------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/expat-2.2.8.txz Installing /packages/All/libICE-1.0.10,1.txz Installing /packages/All/libSM-1.2.3,1.txz Installing /packages/All/libXau-1.0.9.txz Installing /packages/All/libxml2-2.9.10.txz Installing /packages/All/libpthread-stubs-0.4.txz Installing /packages/All/xorgproto-2020.1.txz Installing /packages/All/libXdmcp-1.1.3.txz Installing /packages/All/libxcb-1.13.1.txz Installing /packages/All/libX11-1.6.9_1,1.txz Installing /packages/All/dbus-1.12.16.txz ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. Installing /packages/All/giflib-5.2.1.txz Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gmp-6.2.0.txz Installing /packages/All/nettle-3.5.1_1.txz Installing /packages/All/libtasn1-4.16.0.txz Installing /packages/All/libunistring-0.9.10_1.txz Installing /packages/All/libidn2-2.3.0_1.txz Installing /packages/All/libffi-3.2.1_3.txz Installing /packages/All/ca_root_nss-3.52.txz ===== Message from ca_root_nss-3.52: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/p11-kit-0.23.20.txz Installing /packages/All/tpm-emulator-0.7.4_2.txz ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. Installing /packages/All/openssl-1.1.1g,1.txz Installing /packages/All/trousers-0.3.14_2.txz ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. ===== Message from trousers-0.3.14_2: -- To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Installing /packages/All/gettext-runtime-0.20.2.txz Installing /packages/All/gnutls-3.6.13.txz Installing /packages/All/jbigkit-2.1_1.txz Installing /packages/All/jpeg-turbo-2.0.4.txz Installing /packages/All/tiff-4.1.0.txz Installing /packages/All/lcms2-2.9.txz Installing /packages/All/freetype2-2.10.1.txz ===== Message from freetype2-2.10.1: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). Installing /packages/All/fontconfig-2.13.92_2,1.txz Running fc-cache to build fontconfig cache... Font directories: /usr/local/share/fonts /usr/local/lib/X11/fonts /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded Installing /packages/All/fribidi-0.19.7.txz Installing /packages/All/png-1.6.37.txz Installing /packages/All/webp-1.1.0.txz Installing /packages/All/libgd-2.3.0,1.txz Installing /packages/All/libXext-1.3.4,1.txz Installing /packages/All/libXt-1.2.0,1.txz Installing /packages/All/libXmu-1.1.3,1.txz Installing /packages/All/libXpm-3.5.13.txz Installing /packages/All/libXaw-1.0.13_3,2.txz Installing /packages/All/libotf-0.9.16.txz Installing /packages/All/m17n-db-1.8.0.txz Installing /packages/All/libXrender-0.9.10_2.txz Installing /packages/All/libXft-2.3.3.txz Installing /packages/All/m17n-lib-1.8.0_2.txz Installing /packages/All/libltdl-2.4.6.txz Installing /packages/All/fftw3-3.3.8_6.txz Installing /packages/All/openjpeg-2.3.1.txz Installing /packages/All/pcre-8.43_2.txz Installing /packages/All/libiconv-1.14_11.txz Installing /packages/All/ncurses-6.1.20190525.txz Installing /packages/All/readline-8.0.4.txz Installing /packages/All/python37-3.7.7.txz ===== Message from python37-3.7.7: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py37-gdbm databases/py-gdbm@py37 py37-sqlite3 databases/py-sqlite3@py37 py37-tkinter x11-toolkits/py-tkinter@py37 Installing /packages/All/glib-2.56.3_7,1.txz No schema files found: doing nothing. Installing /packages/All/liblqr-1-0.4.2.txz ===== Message from liblqr-1-0.4.2: -- NOTE: In order to compile examples for liblqr, you will also need pngwriter port (/xports/graphics/pngwriter). Examples are located in /usr/local/share/examples/liblqr-1 Installing /packages/All/graphite2-1.3.14.txz Installing /packages/All/harfbuzz-2.6.5.txz Installing /packages/All/libraqm-0.6.0.txz Installing /packages/All/libraw-0.19.5.txz Installing /packages/All/libwmf-0.2.8.4_15.txz Installing /packages/All/wayland-1.16.0.txz Installing /packages/All/pciids-20200421.txz