------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gettext-runtime-0.20.1.txz Installing /packages/All/ncurses-6.1.20190525.txz Installing /packages/All/bash-5.0.16.txz Installing /packages/All/libnghttp2-1.40.0.txz Installing /packages/All/ca_root_nss-3.51.txz ===== Message from ca_root_nss-3.51: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/openssl-1.1.1d,1.txz Installing /packages/All/curl-7.68.0.txz Installing /packages/All/freetype2-2.10.1.txz ===== Message from freetype2-2.10.1: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). Installing /packages/All/alsa-lib-1.1.2_2.txz ===== Message from alsa-lib-1.1.2_2: -- ===> NOTICE: The alsa-lib port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/giflib-5.2.1.txz Installing /packages/All/expat-2.2.8.txz Installing /packages/All/fontconfig-2.12.6,1.txz Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded Installing /packages/All/javavmwrapper-2.7.4.txz Installing /packages/All/libfontenc-1.1.4.txz Installing /packages/All/mkfontscale-1.2.1.txz Installing /packages/All/dejavu-2.37_1.txz ===== Message from dejavu-2.37_1: -- Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Installing /packages/All/java-zoneinfo-2019.b.txz Installing /packages/All/libXau-1.0.9.txz Installing /packages/All/libxml2-2.9.10.txz Installing /packages/All/libpthread-stubs-0.4.txz Installing /packages/All/xorgproto-2019.2.txz Installing /packages/All/libXdmcp-1.1.3.txz Installing /packages/All/libxcb-1.13.1.txz Installing /packages/All/libX11-1.6.9,1.txz Installing /packages/All/libXext-1.3.4,1.txz Installing /packages/All/libXfixes-5.0.3_2.txz Installing /packages/All/libXi-1.7.10,1.txz Installing /packages/All/libXrender-0.9.10_2.txz Installing /packages/All/libICE-1.0.10,1.txz Installing /packages/All/libSM-1.2.3,1.txz Installing /packages/All/libXt-1.2.0,1.txz Installing /packages/All/libXtst-1.2.3_2.txz Installing /packages/All/openjdk8-8.181.13_1.txz ===== Message from openjdk8-8.181.13_1: -- ====================================================================== This OpenJDK implementation requires procfs(5) mounted on /proc. If you have not done it yet, please do the following: mount -t procfs proc /proc To make it permanent, you need the following line in /etc/fstab: proc /proc procfs rw 0 0 ====================================================================== Installing /packages/All/closure-compiler-20180805.txz Installing /packages/All/coreutils-8.31.txz Installing /packages/All/gsed-4.8.txz Installing /packages/All/libffi-3.2.1_3.txz Installing /packages/All/readline-8.0.4.txz Installing /packages/All/python27-2.7.17_1.txz ===== Message from python27-2.7.17_1: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter Installing /packages/All/py27-setuptools-44.0.0.txz ===== Message from py27-setuptools-44.0.0: -- Only /usr/local/bin/easy_install-2.7 script has been installed since Python 2.7 is not the default Python version. Installing /packages/All/py27-gyp-20160504.txz Installing /packages/All/flock-2.19.txz Installing /packages/All/gdbm-1.18.1_1.txz Installing /packages/All/db5-5.3.28_7.txz Installing /packages/All/apr-1.7.0.1.6.1.txz ===== Message from apr-1.7.0.1.6.1: -- The Apache Portable Runtime project removed support for FreeTDS with version 1.6. Users requiring MS-SQL connectivity must migrate configurations to use the added ODBC driver and FreeTDS' ODBC features. Installing /packages/All/pcre-8.43_2.txz Installing /packages/All/perl5-5.30.1.txz ===== Message from perl5-5.30.1: -- The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Installing /packages/All/apache24-2.4.41.txz ===> Creating groups. Using existing group 'www'. ===> Creating users Using existing user 'www'. ===== Message from apache24-2.4.41: -- To run apache www server from startup, add apache24_enable="yes" in your /etc/rc.conf. Extra options can be found in startup script. Your hostname must be resolvable using at least 1 mechanism in /etc/nsswitch.conf typically DNS or /etc/hosts or apache might have issues starting depending on the modules you are using. - apache24 default build changed from static MPM to modular MPM - more modules are now enabled per default in the port - icons and error pages moved from WWWDIR to DATADIR If build with modular MPM and no MPM is activated in httpd.conf, then mpm_prefork will be activated as default MPM in etc/apache24/modules.d to keep compatibility with existing php/perl/python modules! Please compare the existing httpd.conf with httpd.conf.sample and merge missing