------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/expat-2.2.8.txz Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/libffi-3.2.1_3.txz Installing /packages/All/ncurses-6.1.20190525.txz Installing /packages/All/readline-8.0.4.txz Installing /packages/All/gettext-runtime-0.20.2.txz Installing /packages/All/openssl-1.1.1g,1.txz Installing /packages/All/python27-2.7.18.txz ===== Message from python27-2.7.18: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter Installing /packages/All/libnghttp2-1.40.0.txz Installing /packages/All/ca_root_nss-3.52.txz ===== Message from ca_root_nss-3.52: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/curl-7.70.0.txz Installing /packages/All/libevent-2.1.11.txz ===== Message from libevent-2.1.11: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/liblz4-1.9.2_1,1.txz Installing /packages/All/protobuf-3.11.4,1.txz Installing /packages/All/cyrus-sasl-2.1.27_1.txz *** Added group `cyrus' (id 60) *** Added user `cyrus' (id 60) ===== Message from cyrus-sasl-2.1.27_1: -- You can use sasldb2 for authentication, to add users use: saslpasswd2 -c username If you want to enable SMTP AUTH with the system Sendmail, read Sendmail.README NOTE: This port has been compiled with a default pwcheck_method of auxprop. If you want to authenticate your user by /etc/passwd, PAM or LDAP, install ports/security/cyrus-sasl2-saslauthd and set sasl_pwcheck_method to saslauthd after installing the Cyrus-IMAPd 2.X port. You should also check the /usr/local/lib/sasl2/*.conf files for the correct pwcheck_method. If you want to use GSSAPI mechanism, install ports/security/cyrus-sasl2-gssapi. If you want to use SRP mechanism, install ports/security/cyrus-sasl2-srp. If you want to use LDAP auxprop plugin, install ports/security/cyrus-sasl2-ldapdb. Installing /packages/All/libedit-3.1.20191231,1.txz Installing /packages/All/uchardet-0.0.7.txz Installing /packages/All/libpaper-1.1.24.4.txz Installing /packages/All/psutils-1.17_5.txz Installing /packages/All/perl5-5.30.2.txz ===== Message from perl5-5.30.2: -- The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Installing /packages/All/groff-1.22.4_3.txz ===== Message from groff-1.22.4_3: -- In order to be able to use the html driver, you need to install the following packages: - ghostscript - netpbm Installing /packages/All/mysql57-client-5.7.30_1.txz ===== Message from mysql57-client-5.7.30_1: -- This is the mysql CLIENT without the server. for complete server and client, please install databases/mysql57-server Installing /packages/All/freetype2-2.10.1.txz ===== Message from freetype2-2.10.1: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). Installing /packages/All/png-1.6.37.txz Installing /packages/All/fontconfig-2.13.92_2,1.txz Running fc-cache to build fontconfig cache... Font directories: /usr/local/share/fonts /usr/local/lib/X11/fonts /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded Installing /packages/All/pcre-8.43_2.txz Installing /packages/All/libxml2-2.9.10.txz Installing /packages/All/libiconv-1.14_11.txz Installing /packages/All/python37-3.7.7.txz ===== Message from python37-3.7.7: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py37-gdbm databases/py-gdbm@py37 py37-sqlite3 databases/py-sqlite3@py37 py37-tkinter x11-toolkits/py-tkinter@py37 Installing /packages/All/glib-2.56.3_7,1.txz No schema files found: doing nothing. Installing /packages/All/wayland-1.16.0.txz Installing /packages/All/pciids-20200421.txz Installing /packages/All/libpciaccess-0.16.txz Installing /packages/All/libdrm-2.4.101.txz Installing /packages/All/libelf-0.8.13_3.txz Installing /packages/All/libXau-1.0.9.txz Installing /packages/All/libpthread-stubs-0.4.txz Installing /packages/All/xorgproto-2020.1.txz Installing /packages/All/libXdmcp-1.1.3.txz Installing /packages/All/libxcb-1.13.1.txz Installing /packages/All/libX11-1.6.9_1,1.txz Installing /packages/All/libXfixes-5.0.3_2.txz Installing /packages/All/libXdamage-1.1.5.txz Installing /packages/All/libXext-1.3.4,1.txz Installing /packages/All/libXrender-0.9.10_2.txz Installing /packages/All/libXrandr-1.5.2.txz Installing /packages/All/libxshmfence-1.3.txz Installing /packages/All/libXxf86vm-1.1.4_3.txz Installing /packages/All/mesa-libs-19.0.8.txz ===== Message from mesa-libs-19.0.8: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/pixman-0.40.0.txz Installing /packages/All/cairo-1.16.0,2.txz Installing /packages/All/graphite2-1.3.14.txz Installing /packages/All/harfbuzz-2.6.5.txz Installing /packages/All/fribidi-0.19.7.txz Installing /packages/All/libfontenc-1.1.4.txz Installing /packages/All/mkfontscale-1.2.1.txz Installing /packages/All/font-bh-ttf-1.0.3_4.txz Installing /packages/All/font-misc-meltho-1.0.3_4.txz Installing /packages/All/font-misc-ethiopic-1.0.3_4.txz Installing /packages/All/encodings-1.0.5,1.txz Installing /packages/All/dejavu-2.37_1.txz ===== Message from dejavu-2.37_1: -- Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Installing /packages/All/xorg-fonts-truetype-7.7_1.txz Installing /packages/All/libXft-2.3.3.txz Installing /packages/All/pango-1.42.4_3.txz Installing /packages/All/rrdtool-1.7.2_2.txz Installing /packages/All/libltdl-2.4.6.txz Installing /packages/All/giflib-5.2.1.txz Installing /packages/All/jbigkit-2.1_1.txz Installing /packages/All/jpeg-turbo-2.0.4.txz Installing /packages/All/tiff-4.1.0.txz Installing /packages/All/webp-1.1.0.txz Installing /packages/All/libgd-2.3.0,1.txz Installing /packages/All/libICE-1.0.10,1.txz Installing /packages/All/libSM-1.2.3,1.txz Installing /packages/All/libXt-1.2.0,1.txz Installing /packages/All/libXmu-1.1.3,1.txz Installing /packages/All/libXpm-3.5.13.txz Installing /packages/All/libXaw-1.0.13_3,2.txz Installing /packages/All/graphviz-2.44.0_2.txz Installing /packages/All/libargon2-20190702.txz Installing /packages/All/php72-7.2.30.txz Installing /packages/All/php72-xml-7.2.30.txz ===== Message from php72-xml-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-xml.ini Installing /packages/All/php72-zlib-7.2.30.txz ===== Message from php72-zlib-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-zlib.ini Installing /packages/All/php72-pear-1.10.6.txz Installing /packages/All/php72-pear-Net_IPv4-1.3.5.txz install ok: channel://pear.php.net/Net_IPv4-1.3.5 Installing /packages/All/php72-pear-Net_IPv6-1.3.0.b2_2.txz install ok: channel://pear.php.net/Net_IPv6-1.3.0b2 Installing /packages/All/net-snmp-5.7.3_20,1.txz ===== Message from net-snmp-5.7.3_20,1: -- **** This port installs snmpd, header files and libraries but does not start snmpd by default. If you want to auto-start snmpd and snmptrapd:, add the following to /etc/rc.conf: snmpd_enable="YES" snmpd_flags="-a" snmpd_conffile="/usr/local/share/snmp/snmpd.conf /etc/snmpd.conf" snmptrapd_enable="YES" snmptrapd_flags="-a -p /var/run/snmptrapd.pid" **** You may also specify the following make variables: NET_SNMP_SYS_CONTACT="zi@FreeBSD.org" NET_SNMP_SYS_LOCATION="USA" DEFAULT_SNMP_VERSION=3 NET_SNMP_MIB_MODULES="host smux mibII/mta_sendmail ucd-snmp/diskio" NET_SNMP_LOGFILE=/var/log/snmpd.log NET_SNMP_PERSISTENTDIR=/var/net-snmp to define default values (or to override the defaults). To avoid being prompted during the configuration process, you should (minimally) define the first two variables. (NET_SNMP_SYS_*) You may also define the following to avoid all interactive configuration: BATCH="yes" Installing /packages/All/bash-5.0.17.txz Installing /packages/All/sudo-1.8.31p1.txz Installing /packages/All/fping-4.2.txz Installing /packages/All/ipmitool-1.8.18_2.txz Installing /packages/All/libgpg-error-1.37.txz Installing /packages/All/libgcrypt-1.8.5.txz Installing /packages/All/gmp-6.2.0.txz Installing /packages/All/nettle-3.5.1_1.txz Installing /packages/All/libtasn1-4.16.0.txz Installing /packages/All/libunistring-0.9.10_1.txz Installing /packages/All/libidn2-2.3.0_1.txz Installing /packages/All/p11-kit-0.23.20.txz Installing /packages/All/tpm-emulator-0.7.4_2.txz ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. Installing /packages/All/trousers-0.3.14_2.txz ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. ===== Message from trousers-0.3.14_2: -- To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Installing /packages/All/gnutls-3.6.13.txz Installing /packages/All/libssh-0.9.4.txz Installing /packages/All/libssh2-1.8.2,3.txz Installing /packages/All/yajl-2.1.0.txz Installing /packages/All/dnsmasq-2.81_1,1.txz ===== Message from dnsmasq-2.81_1,1: -- To enable dnsmasq, edit /usr/local/etc/dnsmasq.conf and set dnsmasq_enable="YES" in /etc/rc.conf[.local] Further options and actions are documented inside /usr/local/etc/rc.d/dnsmasq SECURITY RECOMMENDATION ~~~~~~~~~~~~~~~~~~~~~~~ It is recommended to enable the wpad-related options at the end of the configuration file (you may need to copy them from the example file to yours) to fix CERT Vulnerability VU#598349. Installing /packages/All/dmidecode-3.2.txz Installing /packages/All/libepoxy-1.5.4.txz Installing /packages/All/pcre2-10.35.txz Installing /packages/All/xkeyboard-config-2.29.txz Installing /packages/All/libxkbcommon-0.10.0_2.txz ===== Message from libxkbcommon-0.10.0_2: -- If arrow keys don't work under X11 switch to legacy rules e.g., For sh/bash/ksh/zsh run and (optionally) add into ~/.profile: export XKB_DEFAULT_RULES=xorg For csh/tcsh run and (optionally) add into ~/.login: setenv XKB_DEFAULT_RULES xorg Installing /packages/All/vde2-2.3.2_4.txz ===== Message from vde2-2.3.2_4: -- ===> NOTICE: The vde2 port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/atk-2.28.1.txz Installing /packages/All/shared-mime-info-1.10_2.txz Installing /packages/All/gdk-pixbuf2-2.40.0.txz Installing /packages/All/nspr-4.25.txz Installing /packages/All/icu-67.1,1.txz Installing /packages/All/spidermonkey60-60.9.0_3.txz ===== Message from spidermonkey60-60.9.0_3: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/dbus-1.12.16.txz ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. Installing /packages/All/polkit-0.116.txz ===> Creating groups. Creating group 'polkitd' with gid '565'. ===> Creating users Creating user 'polkitd' with uid '565'. Installing /packages/All/lcms2-2.9.txz Installing /packages/All/sqlite3-3.31.1_1,1.txz Installing /packages/All/libXinerama-1.1.4_2,1.txz Installing /packages/All/libXScrnSaver-1.2.3_2.txz Installing /packages/All/argyllcms-1.9.2_5.txz Installing /packages/All/colord-1.3.5.txz ===> Creating groups. Creating group 'colord' with gid '970'. ===> Creating users Creating user 'colord' with uid '970'. Installing /packages/All/libdaemon-0.14_1.txz Installing /packages/All/dbus-glib-0.110.txz Installing /packages/All/gdbm-1.18.1_1.txz Installing /packages/All/gobject-introspection-1.56.1,1.txz Installing /packages/All/gnome_subr-1.0.txz Installing /packages/All/avahi-app-0.7_3.txz ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. Installing /packages/All/cups-2.2.13.txz ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. Installing /packages/All/libXi-1.7.10,1.txz Installing /packages/All/libXtst-1.2.3_2.txz Installing /packages/All/at-spi2-core-2.28.0.txz Installing /packages/All/at-spi2-atk-2.26.2.txz Installing /packages/All/hicolor-icon-theme-0.17.txz Installing /packages/All/libXcursor-1.2.0.txz Installing /packages/All/libXcomposite-0.4.5,1.txz Installing /packages/All/gtk-update-icon-cache-2.24.32.txz Installing /packages/All/adwaita-icon-theme-3.28.0.txz Installing /packages/All/libcroco-0.6.13.txz Installing /packages/All/libgsf-1.14.46.txz Installing /packages/All/librsvg2-2.40.21.txz Installing /packages/All/wayland-protocols-1.20.txz Installing /packages/All/gtk3-3.24.10_1.txz Installing /packages/All/vte3-0.52.2_3.txz Installing /packages/All/sdl2-2.0.10_1.txz Installing /packages/All/qemu-4.1.1_2.txz ===== Message from qemu-4.1.1_2: -- FreeBSD host notes ================== - Needs to set net.link.tap.user_open sysctl in order to use /dev/tap* networking as non-root. Don't forget to adjust device node permissions in /etc/devfs.rules. - slirp (usermode networking) is fixed now in cvs, on FreeSBIE 1.0 guests you still have to manually do: echo nameserver 10.0.2.3 >/etc/resolv.conf but i've been told that that's normal. (fixed on FreeSBIE 1.1.) And you have to wait a bit for dhclient to do its thing; traffic to address 10.0.2.2 is routed to 127.1 on the host. - Expect timer problems when guest kernel HZ is > hosts, for example time sleep 1 takes 49 seconds and booting sleeps for minutes at the acd0 probe with a FreeSBIE 1.0 guest, thats because its kernel is built with HZ=5000, and FreeBSD's default is 100... (no longer a problem with FreeSBIE 1.1.) The linux 2.6 kernel uses 1000 by default btw. (changed to 250 later, and recent linux kernels now no longer have a fixed HZ, aka `tickless kernel'...) Enabling /dev/rtc doesn't seem to help either (not included