------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/indexinfo-0.3.1.tgz Installing /packages/All/gettext-runtime-0.20.1.tgz Installing /packages/All/ncurses-6.1.20190525.tgz Installing /packages/All/bash-5.0.7.tgz Installing /packages/All/libsigsegv-2.12.tgz Message from libsigsegv-2.12: ==== Note that the stackoverflow handling functions of this library need procfs mounted on /proc. ==== Installing /packages/All/readline-8.0.0.tgz Installing /packages/All/gawk-5.0.0.tgz Installing /packages/All/expat-2.2.6_1.tgz Installing /packages/All/pcre-8.43_2.tgz Installing /packages/All/libnghttp2-1.39.1_1.tgz Installing /packages/All/ca_root_nss-3.45.tgz Message from ca_root_nss-3.45: ********************************* WARNING ********************************* FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. *********************************** NOTE ********************************** This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem *************************************************************************** Installing /packages/All/openssl-1.0.2s,1.tgz Message from openssl-1.0.2s,1: Edit /usr/local/openssl/openssl.cnf to fit your needs. Installing /packages/All/curl-7.65.3.tgz Installing /packages/All/cvsps-2.1_2.tgz Message from cvsps-2.1_2: ===> NOTICE: The cvsps port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/perl5-5.28.2.tgz Message from perl5-5.28.2: The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Installing /packages/All/p5-HTML-Tagset-3.20_1.tgz Installing /packages/All/p5-HTML-Parser-3.72.tgz Installing /packages/All/p5-CGI-4.44.tgz Installing /packages/All/p5-Error-0.17027.tgz Installing /packages/All/p5-Digest-HMAC-1.03_1.tgz Installing /packages/All/krb5-1.17_2.tgz Installing /packages/All/p5-GSSAPI-0.28_1.tgz Installing /packages/All/p5-Authen-SASL-2.16_1.tgz Installing /packages/All/p5-Net-SSLeay-1.85.tgz Installing /packages/All/p5-Mozilla-CA-20180117.tgz Installing /packages/All/p5-Socket6-0.29.tgz Installing /packages/All/p5-IO-Socket-INET6-2.72_1.tgz Installing /packages/All/p5-IO-Socket-SSL-2.066.tgz Installing /packages/All/libffi-3.2.1_3.tgz Installing /packages/All/python36-3.6.9.tgz Message from python36-3.6.9: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py36-gdbm databases/py-gdbm@py36 py36-sqlite3 databases/py-sqlite3@py36 py36-tkinter x11-toolkits/py-tkinter@py36 =========================================================================== Installing /packages/All/git-2.22.0.tgz ===> Creating groups. Creating group 'git_daemon' with gid '964'. ===> Creating users Creating user 'git_daemon' with uid '964'. Message from git-2.22.0: ------------------------------------------------------------------------ *************************** GITWEB ************************************* If you installed the GITWEB option please follow these instructions: In the directory /usr/local/share/examples/git/gitweb you can find all files to make gitweb work as a public repository on the web. All you have to do to make gitweb work is: 1) Please be sure you're able to execute CGI scripts in /usr/local/share/examples/git/gitweb. 2) Set the GITWEB_CONFIG variable in your webserver's config to /usr/local/etc/git/gitweb.conf. This variable is passed to gitweb.cgi. 3) Restart server. *************************** GITWEB ************************************* *************************** CONTRIB ************************************ If you installed the CONTRIB option please note that the scripts are installed in /usr/local/share/git-core/contrib. Some of them require other ports to be installed (perl, python, etc), which you may need to install manually. *************************** CONTRIB ************************************ ------------------------------------------------------------------------ Installing /packages/All/patch-2.7.6.tgz Installing /packages/All/gnugrep-3.3.tgz Installing /packages/All/gperf-3.0.3_2.tgz Installing /packages/All/gsed-4.7.tgz Installing /packages/All/p5-Locale-gettext-1.07.tgz Installing /packages/All/help2man-1.47.10.tgz Installing /packages/All/libiconv-1.14_11.tgz