------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/freetype2-2.10.2.txz ===== Message from freetype2-2.10.2: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). Installing /packages/All/expat-2.2.8.txz Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gettext-runtime-0.20.2.txz Installing /packages/All/fontconfig-2.13.92_2,1.txz Running fc-cache to build fontconfig cache... Font directories: /usr/local/share/fonts /usr/local/lib/X11/fonts /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded Installing /packages/All/libinotify-20180201_2.txz ===== Message from libinotify-20180201_2: -- Libinotify functionality on FreeBSD is missing support for - detecting a file being moved into or out of a directory within the same filesystem - certain modifications to a symbolic link (rather than the file it points to.) in addition to the known limitations on all platforms using kqueue(2) where various open and close notifications are unimplemented. This means the following regression tests will fail: Directory notifications: IN_MOVED_FROM IN_MOVED_TO Open/close notifications: IN_OPEN IN_CLOSE_NOWRITE IN_CLOSE_WRITE Symbolic Link notifications: IN_DONT_FOLLOW IN_ATTRIB IN_MOVE_SELF IN_DELETE_SELF Kernel patches to address the missing directory and symbolic link notifications are available from: https://github.com/libinotify-kqueue/libinotify-kqueue/tree/master/patches You might want to consider increasing the kern.maxfiles tunable if you plan to use this library for applications that need to monitor activity of a lot of files. Installing /packages/All/alsa-lib-1.1.2_2.txz ===== Message from alsa-lib-1.1.2_2: -- ===> NOTICE: The alsa-lib port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/giflib-5.2.1.txz Installing /packages/All/javavmwrapper-2.7.5.txz Installing /packages/All/libfontenc-1.1.4.txz Installing /packages/All/mkfontscale-1.2.1.txz Installing /packages/All/dejavu-2.37_1.txz ===== Message from dejavu-2.37_1: -- Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Installing /packages/All/java-zoneinfo-2020.a.txz Installing /packages/All/libXau-1.0.9.txz Installing /packages/All/libxml2-2.9.10.txz Installing /packages/All/libpthread-stubs-0.4.txz Installing /packages/All/xorgproto-2020.1.txz Installing /packages/All/libXdmcp-1.1.3.txz Installing /packages/All/libxcb-1.13.1.txz Installing /packages/All/libX11-1.6.9_1,1.txz Installing /packages/All/libXext-1.3.4,1.txz Installing /packages/All/libXfixes-5.0.3_2.txz Installing /packages/All/libXi-1.7.10,1.txz Installing /packages/All/libXrender-0.9.10_2.txz Installing /packages/All/libICE-1.0.10,1.txz Installing /packages/All/libSM-1.2.3,1.txz Installing /packages/All/libXt-1.2.0,1.txz Installing /packages/All/libXtst-1.2.3_2.txz Installing /packages/All/openjdk8-8.252.09.1.txz ===== Message from openjdk8-8.252.09.1: -- This OpenJDK implementation requires procfs(5) mounted on /proc. If you have not done it yet, please do the following: mount -t procfs proc /proc To make it permanent, you need the following line in /etc/fstab: proc /proc procfs rw 0 0 Installing /packages/All/png-1.6.37.txz Installing /packages/All/pcre-8.44.txz Installing /packages/All/libffi-3.2.1_3.txz Installing /packages/All/libiconv-1.16.txz Installing /packages/All/ncurses-6.1.20190525.txz Installing /packages/All/readline-8.0.4.txz Installing /packages/All/openssl-1.1.1g,1.txz Installing /packages/All/python37-3.7.7_1.txz ===== Message from python37-3.7.7_1: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py37-gdbm databases/py-gdbm@py37 py37-sqlite3 databases/py-sqlite3@py37 py37-tkinter x11-toolkits/py-tkinter@py37 Installing /packages/All/glib-2.56.3_7,1.txz No schema files found: doing nothing. Installing /packages/All/wayland-1.18.0.txz Installing /packages/All/pciids-20200529.txz Installing /packages/All/libpciaccess-0.16.txz Installing /packages/All/libdrm-2.4.101.txz Installing /packages/All/libunwind-20200331.txz Installing /packages/All/libelf-0.8.13_3.txz Installing /packages/All/libXdamage-1.1.5.txz Installing /packages/All/libxshmfence-1.3.txz Installing /packages/All/libXxf86vm-1.1.4_3.txz Installing /packages/All/libXrandr-1.5.2.txz Installing /packages/All/mesa-libs-19.0.8_1.txz Installing /packages/All/pixman-0.40.0.txz Installing /packages/All/cairo-1.16.0,2.txz Installing /packages/All/graphite2-1.3.14.txz Installing /packages/All/harfbuzz-2.6.7.txz Installing /packages/All/fribidi-0.19.7.txz Installing /packages/All/font-bh-ttf-1.0.3_4.txz Installing /packages/All/font-misc-meltho-1.0.3_4.txz