------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/libmspack-0.10.1.txz pkg: Cannot runscript POST-INSTALL:Bad file descriptor Installing /packages/All/libltdl-2.4.6.txz pkg: Cannot runscript POST-INSTALL:Bad file descriptor Installing /packages/All/libnghttp2-1.40.0.txz pkg: Cannot runscript POST-INSTALL:Bad file descriptor Installing /packages/All/ca_root_nss-3.51.txz pkg: Cannot runscript POST-INSTALL:Bad file descriptor ===== Message from ca_root_nss-3.51: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/openssl-1.1.1d,1.txz pkg: Cannot runscript POST-INSTALL:Bad file descriptor Installing /packages/All/curl-7.68.0.txz pkg: Cannot runscript POST-INSTALL:Bad file descriptor Installing /packages/All/json-c-0.13.1_1.txz pkg: Cannot runscript POST-INSTALL:Bad file descriptor Installing /packages/All/libmilter-8.15.2_1.txz pkg: Cannot runscript POST-INSTALL:Bad file descriptor Installing /packages/All/pcre2-10.34.txz pkg: Cannot runscript POST-INSTALL:Bad file descriptor Installing /packages/All/libxml2-2.9.10.txz pkg: Cannot runscript POST-INSTALL:Bad file descriptor Installing /packages/All/arc-5.21p.txz Installing /packages/All/arj-3.10.22_8.txz Installing /packages/All/unzoo-4.4_2.txz Installing /packages/All/ncurses-6.1.20190525.txz pkg: Cannot runscript POST-INSTALL:Bad file descriptor Installing /packages/All/clamav-0.102.2,1.txz pkg: Cannot runscript PRE-INSTALL:Bad file descriptor pkg: Cannot runscript POST-INSTALL:Bad file descriptor Installing /packages/All/ripmime-1.4.0.10.txz ===== Message from ripmime-1.4.0.10: -- You have installed RipMIME, a utility to extract attachments from MIME-encoded email messages. If you have an MIME encoded archive (say from sendmail's output) called recvmail001.mime and you wish to unpack it to a directory (which already exists) called "/var/tmp/unpack", then you would type: ripmime -i recvmail001.mime -d /var/tmp/unpack Installing /packages/All/netqmail-1.06_4.txz pkg: Cannot runscript PRE-INSTALL:Bad file descriptor pkg: Cannot runscript POST-INSTALL:Bad file descriptor ===== Message from netqmail-1.06_4: -- ATTENTION: You can enable qmail as your default mailer executing: > /var/qmail/scripts/enable-qmail SUCCEEDED 00:00:02 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- ===> NOTICE: The simscan port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> simscan-1.4.0_8 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> NOTICE: The simscan port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> simscan-1.4.0_8 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by simscan-1.4.0_8 for building SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> NOTICE: The simscan port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> simscan-1.4.0_8 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by simscan-1.4.0_8 for building => SHA256 Checksum OK for simscan-1.4.0.tar.gz. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> NOTICE: The simscan port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> simscan-1.4.0_8 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by simscan-1.4.0_8 for building ===> Extracting for simscan-1.4.0_8 => SHA256 Checksum OK for simscan-1.4.0.tar.gz. Extracted Memory Use: 1.36M SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for simscan-1.4.0_8 ===> Applying ports patches for simscan-1.4.0_8 ===> Applying dragonfly patches for simscan-1.4.0_8 SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> simscan-1.4.0_8 depends