------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/perl5-5.30.1.txz pkg: Cannot runscript POST-INSTALL:Bad file descriptor ===== Message from perl5-5.30.1: -- The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Installing /packages/All/p5-Socket6-0.29.txz SUCCEEDED 00:00:03 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> beacon-1.4_4 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> beacon-1.4_4 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by beacon-1.4_4 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> beacon-1.4_4 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by beacon-1.4_4 for building => SHA256 Checksum OK for beacon-1.4.tar.gz. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> beacon-1.4_4 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by beacon-1.4_4 for building ===> Extracting for beacon-1.4_4 ===> beacon-1.4_4 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by beacon-1.4_4 for building => SHA256 Checksum OK for beacon-1.4.tar.gz. Extracted Memory Use: 2.35M SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for beacon-1.4_4 ===> Applying ports patches for beacon-1.4_4 ===> Applying dragonfly patches for beacon-1.4_4 /usr/bin/env WRKSRC=/construction/net/beacon/beacon-1.4 REWARNFILE=/construction/net/beacon/reinplace_warnings.txt /xports/Tools/scripts/sed_checked.sh -e 's/@HAVE_FREEBSD_TRUE@//' /construction/net/beacon/beacon-1.4/src/Makefile.in SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> beacon-1.4_4 depends on package: p5-Socket6>=0 - found ===> beacon-1.4_4 depends on package: perl5>=5.30.r1<5.31 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> beacon-1.4_4 depends on package: p5-Socket6>=0 - found ===> beacon-1.4_4 depends on package: perl5>=5.30.r1<5.31 - found ===> Configuring for beacon-1.4_4 configure: loading site script /xports/Templates/config.site checking build system type... x86_64-portbld-dragonfly5.9 checking host system type... x86_64-portbld-dragonfly5.9 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether make sets $(MAKE)... yes checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking for ranlib... ranlib checking whether cc understands -c and -o together... yes checking for perl... (cached) /usr/local/bin/perl checking for swig... no checking how to run the C preprocessor... cpp checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for arpa/inet.h... (cached) yes checking for fcntl.h... (cached) yes checking for inttypes.h... (cached) yes checking for limits.h... (cached) yes checking for malloc.h... (cached) no checking for memory.h... (cached) yes checking for netdb.h... (cached) yes checking for netinet/in.h... (cached) yes checking for stddef.h... (cached) yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for sys/ioctl.h... (cached) yes checking for sys/param.h... (cached) yes checking for sys/socket.h... (cached) yes checking for sys/time.h... (cached) yes checking sys/timeb.h usability... yes checking sys/timeb.h presence... yes checking for sys/timeb.h... yes checking for unistd.h... (cached) yes checking for stdbool.h that conforms to C99... (cached) yes checking for _Bool... (cached) yes checking for an ANSI C-conforming const... yes checking for uid_t in sys/types.h... (cached) yes checking for inline... inline checking for pid_t... (cached) yes checking for size_t... (cached) yes checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for vfork.h... (cached) no checking for fork... (cached) yes checking for vfork... (cached) yes checking for working fork... yes checking for working vfork... (cached) yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... (cached) yes checking for working memcmp... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible realloc... yes checking for sys/select.h... (cached) yes checking for sys/socket.h... (cached) yes checking types of arguments for select... int,fd_set *,struct timeval * checking whether lstat correctly handles trailing slash... (cached) yes checking whether stat accepts an empty string... no checking for working strtod... (cached) yes checking for vprintf... (cached) yes checking for _doprnt... no checking for gethostbyaddr... yes checking for gethostbyname... (cached) yes checking for gethostname... (cached) yes checking for gettimeofday... (cached) yes checking for inet_ntoa... (cached) yes checking for inet_ntop... (cached) yes checking for memmove... (cached) yes checking for memset... (cached) yes checking for mkdir... yes checking for modf... yes checking for select... (cached) yes checking for socket... yes checking for strchr... (cached) yes checking for strcspn... (cached) yes checking for strdup... (cached) yes checking for strrchr... (cached) yes checking for strstr... (cached) yes checking for strtol... (cached) yes checking for uname... (cached) yes configure: loading site script /xports/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether make sets $(MAKE)... yes checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking how to run the C preprocessor... cpp checking for ranlib... ranlib checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for sys/time.h... (cached) yes checking whether time.h and sys/time.h may both be included... yes checking for an ANSI C-conforming const... yes checking for size_t... (cached) yes checking