------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/freetype2-2.10.1.txz ===== Message from freetype2-2.10.1: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). Installing /packages/All/expat-2.2.8.txz Installing /packages/All/fontconfig-2.12.6,1.txz Running fc-cache to build fontconfig cache... /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gettext-runtime-0.20.1.txz Installing /packages/All/libidn-1.35.txz Installing /packages/All/png-1.6.37.txz Installing /packages/All/openssl-1.1.1d,1.txz Installing /packages/All/jbig2dec-0.17.txz Installing /packages/All/libpaper-1.1.24.4.txz Installing /packages/All/jbigkit-2.1_1.txz Installing /packages/All/jpeg-turbo-2.0.4.txz Installing /packages/All/tiff-4.1.0.txz Installing /packages/All/libdaemon-0.14_1.txz Installing /packages/All/libICE-1.0.10,1.txz Installing /packages/All/libSM-1.2.3,1.txz Installing /packages/All/libXau-1.0.9.txz Installing /packages/All/libxml2-2.9.10.txz Installing /packages/All/libpthread-stubs-0.4.txz Installing /packages/All/xorgproto-2019.2.txz Installing /packages/All/libXdmcp-1.1.3.txz Installing /packages/All/libxcb-1.13.1.txz Installing /packages/All/libX11-1.6.9,1.txz Installing /packages/All/dbus-1.12.16.txz ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. Installing /packages/All/pcre-8.43_2.txz Installing /packages/All/libffi-3.2.1_3.txz Installing /packages/All/libiconv-1.14_11.txz Installing /packages/All/ncurses-6.1.20190525.txz Installing /packages/All/readline-8.0.4.txz Installing /packages/All/python37-3.7.6.txz ===== Message from python37-3.7.6: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py37-gdbm databases/py-gdbm@py37 py37-sqlite3 databases/py-sqlite3@py37 py37-tkinter x11-toolkits/py-tkinter@py37 Installing /packages/All/glib-2.56.3_7,1.txz No schema files found: doing nothing. Installing /packages/All/dbus-glib-0.110.txz Installing /packages/All/gdbm-1.18.1_1.txz Installing /packages/All/gobject-introspection-1.56.1,1.txz Installing /packages/All/gnome_subr-1.0.txz Installing /packages/All/avahi-app-0.7_2.txz ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. Installing /packages/All/gmp-6.2.0.txz Installing /packages/All/nettle-3.5.1_1.txz Installing /packages/All/libtasn1-4.15.0.txz Installing /packages/All/libunistring-0.9.10_1.txz Installing /packages/All/libidn2-2.3.0_1.txz Installing /packages/All/ca_root_nss-3.51.txz ===== Message from ca_root_nss-3.51: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/p11-kit-0.23.18.1.txz Installing /packages/All/tpm-emulator-0.7.4_2.txz ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. Installing /packages/All/trousers-0.3.14_2.txz ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. ===== Message from trousers-0.3.14_2: -- To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Installing /packages/All/gnutls-3.6.12.txz Installing /packages/All/cups-2.2.13.txz ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. Installing /packages/All/poppler-data-0.4.9_2.txz Installing /packages/All/ghostscript9-agpl-base-9.50_2.txz ===== Message from ghostscript9-agpl-base-9.50_2: -- This package installs a script named dvipdf that depends on dvips. If you want to use this script you need to install print/tex-dvipsk. Installing /packages/All/perl5-5.30.1.txz ===== Message from perl5-5.30.1: -- The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. SUCCEEDED 00:00:20 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> eps2png-2.905 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> eps2png-2.905 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by eps2png-2.905 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> eps2png-2.905 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by eps2png-2.905 for building => SHA256 Checksum OK for eps2png-2.905.tar.gz. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> eps2png-2.905 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by eps2png-2.905 for building ===> Extracting for eps2png-2.905 => SHA256 Checksum OK for eps2png-2.905.tar.gz. Extracted Memory Use: 0.14M SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for eps2png-2.905 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> eps2png-2.905 depends on package: ghostscript9-agpl-base>=9.16_2 - found ===> eps2png-2.905 depends on package: perl5>=5.30.r1<5.31 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> eps2png-2.905 depends on package: ghostscript9-agpl-base>=9.16_2 - found ===> eps2png-2.905 depends on package: perl5>=5.30.r1<5.31 - found ===> Configuring for eps2png-2.905 WARNING: This Makefile will install user accessible scripts. The location for these scripts is /usr/local/bin. You may consider to pass INSTALLSCRIPT=/usr/bin (or some other convenient location) to "make install". IMPORTANT: This program requires Ghostscript and may require the Portable Bitmap package (PBM) for additional conversions. IMPORTANT: Due to ongoing development of the Ghostscript output drivers, some xt tests may fail. See README for details. Ghostscript version 9.50 detected. No Ghostscript driver for gif. PBM fallback required. No Ghostscript driver for gifmono. PBM fallback required. Use of uninitialized value in pattern match (m//) at ./Makefile.PL line 70. No PBM found. You won't be able to generate GIF images. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for eps2png Writing MYMETA.yml and MYMETA.json Creating script Writing RPM spec file... SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for eps2png-2.905 --- blib/lib/.exists --- --- blib/arch/.exists --- --- blib/lib/auto/eps2png/.exists --- --- blib/arch/auto/eps2png/.exists --- --- blib/bin/.exists --- --- blib/script/.exists --- --- blib/man1/.exists --- --- blib/man3/.exists --- --- config --- --- subdirs --- --- dynamic --- --- pm_to_blib --- --- blib/script/eps2png --- cp script/eps2png blib/script/eps2png --- blibdirs --- --- config --- --- blib/script/eps2png --- "/usr/local/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/eps2png --- dynamic --- --- linkext --- --- pm_to_blib --- cp lib/App/eps2png.pm blib/lib/App/eps2png.pm --- pure_all --- --- pure_all --- --- manifypods --- Manifying 1 pod document Manifying 1 pod document --- all --- SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- ===> eps2png-2.905 depends on package: ghostscript9-agpl-base>=9.16_2 - found ===> eps2png-2.905 depends on package: perl5>=5.30.r1<5.31 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for eps2png-2.905 ===> eps2png-2.905 depends on package: ghostscript9-agpl-base>=9.16_2 - found ===> eps2png-2.905 depends on package: perl5>=5.30.r1<5.31 - found ===> Generating temporary packing list Manifying 1 pod document Manifying 1 pod document Installing /construction/graphics/eps2png/stage/usr/local/lib/perl5/site_perl/App/eps2png.pm Installing /construction/graphics/eps2png/stage/usr/local/lib/perl5/site_perl/man/man1/eps2png.1 Installing /construction/graphics/eps2png/stage/usr/local/lib/perl5/site_perl/man/man3/App::eps2png.3 Installing /construction/graphics/eps2png/stage/usr/local/bin/eps2png ====> Compressing man pages (compress-man) ====> Running Q/A tests (stage-qa) Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for eps2png-2.905 file sizes/checksums [5]: 0% file sizes/checksums [5]: 100% packing files [5]: 0% packing files [5]: 100% packing directories [0]: 0% packing directories [0]: 100% SUCCEEDED 00:00:00 TOTAL TIME 00:00:23