------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/freetype2-2.10.1.txz ===== Message from freetype2-2.10.1: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). Installing /packages/All/jpeg-turbo-2.0.4.txz Installing /packages/All/expat-2.2.8.txz Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/libffi-3.2.1_3.txz Installing /packages/All/libxml2-2.9.10.txz Installing /packages/All/wayland-1.16.0.txz Installing /packages/All/pciids-20200222.txz Installing /packages/All/libpciaccess-0.16.txz Installing /packages/All/libdrm-2.4.100.txz Installing /packages/All/gettext-runtime-0.20.1.txz Installing /packages/All/libelf-0.8.13_3.txz Installing /packages/All/libXau-1.0.9.txz Installing /packages/All/libpthread-stubs-0.4.txz Installing /packages/All/xorgproto-2019.2.txz Installing /packages/All/libXdmcp-1.1.3.txz Installing /packages/All/libxcb-1.13.1.txz Installing /packages/All/libX11-1.6.9,1.txz Installing /packages/All/libXfixes-5.0.3_2.txz Installing /packages/All/libXdamage-1.1.5.txz Installing /packages/All/libXext-1.3.4,1.txz Installing /packages/All/libXrender-0.9.10_2.txz Installing /packages/All/libXrandr-1.5.2.txz Installing /packages/All/libxshmfence-1.3.txz Installing /packages/All/libXxf86vm-1.1.4_3.txz Installing /packages/All/mesa-libs-18.3.2_4.txz Installing /packages/All/libGLU-9.0.1.txz Installing /packages/All/libICE-1.0.10,1.txz Installing /packages/All/libXi-1.7.10,1.txz Installing /packages/All/freeglut-3.0.0_2.txz ===== Message from freeglut-3.0.0_2: -- Joystick support is untested and it is unknown if it works. Do not hesitate to contact x11@FreeBSD.org if this causes issues. Installing /packages/All/libSM-1.2.3,1.txz Installing /packages/All/libXt-1.2.0,1.txz Installing /packages/All/libXmu-1.1.3,1.txz Installing /packages/All/jasper-2.0.16_1.txz Installing /packages/All/jbigkit-2.1_1.txz Installing /packages/All/tiff-4.1.0.txz Installing /packages/All/lcms2-2.9.txz Installing /packages/All/png-1.6.37.txz Installing /packages/All/giflib-5.2.1.txz Installing /packages/All/webp-1.1.0.txz Installing /packages/All/libwmf-0.2.8.4_15.txz Installing /packages/All/GraphicsMagick-1.3.35,1.txz Installing /packages/All/hwloc-1.11.11.txz Installing /packages/All/gmp-6.2.0.txz Installing /packages/All/mpfr-4.0.2.txz Installing /packages/All/mpc-1.1.0_2.txz UNFLAVORED devel/binutils -> use devel/binutils@native Installing /packages/All/binutils-2.33.1_2,1.txz Installing /packages/All/gcc8-8.4.0.txz ===== Message from gcc8-8.4.0: -- To ensure binaries built with this toolchain find appropriate versions of the necessary run-time libraries, you may want to link using -Wl,-rpath=/usr/local/lib/gcc8 For ports leveraging USE_GCC, USES=compiler, or USES=fortran this happens transparently. Installing /packages/All/perl5-5.30.1.txz ===== Message from perl5-5.30.1: -- The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Installing /packages/All/mpich-3.2.1_6.txz ===== Message from mpich-3.2.1_6: -- ===> NOTICE: The mpich port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/blas-3.5.0_6.txz Installing /packages/All/lapack-3.5.0_8.txz Installing /packages/All/arpack-ng-3.7.0.49.txz Installing /packages/All/libnghttp2-1.40.0.txz Installing /packages/All/ca_root_nss-3.51.txz ===== Message from ca_root_nss-3.51: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/openssl-1.1.1d,1.txz Installing /packages/All/curl-7.68.0.txz Installing /packages/All/fftw3-3.3.8_5.txz Installing /packages/All/fftw3-float-3.3.8_5.txz Installing /packages/All/fontconfig-2.12.6,1.txz Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded Installing /packages/All/libXcursor-1.2.0.txz Installing /packages/All/libXft-2.3.3.txz Installing /packages/All/libXinerama-1.1.4_2,1.txz Installing /packages/All/fltk-1.3.5.txz Installing /packages/All/ftgl-2.1.3.r5_6,1.txz Installing /packages/All/hdf-szip-2.1.1.txz Installing /packages/All/hdf5-1.10.6.txz Installing /packages/All/pcre-8.43_2.txz Installing /packages/All/qhull5-1.0_3.txz Installing /packages/All/qrupdate-1.1.2_11.txz Installing /packages/All/metis-5.1.0_8.txz Installing /packages/All/tbb-2020.1.txz Installing /packages/All/openblas-0.3.7_2,1.txz Installing /packages/All/suitesparse-5.4.0_5.txz Installing /packages/All/glpk-4.65.txz Installing /packages/All/gl2ps-1.4.0.txz Installing /packages/All/libosmesa-18.3.2_6.txz Installing /packages/All/sundials-3.1.2_9.txz Installing /packages/All/portaudio-19.6.0_3,1.txz Installing /packages/All/icu-66.1,1.txz Installing /packages/All/pcre2-10.34.txz Installing /packages/All/libiconv-1.14_11.txz Installing /packages/All/ncurses-6.1.20190525.txz Installing /packages/All/readline-8.0.4.txz Installing /packages/All/python37-3.7.6.txz ===== Message from python37-3.7.6: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py37-gdbm databases/py-gdbm@py37 py37-sqlite3 databases/py-sqlite3@py37 py37-tkinter x11-toolkits/py-tkinter@py37 Installing /packages/All/glib-2.56.3_7,1.txz No schema files found: doing nothing. Installing /packages/All/qtchooser-66_1.txz ===== Message from qtchooser-66_1: -- qtchooser is a wrapper that allows selecting whether Qt4 or Qt5 binaries for qmake, moc and other tools will be run when invoking the binaries in $PATH. By default, the Qt5 versions are run. It is possible to change the behavior by setting the QT_SELECT environment variable to "qt4". See qtchooser(1) for more information. Installing /packages/All/qt5-core-5.13.2_2.txz Removing qtchooser links done Creating qtchooser links /usr/local/bin/qlalr done Installing /packages/All/dbus-1.12.16.txz ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. Installing /packages/All/libevdev-1.5.9.txz Installing /packages/All/graphite2-1.3.13_1.txz Installing /packages/All/harfbuzz-2.6.4.txz Installing /packages/All/libudev-devd-0.4.1.txz Installing /packages/All/libmtdev-1.1.5_2.txz Installing /packages/All/py37-setuptools-44.0.0.txz Installing /packages/All/py37-evdev-0.8.1_1.txz Installing /packages/All/py37-six-1.14.0.txz Installing /packages/All/py37-pyudev-0.21.0.txz Installing /packages/All/libinput-1.12.6_1.txz Installing /packages/All/xcb-util-0.4.0_2,1.txz Installing /packages/All/xcb-util-image-0.4.0_1.txz Installing /packages/All/xcb-util-keysyms-0.4.0_1.txz Installing /packages/All/xcb-util-renderutil-0.3.9_1.txz Installing /packages/All/xcb-util-wm-0.4.1_3.txz Installing /packages/All/xkeyboard-config-2.27.txz Installing /packages/All/libxkbcommon-0.10.0.txz Installing /packages/All/qt5-dbus-5.13.2_1.txz Removing qtchooser links done Creating qtchooser links /usr/local/bin/qdbuscpp2xml /usr/local/bin/qdbusxml2cpp done Installing /packages/All/qt5-network-5.13.2.txz Installing /packages/All/hicolor-icon-theme-0.17.txz Installing /packages/All/xprop-1.2.4.txz Installing /packages/All/xset-1.2.4_3.txz Installing /packages/All/xdg-utils-1.1.3_1.txz Installing /packages/All/vulkan-headers-1.1.108.0.txz Installing /packages/All/encodings-1.0.5,1.txz Installing /packages/All/libfontenc-1.1.4.txz Installing /packages/All/mkfontscale-1.2.1.txz