stropts.h usability... no checking stropts.h presence... no checking for stropts.h... no checking sys/filio.h usability... yes checking sys/filio.h presence... yes checking for sys/filio.h... yes checking for stdint.h... (cached) yes checking for inttypes.h... (cached) yes checking for int8_t... yes checking for int16_t... (cached) yes checking for int32_t... (cached) yes checking for int64_t... yes checking for uint8_t in ... yes checking for uint16_t in ... yes checking for uint32_t in ... yes checking whether byte ordering is bigendian... no checking whether char is unsigned... no checking for /dev/urandom... yes checking for vsnprintf... (cached) yes checking for inet_pton... yes checking for inet_ntop... (cached) yes checking for library containing socket... none required checking for library containing inet_addr... none required checking whether to enable IPv6... no checking for getipnodebyname in ... yes checking for struct addrinfo in ... yes checking for sin6_len in struct sockaddr_in6... yes checking for msg_control in struct msghdr... yes checking for gtkdoc-scan... no configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating examples/Makefile config.status: creating examples/rtp/Makefile config.status: creating examples/sap/Makefile config.status: creating examples/sdp/Makefile config.status: creating src/Makefile config.status: creating tests/Makefile config.status: creating src/uclconf.h config.status: executing depfiles commands configure: creating ./config.status config.status: creating Makefile config.status: creating Net-Multicast-Beacon/Makefile config.status: creating libbeacon/Makefile config.status: creating src/FreeBSD/beacon config.status: creating src/Makefile config.status: creating src/beacon config.status: creating config.h config.status: executing depfiles commands SUCCEEDED 00:00:09 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for beacon-1.4_4 --- ./aclocal.m4 --- CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /construction/net/beacon/beacon-1.4/config/missing --run aclocal-1.11 /construction/net/beacon/beacon-1.4/config/missing: aclocal-1.11: not found WARNING: `aclocal-1.11' is missing on your system. You should only need it if you modified `acinclude.m4' or `configure.ac'. You might want to install the `Automake' and `Perl' packages. Grab them from any GNU archive site. --- ./configure --- --- ./config.h.in --- --- ./configure --- CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /construction/net/beacon/beacon-1.4/config/missing --run autoconf --- ./config.h.in --- (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /construction/net/beacon/beacon-1.4/config/missing --run autoheader) --- ./configure --- /construction/net/beacon/beacon-1.4/config/missing: autoconf: not found --- ./config.h.in --- /construction/net/beacon/beacon-1.4/config/missing: autoheader: not found --- ./configure --- WARNING: `autoconf' is missing on your system. You should only need it if you modified `configure.ac'. You might want to install the `Autoconf' and `GNU m4' packages. Grab them from any GNU archive site. --- ./config.h.in --- WARNING: `autoheader' is missing on your system. You should only need it if you modified `acconfig.h' or `configure.ac'. You might want to install the `Autoconf' and `GNU m4' packages. Grab them from any GNU archive site. --- ./config.status --- /bin/sh ./config.status --recheck --- ./config.h.in --- rm -f stamp-h1 touch ./config.h.in --- ./config.status --- running CONFIG_SHELL=/bin/sh /bin/sh ./configure --enable-ipv6 --prefix=/usr/local --localstatedir=/var --mandir=/usr/local/man --infodir=/usr/local/share/info/ --build=x86_64-portbld-dragonfly5.9 build_alias=x86_64-portbld-dragonfly5.9 CC=cc CFLAGS=-pipe -O2 -fno-strict-aliasing LDFLAGS= LIBS= CPPFLAGS= CPP=cpp --no-create --no-recursion checking build system type... x86_64-portbld-dragonfly5.9 checking host system type... x86_64-portbld-dragonfly5.9 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... config/install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking for ranlib... ranlib checking whether cc understands -c and -o together... yes checking for perl... /usr/local/bin/perl checking for swig... no checking how to run the C preprocessor... cpp checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for inttypes.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking malloc.h usability... no checking malloc.h presence... no checking for malloc.h... no checking for memory.h... (cached) yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/timeb.h usability... yes checking sys/timeb.h presence... yes checking for sys/timeb.h... yes checking for unistd.h... (cached) yes checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for an ANSI C-conforming const... yes checking for uid_t in sys/types.h... yes checking for inline... inline checking for pid_t... yes checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking for working memcmp... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible realloc... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking for sys/socket.h... (cached) yes checking types of arguments for select... int,fd_set *,struct timeval * checking whether lstat correctly handles trailing slash... yes checking whether stat accepts an empty string... no checking for working strtod... yes checking for vprintf... yes checking for _doprnt... no checking for gethostbyaddr... yes checking for gethostbyname... yes checking for gethostname... yes checking for gettimeofday... yes checking for inet_ntoa... yes checking for inet_ntop... yes checking for memmove... yes checking for memset... yes checking for mkdir... yes checking for modf... yes checking for select... yes checking for socket... yes checking for strchr... yes checking for strcspn... yes checking for strdup... yes checking for strrchr... yes checking for strstr... yes checking for strtol... yes checking for uname... yes checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ../config/install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... gcc3 checking how to run the C preprocessor... cpp checking for ranlib... ranlib checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking whether time.h and sys/time.h may both be included... yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking stropts.h usability... no checking stropts.h presence... no checking for stropts.h... no checking sys/filio.h usability... yes checking sys/filio.h presence... yes checking for sys/filio.h... yes checking for stdint.h... (cached) yes checking for inttypes.h... (cached) yes checking for int8_t... yes checking for int16_t... yes checking for int32_t... yes checking for int64_t... yes checking for uint8_t in ... yes checking for uint16_t in ... yes checking for uint32_t in ... yes checking whether byte ordering is bigendian... no checking whether char is unsigned... no checking for /dev/urandom... yes checking for vsnprintf... yes checking for inet_pton... yes checking for inet_ntop... yes checking for library containing socket... none required checking for library containing inet_addr... none required checking whether to enable IPv6... no checking for getipnodebyname in ... yes checking for struct addrinfo in ... yes checking for sin6_len in struct sockaddr_in6... yes checking for msg_control in struct msghdr... yes checking for gtkdoc-scan... no configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating examples/Makefile config.status: creating examples/rtp/Makefile config.status: creating examples/sap/Makefile config.status: creating examples/sdp/Makefile config.status: creating src/Makefile config.status: creating tests/Makefile config.status: creating src/uclconf.h config.status: src/uclconf.h is unchanged config.status: executing depfiles commands configure: creating ./config.status --- stamp-h1 --- cd . && /bin/sh ./config.status config.h config.status: creating config.h config.status: config.h is unchanged --- config.h --- --- all --- /usr/bin/make all-recursive --- all-recursive --- Making all in common --- all-recursive --- Making all in src --- version.h --- --- uclconf.h --- --- version.h --- sed -e 's/.*/#define CCL_VERSION "v&"/' ../VERSION > version.h --- all --- /usr/bin/make all-am --- asarray.o --- --- base64.o --- --- btree.o --- --- crypt_random.o --- --- debug.o --- --- drand48.o --- --- hmac.o --- --- mbus.o --- --- mbus_addr.o --- --- mbus_config.o --- --- asarray.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT asarray.o -MD -MP -MF .deps/asarray.Tpo -c -o asarray.o asarray.c --- base64.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT base64.o -MD -MP -MF .deps/base64.Tpo -c -o base64.o base64.c --- btree.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT btree.o -MD -MP -MF .deps/btree.Tpo -c -o btree.o btree.c --- crypt_random.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT crypt_random.o -MD -MP -MF .deps/crypt_random.Tpo -c -o crypt_random.o crypt_random.c --- debug.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT debug.o -MD -MP -MF .deps/debug.Tpo -c -o debug.o debug.c --- drand48.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT drand48.o -MD -MP -MF .deps/drand48.Tpo -c -o drand48.o drand48.c --- hmac.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT hmac.o -MD -MP -MF .deps/hmac.Tpo -c -o hmac.o hmac.c --- mbus.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT mbus.o -MD -MP -MF .deps/mbus.Tpo -c -o mbus.o mbus.c --- mbus_config.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT mbus_config.o -MD -MP -MF .deps/mbus_config.Tpo -c -o mbus_config.o mbus_config.c --- mbus_addr.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT mbus_addr.o -MD -MP -MF .deps/mbus_addr.Tpo -c -o mbus_addr.o mbus_addr.c --- btree.o --- btree.c:45:1: warning: 'btree_validate_node' defined but not used [-Wunused-function] btree_validate_node(btree_node_t *node, btree_node_t *parent) ^~~~~~~~~~~~~~~~~~~ --- debug.o --- mv -f .deps/debug.Tpo .deps/debug.Po --- mbus_parser.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT mbus_parser.o -MD -MP -MF .deps/mbus_parser.Tpo -c -o mbus_parser.o mbus_parser.c --- crypt_random.o --- mv -f .deps/crypt_random.Tpo .deps/crypt_random.Po --- drand48.o --- mv -f .deps/drand48.Tpo .deps/drand48.Po --- md5.o --- --- memory.o --- --- md5.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT md5.o -MD -MP -MF .deps/md5.Tpo -c -o md5.o md5.c --- memory.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT memory.o -MD -MP -MF .deps/memory.Tpo -c -o memory.o memory.c --- hmac.o --- mv -f .deps/hmac.Tpo .deps/hmac.Po --- net_udp.