Installing /packages/All/libpciaccess-0.16.txz Installing /packages/All/libdrm-2.4.101.txz Installing /packages/All/libelf-0.8.13_3.txz Installing /packages/All/libXfixes-5.0.3_2.txz Installing /packages/All/libXdamage-1.1.5.txz Installing /packages/All/libXrandr-1.5.2.txz Installing /packages/All/libxshmfence-1.3.txz Installing /packages/All/libXxf86vm-1.1.4_3.txz Installing /packages/All/mesa-libs-19.0.8.txz ===== Message from mesa-libs-19.0.8: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/pixman-0.40.0.txz Installing /packages/All/cairo-1.16.0,2.txz Installing /packages/All/shared-mime-info-1.10_2.txz Installing /packages/All/gdk-pixbuf2-2.40.0.txz Installing /packages/All/libgsf-1.14.46.txz Installing /packages/All/libcroco-0.6.13.txz Installing /packages/All/libfontenc-1.1.4.txz Installing /packages/All/mkfontscale-1.2.1.txz Installing /packages/All/font-bh-ttf-1.0.3_4.txz Installing /packages/All/font-misc-meltho-1.0.3_4.txz Installing /packages/All/font-misc-ethiopic-1.0.3_4.txz Installing /packages/All/encodings-1.0.5,1.txz Installing /packages/All/dejavu-2.37_1.txz ===== Message from dejavu-2.37_1: -- Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Installing /packages/All/xorg-fonts-truetype-7.7_1.txz Installing /packages/All/pango-1.42.4_3.txz Installing /packages/All/librsvg2-2.40.21.txz Installing /packages/All/gsfonts-8.11_8.txz Installing /packages/All/pkgconf-1.6.3,1.txz Installing /packages/All/libidn-1.35.txz Installing /packages/All/jbig2dec-0.18.txz Installing /packages/All/libpaper-1.1.24.4.txz Installing /packages/All/libdaemon-0.14_1.txz Installing /packages/All/dbus-glib-0.110.txz Installing /packages/All/gdbm-1.18.1_1.txz Installing /packages/All/gobject-introspection-1.56.1,1.txz Installing /packages/All/gnome_subr-1.0.txz Installing /packages/All/avahi-app-0.7_3.txz ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. Installing /packages/All/cups-2.2.13.txz ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. Installing /packages/All/poppler-data-0.4.9_2.txz Installing /packages/All/ghostscript9-agpl-base-9.52_4.txz ===== Message from ghostscript9-agpl-base-9.52_4: -- This package installs a script named dvipdf that depends on dvips. If you want to use this script you need to install print/tex-dvipsk. Installing /packages/All/ghostscript9-agpl-x11-9.52.txz Installing /packages/All/perl5-5.30.2.txz ===== Message from perl5-5.30.2: -- The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Installing /packages/All/ImageMagick7-7.0.10.6.txz Installing /packages/All/boehm-gc-8.0.4_1.txz Installing /packages/All/boehm-gc-threaded-8.0.4_1.txz Installing /packages/All/mailutils-3.9.txz Installing /packages/All/atk-2.28.1.txz Installing /packages/All/nspr-4.25.txz Installing /packages/All/icu-67.1,1.txz Installing /packages/All/spidermonkey60-60.9.0_3.txz ===== Message from spidermonkey60-60.9.0_3: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/polkit-0.116.txz ===> Creating groups. Creating group 'polkitd' with gid '565'. ===> Creating users Creating user 'polkitd' with uid '565'. Installing /packages/All/dconf-0.28.0.txz Installing /packages/All/hicolor-icon-theme-0.17.txz Installing /packages/All/libXinerama-1.1.4_2,1.txz Installing /packages/All/libXi-1.7.10,1.txz Installing /packages/All/libXcursor-1.2.0.txz Installing /packages/All/libXcomposite-0.4.5,1.txz Installing /packages/All/gtk-update-icon-cache-2.24.32.txz Installing /packages/All/gtk2-2.24.32.txz Installing /packages/All/libIDL-0.8.14_4.txz Installing /packages/All/ORBit2-2.14.19_2.txz Installing /packages/All/gconf2-3.2.6_5.txz Installing /packages/All/libepoxy-1.5.4.txz Installing /packages/All/sqlite3-3.31.1_1,1.txz Installing /packages/All/libXScrnSaver-1.2.3_2.txz Installing /packages/All/argyllcms-1.9.2_5.txz Installing /packages/All/colord-1.3.5.txz ===> Creating groups. Creating group 'colord' with gid '970'. ===> Creating users Creating user 'colord' with uid '970'. Installing /packages/All/xkeyboard-config-2.29.txz Installing /packages/All/libxkbcommon-0.10.0_2.txz ===== Message from libxkbcommon-0.10.0_2: -- If arrow keys don't work under X11 switch to legacy rules e.g., For sh/bash/ksh/zsh run and (optionally) add into ~/.profile: export XKB_DEFAULT_RULES=xorg For csh/tcsh run and (optionally) add into ~/.login: setenv XKB_DEFAULT_RULES xorg Installing /packages/All/libXtst-1.2.3_2.txz Installing /packages/All/at-spi2-core-2.28.0.txz Installing /packages/All/at-spi2-atk-2.26.2.txz Installing /packages/All/adwaita-icon-theme-3.28.0.txz Installing /packages/All/wayland-protocols-1.20.txz Installing /packages/All/gtk3-3.24.10_1.txz Installing /packages/All/coreutils-8.31.txz Installing /packages/All/desktop-file-utils-0.24.txz Installing /packages/All/emacs-26.3_4,3.txz Installing /packages/All/gmake-4.3.txz Installing /packages/All/p5-Locale-libintl-1.31.txz Installing /packages/All/p5-Text-Unidecode-1.30.txz Installing /packages/All/p5-Unicode-EastAsianWidth-12.0.txz Installing /packages/All/texinfo-6.7_2,1.txz Installing /packages/All/libnghttp2-1.40.0.txz Installing /packages/All/curl-7.70.0.txz Installing /packages/All/pcre2-10.35.txz Installing /packages/All/tcl86-8.6.10.txz Installing /packages/All/tk86-8.6.10_1.txz Installing /packages/All/mpfr-4.0.2.txz Installing /packages/All/mpc-1.1.0_2.txz UNFLAVORED devel/binutils -> use devel/binutils@native Installing /packages/All/binutils-2.33.1_2,1.txz Installing /packages/All/gcc8-8.4.0.txz ===== Message from gcc8-8.4.0: -- To ensure binaries built with this toolchain find appropriate versions of the necessary run-time libraries, you may want to link using -Wl,-rpath=/usr/local/lib/gcc8 For ports leveraging USE_GCC, USES=compiler, or USES=fortran this happens transparently. Installing /packages/All/R-4.0.0_1.txz UNFLAVORED devel/binutils -> use devel/binutils@native SUCCEEDED 00:01:29 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> ess-emacs26-18.10.2_2 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> ess-emacs26-18.10.2_2 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by ess-emacs26-18.10.2_2 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> ess-emacs26-18.10.2_2 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by ess-emacs26-18.10.2_2 for building => SHA256 Checksum OK for ess-18.10.2.tgz. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> ess-emacs26-18.10.2_2 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by ess-emacs26-18.10.2_2 for building ===> Extracting for ess-emacs26-18.10.2_2 => SHA256 Checksum OK for ess-18.10.2.tgz. Extracted Memory Use: 6.30M SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for ess-emacs26-18.10.2_2 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> ess-emacs26-18.10.2_2 depends on file: /usr/local/bin/emacs-26.3 - found ===> ess-emacs26-18.10.2_2 depends on package: gmake>=4.3 - found ===> ess-emacs26-18.10.2_2 depends on file: /usr/local/bin/makeinfo - found ===> ess-emacs26-18.10.2_2 depends on package: perl5>=5.30.r1<5.31 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> ess-emacs26-18.10.2_2 depends on file: /usr/local/bin/emacs-26.3 - found ===> ess-emacs26-18.10.2_2 depends on package: gmake>=4.3 - found ===> ess-emacs26-18.10.2_2 depends on file: /usr/local/bin/makeinfo - found ===> ess-emacs26-18.10.2_2 depends on package: perl5>=5.30.r1<5.31 - found ===> Configuring for ess-emacs26-18.10.2_2 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for ess-emacs26-18.10.2_2 gmake[1]: Entering directory '/construction/math/ess/ess-18.10.2' cd lisp; gmake all gmake[2]: Entering directory '/construction/math/ess/ess-18.10.2/lisp' /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-arc-d.