since it needs a patch to emulators/rtc.) - Update: the above problem has gotten worse with FreeBSD guests somewhere before 8.0, mainly since the kernel now usually wants double or even quadruple number of timer irqs compared to HZ if it detects an apic (and at least early versions of FreeBSD 8 had a bug that essentially halved qemu's clock rate too); the only reason you usually don't see symptoms of this with FreeBSD 8 guests is they automatically reduce their HZ to 100 when running in a VM while the default for the host kernel is still HZ=1000. Workaround: you can disable the apic clock in the guest by setting hint.apic.0.clock="0" in loader.conf(5) (or manually at the loader prompt), if that doesn't work the only things you can do is either reduce the guest's HZ to, say, 100 by setting e.g. kern.hz="100" from the loader as above (which usually is a good idea in a VM anyway and FreeBSD 8 now does by itself as mentioned), or otherwise increase the host's HZ to 2000 or even 4000 from the loader in the same way. - The -smb option (smb-export local dir to guest using the default slirp networking) needs the samba port/package installed in addition to qemu. (SAMBA knob.) - If you want to use usb devices connected to the host in the guest yot need either recent 10-current (not tested yet much) or you can use usbredir over the network (see below); also unless you are running qemu as root you then need to fix permissions for /dev/ugen* device nodes: if you are on 5.x or later (devfs) put a rule in /etc/devfs.rules, activate it in /etc/rc.conf and run /etc/rc.d/devfs restart. Example devfs.rules: [ugen_ruleset=20] add path 'ugen*' mode 660 group operator corresponding rc.conf line: devfs_system_ruleset="ugen_ruleset" - If you want to test the new (in 0.15.0) usb network redirection (USBREDIR option) see this thread by Hans de Goede redhat.com>: http://thread.gmane.org/gmane.comp.emulators.qemu/110176/focus=110183 Quote: Example usage: 1) Start usbredirserver for a usb device: sudo usbredirserver 045e:0772 2) Start qemu with usb2 support + a chardev talking to usbredirserver + a usb-redir device using this chardev: qemu -usb \ -readconfig docs/ich9-ehci-uhci.cfg \ -chardev socket,id=usbredirchardev,host=localhost,port=4000 \ -device usb-redir,chardev=usbredirchardev,id=usbredirdev ... [you would replace docs/ich9-ehci-uhci.cfg with e.g. /usr/local/share/doc/qemu/docs/ich9-ehci-uhci.cfg, but turns out ehci was broken for me here with FreeBSD guests and the previous qemu version at least, I got: FETCHENTRY: entry at 22C5484 is of type 2 which is not supported yet processing error - resetting ehci HC Assertion failed: (0), function ehci_advance_state, file /data/ports/emulators/qemu-devel/work/qemu-0.15.0/hw/usb-ehci.c, line 2045. The new qemu version works better tho.] - Still usb: since the hub is no longer attached to the uchi controller and the wakeup mechanism, resume interrupt is not implemented yet linux guests will suspend the bus, i.e. they wont see devices usb_add'ed after its (linux') uhci module got loaded. Workaround: either add devices before linux loads the module or rmmod and modprobe it afterwards. [Not sure if this still applies to the new libusb host code used on recent 10-current.] - If you get repeated `atapi_poll called!' console messages with FreeBSD guests or other weird cdrom problems then thats probably because the guest has atapicam loaded, which for reasons still to be determined has problems with qemu's now by default enabled cdrom dma. You can build the port with CDROM_DMA disabled to disable it. [Looks like this is fixed in recent FreeBSD guest versions.] - If you build qemu wihout SDL and then get crashes running it try passing it -nographic. This should probably be default in that case... - qemu's network boot roms (-boot n) have a bug when bootfiles sizes are a multiple of blksize, if this affects you (like with FreeBSD's /boot/pxeboot) you can do like cp /boot/pxeboot pxeboot-qemu && chmod +w pxeboot-qemu && echo >>pxeboot-qemu and then use pxeboot-qemu. Actually you need recent btx code (from after 7.0 was released) because of the real mode boot problem, so use at least pxeboot from there. And I just did that for the pxeboot extracted out of ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/200805/7.0-STABLE-200805-i386-bootonly.iso and placed it here: http://people.freebsd.org/~nox/qemu/pxeboot-qemu - If you use slirp (usernet, the default) and want to mount nfs into the guest and you are not running qemu as root, then mountd(8) on the exporting box needs to be run with -n in order to accept requests from ports >= 1024. - (not FreeBSD-specific:) There have been reports of qcow2 corruption with (at least) win2k guests on recent kvm (which uses similar qcow2 code than qemu now, see this thread: http://lists.gnu.org/archive/html/qemu-devel/2009-02/msg00713.html - the consensus on that thread seems to be that qcow(2) code has always been experimental and you should use raw images if you want reliability; raw is also usually faster.) You should be able to migrate existing images to raw using qemu-img(1)'s convert function; raw doesn't support advanced features like snapshots tho. [a few important qcow2 bugfixed have been committed in the meantime so this _might_ be less of an issue now; and meanwhile there also is the new qed format - I don't know how stable that one is.] - (also not FreeBSD-specific:) It is recommended to pass raw images using the new -drive syntax, specifying format=raw explicitly in order to avoid malicious guests being able to exploit the format autodetection thats otherwise getting used. (Not that you should run malicious guests anyway, but this eleminates at least a known attack vector.) - qemu now has improved physical cdrom support, but still there is at least one known problem: you need to have the guest eject the disc if you want to change it/take it out, or otherwise the guest may continue using state (like size) of the old disc. (You can also do like `change ide1-cd0 /dev/acd0' in the monitor after taking out the disc if a guest cannot eject it itself.) - The default configuration location (qemu-ifup script etc.) has been changed from /etc to PREFIX/etc (usually /usr/local/etc). Move your files accordingly. - The pcap code (-net nic... -net pcap,ifname=...) should work properly now, with only one exception: Advanced features like TSO used on the host interface can