Installing /packages/All/font-bh-ttf-1.0.3_4.txz Installing /packages/All/font-misc-meltho-1.0.3_4.txz Installing /packages/All/font-misc-ethiopic-1.0.3_4.txz Installing /packages/All/dejavu-2.37_1.txz ===== Message from dejavu-2.37_1: -- Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Installing /packages/All/xorg-fonts-truetype-7.7_1.txz Installing /packages/All/qt5-gui-5.13.2_3.txz Removing qtchooser links done Creating qtchooser links /usr/local/bin/qvkgen done Installing /packages/All/libdaemon-0.14_1.txz Installing /packages/All/dbus-glib-0.110.txz Installing /packages/All/gdbm-1.18.1_1.txz Installing /packages/All/gobject-introspection-1.56.1,1.txz Installing /packages/All/gnome_subr-1.0.txz Installing /packages/All/avahi-app-0.7_2.txz ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. Installing /packages/All/nettle-3.5.1_1.txz Installing /packages/All/libtasn1-4.15.0.txz Installing /packages/All/libunistring-0.9.10_1.txz Installing /packages/All/libidn2-2.3.0_1.txz Installing /packages/All/p11-kit-0.23.18.1.txz Installing /packages/All/tpm-emulator-0.7.4_2.txz ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. Installing /packages/All/trousers-0.3.14_2.txz ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. ===== Message from trousers-0.3.14_2: -- To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Installing /packages/All/gnutls-3.6.12.txz Installing /packages/All/libpaper-1.1.24.4.txz Installing /packages/All/cups-2.2.13.txz ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. Installing /packages/All/qt5-widgets-5.13.2_1.txz Removing qtchooser links done Creating qtchooser links /usr/local/bin/uic done Installing /packages/All/qt5-printsupport-5.13.2.txz Installing /packages/All/qscintilla2-qt5-2.11.2_1.txz Installing /packages/All/qt5-sql-5.13.2.txz ===== Message from qt5-sql-5.13.2: -- To enable Qt database support, install the database plugin ports. The following plugin ports are available: - databases/qt5-sqldrivers-ibase InterBase/Firebird - databases/qt5-sqldrivers-mysql MySQL - databases/qt5-sqldrivers-odbc Open Database Connectivity - databases/qt5-sqldrivers-pgsql PostgreSQL - databases/qt5-sqldrivers-sqlite2 SQLite 2 - databases/qt5-sqldrivers-sqlite3 SQLite 3 - databases/qt5-sqldrivers-tds FreeTDS Installing /packages/All/sqlite3-3.30.1_1,1.txz Installing /packages/All/qt5-sqldrivers-sqlite3-5.13.2.txz Installing /packages/All/qt5-help-5.13.2_1.txz Removing qtchooser links done Creating qtchooser links /usr/local/bin/qcollectiongenerator /usr/local/bin/qhelpgenerator done Installing /packages/All/qt5-opengl-5.13.2.txz Installing /packages/All/qt5-xml-5.13.2.txz Installing /packages/All/libgd-2.2.5_2,1.txz Installing /packages/All/tex-kpathsea-6.2.1_2.txz Installing /packages/All/atk-2.28.1.txz Installing /packages/All/pixman-0.38.4.txz Installing /packages/All/cairo-1.16.0,2.txz Installing /packages/All/shared-mime-info-1.10_2.txz Installing /packages/All/gdk-pixbuf2-2.40.0.txz Installing /packages/All/fribidi-0.19.7.txz Installing /packages/All/pango-1.42.4_3.txz Installing /packages/All/libXcomposite-0.4.5,1.txz Installing /packages/All/gtk-update-icon-cache-2.24.32.txz Installing /packages/All/gtk2-2.24.32.txz Installing /packages/All/libedit-3.1.20191211,1.txz Installing /packages/All/lua53-5.3.5_3.txz Installing /packages/All/libmspack-0.10.1.txz Installing /packages/All/nspr-4.25.txz Installing /packages/All/spidermonkey60-60.9.0_2.txz Installing /packages/All/polkit-0.116.txz ===> Creating