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-bugs-l.el EV='18.10.2'; perl -pi -e "s/\".*\"/\"$EV\"/ if /ess-version/" ess-custom.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-dde.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-font-lock.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-generics.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-gretl.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-help.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-inf.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-utils.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile julia-mode.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-mode.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-mouse.el In julia-mode: julia-mode.el:681:10:Warning: reference to free variable `julia-syntax-propertize-function' /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-noweb-font-lock-mode.el In ess-completing-read: ess-utils.el:568:18:Warning: `ido-init-completion-maps' is an obsolete function (as of 25.1); it does nothing. /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-noweb-mode.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-noweb.el In end of data: ess-utils.el:1603:1:Warning: the function `ess-eval-linewise' is not known to be defined. /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-omg-d.el In inferior-ess: ess-inf.el:284:20:Warning: `syntax-begin-function' is an obsolete variable (as of 25.1). In ess-noweb-font-lock-fontify-chunk-by-number: ess-noweb-font-lock-mode.el:244:11:Warning: `syntax-begin-function' is an obsolete variable (as of 25.1). /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-omg-l.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-r-a.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-r-completion.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-r-flymake.el In end of data: ess-inf.el:3253:1:Warning: the following functions are not known to be defined: ess-skip-blanks-backward, ess-skip-blanks-forward, ess-mode /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-r-package.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-r-syntax.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-r-xref.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-rd.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-rdired.el In end of data: ess-omg-l.el:327:1:Warning: the function `ess-calculate-indent' is not known to be defined. /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-roxy.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-rutils.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-sas-a.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-sp4-d.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-sp5-d.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-sp6-d.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-sp6w-d.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-swv.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-toolbar.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-tracebug.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-trns.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile essd-els.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile make-regexp.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile mouseme.el In end of data: ess-sp6-d.el:215:1:Warning: the function `ess-sqpe-versions-create' is not known to be defined. /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile obsolete/ess-eldoc.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile obsolete/ess-r-args.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile obsolete/msdos.el Generating ess-autoloads.