cause oversize packets which now do get truncated to avoid confusing/panicing guests but of course still will cause retransmissions. So if you see slow throughput and `pcap_send: packet size > ..., truncating' messages on qemu's tty try disabling TSO etc on the host interface at least while using pcap. - kqemu is no longer supported in qemu upstream after the 0.11 branch was created, which means also not in this version. (Linux has moved on to kvm now for qemu(-like) virtualization needs, so if you want qemu to go faster and don't want to switch to virtualbox or stick to the older emulators/qemu port which is at 0.11.1 atm and as such still supports kqemu you should help getting the FreeBSD kvm port updated and completed: http://wiki.freebsd.org/FabioChecconi/PortingLinuxKVMToFreeBSD ) Installing /packages/All/libvirt-6.3.0.txz ===== Message from libvirt-6.3.0: -- To enable libvirtd please add libvirtd_enable="YES" to /etc/rc.conf. NOTE ON CONFIGURATION: The libvirt port does not come with networking configuration enabled. The 'default' network definition is available at: /usr/local/share/examples/libvirt/networks/default.xml To enable this network please do the following: cp /usr/local/share/examples/libvirt/networks/default.xml /usr/local/etc/libvirt/qemu/networks To configure this network for autostart, execute the following: ln -s ../default.xml /usr/local/etc/libvirt/qemu/networks/autostart/default.xml If you have libvirtd already running you'll need to restart it for changes to take effect. Installing /packages/All/nagios-plugins-2.3.3,1.txz Installing /packages/All/nmap-7.80.txz Installing /packages/All/py27-setuptools-44.0.0.txz ===== Message from py27-setuptools-44.0.0: -- Only /usr/local/bin/easy_install-2.7 script has been installed since Python 2.7 is not the default Python version. -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/py27-MySQLdb-1.2.5_2.txz ===== Message from py27-MySQLdb-1.2.5_2: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/wmi-client-1.3.16_2.txz Installing /packages/All/fftw3-3.3.8_6.txz Installing /packages/All/openjpeg-2.3.1.txz Installing /packages/All/liblqr-1-0.4.2.txz ===== Message from liblqr-1-0.4.2: -- NOTE: In order to compile examples for liblqr, you will also need pngwriter port (/xports/graphics/pngwriter). Examples are located in /usr/local/share/examples/liblqr-1 Installing /packages/All/libraqm-0.6.0.txz Installing /packages/All/libraw-0.19.5.txz Installing /packages/All/libwmf-nox11-0.2.8.4_15.txz Installing /packages/All/gsfonts-8.11_8.txz Installing /packages/All/pkgconf-1.6.3,1.txz Installing /packages/All/libidn-1.35.txz Installing /packages/All/jbig2dec-0.18.txz Installing /packages/All/poppler-data-0.4.9_2.txz Installing /packages/All/ghostscript9-agpl-base-9.52_4.txz ===== Message from ghostscript9-agpl-base-9.52_4: -- This package installs a script named dvipdf that depends on dvips. If you want to use this script you need to install print/tex-dvipsk. Installing /packages/All/ImageMagick6-nox11-6.9.11.6,1.txz Installing /packages/All/mtr-nox11-0.93_1.txz Installing /packages/All/php72-ctype-7.2.30.txz ===== Message from php72-ctype-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-ctype.ini Installing /packages/All/php72-curl-7.2.30.txz ===== Message from php72-curl-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-curl.ini Installing /packages/All/php72-dom-7.2.30.txz ===== Message from php72-dom-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-dom.ini Installing /packages/All/php72-fileinfo-7.2.30.txz ===== Message from php72-fileinfo-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-fileinfo.ini Installing /packages/All/php72-filter-7.2.30.txz ===== Message from php72-filter-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-filter.ini Installing /packages/All/php72-gd-7.2.30.txz ===== Message from php72-gd-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-gd.ini Installing /packages/All/php72-hash-7.2.30.txz ===== Message from php72-hash-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-hash.ini Installing /packages/All/php72-json-7.2.30.txz ===== Message from php72-json-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-json.ini Installing /packages/All/openldap-client-2.4.50.txz ===== Message from openldap-client-2.4.50: -- The OpenLDAP client package has been successfully installed. Edit /usr/local/etc/openldap/ldap.conf to change the system-wide client defaults. Try `man ldap.conf' and visit the OpenLDAP FAQ-O-Matic at http://www.OpenLDAP.org/faq/index.cgi?file=3 for more information. Installing /packages/All/php72-ldap-7.2.30.txz ===== Message from php72-ldap-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-ldap.ini Installing /packages/All/oniguruma-6.9.4.txz Installing /packages/All/php72-mbstring-7.2.30.txz ===== Message from php72-mbstring-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-mbstring.ini Installing /packages/All/php72-mysqli-7.2.30.txz ===== Message from php72-mysqli-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-mysqli.ini Installing /packages/All/php72-openssl-7.2.30.txz ===== Message from php72-openssl-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-openssl.ini Installing /packages/All/php72-pdo-7.2.30.txz ===== Message from php72-pdo-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-pdo.ini Installing /packages/All/php72-pdo_mysql-7.2.30.txz ===== Message from php72-pdo_mysql-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-30-pdo_mysql.ini Installing /packages/All/php72-phar-7.2.30.txz ===== Message from php72-phar-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-30-phar.ini Installing /packages/All/php72-posix-7.2.30.txz ===== Message from php72-posix-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-posix.ini Installing /packages/All/php72-session-7.2.30.txz ===== Message from php72-session-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-18-session.ini Installing /packages/All/php72-simplexml-7.2.30.txz ===== Message from php72-simplexml-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-simplexml.ini Installing /packages/All/php72-snmp-7.2.30.txz ===== Message from php72-snmp-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-snmp.ini Installing /packages/All/php72-sockets-7.2.30.txz ===== Message from php72-sockets-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-sockets.ini Installing /packages/All/php72-tokenizer-7.2.30.txz ===== Message from php72-tokenizer-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-tokenizer.ini Installing /packages/All/php72-xmlwriter-7.2.30.txz ===== Message from php72-xmlwriter-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-xmlwriter.ini Installing /packages/All/libzip-1.5.2.txz Installing /packages/All/php72-zip-7.2.30.txz ===== Message from php72-zip-7.2.30: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-zip.ini SUCCEEDED 00:02:45 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- /!