Installing /packages/All/p5-Locale-libintl-1.31.tgz Installing /packages/All/p5-Text-Unidecode-1.30.tgz Installing /packages/All/p5-Unicode-EastAsianWidth-1.40.tgz Installing /packages/All/texinfo-6.6_2,1.tgz Installing /packages/All/libunistring-0.9.10_1.tgz Installing /packages/All/libidn2-2.2.0.tgz Installing /packages/All/wget-1.20.3.tgz Installing /packages/All/m4-1.4.18_1,1.tgz Installing /packages/All/autoconf-wrapper-20131203.tgz Installing /packages/All/autoconf-2.69_3.tgz Installing /packages/All/automake-1.16.1_2.tgz Installing /packages/All/libtool-2.4.6_1.tgz Installing /packages/All/libtextstyle-0.20.1.tgz Installing /packages/All/bison-3.4.1,1.tgz Installing /packages/All/gmake-4.2.1_3.tgz Installing /packages/All/python27-2.7.16_1.tgz Message from python27-2.7.16_1: =========================================================================== Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter =========================================================================== SUCCEEDED 00:00:19 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- x SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- x SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- x SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- x===> Fetching all distfiles required by xtensa-esp32-elf-1.22.0.g20171219_3 for building SUCCEEDED 00:00:03 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- x===> Fetching all distfiles required by xtensa-esp32-elf-1.22.0.g20171219_3 for building => SHA256 Checksum OK for binutils-2.25.1.tar.bz2. => SHA256 Checksum OK for expat-2.1.0.tar.gz. => SHA256 Checksum OK for gcc-5.2.0.tar.bz2. => SHA256 Checksum OK for gdb-7.10.tar.xz. => SHA256 Checksum OK for gmp-6.0.0a.tar.xz. => SHA256 Checksum OK for isl-0.14.tar.xz. => SHA256 Checksum OK for mpc-1.0.3.tar.gz. => SHA256 Checksum OK for mpfr-3.1.3.tar.xz. => SHA256 Checksum OK for ncurses-6.0.tar.gz. => SHA256 Checksum OK for newlib-2.2.0.tar.gz. => SHA256 Checksum OK for espressif-crosstool-NG-1.22.0.g20171219-1.22.0-80-g6c4433a5_GH0.tar.gz. SUCCEEDED 00:00:07 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- x SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- x===> Fetching all distfiles required by xtensa-esp32-elf-1.22.0.g20171219_3 for building ===> Extracting for xtensa-esp32-elf-1.22.0.g20171219_3 => SHA256 Checksum OK for binutils-2.25.1.tar.bz2. => SHA256 Checksum OK for expat-2.1.0.tar.gz. => SHA256 Checksum OK for gcc-5.2.0.tar.bz2. => SHA256 Checksum OK for gdb-7.10.tar.xz. => SHA256 Checksum OK for gmp-6.0.0a.tar.xz. => SHA256 Checksum OK for isl-0.14.tar.xz. => SHA256 Checksum OK for mpc-1.0.3.tar.gz. => SHA256 Checksum OK for mpfr-3.1.3.tar.xz. => SHA256 Checksum OK for ncurses-6.0.tar.gz. => SHA256 Checksum OK for newlib-2.2.0.tar.gz. => SHA256 Checksum OK for espressif-crosstool-NG-1.22.0.g20171219-1.22.0-80-g6c4433a5_GH0.tar.gz. /bin/mkdir -p /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5/.build/tarballs ln -s /distfiles/binutils-2.25.1.tar.bz2 /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5/.build/tarballs ln -s /distfiles/expat-2.1.0.tar.gz /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5/.build/tarballs ln -s /distfiles/gcc-5.2.0.tar.bz2 /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5/.build/tarballs ln -s /distfiles/gdb-7.10.tar.xz /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5/.build/tarballs ln -s /distfiles/gmp-6.0.0a.tar.xz /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5/.build/tarballs ln -s /distfiles/isl-0.14.tar.xz /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5/.build/tarballs ln -s /distfiles/mpc-1.0.3.tar.gz /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5/.build/tarballs ln -s /distfiles/mpfr-3.1.3.tar.xz /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5/.build/tarballs ln -s /distfiles/ncurses-6.0.tar.gz /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5/.build/tarballs ln -s /distfiles/newlib-2.2.0.tar.gz /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5/.build/tarballs echo CT_LOG_PROGRESS_BAR=n >> /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5/samples/xtensa-esp32-elf/crosstool.config Extracted Memory Use: 13.74M SUCCEEDED 00:00:06 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- x SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- x===> Patching for xtensa-esp32-elf-1.22.0.g20171219_3 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- x SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- x SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- x===> Configuring for xtensa-esp32-elf-1.22.0.g20171219_3 cd /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5 && ./bootstrap Running autoconf... fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). Done. You may now run: ./configure /usr/bin/printf "#!/bin/sh\necho 'crosstool-ng-1.22.0-80-g6c4433a5'\n" > /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5/version.sh /bin/chmod -w+x /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5/version.sh cd /construction/devel/xtensa-esp32-elf/crosstool-NG-1.22.0-80-g6c4433a5 && ./configure --enable-local --with-grep=/usr/local/bin/grep checking build system type... x86_64-unknown-dragonfly5.7 checking host system type... x86_64-unknown-dragonfly5.7 checking for a BSD-compatible install... /usr/bin/install -c checking for grep that handles long lines and -e... (cached) /usr/local/bin/grep checking for egrep... /usr/local/bin/grep -E checking for a sed that does not truncate output... /usr/local/bin/gsed checking whether sed understands -r -i -e... yes checking whether ln -s works... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking how to run the C preprocessor... gcc -E checking for ranlib... ranlib checking for gobjcopy... no checking for objcopy... objcopy checking for absolute path to objcopy... /usr/bin/objcopy checking for gobjdump... no checking for objdump... objdump checking for absolute path to objdump... /usr/bin/objdump checking for greadelf... no checking for readelf... readelf checking for absolute path to readelf... /usr/bin/readelf checking for gperf... gperf checking for absolute path to gperf... /usr/local/bin/gperf checking for bison... bison checking for flex... flex checking for makeinfo... makeinfo checking for cut... cut checking for stat... stat checking for readlink... readlink checking for wget... wget checking for tar... tar checking for gzip... gzip checking for bzip2... bzip2 checking for help2man... help2man checking for gpatch... gpatch checking for absolute path to gpatch... /usr/local/bin/gpatch checking for bash >= 3.1... /usr/local/bin/bash checking for GNU awk... /usr/local/bin/gawk checking for GNU make >= 3.80... /usr/local/bin/gmake checking whether /usr/local/bin/gmake sets $(MAKE)... yes checking for make 3.81... no checking for GNU libtool >= 1.5.26... /usr/local/bin/libtool checking for GNU libtoolize >= 1.5.26... /usr/local/bin/libtoolize checking for GNU automake >= 1.10... /usr/local/bin/automake checking for the type used in gperf declarations... unsigned int checking for xz... xz checking for cvs... cvs checking for svn... no checking for inline... inline checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible realloc... yes checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking libintl.h usability... no checking libintl.h presence... no checking for libintl.h... no checking for library containing bindtextdomain... no checking ncurses/ncurses.h usability... no checking ncurses/ncurses.h presence... no checking for ncurses/ncurses.h... no checking ncurses/curses.h usability... no checking ncurses/curses.h presence... no checking for ncurses/curses.h... no checking ncursesw/curses.h usability... no checking ncursesw/curses.h presence... no checking for ncursesw/curses.h... no checking ncurses.h usability... no checking ncurses.h presence... no checking for ncurses.h... no checking curses.h usability... no checking curses.h presence... no checking for curses.h... no configure: error: could not find curses header, required for the kconfig frontends *** Error code 1 Stop. make: stopped in /xports/devel/xtensa-esp32-elf FAILED 00:00:06