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --eval "(progn\ (setq make-backup-files nil)\ (setq generated-autoload-file (expand-file-name \"ess-autoloads.el\"))\ (setq find-file-visit-truename t)\ (update-directory-autoloads default-directory))" /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-bugs-d.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-custom.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-jags-d.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-julia.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-r-gui.el Not registering prefix "S3" from ess-s3-d. Affects: ("S3" "S3-customize-alist" "S3-mode") Not registering prefix "S4" from ess-s4-d. Affects: ("S4" "S4-customize-alist" "S4-mode") /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-lsp-l.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-s-lang.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-sas-l.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-site.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-stata-lang.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-stata-mode.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-vst-d.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-xls-d.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-r-mode.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-s3-d.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-s4-d.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-sp3-d.el /usr/local/bin/emacs-26.3 -batch -no-site-file -no-init-file --directory . -f batch-byte-compile ess-sas-d.el gmake[2]: Leaving directory '/construction/math/ess/ess-18.10.2/lisp' cd doc; gmake all gmake[2]: Entering directory '/construction/math/ess/ess-18.10.2/doc' LC_ALL=C LANG=en makeinfo --no-validate --plaintext --no-split -o - readme.texi \ | perl -pe 'last if /^Concept Index/;' > ../README LC_ALL=C LANG=en makeinfo --no-validate --plaintext --no-split -o - announc.texi \ | perl -pe 'last if /^Concept Index/;' > ../ANNOUNCE LC_ALL=C LANG=en makeinfo --no-validate --plaintext --no-split -o - news.texi > ../NEWS LC_ALL=C LANG=en makeinfo --no-validate --plaintext --no-split -o - onews.texi > ../ONEWS making Info documentation... LC_ALL=C LANG=en makeinfo ess.texi mv -f ess.info info/ gmake[2]: Leaving directory '/construction/math/ess/ess-18.10.2/doc' cd etc; gmake all gmake[2]: Entering directory '/construction/math/ess/ess-18.10.2/etc' gmake[2]: Nothing to be done for 'all'. gmake[2]: Leaving directory '/construction/math/ess/ess-18.10.2/etc' gmake[1]: Leaving directory '/construction/math/ess/ess-18.10.2' SUCCEEDED 00:00:10 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- ===> ess-emacs26-18.10.2_2 depends on executable: R - found ===> ess-emacs26-18.10.2_2 depends on file: /usr/local/bin/emacs-26.3 - found ===> ess-emacs26-18.10.2_2 depends on executable: indexinfo - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for ess-emacs26-18.10.2_2 ===> ess-emacs26-18.10.2_2 depends on executable: R - found ===> ess-emacs26-18.10.2_2 depends on file: /usr/local/bin/emacs-26.3 - found ===> ess-emacs26-18.10.2_2 depends on executable: indexinfo - found ===> Generating temporary packing list gmake[1]: Entering directory '/construction/math/ess/ess-18.10.2' cd lisp; gmake install gmake[2]: Entering directory '/construction/math/ess/ess-18.10.2/lisp' mkdir -p /construction/math/ess/stage/usr/local/share/emacs/site-lisp/ess cp -p ess-arc-d.elc ess-bugs-d.elc ess-bugs-l.elc ess-custom.elc ess-dde.elc ess-font-lock.elc ess-generics.elc ess-gretl.elc ess-help.elc ess-inf.elc ess-jags-d.elc ess-julia.elc ess-lsp-l.elc ess-mode.elc ess-mouse.elc ess-noweb-font-lock-mode.elc ess-noweb-mode.elc ess-noweb.elc ess-omg-d.elc ess-omg-l.elc ess-r-a.elc ess-r-completion.elc ess-r-flymake.elc ess-r-gui.elc ess-r-mode.elc ess-r-package.elc ess-r-syntax.elc ess-r-xref.elc ess-rd.elc ess-rdired.elc ess-roxy.elc ess-rutils.elc ess-s-lang.elc ess-s3-d.elc ess-s4-d.elc