\ librenms-1.63_2,1: Makefile warnings, please consider fixing /!\ Using USE_PHP alone is deprecated, please use USES=php lang/python27 reached End of Life and will be removed on 2020-12-31, consider converting to a modern version of python ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. SUCCEEDED 00:00:10 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> librenms-1.63_2,1 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- /!\ librenms-1.63_2,1: Makefile warnings, please consider fixing /!\ Using USE_PHP alone is deprecated, please use USES=php lang/python27 reached End of Life and will be removed on 2020-12-31, consider converting to a modern version of python ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. ===> librenms-1.63_2,1 depends on file: /usr/local/sbin/pkg - found => librenms-vendor-1.63.tar.gz doesn't seem to exist in /distfiles/. => Attempting to fetch http://distcache.FreeBSD.org/local-distfiles/dvl/librenms-vendor-1.63.tar.gz librenms-vendor-1.63.tar.gz 0% of 26 MB 0 Bps librenms-vendor-1.63.tar.gz 1% of 26 MB 603 kBps librenms-vendor-1.63.tar.gz 9% of 26 MB 2387 kBps librenms-vendor-1.63.tar.gz 27% of 26 MB 4793 kBps 07s librenms-vendor-1.63.tar.gz 56% of 26 MB 7652 kBps 03s librenms-vendor-1.63.tar.gz 93% of 26 MB 9 MBps 05s librenms-vendor-1.63.tar.gz 26 MB 5166 kBps 05s => librenms-librenms-1.63_GH0.tar.gz doesn't seem to exist in /distfiles/. => Attempting to fetch https://codeload.github.com/librenms/librenms/tar.gz/1.63?dummy=/librenms-librenms-1.63_GH0.tar.gz fetch: https://codeload.github.com/librenms/librenms/tar.gz/1.63?dummy=/librenms-librenms-1.63_GH0.tar.gz: size unknown fetch: https://codeload.github.com/librenms/librenms/tar.gz/1.63?dummy=/librenms-librenms-1.63_GH0.tar.gz: size of remote file is not known librenms-librenms-1.63_GH0.tar.gz 0 B 0 Bps librenms-librenms-1.63_GH0.tar.gz 880 kB 1196 kBps librenms-librenms-1.63_GH0.tar.gz 4448 kB 3434 kBps librenms-librenms-1.63_GH0.tar.gz 10 MB 6232 kBps librenms-librenms-1.63_GH0.tar.gz 18 MB 8680 kBps librenms-librenms-1.63_GH0.tar.gz 25 MB 7321 kBps librenms-librenms-1.63_GH0.tar.gz 30 MB 4406 kBps librenms-librenms-1.63_GH0.tar.gz 35 MB 5961 kBps librenms-librenms-1.63_GH0.tar.gz 38 MB 2926 kBps librenms-librenms-1.63_GH0.tar.gz 41 MB 5056 kBps 08s ===> Fetching all distfiles required by librenms-1.63_2,1 for building SUCCEEDED 00:00:25 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- /!\ librenms-1.63_2,1: Makefile warnings, please consider fixing /!\ Using USE_PHP alone is deprecated, please use USES=php lang/python27 reached End of Life and will be removed on 2020-12-31, consider converting to a modern version of python ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. ===> librenms-1.63_2,1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by librenms-1.63_2,1 for building => SHA256 Checksum OK for librenms-vendor-1.63.tar.gz. => SHA256 Checksum OK for librenms-librenms-1.63_GH0.tar.gz. SUCCEEDED 00:00:13 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- /!\ librenms-1.63_2,1: Makefile warnings, please consider fixing /!\ Using USE_PHP alone is deprecated, please use USES=php lang/python27 reached End of Life and will be removed on 2020-12-31, consider converting to a modern version of python ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. ===> librenms-1.63_2,1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by librenms-1.63_2,1 for building ===> Extracting for librenms-1.63_2,1 => SHA256 Checksum OK for librenms-vendor-1.63.tar.gz. => SHA256 Checksum OK for librenms-librenms-1.63_GH0.tar.gz. Extracted Memory Use: 487.36M SUCCEEDED 00:00:26 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for librenms-1.63_2,1 ===> Applying ports patches for librenms-1.63_2,1 ===> Cleanly applied ports patch(es) patch-.env.example patch-LibreNMS_Util_FileLock.php patch-LibreNMS_Validations_Programs.php patch-LibreNMS_Validations_User.php patch-config.php.default patch-html_install.php patch-includes_common.php patch-poller-wrapper.py SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> librenms-1.63_2,1 depends on file: /usr/local/bin/python2.7 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- ===> librenms-1.63_2,1 depends on shared library: libmysqlclient.so.20 - found (/usr/local/lib/mysql/libmysqlclient.so.20) SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> librenms-1.63_2,1 depends on file: /usr/local/bin/python2.7 - found ===> librenms-1.63_2,1 depends on shared library: libmysqlclient.so.20 - found (/usr/local/lib/mysql/libmysqlclient.so.20) ===> Configuring for librenms-1.63_2,1 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- ===> librenms-1.63_2,1 depends on executable: rrdtool - found ===> librenms-1.63_2,1 depends on executable: dot - found ===> librenms-1.63_2,1 depends on file: /usr/local/share/pear/Net/IPv4.php - found ===> librenms-1.63_2,1 depends on file: /usr/local/share/pear/Net/IPv6.php - found ===> librenms-1.63_2,1 depends on executable: snmpget - found ===> librenms-1.63_2,1 depends on executable: bash - found ===> librenms-1.63_2,1 depends on executable: sudo - found ===> librenms-1.63_2,1 depends on executable: fping - found ===> librenms-1.63_2,1 depends on executable: ipmitool - found ===> librenms-1.63_2,1 depends on executable: virsh - found ===> librenms-1.63_2,1 depends on file: /usr/local/libexec/nagios/check_nagios - found ===> librenms-1.63_2,1 depends on executable: nmap - found ===> librenms-1.63_2,1 depends on package: py27-MySQLdb>=1.2.3 - found ===> librenms-1.63_2,1 depends on executable: wmic - found ===> librenms-1.63_2,1 depends on executable: Magick-config - found ===> librenms-1.63_2,1 depends on executable: mtr - found ===> librenms-1.63_2,1 depends on file: /usr/local/bin/python2.7 - found ===> librenms-1.63_2,1 depends on file: /usr/local/include/php/main/php.h - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/ctype.