groups. Creating group 'polkitd' with gid '565'. ===> Creating users Creating user 'polkitd' with uid '565'. Installing /packages/All/dconf-0.28.0.txz Installing /packages/All/libIDL-0.8.14_4.txz Installing /packages/All/ORBit2-2.14.19_2.txz Installing /packages/All/gconf2-3.2.6_5.txz Installing /packages/All/pangox-compat-0.0.2_2.txz Installing /packages/All/gstreamer-0.10.36_6.txz Installing /packages/All/orc-0.4.31.txz Installing /packages/All/libXv-1.0.11_2,1.txz Installing /packages/All/gstreamer-plugins-0.10.36_12,3.txz Installing /packages/All/wx28-gtk2-common-2.8.12_8.txz Installing /packages/All/wx28-gtk2-2.8.12_8.txz Installing /packages/All/gnuplot-5.2.8.txz Installing /packages/All/gsed-4.8.txz Installing /packages/All/p5-Locale-libintl-1.31.txz Installing /packages/All/p5-Text-Unidecode-1.30.txz Installing /packages/All/p5-Unicode-EastAsianWidth-12.0.txz Installing /packages/All/texinfo-6.7_1,1.txz Installing /packages/All/alsa-lib-1.1.2_2.txz ===== Message from alsa-lib-1.1.2_2: -- ===> NOTICE: The alsa-lib port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/javavmwrapper-2.7.4.txz Installing /packages/All/java-zoneinfo-2019.b.txz Installing /packages/All/libXtst-1.2.3_2.txz Installing /packages/All/openjdk8-8.181.13_1.txz ===== Message from openjdk8-8.181.13_1: -- ====================================================================== This OpenJDK implementation requires procfs(5) mounted on /proc. If you have not done it yet, please do the following: mount -t procfs proc /proc To make it permanent, you need the following line in /etc/fstab: proc /proc procfs rw 0 0 ====================================================================== Installing /packages/All/desktop-file-utils-0.24.txz Installing /packages/All/octave-5.2.0.txz Installing /packages/All/gmake-4.2.1_3.txz UNFLAVORED devel/binutils -> use devel/binutils@native Installing /packages/All/libltdl-2.4.6.txz Installing /packages/All/openjpeg-2.3.1.txz Installing /packages/All/liblqr-1-0.4.2.txz ===== Message from liblqr-1-0.4.2: -- NOTE: In order to compile examples for liblqr, you will also need pngwriter port (/xports/graphics/pngwriter). Examples are located in /usr/local/share/examples/liblqr-1 Installing /packages/All/libraqm-0.6.0.txz Installing /packages/All/libraw-0.19.5.txz Installing /packages/All/libgsf-1.14.46.txz Installing /packages/All/libcroco-0.6.13.txz Installing /packages/All/librsvg2-2.40.21.txz Installing /packages/All/gsfonts-8.11_8.txz Installing /packages/All/pkgconf-1.6.3,1.txz Installing /packages/All/libidn-1.35.txz Installing /packages/All/jbig2dec-0.17.txz Installing /packages/All/poppler-data-0.4.9_2.txz Installing /packages/All/ghostscript9-agpl-base-9.50_2.txz ===== Message from ghostscript9-agpl-base-9.50_2: -- This package installs a script named dvipdf that depends on dvips. If you want to use this script you need to install print/tex-dvipsk. Installing /packages/All/ghostscript9-agpl-x11-9.50.txz Installing /packages/All/ImageMagick6-6.9.10.90,1.txz Installing /packages/All/cdf3-3.3.0_13.txz ===== Message from cdf3-3.3.0_13: -- A set of script files named `definitions.' should now exist in the `bin' directory. `' specifies the type of shell (command interpreter) for which the script file was written: `C' (C-shell style), `K' (Korn shell style), or `B' (Bourne shell style). They are script files that a user would execute to set up the environment variables and aliases (where supported) necessary to use CDF. A user would then execute the