on executable: clamdscan - found ===> simscan-1.4.0_8 depends on executable: ripmime - found ===> simscan-1.4.0_8 depends on file: /var/qmail/bin/qmail-send - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> simscan-1.4.0_8 depends on executable: clamdscan - found ===> simscan-1.4.0_8 depends on executable: ripmime - found ===> simscan-1.4.0_8 depends on file: /var/qmail/bin/qmail-send - found ===> Configuring for simscan-1.4.0_8 =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~= You may also use the following build options: QMAIL_PREFIX Base qmail directory. Default is /var/qmail WORKDIR Directory to unpack emails. Default is /var/qmail/simscan QMAIL_QUEUE Define full path and name of the qmail-queue program Incoming mail is passed to this program after being scanned by SimScan. Default is /var/qmail/bin/qmail-queue SPAMC_ARGS Define the arguments to pass to spamc. Be sure to place quotes around the options you define SPAM_HITS Reject spam only above this hit level Default is 10.0. Useful without PASSTHRU option QUARANTINE_DIR Directory to keep spam and/or infected emails Default is disabled =~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~= configure: loading site script /xports/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... (cached) /usr/bin/awk checking whether make sets $(MAKE)... yes checking build system type... x86_64-portbld-dragonfly5.9 checking host system type... x86_64-portbld-dragonfly5.9 checking for style of include used by make... GNU checking for gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking dependency style of cc... none checking for strsep... (cached) yes checking for gcc... (cached) cc checking whether we are using the GNU C compiler... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to accept ANSI C... (cached) none needed checking dependency style of cc... (cached) none checking whether the nobody user exists... yes checking whether we can locate the clamdscan program... yes checking whether we can locate the qmail directory... yes checking setting the work directory... done checking setting the control directory... done checking whether we can locate the qmail-queue program... yes checking enable the regex scanner... no checking whether system has nproc ulimit... yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands Current settings --------------------------------------- user = nobody qmail directory = /var/qmail work directory = /var/qmail/simscan control directory = /var/qmail/control qmail queue program = /var/qmail/bin/qmail-queue clamdscan program = /usr/local/bin/clamdscan clamav scan = ON trophie scanning = OFF attachement scan = OFF ripmime program = OFF custom smtp reject = OFF drop message = OFF regex scanner = OFF quarantine processing = OFF domain based checking = OFF add received header = OFF spam scanning = OFF dspam scanning = OFF SUCCEEDED 00:00:03 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for simscan-1.4.0_8 --- ./aclocal.m4 --- cd . && /bin/sh /construction/mail/simscan/simscan-1.4.0/missing --run aclocal-1.6 /construction/mail/simscan/simscan-1.4.0/missing: aclocal-1.6: not found WARNING: `aclocal-1.6' is missing on your system. You should only need it if you modified `acinclude.m4' or `configure.in'. You might want to install the `Automake' and `Perl' packages. Grab them from any GNU archive site. --- ./configure --- --- ./config.h.in --- --- ./configure --- cd . && /bin/sh /construction/mail/simscan/simscan-1.4.0/missing --run autoconf --- ./config.h.in --- cd . && /bin/sh /construction/mail/simscan/simscan-1.4.0/missing --run autoheader --- ./configure --- /construction/mail/simscan/simscan-1.4.0/missing: autoconf: not found WARNING: `autoconf' is missing on your system. You should only need it if you modified `configure.in'. You might want to install the `Autoconf' and `GNU m4' packages. Grab them from any GNU archive site. --- ./config.h.in --- /construction/mail/simscan/simscan-1.4.0/missing: autoheader: not found WARNING: `autoheader' is missing on your system. You should only need it if you modified `acconfig.h' or `configure.in'. You might want to install the `Autoconf' and `GNU m4' packages. Grab them from any GNU archive site. touch ./config.h.in --- all --- /usr/bin/make all-recursive --- all-recursive --- Making all in cdb --- compile --- --- load --- --- systype --- --- load --- ( cat warn-auto.sh; echo 'main="$1"; shift'; echo exec "`head -1 conf-ld`" '-o "$main" "$main".o ${1+"$@"}' ) > load chmod 755 load --- compile --- ( cat warn-auto.sh; echo exec "`head -1 conf-cc`" '-c ${1+"$@"}' ) > compile chmod 755 compile --- alloc.o --- --- buffer.o --- --- buffer_0.o --- --- buffer_1.o --- --- buffer_1s.o --- --- buffer_2.o --- --- buffer_copy.o --- --- buffer_get.o --- --- buffer_put.o --- --- buffer_1s.o --- ./compile buffer_1s.c In file included from buffer_1s.c:2: buffer.h:12:61: warning: initialization of 'int (*)()' from incompatible pointer type 'ssize_t (*)(int, const void *, size_t)' {aka 'long int (*)(int, const void *, long unsigned int)'} [-Wincompatible-pointer-types] #define BUFFER_INIT(op,fd,buf,len) { (buf), 0, (len), (fd), (op) } ^ buffer_1s.c:5:20: note: in expansion of macro 'BUFFER_INIT' static buffer it = BUFFER_INIT(write,1,buffer_1small_space,sizeof buffer_1small_space); ^~~~~~~~~~~ buffer.h:12:61: note: (near initialization for 'it.op') #define BUFFER_INIT(op,fd,buf,len) { (buf), 0, (len), (fd), (op) } ^ buffer_1s.c:5:20: note: in expansion of macro 'BUFFER_INIT' static buffer it = BUFFER_INIT(write,1,buffer_1small_space,sizeof buffer_1small_space); ^~~~~~~~~~~ --- buffer_2.o --- ./compile buffer_2.c In file included from buffer_2.c:2: buffer.h:12:61: warning: initialization of 'int (*)()' from incompatible pointer type 'ssize_t (*)(int, const void *, size_t)' {aka 'long int (*)(int, const void *, long unsigned int)'} [-Wincompatible-pointer-types] #define BUFFER_INIT(op,fd,buf,len) { (buf), 0, (len), (fd), (op) } ^ buffer_2.c:5:20: note: in expansion of macro 'BUFFER_INIT' static buffer it = BUFFER_INIT(write,2,buffer_2_space,sizeof buffer_2_space); ^~~~~~~~~~~ buffer.h:12:61: note: (near initialization for 'it.op') #define BUFFER_INIT(op,fd,buf,len) { (buf), 0, (len), (fd), (op) } ^ buffer_2.c:5:20: note: in expansion of macro 'BUFFER_INIT' static buffer it = BUFFER_INIT(write,2,buffer_2_space,sizeof buffer_2_space); ^~~~~~~~~~~ --- buffer.o --- ./compile buffer.c --- systype --- ( cat warn-auto.sh; echo CC=\'`head -1 conf-cc`\'; echo LD=\'`head -1 conf-ld`\'; cat find-systype.sh; ) | sh > systype --- alloc.o --- ./compile alloc.c --- buffer_copy.o --- ./compile buffer_copy.c --- buffer_0.o --- ./compile buffer_0.c --- buffer_1.o --- ./compile buffer_1.c --- buffer_get.o --- ./compile buffer_get.c --- byte_copy.o --- --- byte_cr.o --- --- byte_diff.o --- --- buffer_put.o --- ./compile buffer_put.c --- byte_copy.o --- ./compile byte_copy.c --- byte_diff.o --- ./compile byte_diff.c --- buffer_1.o --- In file included