modules/instructions into httpd.conf! Installing /packages/All/gperf-3.1.txz Installing /packages/All/gmake-4.2.1_3.txz Installing /packages/All/pkgconf-1.6.3,1.txz Installing /packages/All/png-1.6.37.txz Installing /packages/All/protobuf-3.11.4,1.txz Installing /packages/All/gflags-2.2.2_2.txz Installing /packages/All/c-ares-1.15.0_1.txz Installing /packages/All/grpc-1.22.0_2,2.txz Installing /packages/All/icu-66.1,1.txz Installing /packages/All/jbigkit-2.1_1.txz Installing /packages/All/jpeg-turbo-2.0.4.txz Installing /packages/All/tiff-4.1.0.txz Installing /packages/All/webp-1.1.0.txz Installing /packages/All/leptonica-1.76.0_1.txz ===== Message from leptonica-1.76.0_1: -- To use gplot (the optional programmatic interface to gnuplot), the math/gnuplot port must be installed. Installing /packages/All/libiconv-1.14_11.txz Installing /packages/All/python37-3.7.6.txz ===== Message from python37-3.7.6: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py37-gdbm databases/py-gdbm@py37 py37-sqlite3 databases/py-sqlite3@py37 py37-tkinter x11-toolkits/py-tkinter@py37 Installing /packages/All/glib-2.56.3_7,1.txz No schema files found: doing nothing. Installing /packages/All/wayland-1.16.0.txz Installing /packages/All/pciids-20200222.txz Installing /packages/All/libpciaccess-0.16.txz Installing /packages/All/libdrm-2.4.100.txz Installing /packages/All/libelf-0.8.13_3.txz Installing /packages/All/libXdamage-1.1.5.txz Installing /packages/All/libXrandr-1.5.2.txz Installing /packages/All/libxshmfence-1.3.txz Installing /packages/All/libXxf86vm-1.1.4_3.txz Installing /packages/All/mesa-libs-18.3.2_4.txz Installing /packages/All/pixman-0.38.4.txz Installing /packages/All/cairo-1.16.0,2.txz Installing /packages/All/graphite2-1.3.13_1.txz Installing /packages/All/harfbuzz-2.6.4.txz Installing /packages/All/fribidi-0.19.7.txz Installing /packages/All/font-bh-ttf-1.0.3_4.txz Installing /packages/All/font-misc-meltho-1.0.3_4.txz Installing /packages/All/font-misc-ethiopic-1.0.3_4.txz Installing /packages/All/encodings-1.0.5,1.txz Installing /packages/All/xorg-fonts-truetype-7.7_1.txz Installing /packages/All/libXft-2.3.3.txz Installing /packages/All/pango-1.42.4_3.txz Installing /packages/All/tesseract-data-4.0.0.txz Installing /packages/All/tesseract-4.1.1_1.txz Installing /packages/All/opencv-core-3.4.1_30.txz ===== Message from opencv-core-3.4.1_30: -- ===> NOTICE: The opencv-core port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/glog-0.4.0_1.txz Installing /packages/All/hdf-szip-2.1.1.txz Installing /packages/All/hdf5-1.10.6.txz Installing /packages/All/aom-1.0.0.3187.txz Installing /packages/All/libass-0.14.0.txz Installing /packages/All/dav1d-0.6.0.txz Installing /packages/All/gmp-6.2.0.txz Installing /packages/All/nettle-3.5.1_1.txz Installing /packages/All/libtasn1-4.15.0.txz Installing /packages/All/libunistring-0.9.10_1.txz Installing /packages/All/libidn2-2.3.0_1.txz Installing /packages/All/p11-kit-0.23.18.1.txz Installing /packages/All/tpm-emulator-0.7.4_2.txz ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. Installing /packages/All/trousers-0.3.14_2.txz ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. ===== Message from trousers-0.3.14_2: -- To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Installing /packages/All/gnutls-3.6.12.txz Installing /packages/All/opus-1.3.1.txz Installing /packages/All/libogg-1.3.4,4.txz Installing /packages/All/libvorbis-1.3.6,3.txz Installing /packages/All/libtheora-1.1.1_7.txz Installing /packages/All/libv4l-1.6.3_4.txz Installing /packages/All/libva-2.6.1_1.txz Installing /packages/All/libvdpau-1.3.txz Installing /packages/All/libvpx-1.8.2_1.txz Installing /packages/All/libx264-0.159.2991.txz Installing /packages/All/x265-3.2.1_2.txz Installing /packages/All/xvid-1.3.7,1.txz Installing /packages/All/ffmpeg-4.2.2_9,1.txz Installing /packages/All/libGLU-9.0.1.txz Installing /packages/All/freeglut-3.0.0_2.txz ===== Message from freeglut-3.0.0_2: -- Joystick support is untested and it is unknown if it works. Do not hesitate to contact x11@FreeBSD.org if this causes issues. Installing /packages/All/libXmu-1.1.3,1.txz Installing /packages/All/jasper-2.0.16_1.txz Installing /packages/All/opencv-3.4.1_30.txz ===== Message from opencv-3.4.1_30: -- ===> NOTICE: The opencv port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port SUCCEEDED 00:03:43 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- /!\ ap24-mod_pagespeed-1.12.34.2_27,1: Makefile warnings, please consider fixing /!