------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/libnghttp2-1.40.0.txz Installing /packages/All/ca_root_nss-3.51.txz ===== Message from ca_root_nss-3.51: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/openssl-1.1.1d,1.txz Installing /packages/All/curl-7.68.0.txz Installing /packages/All/expat-2.2.8.txz Installing /packages/All/jsoncpp-1.9.2.txz Installing /packages/All/libuv-1.35.0.txz Installing /packages/All/rhash-1.3.5.txz Installing /packages/All/liblz4-1.9.2_1,1.txz Installing /packages/All/lzo2-2.10_1.txz Installing /packages/All/libarchive-3.4.2,1.txz Installing /packages/All/ncurses-6.1.20190525.txz Installing /packages/All/cmake-3.16.5.txz SUCCEEDED 00:00:08 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> eigen2-2.0.17,1 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> eigen2-2.0.17,1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by eigen2-2.0.17,1 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> eigen2-2.0.17,1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by eigen2-2.0.17,1 for building => SHA256 Checksum OK for eigen/2.0.17.tar.bz2. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> eigen2-2.0.17,1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by eigen2-2.0.17,1 for building ===> Extracting for eigen2-2.0.17,1 => SHA256 Checksum OK for eigen/2.0.17.tar.bz2. Extracted Memory Use: 3.54M SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for eigen2-2.0.17,1 SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> eigen2-2.0.17,1 depends on file: /usr/local/bin/cmake - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> eigen2-2.0.17,1 depends on file: /usr/local/bin/cmake - found ===> Configuring for eigen2-2.0.17,1 ===> Performing out-of-source build /bin/mkdir -p /construction/math/eigen2/.build -- The C compiler identification is GNU 8.3.0 -- The CXX compiler identification is GNU 8.3.0 -- Check for working C compiler: /usr/bin/cc -- Check for working C compiler: /usr/bin/cc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Detecting CXX compile features -- Detecting CXX compile features - done -- Performing Test standard_math_library_linked_to_automatically -- Performing Test standard_math_library_linked_to_automatically - Success -- Standard libraries to link to explicitly: none CMake Warning (dev) at doc/examples/CMakeLists.txt:11 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "Tutorial_simple_example_dynamic_size". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/examples/CMakeLists.txt:11 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "Tutorial_simple_example_fixed_size". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/examples/CMakeLists.txt:11 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "class_Block". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/examples/CMakeLists.txt:11 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "class_CwiseBinaryOp". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/examples/CMakeLists.txt:11 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "class_CwiseUnaryOp". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/examples/CMakeLists.txt:11 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "class_FixedBlock". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_AngleAxis_mimic_euler". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_abs". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_abs2". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_cos". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_cube". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_equal_equal". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_exp". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_greater". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_greater_equal". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_inverse". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_less". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_less_equal". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_log". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_max". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_min". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_minus". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_minus_equal". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_not_equal". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_plus". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_plus_equal". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_pow". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_product". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_quotient". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_sin". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_slash_equal". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_sqrt". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_square". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Cwise_times_equal". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_IOFormat". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_LLT_solve". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_LU_computeImage". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_LU_computeKernel". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_LU_image". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_LU_kernel". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_LU_solve". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_adjoint". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_all". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_asDiagonal". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_block_int_int". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_block_int_int_int_int". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_cast". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_col". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_colwise". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_computeInverse". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_corner_enum_int_int". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_cwise". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_cwise_const". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_diagonal". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_end_int". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_eval". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_extract". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_fixedBlock_int_int". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_identity". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_identity_int_int". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_inverse". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_isDiagonal". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_isIdentity". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_isOnes". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_isOrthogonal". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_isUnitary". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_isZero". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_lazy". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_marked". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_minor". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_ones". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_ones_int". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_ones_int_int". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_part". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_random". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_random_int". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_random_int_int". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_row". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_rowwise". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_segment_int_int". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_set". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_setIdentity". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_setOnes". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_setRandom". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_setZero". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_start_int". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_template_int_end". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_template_int_int_corner_enum". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_template_int_segment". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_template_int_start". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_transpose". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_zero". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_zero_int". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_MatrixBase_zero_int_int". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_PartialRedux_count". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_PartialRedux_maxCoeff". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_PartialRedux_minCoeff". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_PartialRedux_norm". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_PartialRedux_squaredNorm". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_PartialRedux_sum". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Tutorial_commainit_01". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_Tutorial_commainit_02". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning (dev) at doc/snippets/CMakeLists.txt:17 (GET_TARGET_PROPERTY): Policy CMP0026 is not set: Disallow use of the LOCATION target property. Run "cmake --help-policy CMP0026" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The LOCATION property should not be read from target "compile_class_LU". Use the target name directly with add_custom_command, or use the generator expression $, as appropriate. This warning is for project developers. Use -Wno-dev to suppress it. -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: CMAKE_CXX_FLAGS_DEBUG CMAKE_C_FLAGS_DEBUG CMAKE_C_FLAGS_RELEASE CMAKE_MODULE_LINKER_FLAGS CMAKE_NO_BUILTIN_CHRPATH CMAKE_SHARED_LINKER_FLAGS THREADS_HAVE_PTHREAD_ARG -- Build files have been written to: /construction/math/eigen2/.build SUCCEEDED 00:00:03 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for eigen2-2.0.17,1 /usr/local/bin/cmake -S/construction/math/eigen2/eigen-eigen-b23437e61a07 -B/construction/math/eigen2/.build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/local/bin/cmake -E cmake_progress_start /construction/math/eigen2/.build/CMakeFiles /construction/math/eigen2/.build/CMakeFiles/progress.marks /usr/bin/make -f CMakeFiles/Makefile2 all /usr/local/bin/cmake -E cmake_progress_start /construction/math/eigen2/.build/CMakeFiles 0 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for eigen2-2.0.17,1 ===> Generating temporary packing list /usr/local/bin/cmake -S/construction/math/eigen2/eigen-eigen-b23437e61a07 -B/construction/math/eigen2/.build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/local/bin/cmake -E cmake_progress_start /construction/math/eigen2/.build/CMakeFiles /construction/math/eigen2/.build/CMakeFiles/progress.marks /usr/bin/make -f CMakeFiles/Makefile2 all /usr/local/bin/cmake -E cmake_progress_start /construction/math/eigen2/.build/CMakeFiles 0 /usr/bin/make -f CMakeFiles/Makefile2 preinstall Installing the project stripped... /usr/local/bin/cmake -DCMAKE_INSTALL_DO_STRIP=1 -P cmake_install.cmake -- Install configuration: "Release" -- Installing: /construction/math/eigen2/stage/usr/local/libdata/pkgconfig/eigen2.pc -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/Core -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/LU -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/Cholesky -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/QR -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/Geometry -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/Sparse -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/Array -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/SVD -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/LeastSquares -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/QtAlignedMalloc -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/StdVector -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/NewStdVector -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/Eigen -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/Dense -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Assign.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Block.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/CacheFriendlyProduct.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Coeffs.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/CommaInitializer.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Cwise.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/CwiseBinaryOp.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/CwiseNullaryOp.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/CwiseUnaryOp.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/DiagonalCoeffs.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/DiagonalMatrix.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/DiagonalProduct.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Dot.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Flagged.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Functors.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Fuzzy.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/GenericPacketMath.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/IO.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Map.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/MapBase.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/MathFunctions.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Matrix.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/MatrixBase.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/MatrixStorage.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Minor.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/NestByValue.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/NumTraits.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Part.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Product.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Redux.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/SolveTriangular.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Sum.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Swap.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Transpose.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/Visitor.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/util/Constants.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/util/DisableMSVCWarnings.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/util/EnableMSVCWarnings.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/util/ForwardDeclarations.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/util/Macros.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/util/Memory.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/util/Meta.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/util/StaticAssert.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/util/XprHelper.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/arch/SSE/PacketMath.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Core/arch/AltiVec/PacketMath.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/LU/Determinant.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/LU/Inverse.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/LU/LU.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/QR/EigenSolver.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/QR/HessenbergDecomposition.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/QR/QR.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/QR/SelfAdjointEigenSolver.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/QR/Tridiagonalization.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/SVD/SVD.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Cholesky/LDLT.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Cholesky/LLT.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Array/BooleanRedux.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Array/CwiseOperators.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Array/Functors.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Array/Norms.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Array/PartialRedux.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Array/Random.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Array/Select.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Geometry/AlignedBox.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Geometry/AngleAxis.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Geometry/EulerAngles.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Geometry/Hyperplane.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Geometry/OrthoMethods.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Geometry/ParametrizedLine.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Geometry/Quaternion.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Geometry/Rotation2D.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Geometry/RotationBase.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Geometry/Scaling.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Geometry/Transform.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Geometry/Translation.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/LeastSquares/LeastSquares.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/AmbiVector.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/CholmodSupport.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/CompressedStorage.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/CoreIterators.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/DynamicSparseMatrix.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/MappedSparseMatrix.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/RandomSetter.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseAssign.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseBlock.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseCwise.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseCwiseBinaryOp.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseCwiseUnaryOp.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseDiagonalProduct.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseDot.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseFlagged.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseFuzzy.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseLDLT.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseLLT.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseLU.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseMatrix.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseMatrixBase.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseProduct.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseRedux.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseTranspose.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseUtil.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SparseVector.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/SuperLUSupport.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/TaucsSupport.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/TriangularSolver.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/Eigen/src/Sparse/UmfPackSupport.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/unsupported/Eigen/IterativeSolvers -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/unsupported/Eigen/src/IterativeSolvers/ConstrainedConjGrad.h -- Installing: /construction/math/eigen2/stage/usr/local/include/eigen2/unsupported/Eigen/src/IterativeSolvers/IterationController.h ====> Compressing man pages (compress-man) ====> Running Q/A tests (stage-qa) Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for eigen2-2.0.17,1 file sizes/checksums [125]: 0% file sizes/checksums [125]: 80% file sizes/checksums [125]: 100% packing files [125]: 0% packing files [125]: 80% packing files [125]: 100% packing directories [0]: 0% packing directories [0]: 100% SUCCEEDED 00:00:02 TOTAL TIME 00:00:16