from buffer_1.c:2: buffer.h:12:61: warning: initialization of 'int (*)()' from incompatible pointer type 'ssize_t (*)(int, const void *, size_t)' {aka 'long int (*)(int, const void *, long unsigned int)'} [-Wincompatible-pointer-types] #define BUFFER_INIT(op,fd,buf,len) { (buf), 0, (len), (fd), (op) } ^ buffer_1.c:5:20: note: in expansion of macro 'BUFFER_INIT' static buffer it = BUFFER_INIT(write,1,buffer_1_space,sizeof buffer_1_space); ^~~~~~~~~~~ buffer.h:12:61: note: (near initialization for 'it.op') #define BUFFER_INIT(op,fd,buf,len) { (buf), 0, (len), (fd), (op) } ^ buffer_1.c:5:20: note: in expansion of macro 'BUFFER_INIT' static buffer it = BUFFER_INIT(write,1,buffer_1_space,sizeof buffer_1_space); ^~~~~~~~~~~ --- byte_cr.o --- ./compile byte_cr.c --- error.o --- ./compile error.c --- alloc.o --- alloc.c:3:14: warning: conflicting types for built-in function 'malloc' [-Wbuiltin-declaration-mismatch] extern char *malloc(); ^~~~~~ --- error_str.o --- ./compile error_str.c --- fmt_ulong.o --- ./compile fmt_ulong.c --- open_read.o --- ./compile open_read.c --- open_trunc.o --- ./compile open_trunc.c --- scan_ulong.o --- ./compile scan_ulong.c --- seek_cur.o --- ./compile seek_cur.c --- seek_set.o --- ./compile seek_set.c --- str_len.o --- --- strerr_die.o --- --- str_len.o --- ./compile str_len.c --- strerr_die.o --- ./compile strerr_die.c --- strerr_sys.o --- ./compile strerr_sys.c --- uint32.h --- ( ( ./compile tryulong32.c && ./load tryulong32 && ./tryulong32 ) >/dev/null 2>&1 && cat uint32.h2 || cat uint32.h1 ) > uint32.h --- makelib --- ( cat warn-auto.sh; echo 'main="$1"; shift'; echo 'rm -f "$main"'; echo 'ar cr "$main" ${1+"$@"}'; case "`cat systype`" in sunos-5.*) ;; unix_sv*) ;; irix64-*) ;; irix-*) ;; dgux-*) ;; hp-ux-*) ;; sco*) ;; *) echo 'ranlib "$main"' ;; esac ) > makelib chmod 755 makelib --- alloc.a --- --- unix.a --- --- alloc.a --- ./makelib alloc.a alloc.o --- unix.a --- ./makelib unix.a error.o open_read.o open_trunc.o error_str.o seek_set.o seek_cur.o --- buffer.a --- ./makelib buffer.a strerr_sys.o buffer.o buffer_put.o buffer_2.o strerr_die.o buffer_get.o buffer_copy.o buffer_1.o buffer_0.o buffer_1s.o --- uint32.h --- rm -f tryulong32.o tryulong32 --- cdb_unpack.o --- --- cdb_seek.o --- --- cdb.o --- --- cdb_hash.o --- --- cdb_make.o --- --- uint32_pack.o --- --- uint32_unpack.o --- --- cdb_unpack.o --- ./compile cdb_unpack.c --- cdb_seek.o --- ./compile cdb_seek.c --- cdb_hash.o --- ./compile cdb_hash.c --- cdb_make.o --- ./compile cdb_make.c --- cdb.o --- ./compile cdb.c --- uint32_pack.o --- ./compile uint32_pack.c --- uint32_unpack.o --- ./compile uint32_unpack.c --- cdb_make.o --- cdb_make.c: In function 'cdb_make_start': cdb_make.c:18:21: warning: passing argument 2 of 'buffer_init' from incompatible pointer type [-Wincompatible-pointer-types] buffer_init(&c->b,write,fd,c->bspace,sizeof c->bspace); ^~~~~ In file included from cdb_make.h:6, from cdb_make.c:8: buffer.h:16:34: note: expected 'int (*)()' but argument is of type 'ssize_t (*)(int, const void *, size_t)' {aka 'long int (*)(int, const void *, long unsigned int)'} extern void buffer_init(buffer *,int (*)(),int,char *,unsigned int); ^~~~~~~~~ --- cdb_seek.o --- cdb_seek.c: In function 'cdb_seek': cdb_seek.c:66:5: warning: implicit declaration of function 'printf' [-Wimplicit-function-declaration] printf("cdb_seek error 1\n"); ^~~~~~ cdb_seek.c:66:5: warning: incompatible implicit declaration of built-in function 'printf' cdb_seek.c:66:5: note: include '' or provide a declaration of 'printf' cdb_seek.c:5:1: +#include cdb_seek.c:66:5: printf("cdb_seek error 1\n"); ^~~~~~ cdb_seek.c:71:5: warning: incompatible implicit declaration of built-in function 'printf' printf("cdb_seek error 2\n"); ^~~~~~ cdb_seek.c:71:5: note: include '' or provide a declaration of 'printf' cdb_seek.c:75:9: warning: implicit declaration of function 'cdb_unpack'; did you mean 'cdb_seek'? [-Wimplicit-function-declaration] pos = cdb_unpack(packbuf); ^~~~~~~~~~ cdb_seek cdb_seek.c:83:7: warning: incompatible implicit declaration of built-in function 'printf' printf("cdb_seek error 3\n"); ^~~~~~ cdb_seek.c:83:7: note: include '' or provide a declaration of 'printf' cdb_seek.c:87:7: warning: incompatible implicit declaration of built-in function 'printf' printf("cdb_seek error 4\n"); ^~~~~~ cdb_seek.c:87:7: note: include '' or provide a declaration of 'printf' cdb_seek.c:94:9: warning: incompatible implicit declaration of built-in function 'printf' printf("cdb_seek error 5\n"); ^~~~~~ cdb_seek.c:94:9: note: include '' or provide a declaration of 'printf' cdb_seek.c:98:9: warning: incompatible implicit declaration of built-in function 'printf' printf("cdb_seek error 6\n"); ^~~~~~ cdb_seek.c:98:9: note: include '' or provide a declaration of 'printf' cdb_seek.c:104:13: warning: incompatible implicit declaration of built-in function 'printf' printf("cdb_seek error 7\n"); ^~~~~~ cdb_seek.c:104:13: note: include '' or provide a declaration of 'printf' --- byte.a --- ./makelib byte.a byte_copy.o byte_cr.o str_len.o fmt_ulong.o uint32_unpack.o byte_diff.o uint32_pack.o scan_ulong.o --- cdb.a --- ./makelib cdb.a cdb.o cdb_hash.o cdb_make.o cdb_unpack.o cdb_seek.o --- ./Makefile.in --- --- simscan.o --- --- simscanmk.o --- --- ./Makefile.in --- cd . && /bin/sh /construction/mail/simscan/simscan-1.4.0/missing --run automake-1.6 --foreign Makefile --- simscan.o --- cc -DHAVE_CONFIG_H -I. -I. -I. -pipe -O2 -fno-strict-aliasing -Wall -c `test -f 'simscan.c' || echo './'`simscan.c --- simscanmk.o --- cc -DHAVE_CONFIG_H -I. -I. -I. -pipe -O2 -fno-strict-aliasing -Wall -c `test -f 'simscanmk.c' || echo './'`simscanmk.c --- ./Makefile.in --- /construction/mail/simscan/simscan-1.4.0/missing: automake-1.6: not found WARNING: `automake-1.6' is missing on your system. You should only need it if you modified `Makefile.am', `acinclude.m4' or `configure.in'. You might want to install the `Automake' and `Perl' packages. Grab them from any GNU archive site. --- Makefile --- cd . && /bin/sh ./config.status Makefile --- simscan.o --- simscan.c: In function 'main': simscan.c:767:7: warning: missing sentinel in function call [-Wformat=] execl(qmail_queue, qmail_queue, 0); ^~~~~ simscan.c: In function 'is_clam': simscan.c:1031:12: warning: this 'while' clause does not guard... [-Wmisleading-indentation] while(*tmpstr!=':' && tmpstr>clambuf) --tmpstr; ++tmpstr; ^~~~~ simscan.c:1031:60: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'while' while(*tmpstr!=':' && tmpstr>clambuf) --tmpstr; ++tmpstr; ^~ simscan.c: In function 'str_rstr': simscan.c:1720:3: warning: this 'for' clause does not guard... [-Wmisleading-indentation] for(sh=h;*h!=0;++h); --h; ^~~ simscan.c:1720:24: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'for' for(sh=h;*h!=0;++h); --h; ^~ simscan.c:1721:3: warning: this 'for' clause does not guard... [-Wmisleading-indentation] for(sn=n;*n!=0;++n); --n; ^~~ simscan.c:1721:24: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'for' for(sn=n;*n!