\ lang/python27 reached End of Life and will be removed on 2020-12-31, consider converting to a modern version of python ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses deprecated version of python. It is scheduled to be removed on or after 2020-09-15. SUCCEEDED 00:00:10 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> ap24-mod_pagespeed-1.12.34.2_27,1 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- /!\ ap24-mod_pagespeed-1.12.34.2_27,1: Makefile warnings, please consider fixing /!\ lang/python27 reached End of Life and will be removed on 2020-12-31, consider converting to a modern version of python ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses deprecated version of python. It is scheduled to be removed on or after 2020-09-15. ===> ap24-mod_pagespeed-1.12.34.2_27,1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by ap24-mod_pagespeed-1.12.34.2_27,1 for building SUCCEEDED 00:00:12 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- /!\ ap24-mod_pagespeed-1.12.34.2_27,1: Makefile warnings, please consider fixing /!\ lang/python27 reached End of Life and will be removed on 2020-12-31, consider converting to a modern version of python ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses deprecated version of python. It is scheduled to be removed on or after 2020-09-15. ===> ap24-mod_pagespeed-1.12.34.2_27,1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by ap24-mod_pagespeed-1.12.34.2_27,1 for building => SHA256 Checksum OK for mod_pagespeed/version_for_cocoapods_6.0-46-g07e78061.tar.gz. => SHA256 Checksum OK for mod_pagespeed/ccf3c2f32.tar.gz. => SHA256 Checksum OK for mod_pagespeed/06b7bd9c.tar.gz. => SHA256 Checksum OK for mod_pagespeed/405b6e1.tar.gz. => SHA256 Checksum OK for mod_pagespeed/gflags-master.tar.gz. => SHA256 Checksum OK for mod_pagespeed/src-master.tar.gz. => SHA256 Checksum OK for mod_pagespeed/7260e4d.tar.gz. => SHA256 Checksum OK for mod_pagespeed/7da28c6.tar.gz. => SHA256 Checksum OK for mod_pagespeed/v0.5.1.tar.gz. => SHA256 Checksum OK for mod_pagespeed/aae6075.tar.gz. => SHA256 Checksum OK for mod_pagespeed/compiler-20161024.zip. => SHA256 Checksum OK for mod_pagespeed/apache-incubator-pagespeed-mod-a5cfe15_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/google-googlemock-release-1.7.0_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/google-googletest-release-1.7.0_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-apr-1.5.1_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-apr-util-1.5.4_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/google-brotli-v0.4.0-89-g882f418_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/google-closure-library-v20161024_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-incubator-pagespeed-drp-e9b72ea_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/pagespeed-giflib-99deb45_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/google-sparsehash-sparsehash-1.7_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/grpc-grpc-objective-c-v1.0.0-pre1-254-g2a69139aa7_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/redis-hiredis-v0.13.3_GH0.tar.gz. => SHA256 Checksum mismatch for mod_pagespeed/apache-httpd-2.2.29_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-httpd-2.4.10_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-incubator-pagespeed-icu-1b32282_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/open-source-parsers-jsoncpp-1.0.0_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/glennrp-libpng-libpng-1.2.56-signed_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/pagespeed-mod_fcgid-c63f176_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/nghttp2-nghttp2-v1.16.0-24-gf4474d57_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-incubator-pagespeed-optipng-e9a5bd6_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/google-protobuf-v3.0.0-beta-4-74-ge8ae137c_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/google-re2-2016-09-01_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-serf-1.3.8_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-incubator-pagespeed-zlib-1f93ffd_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/nanopb-nanopb-f8ac463_GH0.tar.gz. ===> Refetch for 1 more times files: mod_pagespeed/apache-httpd-2.2.29_GH0.tar.gz /!\ ap24-mod_pagespeed-1.12.34.2_27,1: Makefile warnings, please consider fixing /!