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/curl.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/dom.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/fileinfo.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/filter.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/gd.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/hash.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/json.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/ldap.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/mbstring.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/mysqli.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/openssl.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/pdo.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/pdo_mysql.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/phar.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/posix.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/session.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/simplexml.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/snmp.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/sockets.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/tokenizer.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/xml.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/xmlwriter.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/zip.so - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for librenms-1.63_2,1 ===> librenms-1.63_2,1 depends on executable: rrdtool - found ===> librenms-1.63_2,1 depends on executable: dot - found ===> librenms-1.63_2,1 depends on file: /usr/local/share/pear/Net/IPv4.php - found ===> librenms-1.63_2,1 depends on file: /usr/local/share/pear/Net/IPv6.php - found ===> librenms-1.63_2,1 depends on executable: snmpget - found ===> librenms-1.63_2,1 depends on executable: bash - found ===> librenms-1.63_2,1 depends on executable: sudo - found ===> librenms-1.63_2,1 depends on executable: fping - found ===> librenms-1.63_2,1 depends on executable: ipmitool - found ===> librenms-1.63_2,1 depends on executable: virsh - found ===> librenms-1.63_2,1 depends on file: /usr/local/libexec/nagios/check_nagios - found ===> librenms-1.63_2,1 depends on executable: nmap - found ===> librenms-1.63_2,1 depends on package: py27-MySQLdb>=1.2.3 - found ===> librenms-1.63_2,1 depends on executable: wmic - found ===> librenms-1.63_2,1 depends on executable: Magick-config - found ===> librenms-1.63_2,1 depends on executable: mtr - found ===> librenms-1.63_2,1 depends on file: /usr/local/bin/python2.7 - found ===> librenms-1.63_2,1 depends on file: /usr/local/include/php/main/php.h - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/ctype.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/curl.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/dom.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/fileinfo.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/filter.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/gd.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/hash.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/json.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/ldap.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/mbstring.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/mysqli.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/openssl.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/pdo.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/pdo_mysql.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/phar.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/posix.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/session.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/simplexml.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/snmp.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/sockets.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/tokenizer.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/xml.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/xmlwriter.so - found ===> librenms-1.63_2,1 depends on file: /usr/local/lib/php/20170718/zip.so - found ===> Generating temporary packing list ===> Creating users /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/LibreNMS (cd /construction/net-mgmt/librenms/librenms-1.63/LibreNMS && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/LibreNMS) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/app (cd /construction/net-mgmt/librenms/librenms-1.63/app && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/app) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/bootstrap (cd /construction/net-mgmt/librenms/librenms-1.63/bootstrap && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/bootstrap) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/config (cd /construction/net-mgmt/librenms/librenms-1.63/config && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/config) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/contrib (cd /construction/net-mgmt/librenms/librenms-1.63/contrib && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/contrib) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/database (cd /construction/net-mgmt/librenms/librenms-1.63/database && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/database) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/doc (cd /construction/net-mgmt/librenms/librenms-1.63/doc && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/doc) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/html (cd /construction/net-mgmt/librenms/librenms-1.63/html && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/html) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/includes (cd /construction/net-mgmt/librenms/librenms-1.63/includes && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/includes) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/licenses (cd /construction/net-mgmt/librenms/librenms-1.63/licenses && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/licenses) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/logs (cd /construction/net-mgmt/librenms/librenms-1.63/logs && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/logs) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/mibs (cd /construction/net-mgmt/librenms/librenms-1.63/mibs && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/mibs) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/misc (cd /construction/net-mgmt/librenms/librenms-1.63/misc && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/misc) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/resources (cd /construction/net-mgmt/librenms/librenms-1.63/resources && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/resources) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/routes (cd /construction/net-mgmt/librenms/librenms-1.63/routes && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/routes) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/scripts (cd /construction/net-mgmt/librenms/librenms-1.63/scripts && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/scripts) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/sql-schema (cd /construction/net-mgmt/librenms/librenms-1.63/sql-schema && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/sql-schema) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/storage (cd /construction/net-mgmt/librenms/librenms-1.63/storage && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/storage) /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/tests (cd /construction/net-mgmt/librenms/librenms-1.63/tests && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/tests) install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/addhost.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/adduser.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/alerts.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/artisan /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/billing-calculate.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/build-base.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/build.sql /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/check-services.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/composer.json /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/composer.lock /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/config.php.default /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/config_to_json.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/cronic /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/daily.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/delhost.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/discovery-wrapper.py /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/discovery.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/dist-pollers.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/irc.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/librenms-service.py /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/mkdocs.yml /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/pbin.sh /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/phpunit.xml /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/ping.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/poll-billing.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/poller.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/poller-service.py /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/poller-wrapper.py /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/readmegen.yml /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/renamehost.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/services-wrapper.py /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/snmp-scan.py /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/snmptrap.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/syslog.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/validate.php /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 555 /construction/net-mgmt/librenms/librenms-1.63/daily.sh /construction/net-mgmt/librenms/stage//usr/local/www/librenms install -m 555 /construction/net-mgmt/librenms/librenms-1.63/lnms /construction/net-mgmt/librenms/stage//usr/local/www/librenms /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/www/librenms/vendor (cd /construction/net-mgmt/librenms/librenms-vendor-1.63 && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/www/librenms/vendor) /usr/bin/find /construction/net-mgmt/librenms/stage//usr/local/www/librenms/scripts -type f -exec /bin/chmod +x {} \; /usr/bin/find /construction/net-mgmt/librenms/stage//usr/local/www/librenms -type f -name '*.py' -or -type f -name '*.php' -exec /bin/chmod +x {} \; /bin/mkdir -p /construction/net-mgmt/librenms/stage/var/log/librenms /bin/mkdir -p /construction/net-mgmt/librenms/stage/var/db/librenms /bin/mkdir -p /construction/net-mgmt/librenms/stage/var/run/librenms /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/share/doc/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/AUTHORS.md /construction/net-mgmt/librenms/stage//usr/local/share/doc/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/CHANGELOG.md /construction/net-mgmt/librenms/stage//usr/local/share/doc/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/CONTRIBUTING.md /construction/net-mgmt/librenms/stage//usr/local/share/doc/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/LICENSE.txt /construction/net-mgmt/librenms/stage//usr/local/share/doc/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/README.md /construction/net-mgmt/librenms/stage//usr/local/share/doc/librenms cd /construction/net-mgmt/librenms/librenms-1.63/doc && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE . /construction/net-mgmt/librenms/stage//usr/local/share/doc/librenms /bin/mkdir -p /construction/net-mgmt/librenms/stage//usr/local/share/examples/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/snmp.conf.example /construction/net-mgmt/librenms/stage//usr/local/share/examples/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/snmpd.conf.example /construction/net-mgmt/librenms/stage//usr/local/share/examples/librenms install -m 0644 /construction/net-mgmt/librenms/librenms-1.63/.env.example /construction/net-mgmt/librenms/stage//usr/local/www/librenms ====> Compressing man pages (compress-man) ===> Staging rc.d startup script(s) ====> Running Q/A tests (stage-qa) Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks Warning: Possible REINPLACE_CMD issues sed failed: file content unchanged from backup: config.php.default sed failed: file content unchanged from backup: config.php.default sed failed: file content unchanged from backup: poller-wrapper.py sed failed: file content unchanged from backup: poller.php sed failed: file content