appropriate script file to define aliases for the toolkit programs and environment variables for the locations of the include files, CDF library, etc. For the Korn, BASH, and POSIX shells, the following command would be used: . /usr/local/bin/definitions.K For the Bourne shell, the following command would be used: . /usr/local/bin/definitions.B For the C and `tcsh' shells, the following command would be used: source /usr/local/bin/definitions.C Because aliases are not available when using the Bourne shell, the toolkit programs must be invoked by specifying the actual name of the executable file. The script file `definitions.B' describes how to do this. Installing /packages/All/netcdf-4.7.3.txz Installing /packages/All/libXpm-3.5.13.txz Installing /packages/All/libXaw-1.0.13_3,2.txz Installing /packages/All/xbitmaps-1.1.2.txz Installing /packages/All/open-motif-2.3.8_1.txz Installing /packages/All/opendx-4.4.4_31.txz ===== Message from opendx-4.4.4_31: -- If you cannot connect to dxexec, try this: # Start the user interface by typing "dx -uionly &" # Start the executive by typing "dx -execonly &" # Use the connect menu in the user interface to "Connect to server", click the Options button, and select connect to already running server. Installing /packages/All/p5-File-Remove-1.58.txz Installing /packages/All/octave-forge-base-1.4_6.txz load-octave-pkg: there are currently no octave packages installed. Installing /packages/All/octave-forge-fpl-1.3.5_13.txz load-octave-pkg: there are currently no octave packages installed. load-octave-pkg: octave is installing fpl-1.3.5.tar.gz. warning: creating installation directory /usr/local/share/octave/packages warning: called from install at line 30 column 5 pkg at line 441 column 9 ===== Message from octave-forge-fpl-1.3.5_13: -- Although the port builds, it is nonfunctional on sparc64 due to the absence of opendx. Installing /packages/All/octave-forge-splines-1.3.3.txz load-octave-pkg: octave is installing splines-1.3.3.tar.gz. Installing /packages/All/tcl86-8.6.10.txz Installing /packages/All/libXScrnSaver-1.2.3_2.txz Installing /packages/All/tk86-8.6.10_1.txz Installing /packages/All/libxkbfile-1.1.0.txz Installing /packages/All/libXres-1.2.0_2.txz Installing /packages/All/cgnslib-4.0.0,1.txz Installing /packages/All/fr-med-4.0.0.txz Installing /packages/All/xmlcatmgr-2.2_2.txz + Creating /usr/local/share/sgml/catalog + Registering CATALOG catalog.ports (SGML) + Creating /usr/local/share/sgml/catalog.ports + Creating /usr/local/share/xml/catalog + Registering nextCatalog catalog.ports (XML) + Creating /usr/local/share/xml/catalog.ports ===== Message from xmlcatmgr-2.2_2: -- The following catalogs are installed: 1) /usr/local/share/sgml/catalog The top level catalog for SGML stuff. It is not changed by any ports/packages except textproc/xmlcatmgr. 2) /usr/local/share/sgml/catalog.ports This catalog is for handling SGML stuff installed under /usr/local/share/sgml. It is changed by ports/packages. 3) /usr/local/share/xml/catalog The top level catalog for XML stuff. It is not changed by any ports/packages except textproc/xmlcatmgr. 