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT net_udp.o -MD -MP -MF .deps/net_udp.Tpo -c -o net_udp.o net_udp.c --- btree.o --- mv -f .deps/btree.Tpo .deps/btree.Po --- ntp.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT ntp.o -MD -MP -MF .deps/ntp.Tpo -c -o ntp.o ntp.c --- memory.o --- mv -f .deps/memory.Tpo .deps/memory.Po --- qfDES.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT qfDES.o -MD -MP -MF .deps/qfDES.Tpo -c -o qfDES.o qfDES.c --- ntp.o --- mv -f .deps/ntp.Tpo .deps/ntp.Po --- rijndael-alg-fst.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT rijndael-alg-fst.o -MD -MP -MF .deps/rijndael-alg-fst.Tpo -c -o rijndael-alg-fst.o rijndael-alg-fst.c --- base64.o --- mv -f .deps/base64.Tpo .deps/base64.Po --- rijndael-api-fst.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT rijndael-api-fst.o -MD -MP -MF .deps/rijndael-api-fst.Tpo -c -o rijndael-api-fst.o rijndael-api-fst.c --- mbus_addr.o --- mv -f .deps/mbus_addr.Tpo .deps/mbus_addr.Po --- rtp.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT rtp.o -MD -MP -MF .deps/rtp.Tpo -c -o rtp.o rtp.c --- qfDES.o --- qfDES.c: In function 'qfDES': qfDES.c:578:24: warning: variable 'oldMode' set but not used [-Wunused-but-set-variable] static QFDES_mode oldMode; ^~~~~~~ --- net_udp.o --- In function 'udp_host_addr4', inlined from 'udp_host_addr' at net_udp.c:940:21: net_udp.c:458:2: warning: 'strncpy' specified bound 256 equals destination size [-Wstringop-truncation] strncpy(hname, inet_ntoa(iaddr), MAXHOSTNAMELEN); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mv -f .deps/net_udp.Tpo .deps/net_udp.Po --- sap.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT sap.o -MD -MP -MF .deps/sap.Tpo -c -o sap.o sap.c --- mbus_parser.o --- mv -f .deps/mbus_parser.Tpo .deps/mbus_parser.Po --- sdp.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT sdp.o -MD -MP -MF .deps/sdp.Tpo -c -o sdp.o sdp.c sdp.c: In function 'sdp_handle_session_key': sdp.c:90:21: warning: format '%a' expects argument of type 'float *', but argument 3 has type 'char **' [-Wformat=] sscanf(value, "%as %as %ld %as %as %as\n", ~^ &(session->username),&(session->session_id), &(session->version), ~~~~~~~~~~~~~~~~~~~~ sdp.c:90:25: warning: format '%a' expects argument of type 'float *', but argument 4 has type 'char **' [-Wformat=] sscanf(value, "%as %as %ld %as %as %as\n", ~^ &(session->username),&(session->session_id), &(session->version), ~~~~~~~~~~~~~~~~~~~~~~ sdp.c:90:33: warning: format '%a' expects argument of type 'float *', but argument 6 has type 'char **' [-Wformat=] sscanf(value, "%as %as %ld %as %as %as\n", ~^ sdp.c:92:5: &(network->network_type), &(network->address_type), ~~~~~~~~~~~~~~~~~~~~~~~~ sdp.c:90:37: warning: format '%a' expects argument of type 'float *', but argument 7 has type 'char **' [-Wformat=] sscanf(value, "%as %as %ld %as %as %as\n", ~^ sdp.c:92:31: &(network->network_type), &(network->address_type), ~~~~~~~~~~~~~~~~~~~~~~~~ --- sap.o --- sap.c: In function 'sap_recv': sap.c:105:15: warning: variable 'buflen' set but not used [-Wunused-but-set-variable] int buflen; ^~~~~~ --- sdp.o --- sdp.c:90:41: warning: format '%a' expects argument of type 'float *', but argument 8 has type 'char **' [-Wformat=] sscanf(value, "%as %as %ld %as %as %as\n", ~^ sdp.c:93:5: &(network->address)); ~~~~~~~~~~~~~~~~~~~ sdp.c:118:21: warning: format '%a' expects argument of type 'float *', but argument 3 has type 'char **' [-Wformat=] sscanf(value, "%as %as %as\n", &(network->network_type), ~^ ~~~~~~~~~~~~~~~~~~~~~~~~ sdp.c:118:25: warning: format '%a' expects argument of type 'float *', but argument 4 has type 'char **' [-Wformat=] sscanf(value, "%as %as %as\n", &(network->network_type), ~^ &(network->address_type), &(network->address)); ~~~~~~~~~~~~~~~~~~~~~~~~ sdp.c:118:29: warning: format '%a' expects argument of type 'float *', but argument 5 has type 'char **' [-Wformat=] sscanf(value, "%as %as %as\n", &(network->network_type), ~^ &(network->address_type), &(network->address)); ~~~~~~~~~~~~~~~~~~~ sdp.c:133:21: warning: format '%a' expects argument of type 'float *', but argument 3 has type 'char **' [-Wformat=] sscanf(value, "%a[^:]:%a[^\n]", &(bwm->modifier), &(bwm->value)); ~^ ~~~~~~~~~~~~~~~~ sdp.c:133:28: warning: format '%a' expects argument of type 'float *', but argument 4 has type 'char **' [-Wformat=] sscanf(value, "%a[^:]:%a[^\n]", &(bwm->modifier), &(bwm->value)); ~^ ~~~~~~~~~~~~~ sdp.c:149:21: warning: format '%a' expects argument of type 'float *', but argument 3 has type 'char **' [-Wformat=] sscanf(value, "%as %as %as\n", &(repeat->interval), &(repeat->duration), ~^ ~~~~~~~~~~~~~~~~~~~ sdp.c:149:25: warning: format '%a' expects argument of type 'float *', but argument 4 has type 'char **' [-Wformat=] sscanf(value, "%as %as %as\n", &(repeat->interval), &(repeat->duration), ~^ ~~~~~~~~~~~~~~~~~~~ sdp.c:149:29: warning: format '%a' expects argument of type 'float *', but argument 5 has type 'char **' [-Wformat=] sscanf(value, "%as %as %as\n", &(repeat->interval), &(repeat->duration), ~^ &(repeat->offsets)); ~~~~~~~~~~~~~~~~~~ --- rtp.o --- rtp.c: In function 'format_rtcp_sdes': --- sdp.o --- sdp.c:174:21: warning: format '%a' expects argument of type 'float *', but argument 3 has type 'char **' [-Wformat=] sscanf(value, "%a[^:]:%a[^\n]", &(encrypt->method), &(encrypt->key)); ~^ ~~~~~~~~~~~~~~~~~~ sdp.c:174:28: warning: format '%a' expects argument of type 'float *', but argument 4 has type 'char **' [-Wformat=] sscanf(value, "%a[^:]:%a[^\n]", &(encrypt->method), &(encrypt->key)); ~^ ~~~~~~~~~~~~~~~ --- rtp.o --- rtp.c:2524:8: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((item != NULL) && ((strlen(item) + (size_t) 2) <= remaining_len)) { ^ rtp.c:2528:4: note: here case 1: item = rtp_get_sdes(session, ssrc, RTCP_SDES_EMAIL); ^~~~ rtp.c:2529:8: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((item != NULL) && ((strlen(item) + (size_t) 2) <= remaining_len)) { ^ rtp.c:2533:4: note: here case 2: item = rtp_get_sdes(session, ssrc, RTCP_SDES_PHONE); ^~~~ rtp.c:2534:8: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((item != NULL) && ((strlen(item) + (size_t) 2) <= remaining_len)) { ^ rtp.c:2538:4: note: here case 3: item = rtp_get_sdes(session, ssrc, RTCP_SDES_LOC); ^~~~ rtp.c:2539:8: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((item != NULL) && ((strlen(item) + (size_t) 2) <= remaining_len)) { ^ rtp.c:2543:4: note: here case 4: item = rtp_get_sdes(session, ssrc, RTCP_SDES_PRIV); ^~~~ --- sdp.o --- sdp.c:213:21: warning: format '%a' expects argument of type 'float *', but argument 3 has type 'char **' [-Wformat=] sscanf(value, "%as %d %as %as\n", &(media->name), ~^ ~~~~~~~~~~~~~~ sdp.c:213:28: warning: format '%a' expects argument of type 'float *', but argument 5 has type 'char **' [-Wformat=] sscanf(value, "%as %d %as %as\n", &(media->name), ~^ &(media->port), &(media->transport), ~~~~~~~~~~~~~~~~~~~ sdp.c:213:32: warning: format '%a' expects argument of type 'float *', but argument 6 has type 'char **' [-Wformat=] sscanf(value, "%as %d %as %as\n", &(media->name), ~^ sdp.c:215:5: &(media->format_list)); ~~~~~~~~~~~~~~~~~~~~~ sdp.c: In function 'sdp_handle_media_key': sdp.c:251:21: warning: format '%a' expects argument of type 'float *', but argument 3 has type 'char **' [-Wformat=] sscanf(value, "%as %as %as\n", &(network->network_type), ~^ ~~~~~~~~~~~~~~~~~~~~~~~~ sdp.c:251:25: warning: format '%a' expects argument of type 'float *', but argument 4 has type 'char **' [-Wformat=] sscanf(value, "%as %as %as\n", &(network->network_type), ~^ &(network->address_type), &(network->address)); ~~~~~~~~~~~~~~~~~~~~~~~~ sdp.c:251:29: warning: format '%a' expects argument of type 'float *', but argument 5 has type 'char **' [-Wformat=] sscanf(value, "%as %as %as\n", &(network->network_type), ~^ &(network->address_type), &(network->address)); ~~~~~~~~~~~~~~~~~~~ sdp.c:266:21: warning: format '%a' expects argument of type 'float *', but argument 3 has type 'char **' [-Wformat=] sscanf(value, "%as:%as\n", &(bwm->modifier), &(bwm->value)); ~^ ~~~~~~~~~~~~~~~~ sdp.c:266:25: warning: format '%a' expects argument of type 'float *', but argument 4 has type 'char **' [-Wformat=] sscanf(value, "%as:%as\n", &(bwm->modifier), &(bwm->value)); ~^ ~~~~~~~~~~~~~ sdp.c:278:21: warning: format '%a' expects argument of type 'float *', but argument 3 has type 'char **' [-Wformat=] sscanf(value, "%as:%as\n", &(encrypt->method), &(encrypt->key)); ~^ ~~~~~~~~~~~~~~~~~~ sdp.c:278:25: warning: format '%a' expects argument of type 'float *', but argument 4 has type 'char **' [-Wformat=] sscanf(value, "%as:%as\n", &(encrypt->method), &(encrypt->key)); ~^ ~~~~~~~~~~~~~~~ sdp.c:317:21: warning: format '%a' expects argument of type 'float *', but argument 3 has type 'char **' [-Wformat=] sscanf(value, "%as %d %as %as\n", &(new_media->name), ~^ ~~~~~~~~~~~~~~~~~~ sdp.c:317:28: warning: format '%a' expects argument of type 'float *', but argument 5 has type 'char **' [-Wformat=] sscanf(value, "%as %d %as %as\n", &(new_media->name), ~^ &(new_media->port), &(new_media->transport), ~~~~~~~~~~~~~~~~~~~~~~~ sdp.c:317:32: warning: format '%a' expects argument of type 'float *', but argument 6 has type 'char **' [-Wformat=] sscanf(value, "%as %d %as %as\n", &(new_media->name), ~^ sdp.c:319:5: &(new_media->format_list)); ~~~~~~~~~~~~~~~~~~~~~~~~~ sdp.c: In function 'sdp_make': sdp.c:472:5: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] session->username, session->session_id, session->version); ^~~~~~~ sdp.c:477:7: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] session->network->address); ^~~~~~~ sdp.c:479:3: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] sprintf(sdp_string, "%ss=%s\n", sdp_string, session->name); ^~~~~~~ sdp.c:482:5: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] sprintf(sdp_string, "%si=%s\n", sdp_string, session->information); ^~~~~~~ sdp.c:485:5: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] sprintf(sdp_string, "%su=%s\n", sdp_string, session->uri); ^~~~~~~ sdp.c:488:5: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] sprintf(sdp_string, "%se=%s\n", sdp_string, session->email); ^~~~~~~ sdp.c:491:5: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] sprintf(sdp_string, "%sp=%s\n", sdp_string, session->phone); ^~~~~~~ sdp.c:497:6: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] session->network->address); ^~~~~~~ sdp.c:502:6: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] session->bandwidth_modifier->value); ^~~~~~~ sdp.c:505:4: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] session->start_time, session->stop_time); ^~~~~~~ sdp.c:509:5: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] sprintf(sdp_string, "%sz=%ld %ld", sdp_string, tz->adjustment, tz->offset); ^~~~~~~ sdp.c:513:8: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] tz->next->adjustment, tz->next->offset); ^~ sdp.c:516:5: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] sprintf(sdp_string, "%s\n", sdp_string); ^~~~~~~ sdp.c:522:8: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] session->encryption->method); ^~~~~~~ sdp.c:526:8: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] session->encryption->key); ^~~~~~~ sdp.c:532:6: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] attr->key, attr->value); ^~~~ sdp.c:541:8: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] media->transport, media->format_list); ^~~~~ sdp.c:545:8: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] media->format_list); ^~~~~ sdp.c:547:7: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] sprintf(sdp_string, "%si=%s\n", sdp_string, media->information); ^~~~~~~ sdp.c:553:8: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] media->network->address); ^~~~~ sdp.c:558:8: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] media->bandwidth_modifier->value); ^~~~~ sdp.c:563:3: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] media->encryption->method); ^~~~~ sdp.c:567:3: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] media->encryption->key); ^~~~~ sdp.c:573:8: warning: passing argument 1 to restrict-qualified parameter aliases with argument 3 [-Wrestrict] attr->key, attr->value); ^~~~ --- mbus_config.o --- mv -f .deps/mbus_config.Tpo .deps/mbus_config.Po --- util.o --- cc -DHAVE_CONFIG_H -I. -fPIC -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT util.o -MD -MP -MF .deps/util.Tpo -c -o util.o util.c --- sap.o --- mv -f .deps/sap.Tpo .deps/sap.Po --- uclconf.h --- --- mbus.o --- mv -f .deps/mbus.Tpo .deps/mbus.Po --- asarray.o --- mv -f .deps/asarray.Tpo .deps/asarray.Po --- md5.o --- mv -f .deps/md5.Tpo .deps/md5.Po --- rijndael-alg-fst.o --- mv -f .deps/rijndael-alg-fst.Tpo .deps/rijndael-alg-fst.Po --- util.o --- mv -f .deps/util.Tpo .deps/util.Po --- rijndael-api-fst.o --- mv -f .deps/rijndael-api-fst.Tpo .deps/rijndael-api-fst.Po --- sdp.o --- mv -f .deps/sdp.Tpo .deps/sdp.Po --- qfDES.o --- mv -f .deps/qfDES.Tpo .deps/qfDES.Po --- rtp.o --- mv -f .deps/rtp.Tpo .deps/rtp.Po --- libuclmmbase.a --- rm -f libuclmmbase.a ar cru libuclmmbase.a asarray.o base64.o btree.o crypt_random.o debug.o drand48.o hmac.o mbus.o mbus_addr.o mbus_config.o mbus_parser.o md5.o memory.o net_udp.o ntp.o qfDES.o rijndael-alg-fst.o rijndael-api-fst.o rtp.o sap.o sdp.o util.o /usr/libexec/binutils227/elf/ar: `u' modifier ignored since `D' is the default (see `U') ranlib libuclmmbase.a Making all in tests --- test_base64.o --- --- test_des.o --- --- test_md5.o --- --- test_net_udp.o --- --- test_memory.o --- --- test_mbus_parser.o --- --- test_mbus_addr.o --- --- test.o --- --- test_base64.o --- cc -DHAVE_CONFIG_H -I. -I../src -I../src -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT test_base64.o -MD -MP -MF .deps/test_base64.Tpo -c -o test_base64.o test_base64.c --- test_des.o --- cc -DHAVE_CONFIG_H -I. -I../src -I../src -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT test_des.o -MD -MP -MF .deps/test_des.Tpo -c -o test_des.o test_des.c --- test_md5.o --- cc -DHAVE_CONFIG_H -I. -I../src -I../src -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT test_md5.o -MD -MP -MF .deps/test_md5.Tpo -c -o test_md5.o test_md5.c --- test_net_udp.o --- cc -DHAVE_CONFIG_H -I. -I../src -I../src -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT test_net_udp.o -MD -MP -MF .deps/test_net_udp.Tpo -c -o test_net_udp.o test_net_udp.c --- test_memory.o --- cc -DHAVE_CONFIG_H -I. -I../src -I../src -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT test_memory.o -MD -MP -MF .deps/test_memory.Tpo -c -o test_memory.o test_memory.c --- test_mbus_parser.o --- cc -DHAVE_CONFIG_H -I. -I../src -I../src -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT test_mbus_parser.o -MD -MP -MF .deps/test_mbus_parser.Tpo -c -o test_mbus_parser.o test_mbus_parser.c --- test_mbus_addr.o --- cc -DHAVE_CONFIG_H -I. -I../src -I../src -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT test_mbus_addr.o -MD -MP -MF .deps/test_mbus_addr.Tpo -c -o test_mbus_addr.o test_mbus_addr.c --- test.o --- cc -DHAVE_CONFIG_H -I. -I../src -I../src -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT test.o -MD -MP -MF .deps/test.Tpo -c -o test.o test.c --- test_des.o --- mv -f .deps/test_des.Tpo .deps/test_des.Po --- test_memory.o --- mv -f .deps/test_memory.Tpo .deps/test_memory.Po --- test.o --- mv -f .deps/test.Tpo .deps/test.Po --- test_base64.o --- mv -f .deps/test_base64.Tpo .deps/test_base64.Po --- test_md5.o --- mv -f .deps/test_md5.Tpo .deps/test_md5.Po --- test_mbus_addr.o --- mv -f .deps/test_mbus_addr.Tpo .deps/test_mbus_addr.Po --- test_mbus_parser.o --- mv -f .deps/test_mbus_parser.Tpo .deps/test_mbus_parser.Po --- test_net_udp.o --- mv -f .deps/test_net_udp.Tpo .deps/test_net_udp.Po --- test-libcommon --- cc -I../src -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -L../src -o test-libcommon test_base64.o test_des.o test_md5.o test_net_udp.o test_memory.o test_mbus_parser.o test_mbus_addr.o test.o -luclmmbase Making all in examples --- all-recursive --- Making all in