unchanged from backup: html/install.php SUCCEEDED 00:05:32 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for librenms-1.63_2,1 file sizes/checksums [18311]: 0% file sizes/checksums [18311]: 0% file sizes/checksums [18311]: 1% file sizes/checksums [18311]: 2% file sizes/checksums [18311]: 3% file sizes/checksums [18311]: 4% file sizes/checksums [18311]: 5% file sizes/checksums [18311]: 6% file sizes/checksums [18311]: 7% file sizes/checksums [18311]: 8% file sizes/checksums [18311]: 9% file sizes/checksums [18311]: 10% file sizes/checksums [18311]: 11% file sizes/checksums [18311]: 12% file sizes/checksums [18311]: 13% file sizes/checksums [18311]: 14% file sizes/checksums [18311]: 15% file sizes/checksums [18311]: 16% file sizes/checksums [18311]: 17% file sizes/checksums [18311]: 18% file sizes/checksums [18311]: 19% file sizes/checksums [18311]: 20% file sizes/checksums [18311]: 21% file sizes/checksums [18311]: 22% file sizes/checksums [18311]: 23% file sizes/checksums [18311]: 24% file sizes/checksums [18311]: 25% file sizes/checksums [18311]: 26% file sizes/checksums [18311]: 27% file sizes/checksums [18311]: 28% file sizes/checksums [18311]: 29% file sizes/checksums [18311]: 30% file sizes/checksums [18311]: 31% file sizes/checksums [18311]: 32% file sizes/checksums [18311]: 33% file sizes/checksums [18311]: 34% file sizes/checksums [18311]: 35% file sizes/checksums [18311]: 36% file sizes/checksums [18311]: 37% file sizes/checksums [18311]: 38% file sizes/checksums [18311]: 39% file sizes/checksums [18311]: 40% file sizes/checksums [18311]: 41% file sizes/checksums [18311]: 42% file sizes/checksums [18311]: 43% file sizes/checksums [18311]: 44% file sizes/checksums [18311]: 45% file sizes/checksums [18311]: 46% file sizes/checksums [18311]: 47% file sizes/checksums [18311]: 48% file sizes/checksums [18311]: 49% file sizes/checksums [18311]: 50% file sizes/checksums [18311]: 51% file sizes/checksums [18311]: 52% file sizes/checksums [18311]: 53% file sizes/checksums [18311]: 54% file sizes/checksums [18311]: 55% file sizes/checksums [18311]: 56% file sizes/checksums [18311]: 57% file sizes/checksums [18311]: 58% file sizes/checksums [18311]: 59% file sizes/checksums [18311]: 60% file sizes/checksums [18311]: 61% file sizes/checksums [18311]: 62% file sizes/checksums [18311]: 63% file sizes/checksums [18311]: 64% file sizes/checksums [18311]: 65% file sizes/checksums [18311]: 66% file sizes/checksums [18311]: 67% file sizes/checksums [18311]: 68% file sizes/checksums [18311]: 69% file sizes/checksums [18311]: 70% file sizes/checksums [18311]: 71% file sizes/checksums [18311]: 72% file sizes/checksums [18311]: 73% file sizes/checksums [18311]: 74% file sizes/checksums [18311]: 75% file sizes/checksums [18311]: 76% file sizes/checksums [18311]: 77% file sizes/checksums [18311]: 78% file sizes/checksums [18311]: 79% file sizes/checksums [18311]: 80% file sizes/checksums [18311]: 81% file sizes/checksums [18311]: 82% file sizes/checksums [18311]: 83% file sizes/checksums [18311]: 84% file sizes/checksums [18311]: 85% file sizes/checksums [18311]: 86% file sizes/checksums [18311]: 87% file sizes/checksums [18311]: 88% file sizes/checksums [18311]: 89% file sizes/checksums [18311]: 90% file sizes/checksums [18311]: 91% file sizes/checksums [18311]: 92% file sizes/checksums [18311]: 93% file sizes/checksums [18311]: 94% file sizes/checksums [18311]: 95% file sizes/checksums [18311]: 96% file sizes/checksums [18311]: 97% file sizes/checksums [18311]: 98% file sizes/checksums [18311]: 99% file sizes/checksums [18311]: 100% packing files [18311]: 0% packing files [18311]: 0% packing files [18311]: 1% packing files [18311]: 2% packing files [18311]: 3% packing files [18311]: 4% packing files [18311]: 5% packing files [18311]: 6% packing files [18311]: 7% packing files [18311]: 8% packing files [18311]: 9% packing files [18311]: 10% packing files [18311]: 11% packing files [18311]: 12% packing files [18311]: 13% packing files [18311]: 14% packing files [18311]: 15% packing files [18311]: 16% packing files [18311]: 17% packing files [18311]: 18% packing files [18311]: 19% packing files [18311]: 20% packing files [18311]: 21% packing files [18311]: 22% packing files [18311]: 23% packing files [18311]: 24% packing files [18311]: 25% packing files [18311]: 26% packing files [18311]: 27% packing files [18311]: 28% packing files [18311]: 29% packing files [18311]: 30% packing files [18311]: 31% packing files [18311]: 32% packing files [18311]: 33% packing files [18311]: 34% packing files [18311]: 35% packing files [18311]: 36% packing files [18311]: 37% packing files [18311]: 38% packing files [18311]: 39% packing files [18311]: 40% packing files [18311]: 41% packing files [18311]: 42% packing files [18311]: 43% packing files [18311]: 44% packing files [18311]: 45% packing files [18311]: 46% packing files [18311]: 47% packing files [18311]: 48% packing files [18311]: 49% packing files [18311]: 50% packing files [18311]: 51% packing files [18311]: 52% packing files [18311]: 53% packing files [18311]: 54% packing files [18311]: 55% packing files [18311]: 56% packing files [18311]: 57% packing files [18311]: 58% packing files [18311]: 59% packing files [18311]: 60% packing files [18311]: 61% packing files [18311]: 62% packing files [18311]: 63% packing files [18311]: 64% packing files [18311]: 65% packing files [18311]: 66% packing files [18311]: 67% packing files [18311]: 68% packing files [18311]: 69% packing files [18311]: 70% packing files [18311]: 71% packing files [18311]: 72% packing files [18311]: 73% packing files [18311]: 74% packing files [18311]: 75% packing files [18311]: 76% packing files [18311]: 77% packing files [18311]: 78% packing files [18311]: 79% packing files [18311]: 80% packing files [18311]: 81% packing files [18311]: 82% packing files [18311]: 83% packing files [18311]: 84% packing files [18311]: 85% packing files [18311]: 86% packing files [18311]: 87% packing files [18311]: 88% packing files [18311]: 89% packing files [18311]: 90% packing files [18311]: 91% packing files [18311]: 92% packing files [18311]: 93% packing files [18311]: 94% packing files [18311]: 95% packing files [18311]: 96% packing files [18311]: 97% packing files [18311]: 98% packing files [18311]: 99% packing files [18311]: 100% packing directories [29]: 0% packing directories [29]: 100% SUCCEEDED 00:07:07 TOTAL TIME 00:16:42