4) /usr/local/share/xml/catalog.ports This catalog is for handling XML stuff installed under /usr/local/share/xml. It is changed by ports/packages. Installing /packages/All/libglade2-2.6.4_10.txz Installing /packages/All/python27-2.7.17_1.txz ===== Message from python27-2.7.17_1: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter Installing /packages/All/py27-setuptools-44.0.0.txz ===== Message from py27-setuptools-44.0.0: -- Only /usr/local/bin/easy_install-2.7 script has been installed since Python 2.7 is not the default Python version. Installing /packages/All/py27-numpy-1.16.5_4,1.txz Installing /packages/All/py27-six-1.14.0.txz Installing /packages/All/py27-cycler-0.10.0.txz Installing /packages/All/py27-dateutil-2.8.0.txz Installing /packages/All/py27-pytz-2019.3,1.txz Installing /packages/All/py27-pyparsing-2.4.6.txz Installing /packages/All/py27-futures-3.3.0.txz Installing /packages/All/py27-singledispatch-3.4.0.3_1.txz Installing /packages/All/py27-backports_abc-0.5.txz Installing /packages/All/py27-tornado-5.1.1.txz Installing /packages/All/py27-kiwisolver-1.1.0.txz Installing /packages/All/py27-tkinter-2.7.17_6.txz UNFLAVORED devel/py-gobject -> use devel/py-gobject@py27 Installing /packages/All/py27-cairo-1.18.1_1.txz Installing /packages/All/py27-gobject-2.28.6_8.txz UNFLAVORED x11-toolkits/py-gtk2 -> use x11-toolkits/py-gtk2@py27 UNFLAVORED devel/py-gobject -> use devel/py-gobject@py27 Installing /packages/All/py27-gtk2-2.24.0_5.txz Installing /packages/All/py27-backports-1.txz Installing /packages/All/py27-backports.functools_lru_cache-1.5.txz Installing /packages/All/py27-matplotlib-2.2.4_1.txz Installing /packages/All/vtk6-6.2.0_10.txz Installing /packages/All/aom-1.0.0.3187.txz Installing /packages/All/libass-0.14.0.txz Installing /packages/All/dav1d-0.6.0.txz Installing /packages/All/opencv-core-3.4.1_30.txz ===== Message from opencv-core-3.4.1_30: -- ===> NOTICE: The opencv-core port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/opus-1.3.1.txz Installing /packages/All/libogg-1.3.4,4.txz Installing /packages/All/libvorbis-1.3.6,3.txz Installing /packages/All/libtheora-1.1.1_7.txz Installing /packages/All/libv4l-1.6.3_4.txz Installing /packages/All/libva-2.6.1_1.txz Installing /packages/All/libvdpau-1.3.txz Installing /packages/All/libvpx-1.8.2_1.txz Installing /packages/All/libx264-0.159.2991.txz Installing /packages/All/x265-3.2.1_2.txz Installing /packages/All/xvid-1.3.7,1.txz Installing /packages/All/ffmpeg-4.2.2_9,1.txz Installing /packages/All/freeimage-3.18.0_1.txz ===== Message from freeimage-3.18.0_1: -- ===> NOTICE: The freeimage port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/bash-5.0.16.txz Installing /packages/All/opencascade-7.4.0_1.txz Installing /packages/All/gsl-2.6.txz Installing /packages/All/getdp-3.3.0.txz Installing /packages/All/gmsh-4.5.4.txz Installing /packages/All/octave-forge-msh-1.0.10_15.txz load-octave-pkg: octave is installing msh-1.0.10.tar.gz. Installing /packages/All/octave-forge-bim-1.1.5_13.txz load-octave-pkg: octave is installing bim-1.1.5.tar.gz. UNFLAVORED devel/binutils -> use devel/binutils@native UNFLAVORED devel/binutils -> use devel/binutils@native UNFLAVORED devel/py-gobject -> use devel/py-gobject@py27 UNFLAVORED x11-toolkits/py-gtk2 -> use x11-toolkits/py-gtk2@py27 UNFLAVORED devel/py-gobject -> use devel/py-gobject@py27 SUCCEEDED 00:02:57 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> octave-forge-secs3d-0.0.1_20 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> octave-forge-secs3d-0.0.1_20 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by octave-forge-secs3d-0.0.1_20 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> octave-forge-secs3d-0.0.1_20 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by octave-forge-secs3d-0.0.1_20 for building => SHA256 Checksum OK for octave-forge/secs3d-0.0.1.tar.gz. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> octave-forge-secs3d-0.0.1_20 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by octave-forge-secs3d-0.0.1_20 for building ===> Extracting for octave-forge-secs3d-0.0.1_20 => SHA256 Checksum OK for octave-forge/secs3d-0.0.1.tar.gz. Extracted Memory Use: 0.21M SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for octave-forge-secs3d-0.0.1_20 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> octave-forge-secs3d-0.0.1_20 depends on executable: octave - found ===> octave-forge-secs3d-0.0.1_20 depends on executable: gfortran8 - found ===> octave-forge-secs3d-0.0.1_20 depends on executable: gmake - found ===> octave-forge-secs3d-0.0.1_20 depends on file: /usr/local/bin/as - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- ===> octave-forge-secs3d-0.0.1_20 depends on shared library: libpcre.so - found (/usr/local/lib/libpcre.so) SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> octave-forge-secs3d-0.0.1_20 depends on executable: octave - found ===> octave-forge-secs3d-0.0.1_20 depends on executable: gfortran8 - found ===> octave-forge-secs3d-0.0.1_20 depends on executable: gmake - found ===> octave-forge-secs3d-0.0.1_20 depends on file: /usr/local/bin/as - found ===> octave-forge-secs3d-0.0.1_20 depends on shared library: libpcre.so - found (/usr/local/lib/libpcre.so) ===> Configuring for octave-forge-secs3d-0.0.1_20 SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for octave-forge-secs3d-0.0.1_20 /bin/rm -f /construction/math/octave-forge-secs3d/secs3d-0.0.1/Makefile /construction/math/octave-forge-secs3d/secs3d-0.0.1/configure cd /construction/math/octave-forge-secs3d && /usr/bin/tar cfz secs3d-0.0.1.tar.gz secs3d-0.0.1 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- ===> octave-forge-secs3d-0.0.1_20 depends on file: /usr/local/share/octave/tarballs/fpl.tar.gz - found ===> octave-forge-secs3d-0.0.1_20 depends on file: /usr/local/share/octave/tarballs/bim.tar.gz - found ===> octave-forge-secs3d-0.0.1_20 depends on executable: octave - found ===> octave-forge-secs3d-0.0.1_20 depends on file: /usr/local/libexec/octave/load-octave-pkg - found ===> octave-forge-secs3d-0.0.1_20 depends on executable: gfortran8 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for octave-forge-secs3d-0.0.1_20 ===> octave-forge-secs3d-0.0.1_20 depends on file: /usr/local/share/octave/tarballs/fpl.tar.gz - found ===> octave-forge-secs3d-0.0.1_20 depends on file: /usr/local/share/octave/tarballs/bim.tar.gz - found ===> octave-forge-secs3d-0.0.1_20 depends on executable: octave - found ===> octave-forge-secs3d-0.0.1_20 depends on file: /usr/local/libexec/octave/load-octave-pkg - found ===> octave-forge-secs3d-0.0.1_20 depends on executable: gfortran8 - found ===> Generating temporary packing list /bin/mkdir -p /construction/math/octave-forge-secs3d/stage/usr/local/share/octave/tarballs install -m 0644 /construction/math/octave-forge-secs3d/secs3d-0.0.1.tar.gz /construction/math/octave-forge-secs3d/stage/usr/local/share/octave/tarballs/. ln -s -f secs3d-0.0.1.tar.gz /construction/math/octave-forge-secs3d/stage/usr/local/share/octave/tarballs/secs3d.tar.gz ====> Compressing man pages (compress-man) ====> Running Q/A tests (stage-qa) Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for octave-forge-secs3d-0.0.1_20 file sizes/checksums [2]: 0% file sizes/checksums [2]: 100% packing files [2]: 0% packing files [2]: 100% packing directories [0]: 0% packing directories [0]: 100% SUCCEEDED 00:00:00 TOTAL TIME 00:02:58