rtp --- rtpdemo.o --- cc -DHAVE_CONFIG_H -I. -I../../src -I../../src -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT rtpdemo.o -MD -MP -MF .deps/rtpdemo.Tpo -c -o rtpdemo.o rtpdemo.c mv -f .deps/rtpdemo.Tpo .deps/rtpdemo.Po --- rtpdemo --- cc -I../../src -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -L../../src -o rtpdemo rtpdemo.o -luclmmbase Making all in sap --- sapdemo.o --- cc -DHAVE_CONFIG_H -I. -I../../src -I../../src -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT sapdemo.o -MD -MP -MF .deps/sapdemo.Tpo -c -o sapdemo.o sapdemo.c sapdemo.c:25:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] main() ^~~~ mv -f .deps/sapdemo.Tpo .deps/sapdemo.Po --- sapdemo --- cc -I../../src -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -L../../src -o sapdemo sapdemo.o -luclmmbase Making all in sdp --- sdpdemo.o --- cc -DHAVE_CONFIG_H -I. -I../../src -I../../src -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -MT sdpdemo.o -MD -MP -MF .deps/sdpdemo.Tpo -c -o sdpdemo.o sdpdemo.c sdpdemo.c: In function 'sap_handler': sdpdemo.c:32:29: warning: pointer targets in passing argument 1 of 'sdp_parse' differ in signedness [-Wpointer-sign] session = sdp_parse(packet->payload); ~~~~~~^~~~~~~~~ In file included from sdpdemo.c:22: ../../src/sdp.h:126:6: note: expected 'char *' but argument is of type 'unsigned char *' sdp *sdp_parse(char *sdp_string); ^~~~~~~~~ sdpdemo.c:40:19: warning: pointer targets in passing argument 1 of 'strcmp' differ in signedness [-Wpointer-sign] if(strcmp(packet->payload, new_payload) != 0) ~~~~~~^~~~~~~~~ In file included from sdpdemo.c:13: /usr/include/string.h:88:6: note: expected 'const char *' but argument is of type 'unsigned char *' int strcmp(const char *, const char *) __pure; ^~~~~~ sdpdemo.c: At top level: sdpdemo.c:53:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] main() ^~~~ mv -f .deps/sdpdemo.Tpo .deps/sdpdemo.Po --- sdpdemo --- cc -I../../src -pipe -O2 -fno-strict-aliasing -W -Wall -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -Wbad-function-cast -Wcast-qual -Wmissing-declarations -L../../src -o sdpdemo sdpdemo.o -luclmmbase Making all in libbeacon --- ./Makefile.in --- --- beacon.o --- depbase=`echo beacon.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; cc -DHAVE_CONFIG_H -I. -I.. -I../common/src -fPIC -Wall -Wmissing-prototypes -Wstrict-prototypes -pipe -O2 -fno-strict-aliasing -MT beacon.o -MD -MP -MF $depbase.Tpo -c -o beacon.o beacon.c && mv -f $depbase.Tpo $depbase.Po --- ./Makefile.in --- --- am--refresh --- --- Makefile --- --- am--refresh --- --- libbeacon.a --- rm -f libbeacon.a ar cru libbeacon.a beacon.o /usr/libexec/binutils227/elf/ar: `u' modifier ignored since `D' is the default (see `U') ranlib libbeacon.a Making all in Net-Multicast-Beacon --- ./Makefile.in --- --- Makefile.perl --- test -e Makefile.PL || cp ./Makefile.PL . test -e beacon_wrap.c || cp ./beacon_wrap.c . test -e Beacon.pm || cp ./Beacon.pm . test -e beacon.h || cp ../libbeacon/beacon.h . CC=cc CFLAGS="-I../common/src -I../Net-Multicast-Beacon -pipe -O2 -fno-strict-aliasing @LASSO_CORE_CFLAGS@ " /usr/local/bin/perl ./Makefile.PL MAKEFILE=Makefile.perl PREFIX=/usr/local INC="-I../common/src -I../Net-Multicast-Beacon" --- ./Makefile.in --- --- am--refresh --- --- Makefile --- --- am--refresh --- --- Makefile.perl --- Warning: -L../common/src changed to -L/construction/net/beacon/beacon-1.4/Net-Multicast-Beacon/../common/src Warning: -L../libbeacon changed to -L/construction/net/beacon/beacon-1.4/Net-Multicast-Beacon/../libbeacon Warning (mostly harmless): No library found for -lnsl Warning (mostly harmless): No library found for -lresolv Generating a Unix-style Makefile.perl Writing Makefile.perl for Net::Multicast::Beacon Writing MYMETA.yml and MYMETA.json --- build-perl-stamp --- /usr/bin/make build-perl && touch build-perl-stamp --- -perl --- target=`echo -perl | sed -e 's/-perl//'`; /usr/bin/make -f Makefile.perl $target --- blib/lib/Net/Multicast/.exists --- --- blib/arch/.exists --- --- blib/lib/auto/Net/Multicast/Beacon/.exists --- --- blib/arch/auto/Net/Multicast/Beacon/.exists --- --- blib/bin/.exists --- --- blib/script/.exists --- --- blib/man1/.exists --- --- blib/man3/.exists --- --- config --- --- subdirs --- --- dynamic --- --- Beacon.bs --- Running Mkbootstrap for Beacon () --- beacon_wrap.o --- --- pm_to_blib --- --- beacon_wrap.o --- cc -c -I../common/src -I../Net-Multicast-Beacon -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -DUSE_THREAD_SAFE_LOCALE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_FORTIFY_SOURCE=2 -pipe -O2 -fno-strict-aliasing -DVERSION=\"\" -DXS_VERSION=\"\" -DPIC -fPIC "-I/usr/local/lib/perl5/5.30/mach/CORE" -D_GNU_SOURCE beacon_wrap.c --- blibdirs --- --- config --- --- Beacon.bs --- chmod 644 "Beacon.bs" --- blib/arch/auto/Net/Multicast/Beacon/Beacon.bs --- "/usr/local/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Beacon.bs blib/arch/auto/Net/Multicast/Beacon/Beacon.bs 644 --- pm_to_blib --- cp Beacon.pm blib/lib/Net/Multicast/Beacon.pm --- beacon_wrap.o --- In file included from ../common/src/config_unix.h:44, from beacon.h:1, from beacon_wrap.c:796: ../common/src/uclconf.h:107: warning: "VERSION" redefined #define VERSION "1.4" : note: this is the location of the previous definition In file included from beacon.h:1, from