------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/libnghttp2-1.41.0.txz Installing /packages/All/ca_root_nss-3.58.txz ===== Message from ca_root_nss-3.58: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/openssl-1.1.1h_1,1.txz Installing /packages/All/curl-7.73.0.txz Installing /packages/All/expat-2.2.8.txz Installing /packages/All/libuv-1.40.0.txz Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gettext-runtime-0.21.txz Installing /packages/All/rhash-1.3.9.txz Installing /packages/All/liblz4-1.9.2_1,1.txz Installing /packages/All/lzo2-2.10_1.txz Installing /packages/All/libarchive-3.4.3,1.txz Installing /packages/All/ncurses-6.2.20201017.txz Installing /packages/All/cmake-3.18.4.txz Installing /packages/All/h3-3.7.1.txz Installing /packages/All/libffi-3.3_1.txz Installing /packages/All/readline-8.0.4.txz Installing /packages/All/python27-2.7.18_1.txz ===== Message from python27-2.7.18_1: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3 databases/py-sqlite3 tkinter x11-toolkits/py-tkinter Installing /packages/All/py27-setuptools-44.0.0.txz ===== Message from py27-setuptools-44.0.0: -- Only /usr/local/bin/easy_install-2.7 script has been installed since Python 2.7 is not the default Python version. -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/py27-pyparsing-2.4.7.txz ===== Message from py27-pyparsing-2.4.7: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/py27-six-1.15.0.txz ===== Message from py27-six-1.15.0: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/py27-packaging-20.4.txz ===== Message from py27-packaging-20.4: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/py27-wheel-0.30.0_1.txz ===== Message from py27-wheel-0.30.0_1: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/py27-scikit-build-0.11.1.txz ===== Message from py27-scikit-build-0.11.1: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/py27-cython-0.29.21.txz ===== Message from py27-cython-0.29.21: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/gmp-6.2.0.txz Installing /packages/All/mpfr-4.1.0.txz Installing /packages/All/metis-5.1.0_8.txz ===== Message from metis-5.1.0_8: -- ===> NOTICE: The metis port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/tbb-2020.3.txz Installing /packages/All/mpc-1.1.0_2.txz UNFLAVORED devel/binutils -> use devel/binutils@native Installing /packages/All/binutils-2.33.1_3,1.txz ===== Message from binutils-2.33.1_3,1: -- ===> NOTICE: The binutils port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/gcc8-8.4.0.txz ===== Message from gcc8-8.4.0: -- To ensure binaries built with this toolchain find appropriate versions of the necessary run-time libraries, you may want to link using -Wl,-rpath=/usr/local/lib/gcc8 For ports leveraging USE_GCC, USES=compiler, or USES=fortran this happens transparently. Installing /packages/All/openblas-0.3.10,1.txz Installing /packages/All/suitesparse-5.8.1.txz Installing /packages/All/py27-numpy-1.16.6,1.txz ===== Message from py27-numpy-1.16.6,1: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. UNFLAVORED devel/binutils -> use devel/binutils@native SUCCEEDED 00:00:44 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> py27-h3-3.7.0 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. ===> py27-h3-3.7.0 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by py27-h3-3.7.0 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. ===> py27-h3-3.7.0 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by py27-h3-3.7.0 for building => SHA256 Checksum OK for h3-3.7.0.tar.gz. SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. ===> py27-h3-3.7.0 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by py27-h3-3.7.0 for building ===> Extracting for py27-h3-3.7.0 => SHA256 Checksum OK for h3-3.7.0.tar.gz. Extracted Memory Use: 45.27M SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for py27-h3-3.7.0 ===> Applying ports patches for py27-h3-3.7.0 from /xports/graphics/py-h3/files SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> py27-h3-3.7.0 depends on executable: cmake - found ===> py27-h3-3.7.0 depends on package: h3>=3.7.0 - found ===> py27-h3-3.7.0 depends on package: py27-scikit-build>=0 - found ===> py27-h3-3.7.0 depends on executable: cython-2.7 - found ===> py27-h3-3.7.0 depends on package: py27-setuptools>0 - found ===> py27-h3-3.7.0 depends on file: /usr/local/bin/python2.7 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- ===> py27-h3-3.7.0 depends on shared library: libh3.so - found (/usr/local/lib/libh3.so) SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> py27-h3-3.7.0 depends on executable: cmake - found ===> py27-h3-3.7.0 depends on package: h3>=3.7.0 - found ===> py27-h3-3.7.0 depends on package: py27-scikit-build>=0 - found ===> py27-h3-3.7.0 depends on executable: cython-2.7 - found ===> py27-h3-3.7.0 depends on package: py27-setuptools>0 - found ===> py27-h3-3.7.0 depends on file: /usr/local/bin/python2.7 - found ===> py27-h3-3.7.0 depends on shared library: libh3.so - found (/usr/local/lib/libh3.so) ===> Configuring for py27-h3-3.7.0 running config SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for py27-h3-3.7.0 -------------------------------------------------------------------------------- -- Trying "Ninja" generator -------------------------------- --------------------------- ---------------------- ----------------- ------------ ------- -- Not searching for unused variables given on the command line. CMake Error: CMake was unable to find a build program corresponding to "Ninja". CMAKE_MAKE_PROGRAM is not set. You probably need to select a different build tool. -- Configuring incomplete, errors occurred! See also "/construction/graphics/py-h3/h3-3.7.0/_cmake_test_compile/build/CMakeFiles/CMakeOutput.log". -- ------- ------------ ----------------- ---------------------- --------------------------- -------------------------------- -- Trying "Ninja" generator - failure -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- Trying "Unix Makefiles" generator -------------------------------- --------------------------- ---------------------- ----------------- ------------ ------- -- Not searching for unused variables given on the command line. -- The C compiler identification is GNU 8.3.0 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /usr/bin/cc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Configuring done -- Generating done -- Build files have been written to: /construction/graphics/py-h3/h3-3.7.0/_cmake_test_compile/build -- ------- ------------ ----------------- ---------------------- --------------------------- -------------------------------- -- Trying "Unix Makefiles" generator - success -------------------------------------------------------------------------------- Configuring Project Working directory: /construction/graphics/py-h3/h3-3.7.0/_skbuild/dragonfly-5.9-x86_64-2.7/cmake-build Command: cmake /construction/graphics/py-h3/h3-3.7.0 -G 'Unix Makefiles' -DCMAKE_INSTALL_PREFIX:PATH=/construction/graphics/py-h3/h3-3.7.0/_skbuild/dragonfly-5.9-x86_64-2.7/cmake-install -DPYTHON_EXECUTABLE:FILEPATH=/usr/local/bin/python2.7 -DPYTHON_VERSION_STRING:STRING=2.7.18 -DPYTHON_INCLUDE_DIR:PATH=/usr/local/include/python2.7 -DPYTHON_LIBRARY:FILEPATH=/usr/local/lib/libpython2.7.so -DSKBUILD:BOOL=TRUE -DCMAKE_MODULE_PATH:PATH=/usr/local/lib/python2.7/site-packages/skbuild/resources/cmake -DCMAKE_BUILD_TYPE:STRING=Release -- The C compiler identification is GNU 8.3.0 -- The CXX compiler identification is GNU 8.3.0 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /usr/bin/cc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done -- Found PythonInterp: /usr/local/bin/python2.7 (found version "2.7.18") CMake Error at /usr/local/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:165 (message): Could NOT find Cython (missing: CYTHON_EXECUTABLE) Call Stack (most recent call first): /usr/local/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:458 (_FPHSA_FAILURE_MESSAGE) /usr/local/lib/python2.7/site-packages/skbuild/resources/cmake/FindCython.cmake:73 (FIND_PACKAGE_HANDLE_STANDARD_ARGS) src/h3/_cy/CMakeLists.txt:1 (find_package) -- Configuring incomplete, errors occurred! See also "/construction/graphics/py-h3/h3-3.7.0/_skbuild/dragonfly-5.9-x86_64-2.7/cmake-build/CMakeFiles/CMakeOutput.log". Traceback (most recent call last): File "/usr/local/lib/python2.7/site-packages/skbuild/setuptools_wrap.py", line 586, in setup languages=cmake_languages File "/usr/local/lib/python2.7/site-packages/skbuild/cmaker.py", line 240, in configure os.path.abspath(CMAKE_BUILD_DIR()))) An error occurred while configuring with CMake. Command: cmake /construction/graphics/py-h3/h3-3.7.0 -G 'Unix Makefiles' -DCMAKE_INSTALL_PREFIX:PATH=/construction/graphics/py-h3/h3-3.7.0/_skbuild/dragonfly-5.9-x86_64-2.7/cmake-install -DPYTHON_EXECUTABLE:FILEPATH=/usr/local/bin/python2.7 -DPYTHON_VERSION_STRING:STRING=2.7.18 -DPYTHON_INCLUDE_DIR:PATH=/usr/local/include/python2.7 -DPYTHON_LIBRARY:FILEPATH=/usr/local/lib/libpython2.7.so -DSKBUILD:BOOL=TRUE -DCMAKE_MODULE_PATH:PATH=/usr/local/lib/python2.7/site-packages/skbuild/resources/cmake -DCMAKE_BUILD_TYPE:STRING=Release Source directory: /construction/graphics/py-h3/h3-3.7.0 Working directory: /construction/graphics/py-h3/h3-3.7.0/_skbuild/dragonfly-5.9-x86_64-2.7/cmake-build Please see CMake's output for more information. *** Error code 1 Stop. make: stopped in /xports/graphics/py-h3 FAILED 00:00:03