------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/freetype2-2.10.1.txz ===== Message from freetype2-2.10.1: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). Installing /packages/All/giflib-5.2.1.txz Installing /packages/All/png-1.6.37.txz Installing /packages/All/libICE-1.0.10,1.txz Installing /packages/All/libSM-1.2.3,1.txz Installing /packages/All/libXau-1.0.9.txz Installing /packages/All/libxml2-2.9.10.txz Installing /packages/All/libpthread-stubs-0.4.txz Installing /packages/All/xorgproto-2019.2.txz Installing /packages/All/libXdmcp-1.1.3.txz Installing /packages/All/libxcb-1.13.1.txz Installing /packages/All/libX11-1.6.9,1.txz Installing /packages/All/libXext-1.3.4,1.txz Installing /packages/All/libXt-1.2.0,1.txz Installing /packages/All/libXmu-1.1.3,1.txz Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gettext-runtime-0.20.1.txz Installing /packages/All/libXpm-3.5.13.txz Installing /packages/All/libXaw-1.0.13_3,2.txz Installing /packages/All/t1lib-5.1.2_5,1.txz Installing /packages/All/jbigkit-2.1_1.txz Installing /packages/All/jpeg-turbo-2.0.4.txz Installing /packages/All/tiff-4.1.0.txz Installing /packages/All/perl5-5.30.1.txz ===== Message from perl5-5.30.1: -- The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Installing /packages/All/p5-Imager-1.011.txz SUCCEEDED 00:00:19 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> p5-Imager-QRCode-0.035 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> p5-Imager-QRCode-0.035 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by p5-Imager-QRCode-0.035 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> p5-Imager-QRCode-0.035 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by p5-Imager-QRCode-0.035 for building => SHA256 Checksum OK for Imager-QRCode-0.035.tar.gz. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> p5-Imager-QRCode-0.035 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by p5-Imager-QRCode-0.035 for building ===> Extracting for p5-Imager-QRCode-0.035 => SHA256 Checksum OK for Imager-QRCode-0.035.tar.gz. Extracted Memory Use: 2.80M SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for p5-Imager-QRCode-0.035 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> p5-Imager-QRCode-0.035 depends on package: p5-Imager>=0.55 - found ===> p5-Imager-QRCode-0.035 depends on package: perl5>=5.30.r1<5.31 - found ===> p5-Imager-QRCode-0.035 depends on package: perl5>=5.30.r1<5.31 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> p5-Imager-QRCode-0.035 depends on package: p5-Imager>=0.55 - found ===> p5-Imager-QRCode-0.035 depends on package: perl5>=5.30.r1<5.31 - found ===> p5-Imager-QRCode-0.035 depends on package: perl5>=5.30.r1<5.31 - found ===> Configuring for p5-Imager-QRCode-0.035 Cannot determine perl version info from lib/Imager/QRCode.pm *** Module::AutoInstall version 1.16 *** Checking for Perl dependencies... [Core Features] - Imager ...loaded. (1.011 >= 0.55) - Test::More ...loaded. (1.302162) - XSLoader ...loaded. (0.30 >= 0.02) *** Module::AutoInstall configuration finished. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Imager::QRCode Writing MYMETA.yml and MYMETA.json SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for p5-Imager-QRCode-0.035 cp lib/Imager/QRCode.pm blib/lib/Imager/QRCode.pm Running Mkbootstrap for QRCode () chmod 644 "QRCode.bs" "/usr/local/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- QRCode.bs blib/arch/auto/Imager/QRCode/QRCode.bs 644 "/usr/local/bin/perl" "-Iinc" "/usr/local/lib/perl5/5.30/ExtUtils/xsubpp" -typemap '/usr/local/lib/perl5/5.30/ExtUtils/typemap' -typemap /usr/local/lib/perl5/site_perl/mach/5.30/Imager/typemap src/QRCode.xs > src/QRCode.xsc mv src/QRCode.xsc src/QRCode.c cc -c -Isrc "-I." -I/usr/local/lib/perl5/site_perl/mach/5.30/Imager/include -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -DOVER_LIBQRENCODE_2_0_0 -DHAVE_CONFIG_H -pipe -O2 -fno-strict-aliasing -DVERSION=\"0.035\" -DXS_VERSION=\"0.035\" -o src/QRCode.o -DPIC -fPIC "-I/usr/local/lib/perl5/5.30/mach/CORE" src/QRCode.c In file included from src/QRCode.xs:7: /usr/local/lib/perl5/site_perl/mach/5.30/Imager/include/ppport.h:4385: warning: "WIDEST_UTYPE" redefined # define WIDEST_UTYPE U64TYPE In file included from /usr/local/lib/perl5/5.30/mach/CORE/perl.h:2508, from src/QRCode.xs:5: /usr/local/lib/perl5/5.30/mach/CORE/handy.h:1072: note: this is the location of the previous definition # define WIDEST_UTYPE U64 cc -c -Isrc "-I." -I/usr/local/lib/perl5/site_perl/mach/5.30/Imager/include -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -DOVER_LIBQRENCODE_2_0_0 -DHAVE_CONFIG_H -pipe -O2 -fno-strict-aliasing -DVERSION=\"0.035\" -DXS_VERSION=\"0.035\" -o src/bitstream.o -DPIC -fPIC "-I/usr/local/lib/perl5/5.30/mach/CORE" src/bitstream.c cc -c -Isrc "-I." -I/usr/local/lib/perl5/site_perl/mach/5.30/Imager/include -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -DOVER_LIBQRENCODE_2_0_0 -DHAVE_CONFIG_H -pipe -O2 -fno-strict-aliasing -DVERSION=\"0.035\" -DXS_VERSION=\"0.035\" -o src/mask.o -DPIC -fPIC "-I/usr/local/lib/perl5/5.30/mach/CORE" src/mask.c cc -c -Isrc "-I." -I/usr/local/lib/perl5/site_perl/mach/5.30/Imager/include -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -DOVER_LIBQRENCODE_2_0_0 -DHAVE_CONFIG_H -pipe -O2 -fno-strict-aliasing -DVERSION=\"0.035\" -DXS_VERSION=\"0.035\" -o src/mmask.o -DPIC -fPIC "-I/usr/local/lib/perl5/5.30/mach/CORE" src/mmask.c cc -c -Isrc "-I." -I/usr/local/lib/perl5/site_perl/mach/5.30/Imager/include -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -DOVER_LIBQRENCODE_2_0_0 -DHAVE_CONFIG_H -pipe -O2 -fno-strict-aliasing -DVERSION=\"0.035\" -DXS_VERSION=\"0.035\" -o src/mqrspec.o -DPIC -fPIC "-I/usr/local/lib/perl5/5.30/mach/CORE" src/mqrspec.c cc -c -Isrc "-I." -I/usr/local/lib/perl5/site_perl/mach/5.30/Imager/include -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -DOVER_LIBQRENCODE_2_0_0 -DHAVE_CONFIG_H -pipe -O2 -fno-strict-aliasing -DVERSION=\"0.035\" -DXS_VERSION=\"0.035\" -o src/qrencode.o -DPIC -fPIC "-I/usr/local/lib/perl5/5.30/mach/CORE" src/qrencode.c cc -c -Isrc "-I." -I/usr/local/lib/perl5/site_perl/mach/5.30/Imager/include -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -DOVER_LIBQRENCODE_2_0_0 -DHAVE_CONFIG_H -pipe -O2 -fno-strict-aliasing -DVERSION=\"0.035\" -DXS_VERSION=\"0.035\" -o src/qrinput.o -DPIC -fPIC "-I/usr/local/lib/perl5/5.30/mach/CORE" src/qrinput.c cc -c -Isrc "-I." -I/usr/local/lib/perl5/site_perl/mach/5.30/Imager/include -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -DOVER_LIBQRENCODE_2_0_0 -DHAVE_CONFIG_H -pipe -O2 -fno-strict-aliasing -DVERSION=\"0.035\" -DXS_VERSION=\"0.035\" -o src/qrspec.o -DPIC -fPIC "-I/usr/local/lib/perl5/5.30/mach/CORE" src/qrspec.c cc -c -Isrc "-I." -I/usr/local/lib/perl5/site_perl/mach/5.30/Imager/include -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -DOVER_LIBQRENCODE_2_0_0 -DHAVE_CONFIG_H -pipe -O2 -fno-strict-aliasing -DVERSION=\"0.035\" -DXS_VERSION=\"0.035\" -o src/rscode.o -DPIC -fPIC "-I/usr/local/lib/perl5/5.30/mach/CORE" src/rscode.c cc -c -Isrc "-I." -I/usr/local/lib/perl5/site_perl/mach/5.30/Imager/include -pipe -O2 -isystem /usr/local/include -fno-strict-aliasing -DOVER_LIBQRENCODE_2_0_0 -DHAVE_CONFIG_H -pipe -O2 -fno-strict-aliasing -DVERSION=\"0.035\" -DXS_VERSION=\"0.035\" -o src/split.o -DPIC -fPIC "-I/usr/local/lib/perl5/5.30/mach/CORE" src/split.c rm -f blib/arch/auto/Imager/QRCode/QRCode.so cc -shared -L/usr/local/lib/perl5/5.30/mach/CORE -lperl -L/usr/local/lib -fstack-protector-strong src/QRCode.o src/bitstream.o src/mask.o src/mmask.o src/mqrspec.o src/qrencode.o src/qrinput.o src/qrspec.o src/rscode.o src/split.o -o blib/arch/auto/Imager/QRCode/QRCode.so chmod 755 blib/arch/auto/Imager/QRCode/QRCode.so Manifying 1 pod document SUCCEEDED 00:00:05 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- ===> p5-Imager-QRCode-0.035 depends on package: p5-Imager>=0.55 - found ===> p5-Imager-QRCode-0.035 depends on package: perl5>=5.30.r1<5.31 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for p5-Imager-QRCode-0.035 ===> p5-Imager-QRCode-0.035 depends on package: p5-Imager>=0.55 - found ===> p5-Imager-QRCode-0.035 depends on package: perl5>=5.30.r1<5.31 - found ===> Generating temporary packing list "/usr/local/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- QRCode.bs blib/arch/auto/Imager/QRCode/QRCode.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /construction/graphics/p5-Imager-QRCode/stage/usr/local/lib/perl5/site_perl/mach/5.30/auto/Imager/QRCode/QRCode.so Installing /construction/graphics/p5-Imager-QRCode/stage/usr/local/lib/perl5/site_perl/mach/5.30/Imager/QRCode.pm Installing /construction/graphics/p5-Imager-QRCode/stage/usr/local/lib/perl5/site_perl/man/man3/Imager::QRCode.3 ====> Compressing man pages (compress-man) ====> Running Q/A tests (stage-qa) Warning: 'lib/perl5/site_perl/mach/5.30/auto/Imager/QRCode/QRCode.so' is not stripped consider trying INSTALL_TARGET=install-strip or using ${STRIP_CMD} Notice: You have some Perl modules as dependencies but you do not have devel/p5-Module-CoreList installed, the perlcore QA check gets better results when using it, especially with older Perl versions. Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks SUCCEEDED 00:00:02 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for p5-Imager-QRCode-0.035 file sizes/checksums [4]: 0% file sizes/checksums [4]: 100% packing files [4]: 0% packing files [4]: 100% packing directories [0]: 0% packing directories [0]: 100% SUCCEEDED 00:00:00 TOTAL TIME 00:00:28