beacon_wrap.c:796: ../common/src/config_unix.h:166: warning: "assert" redefined #define assert(x) if ((x) == 0) fprintf(stderr, "%s:%u: failed assertion\n", __FILE__, __LINE__) In file included from /usr/local/lib/perl5/5.30/mach/CORE/perl.h:3426, from beacon_wrap.c:291: /usr/include/assert.h:51: note: this is the location of the previous definition #define assert(e) ((void)0) --- blib/arch/auto/Net/Multicast/Beacon/Beacon.so --- rm -f blib/arch/auto/Net/Multicast/Beacon/Beacon.so cc -shared -L/usr/local/lib/perl5/5.30/mach/CORE -lperl -L/usr/local/lib -fstack-protector-strong beacon_wrap.o -o blib/arch/auto/Net/Multicast/Beacon/Beacon.so -L/construction/net/beacon/beacon-1.4/Net-Multicast-Beacon/../common/src -luclmmbase -L/construction/net/beacon/beacon-1.4/Net-Multicast-Beacon/../libbeacon -lbeacon chmod 755 blib/arch/auto/Net/Multicast/Beacon/Beacon.so --- dynamic --- --- linkext --- --- pure_all --- --- manifypods --- --- all --- --- makemakerdflt --- Making all in src --- ./Makefile.in --- --- beacon --- cd .. && /bin/sh ./config.status src/beacon --- ./Makefile.in --- --- am--refresh --- --- Makefile --- --- am--refresh --- --- beacon --- config.status: creating src/beacon --- ./Makefile.in --- --- config.h --- --- ./Makefile.in --- cd . && /bin/sh /construction/net/beacon/beacon-1.4/config/missing --run automake-1.11 --gnu /construction/net/beacon/beacon-1.4/config/missing: automake-1.11: not found WARNING: `automake-1.11' is missing on your system. You should only need it if you modified `Makefile.am', `acinclude.m4' or `configure.ac'. You might want to install the `Automake' and `Perl' packages. Grab them from any GNU archive site. --- Makefile --- /bin/sh ./config.status config.status: creating Makefile config.status: creating Net-Multicast-Beacon/Makefile config.status: creating libbeacon/Makefile config.status: creating src/FreeBSD/beacon config.status: creating src/Makefile config.status: creating src/beacon config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands SUCCEEDED 00:00:19 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- ===> beacon-1.4_4 depends on package: perl5>=5.30.r1<5.31 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for beacon-1.4_4 ===> beacon-1.4_4 depends on package: perl5>=5.30.r1<5.31 - found ===> Generating temporary packing list Making install in common Making install in src /usr/bin/make install-am cd .. && /bin/sh ./config.status src/Makefile depfiles config.status: creating src/Makefile config.status: executing depfiles commands Making install in tests cd .. && /bin/sh ./config.status tests/Makefile depfiles config.status: creating tests/Makefile config.status: executing depfiles commands Making install in examples Making install in rtp cd ../.. && /bin/sh ./config.status examples/rtp/Makefile depfiles config.status: creating examples/rtp/Makefile config.status: executing depfiles commands Making install in sap cd ../.. && /bin/sh ./config.status examples/sap/Makefile depfiles config.status: creating examples/sap/Makefile config.status: executing depfiles commands Making install in sdp cd ../.. && /bin/sh ./config.status examples/sdp/Makefile depfiles config.status: creating examples/sdp/Makefile config.status: executing depfiles commands cd .. && /bin/sh ./config.status examples/Makefile config.status: creating examples/Makefile cd . && /bin/sh ./config.status Makefile config.status: creating Makefile Making install in libbeacon Making install in Net-Multicast-Beacon /usr/bin/make -f Makefile.perl install "/usr/local/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Beacon.bs blib/arch/auto/Net/Multicast/Beacon/Beacon.bs 644 Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /construction/net/beacon/stage/usr/local/lib/perl5/site_perl/mach/5.30/auto/Net/Multicast/Beacon/Beacon.so Installing /construction/net/beacon/stage/usr/local/lib/perl5/site_perl/mach/5.30/Net/Multicast/Beacon.pm Appending installation info to /construction/net/beacon/stage/usr/local/lib/perl5/5.30/mach/perllocal.pod Making install in src test -z "/usr/local/bin" || ../config/install-sh -c -d "/construction/net/beacon/stage/usr/local/bin" /usr/bin/install -c beacon '/construction/net/beacon/stage/usr/local/bin' install: beacon.conf -> /construction/net/beacon/stage/usr/local/etc/beacon.conf.sample install: beacon.conf -> /construction/net/beacon/stage/usr/local/etc/beacon.conf install: FreeBSD/beacon -> /construction/net/beacon/stage/usr/local/etc/rc.d/beacon /usr/bin/strip /construction/net/beacon/stage/usr/local/lib/perl5/site_perl/mach/5.30/auto/Net/Multicast/Beacon/Beacon.so install -m 0644 /construction/net/beacon/beacon-1.4/README /construction/net/beacon/stage/usr/local/share/doc/beacon ====> Compressing man pages (compress-man) ====> Running Q/A tests (stage-qa) Notice: You have some Perl modules as dependencies but you do not have devel/p5-Module-CoreList installed, the perlcore QA check gets better results when using it, especially with older Perl versions. Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks SUCCEEDED 00:00:05 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for beacon-1.4_4 file sizes/checksums [7]: 0% file sizes/checksums [7]: 100% packing files [7]: 0% packing files [7]: 100% packing directories [0]: 0% packing directories [0]: 100% SUCCEEDED 00:00:00 TOTAL TIME 00:00:37