\ lang/python27 reached End of Life and will be removed on 2020-12-31, consider converting to a modern version of python ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses deprecated version of python. It is scheduled to be removed on or after 2020-09-15. ===> ap24-mod_pagespeed-1.12.34.2_27,1 depends on file: /usr/local/sbin/pkg - found => apache-httpd-2.2.29_GH0.tar.gz doesn't seem to exist in /distfiles/mod_pagespeed. => Attempting to fetch https://codeload.github.com/apache/httpd/tar.gz/2.2.29?dummy=/apache-httpd-2.2.29_GH0.tar.gz fetch: https://codeload.github.com/apache/httpd/tar.gz/2.2.29?dummy=/apache-httpd-2.2.29_GH0.tar.gz: size unknown fetch: https://codeload.github.com/apache/httpd/tar.gz/2.2.29?dummy=/apache-httpd-2.2.29_GH0.tar.gz: size of remote file is not known apache-httpd-2.2.29_GH0.tar.gz 0 B 0 Bps apache-httpd-2.2.29_GH0.tar.gz 480 kB 731 kBps apache-httpd-2.2.29_GH0.tar.gz 2800 kB 2318 kBps apache-httpd-2.2.29_GH0.tar.gz 7132 kB 2698 kBps 02s ===> Fetching all distfiles required by ap24-mod_pagespeed-1.12.34.2_27,1 for building /!\ ap24-mod_pagespeed-1.12.34.2_27,1: Makefile warnings, please consider fixing /!\ lang/python27 reached End of Life and will be removed on 2020-12-31, consider converting to a modern version of python ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses deprecated version of python. It is scheduled to be removed on or after 2020-09-15. ===> ap24-mod_pagespeed-1.12.34.2_27,1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by ap24-mod_pagespeed-1.12.34.2_27,1 for building => SHA256 Checksum OK for mod_pagespeed/version_for_cocoapods_6.0-46-g07e78061.tar.gz. => SHA256 Checksum OK for mod_pagespeed/ccf3c2f32.tar.gz. => SHA256 Checksum OK for mod_pagespeed/06b7bd9c.tar.gz. => SHA256 Checksum OK for mod_pagespeed/405b6e1.tar.gz. => SHA256 Checksum OK for mod_pagespeed/gflags-master.tar.gz. => SHA256 Checksum OK for mod_pagespeed/src-master.tar.gz. => SHA256 Checksum OK for mod_pagespeed/7260e4d.tar.gz. => SHA256 Checksum OK for mod_pagespeed/7da28c6.tar.gz. => SHA256 Checksum OK for mod_pagespeed/v0.5.1.tar.gz. => SHA256 Checksum OK for mod_pagespeed/aae6075.tar.gz. => SHA256 Checksum OK for mod_pagespeed/compiler-20161024.zip. => SHA256 Checksum OK for mod_pagespeed/apache-incubator-pagespeed-mod-a5cfe15_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/google-googlemock-release-1.7.0_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/google-googletest-release-1.7.0_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-apr-1.5.1_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-apr-util-1.5.4_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/google-brotli-v0.4.0-89-g882f418_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/google-closure-library-v20161024_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-incubator-pagespeed-drp-e9b72ea_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/pagespeed-giflib-99deb45_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/google-sparsehash-sparsehash-1.7_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/grpc-grpc-objective-c-v1.0.0-pre1-254-g2a69139aa7_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/redis-hiredis-v0.13.3_GH0.tar.gz. => SHA256 Checksum mismatch for mod_pagespeed/apache-httpd-2.2.29_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-httpd-2.4.10_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-incubator-pagespeed-icu-1b32282_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/open-source-parsers-jsoncpp-1.0.0_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/glennrp-libpng-libpng-1.2.56-signed_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/pagespeed-mod_fcgid-c63f176_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/nghttp2-nghttp2-v1.16.0-24-gf4474d57_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-incubator-pagespeed-optipng-e9a5bd6_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/google-protobuf-v3.0.0-beta-4-74-ge8ae137c_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/google-re2-2016-09-01_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-serf-1.3.8_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/apache-incubator-pagespeed-zlib-1f93ffd_GH0.tar.gz. => SHA256 Checksum OK for mod_pagespeed/nanopb-nanopb-f8ac463_GH0.tar.gz. ===> Giving up on fetching files: mod_pagespeed/apache-httpd-2.2.29_GH0.tar.gz Make sure the Makefile and distinfo file (/xports/www/mod_pagespeed/distinfo) are up to date. If you are absolutely sure you want to override this check, type "make NO_CHECKSUM=yes [other args]". *** Error code 1 Stop. make[1]: stopped in /xports/www/mod_pagespeed *** Error code 1 Stop. make: stopped in /xports/www/mod_pagespeed FAILED 00:00:43