=0;++n); --n; ^~ --- simscanmk --- cc -pipe -O2 -fno-strict-aliasing -Wall -o simscanmk simscanmk.o cdb/cdb.a cdb/buffer.a cdb/unix.a cdb/byte.a cdb/alloc.a --- simscan.o --- simscan.c: In function 'format_dir': simscan.c:1453:37: warning: '%s' directive output may be truncated writing up to 2047 bytes into a region of size 2029 [-Wformat-truncation=] snprintf(workdir,BUFFER_SIZE, "%s/%s", WORKDIR, unique_ext); ^~ ~~~~~~~~~~ simscan.c:1453:3: note: 'snprintf' output between 20 and 2067 bytes into a destination of size 2048 snprintf(workdir,BUFFER_SIZE, "%s/%s", WORKDIR, unique_ext); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- Makefile --- config.status: creating Makefile --- simscan.o --- simscan.c: In function 'main': simscan.c:305:53: warning: '%s' directive output may be truncated writing up to 2047 bytes into a region of size 2044 [-Wformat-truncation=] snprintf(message_name, sizeof(message_name), "msg.%s", unique_ext); ^~ ~~~~~~~~~~ simscan.c:305:3: note: 'snprintf' output between 5 and 2052 bytes into a destination of size 2048 snprintf(message_name, sizeof(message_name), "msg.%s", unique_ext); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ simscan.c:338:48: warning: '%s' directive output may be truncated writing up to 2047 bytes into a region of size 2043 [-Wformat-truncation=] snprintf(addr_name, sizeof(addr_name), "addr.%s", unique_ext); ^~ ~~~~~~~~~~ simscan.c:338:3: note: 'snprintf' output between 6 and 2053 bytes into a destination of size 2048 snprintf(addr_name, sizeof(addr_name), "addr.%s", unique_ext); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- simscan --- cc -pipe -O2 -fno-strict-aliasing -Wall -o simscan simscan.o cdb/cdb.a cdb/buffer.a cdb/unix.a cdb/byte.a cdb/alloc.a SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- ===> simscan-1.4.0_8 depends on executable: ripmime - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for simscan-1.4.0_8 ===> simscan-1.4.0_8 depends on executable: ripmime - found /bin/mkdir -p /construction/mail/simscan/stage/var/qmail/bin ===> Generating temporary packing list ===> Creating groups. ===> Creating users Making install in cdb /usr/bin/install -c simscan /construction/mail/simscan/stage/var/qmail/bin/simscan /usr/bin/install -c simscanmk /construction/mail/simscan/stage/var/qmail/bin/simscanmk /usr/bin/install -c -m 750 -d /construction/mail/simscan/stage/var/qmail/simscan strip /construction/mail/simscan/stage/var/qmail/bin/simscan strip /construction/mail/simscan/stage/var/qmail/bin/simscanmk /bin/mkdir -p /construction/mail/simscan/stage/usr/local/share/doc/simscan install -m 0644 /construction/mail/simscan/simscan-1.4.0/AUTHORS /construction/mail/simscan/stage/usr/local/share/doc/simscan install -m 0644 /construction/mail/simscan/simscan-1.4.0/ChangeLog /construction/mail/simscan/stage/usr/local/share/doc/simscan install -m 0644 /construction/mail/simscan/simscan-1.4.0/README /construction/mail/simscan/stage/usr/local/share/doc/simscan install -m 0644 /construction/mail/simscan/simscan-1.4.0/TODO /construction/mail/simscan/stage/usr/local/share/doc/simscan ====> Compressing man pages (compress-man) ====> Running Q/A tests (stage-qa) Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for simscan-1.4.0_8 file sizes/checksums [6]: 0% file sizes/checksums [6]: 100% packing files [6]: 0% packing files [6]: 100% packing directories [3]: 0% packing directories [3]: 100% SUCCEEDED 00:00:00 TOTAL TIME 00:00:10