ess-sas-a.elc ess-sas-d.elc ess-sas-l.elc ess-site.elc ess-sp3-d.elc ess-sp4-d.elc ess-sp5-d.elc ess-sp6-d.elc ess-sp6w-d.elc ess-stata-lang.elc ess-stata-mode.elc ess-swv.elc ess-toolbar.elc ess-tracebug.elc ess-trns.elc ess-utils.elc ess-vst-d.elc ess-xls-d.elc ess.elc essd-els.elc julia-mode.elc make-regexp.elc mouseme.elc obsolete/ess-eldoc.elc obsolete/ess-r-args.elc obsolete/msdos.elc /construction/math/ess/stage/usr/local/share/emacs/site-lisp/ess if [ -f /etc/debian_version -a -n "/construction/math/ess/stage/usr/local/share/emacs/site-lisp" -a ! -f "/construction/math/ess/stage/usr/local/share/emacs/site-lisp/ess-site.el" ] ; \ then \ ln -s /construction/math/ess/stage/usr/local/share/emacs/site-lisp/ess/ess-site.el /construction/math/ess/stage/usr/local/share/emacs/site-lisp/ess-site.el ; \ fi; gmake[2]: Leaving directory '/construction/math/ess/ess-18.10.2/lisp' cd doc; gmake install gmake[2]: Entering directory '/construction/math/ess/ess-18.10.2/doc' mkdir -p /construction/math/ess/stage/usr/local/share/info cp -p info/ess.info /construction/math/ess/stage/usr/local/share/info test -f /construction/math/ess/stage/usr/local/share/info/dir || cp -p dir.txt /construction/math/ess/stage/usr/local/share/info/dir grep '* ESS: (ess).' /construction/math/ess/stage/usr/local/share/info/dir || \ (echo >> /construction/math/ess/stage/usr/local/share/info/dir; echo 'Emacs' >> /construction/math/ess/stage/usr/local/share/info/dir; \ echo '* ESS: (ess).' ' Emacs Speaks Statistics' >> /construction/math/ess/stage/usr/local/share/info/dir; \ echo ' (S/S+/R, SAS, BUGS, Stata, XLisp-Stat).' >> /construction/math/ess/stage/usr/local/share/info/dir) making HTML documentation... mkdir -p html LC_ALL=C LANG=en makeinfo --html --no-split --css-include=atouchofstyle.css -o html/ess.html ess.texi LC_ALL=C LANG=en makeinfo --html --no-split --css-include=atouchofstyle.css -o html/readme.html --no-validate readme.texi ## ^^^^^^^^^^^^^ (design bug: "FIXME" in ess.texi) mkdir -p html LC_ALL=C LANG=en makeinfo --html --no-split --css-include=atouchofstyle.css -o html/news.html allnews.texi mkdir -p /construction/math/ess/stage/usr/local/share/doc/ess cp -p ess.pdf readme.pdf /construction/math/ess/stage/usr/local/share/doc/ess cp -p html/ess.html html/readme.html html/news.html /construction/math/ess/stage/usr/local/share/doc/ess cp -p refcard/refcard.pdf /construction/math/ess/stage/usr/local/share/doc/ess gmake[2]: Leaving directory '/construction/math/ess/ess-18.10.2/doc' cd etc; gmake install gmake[2]: Entering directory '/construction/math/ess/ess-18.10.2/etc' mkdir -p /construction/math/ess/stage/usr/local/share/emacs/etc/ess/icons mkdir -p /construction/math/ess/stage/usr/local/share/emacs/etc/ess/ESSR/R cp -p .IS.RELEASE git-ref ess-sas-sh-command *.jl /construction/math/ess/stage/usr/local/share/emacs/etc/ess cp -p icons/*.xpm /construction/math/ess/stage/usr/local/share/emacs/etc/ess/icons cp -p ESSR/LOADREMOTE ESSR/VERSION /construction/math/ess/stage/usr/local/share/emacs/etc/ess/ESSR cp -p ESSR/R/*.R ESSR/R/.*.R /construction/math/ess/stage/usr/local/share/emacs/etc/ess/ESSR/R chmod +x /construction/math/ess/stage/usr/local/share/emacs/etc/ess/ess-sas-sh-command gmake[2]: Leaving directory '/construction/math/ess/ess-18.10.2/etc' gmake[1]: Leaving directory '/construction/math/ess/ess-18.10.2' ====> Compressing man pages (compress-man) ====> Running Q/A tests (stage-qa) Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks SUCCEEDED 00:00:05 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for ess-emacs26-18.10.2_2 file sizes/checksums [152]: 0% file sizes/checksums [152]: 65% file sizes/checksums [152]: 100% packing files [152]: 0% packing files [152]: 65% packing files [152]: 100% packing directories [0]: 0% packing directories [0]: 100% SUCCEEDED 00:00:03 TOTAL TIME 00:01:47