/cc -- Check for working C compiler: /usr/bin/cc - works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ - works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Detecting CXX compile features -- Detecting CXX compile features - done -- Found PkgConfig: pkgconf (found version "1.6.3") -- Checking for module 'libproxy-1.0' -- Found libproxy-1.0, version 0.4.15 -- Building with bundled libmodman -- Checking for module 'webkit-1.0' -- Package 'webkit-1.0', required by 'virtual:world', not found MODULES TO BUILD: * config_envvar config_sysconfig config_gnome config_gnome3 m config_kde config_macosx config_w32reg * ignore_domain * ignore_hostname * ignore_ip network_networkmanager pacrunner_mozjs pacrunner_natus pacrunner_webkit * wpad_dns_alias -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: CMAKE_CXX_FLAGS_DEBUG CMAKE_C_FLAGS_DEBUG CMAKE_C_FLAGS_RELEASE CMAKE_EXE_LINKER_FLAGS CMAKE_SHARED_LINKER_FLAGS KDE_INSTALL_MANDIR KDE_INSTALL_USE_QT_SYS_PATHS MAN_INSTALL_DIR THREADS_HAVE_PTHREAD_ARG WITH_PYTHON WITH_VALA -- Build files have been written to: /construction/net/libproxy-kde/.build SUCCEEDED 00:00:02 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for libproxy-kde-0.4.15_2 /usr/local/bin/cmake -S/construction/net/libproxy-kde/libproxy-0.4.15 -B/construction/net/libproxy-kde/.build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/local/bin/cmake -E cmake_progress_start /construction/net/libproxy-kde/.build/CMakeFiles /construction/net/libproxy-kde/.build/CMakeFiles/progress.marks /usr/bin/make -f CMakeFiles/Makefile2 all --- libmodman/CMakeFiles/modman.dir/all --- --- libproxy/CMakeFiles/config_kde.dir/all --- --- libmodman/CMakeFiles/modman.dir/all --- /usr/bin/make -f libmodman/CMakeFiles/modman.dir/build.make libmodman/CMakeFiles/modman.dir/depend --- libproxy/CMakeFiles/config_kde.dir/all --- /usr/bin/make -f libproxy/CMakeFiles/config_kde.dir/build.make libproxy/CMakeFiles/config_kde.dir/depend --- libmodman/CMakeFiles/modman.dir/all --- --- libmodman/CMakeFiles/modman.dir/depend --- --- libproxy/CMakeFiles/config_kde.dir/all --- --- libproxy/CMakeFiles/config_kde.dir/depend --- --- libmodman/CMakeFiles/modman.dir/all --- cd /construction/net/libproxy-kde/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/net/libproxy-kde/libproxy-0.4.15 /construction/net/libproxy-kde/libproxy-0.4.15/libmodman /construction/net/libproxy-kde/.build /construction/net/libproxy-kde/.build/libmodman /construction/net/libproxy-kde/.build/libmodman/CMakeFiles/modman.dir/DependInfo.cmake --- libproxy/CMakeFiles/config_kde.dir/all --- cd /construction/net/libproxy-kde/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/net/libproxy-kde/libproxy-0.4.15 /construction/net/libproxy-kde/libproxy-0.4.15/libproxy /construction/net/libproxy-kde/.build /construction/net/libproxy-kde/.build/libproxy /construction/net/libproxy-kde/.build/libproxy/CMakeFiles/config_kde.dir/DependInfo.cmake --- libmodman/CMakeFiles/modman.dir/all --- Scanning dependencies of target modman --- libproxy/CMakeFiles/config_kde.dir/all --- Scanning dependencies of target config_kde --- libmodman/CMakeFiles/modman.dir/all --- /usr/bin/make -f libmodman/CMakeFiles/modman.dir/build.make libmodman/CMakeFiles/modman.dir/build --- libproxy/CMakeFiles/config_kde.dir/all --- /usr/bin/make -f libproxy/CMakeFiles/config_kde.dir/build.make libproxy/CMakeFiles/config_kde.dir/build --- libmodman/CMakeFiles/modman.dir/all --- --- libmodman/CMakeFiles/modman.dir/module_manager.cpp.o --- --- libproxy/CMakeFiles/config_kde.dir/all --- --- libproxy/CMakeFiles/config_kde.dir/modules/config_kde.cpp.o --- [ 20%] Building CXX object libproxy/CMakeFiles/config_kde.dir/modules/config_kde.cpp.o cd /construction/net/libproxy-kde/.build/libproxy && /usr/bin/c++ -Dconfig_kde_EXPORTS -DLIBEXECDIR=\"/usr/local/libexec\" -I/construction/net/libproxy-kde/libproxy-0.4.15 -fvisibility=hidden -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -isystem /usr/local/include -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -isystem /usr/local/include -fPIC -o CMakeFiles/config_kde.dir/modules/config_kde.cpp.o -c /construction/net/libproxy-kde/libproxy-0.4.15/libproxy/modules/config_kde.cpp --- libmodman/CMakeFiles/modman.dir/all --- [ 40%] Building CXX object libmodman/CMakeFiles/modman.dir/module_manager.cpp.o cd /construction/net/libproxy-kde/.build/libmodman && /usr/bin/c++ -I/construction/net/libproxy-kde/libproxy-0.4.15 -fvisibility=hidden -fPIC -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -isystem /usr/local/include -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -isystem /usr/local/include -o CMakeFiles/modman.dir/module_manager.cpp.o -c /construction/net/libproxy-kde/libproxy-0.4.15/libmodman/module_manager.cpp --- libproxy/CMakeFiles/config_kde.dir/all --- In file included from /construction/net/libproxy-kde/libproxy-0.4.15/libproxy/modules/../extension_config.hpp:24, from /construction/net/libproxy-kde/libproxy-0.4.15/libproxy/modules/config_kde.cpp:29: /construction/net/libproxy-kde/libproxy-0.4.15/libproxy/modules/../url.hpp:53:25: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] url(const string& url) throw (parse_error); ^~~~~ /construction/net/libproxy-kde/libproxy-0.4.15/libproxy/modules/../url.hpp:56:29: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] url& operator=(string url) throw (parse_error); ^~~~~ In file included from /construction/net/libproxy-kde/libproxy-0.4.15/libproxy/modules/config_kde.cpp:29: /construction/net/libproxy-kde/libproxy-0.4.15/libproxy/modules/../extension_config.hpp:34:54: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] virtual vector get_config(const url &dst) throw (runtime_error)=0; ^~~~~ /construction/net/libproxy-kde/libproxy-0.4.15/libproxy/modules/config_kde.cpp:69:44: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] vector get_config(const url &dst) throw (runtime_error) { ^~~~~ /construction/net/libproxy-kde/libproxy-0.4.15/libproxy/modules/config_kde.cpp:137:50: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] string command_output(const string &cmdline) throw (runtime_error) { ^~~~~ /construction/net/libproxy-kde/libproxy-0.4.15/libproxy/modules/config_kde.cpp:161:72: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] const string &kde_config_val(const string &key, const string &def) throw (runtime_error) { ^~~~~ --- libproxy/config_kde.so --- [ 60%] Linking CXX shared module config_kde.so cd /construction/net/libproxy-kde/.build/libproxy && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/config_kde.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -fvisibility=hidden -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -isystem /usr/local/include -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -isystem /usr/local/include -shared -o config_kde.so CMakeFiles/config_kde.dir/modules/config_kde.cpp.o -Wl,-z,origin,-rpath,/usr/local/lib /usr/local/lib/libproxy.so [ 80%] Built target config_kde --- libmodman/CMakeFiles/modman.dir/all --- --- libmodman/libmodman.a --- [100%] Linking CXX static library libmodman.a cd /construction/net/libproxy-kde/.build/libmodman && /usr/local/bin/cmake -P CMakeFiles/modman.dir/cmake_clean_target.cmake cd /construction/net/libproxy-kde/.build/libmodman && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/modman.dir/link.txt --verbose=1 /usr/bin/ar qc libmodman.a CMakeFiles/modman.dir/module_manager.cpp.o /usr/bin/ranlib libmodman.a [100%] Built target modman /usr/local/bin/cmake -E cmake_progress_start /construction/net/libproxy-kde/.build/CMakeFiles 0 SUCCEEDED 00:00:05 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for libproxy-kde-0.4.15_2 ===> Generating temporary packing list /usr/local/bin/cmake -S/construction/net/libproxy-kde/libproxy-0.4.15 -B/construction/net/libproxy-kde/.build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/local/bin/cmake -E cmake_progress_start /construction/net/libproxy-kde/.build/CMakeFiles /construction/net/libproxy-kde/.build/CMakeFiles/progress.marks /usr/bin/make -f CMakeFiles/Makefile2 all /usr/bin/make -f libmodman/CMakeFiles/modman.dir/build.make libmodman/CMakeFiles/modman.dir/depend cd /construction/net/libproxy-kde/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/net/libproxy-kde/libproxy-0.4.15 /construction/net/libproxy-kde/libproxy-0.4.15/libmodman /construction/net/libproxy-kde/.build /construction/net/libproxy-kde/.build/libmodman /construction/net/libproxy-kde/.build/libmodman/CMakeFiles/modman.dir/DependInfo.cmake /usr/bin/make -f libmodman/CMakeFiles/modman.dir/build.make libmodman/CMakeFiles/modman.dir/build [ 40%] Built target modman /usr/bin/make -f libproxy/CMakeFiles/config_kde.dir/build.make libproxy/CMakeFiles/config_kde.dir/depend cd /construction/net/libproxy-kde/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/net/libproxy-kde/libproxy-0.4.15 /construction/net/libproxy-kde/libproxy-0.4.15/libproxy /construction/net/libproxy-kde/.build /construction/net/libproxy-kde/.build/libproxy /construction/net/libproxy-kde/.build/libproxy/CMakeFiles/config_kde.dir/DependInfo.cmake /usr/bin/make -f libproxy/CMakeFiles/config_kde.dir/build.make libproxy/CMakeFiles/config_kde.dir/build [100%] Built target config_kde /usr/local/bin/cmake -E cmake_progress_start /construction/net/libproxy-kde/.build/CMakeFiles 0 /usr/bin/make -f CMakeFiles/Makefile2 preinstall /usr/bin/make -f libproxy/CMakeFiles/config_kde.dir/build.make libproxy/CMakeFiles/config_kde.dir/preinstall Linking CXX shared module CMakeFiles/CMakeRelink.dir/config_kde.so cd /construction/net/libproxy-kde/.build/libproxy && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/config_kde.dir/relink.txt --verbose=1 /usr/bin/c++ -fPIC -fvisibility=hidden -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -isystem /usr/local/include -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -isystem /usr/local/include -shared -o CMakeFiles/CMakeRelink.dir/config_kde.so CMakeFiles/config_kde.dir/modules/config_kde.cpp.o -Wl,-z,origin,-rpath,/usr/local/lib /usr/local/lib/libproxy.so Installing the project stripped... /usr/local/bin/cmake -DCMAKE_INSTALL_DO_STRIP=1 -P cmake_install.cmake -- Install configuration: "Release" -- Installing: /construction/net/libproxy-kde/stage/usr/local/lib/libproxy/0.4.15/modules/config_kde.so ====> Compressing man pages (compress-man) ====> Running Q/A tests (stage-qa) Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for libproxy-kde-0.4.15_2 file sizes/checksums [1]: 0% file sizes/checksums [1]: 100% packing files [1]: 0% packing files [1]: 100% packing directories [0]: 0% packing directories [0]: 100% SUCCEEDED 00:00:00 TOTAL TIME 00:00:47