Installing /packages/All/font-misc-ethiopic-1.0.3_4.txz Installing /packages/All/encodings-1.0.5,1.txz Installing /packages/All/xorg-fonts-truetype-7.7_1.txz Installing /packages/All/libXft-2.3.3.txz Installing /packages/All/pango-1.42.4_3.txz Installing /packages/All/perl5-5.30.3.txz ===== Message from perl5-5.30.3: -- The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Installing /packages/All/rrdtool-1.7.2_2.txz SUCCEEDED 00:00:54 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- Installation settings: Location of JDK: /usr/local/openjdk8 Location of Java port: java/openjdk8 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> jrrd-1.0.8_1 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- Installation settings: Location of JDK: /usr/local/openjdk8 Location of Java port: java/openjdk8 ===> jrrd-1.0.8_1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by jrrd-1.0.8_1 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- Installation settings: Location of JDK: /usr/local/openjdk8 Location of Java port: java/openjdk8 ===> jrrd-1.0.8_1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by jrrd-1.0.8_1 for building => SHA256 Checksum OK for jrrd-1.0.8.tar.gz. SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- Installation settings: Location of JDK: /usr/local/openjdk8 Location of Java port: java/openjdk8 ===> jrrd-1.0.8_1 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by jrrd-1.0.8_1 for building ===> Extracting for jrrd-1.0.8_1 => SHA256 Checksum OK for jrrd-1.0.8.tar.gz. Extracted Memory Use: 1.44M SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for jrrd-1.0.8_1 ===> Applying ports patches for jrrd-1.0.8_1 from /xports/databases/jrrd/files SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> jrrd-1.0.8_1 depends on file: /usr/local/openjdk8/bin/java - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- ===> jrrd-1.0.8_1 depends on shared library: librrd.so - found (/usr/local/lib/librrd.so) SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> jrrd-1.0.8_1 depends on file: /usr/local/openjdk8/bin/java - found ===> jrrd-1.0.8_1 depends on shared library: librrd.so - found (/usr/local/lib/librrd.so) ===> Configuring for jrrd-1.0.8_1 configure: loading site script /xports/Templates/config.site checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p checking for gawk... (cached) /usr/bin/awk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for style of include used by make... GNU checking for gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking dependency style of cc... gcc3 checking for ar... ar checking the archiver (ar) interface... ar checking for gcc... (cached) cc checking whether we are using the GNU C compiler... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to accept ISO C89... (cached) none needed checking dependency style of cc... (cached) gcc3 checking whether ln -s works... yes checking build system type... x86_64-portbld-dragonfly5.9 checking host system type... x86_64-portbld-dragonfly5.9 checking how to print strings... printf checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for fgrep... (cached) /usr/bin/fgrep checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking the maximum length of command line arguments... (cached) 262144 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... no checking how to convert x86_64-portbld-dragonfly5.9 file names to x86_64-portbld-dragonfly5.9 format... func_convert_file_noop checking how to convert x86_64-portbld-dragonfly5.9 file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from cc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... cpp checking for ANSI C header files... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for dlfcn.h... (cached) yes checking for objdir... .libs checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC -DPIC checking if cc PIC flag -fPIC -DPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking if cc supports -c -o file.o... (cached) yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... dragonfly5.9 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for rrdtool... /usr/local/bin/rrdtool configure: searching for a 1.4 JDK configure: trying the value in JAVA_HOME configure: checking if /usr/local/openjdk8 is home for a valid 1.4 JDK checking if /usr/local/openjdk8 has java... yes checking if /usr/local/openjdk8 has javac... yes checking if /usr/local/openjdk8 has jar... yes checking if /usr/local/openjdk8 has javah... yes checking if java version meets requirements for 1.4... Shared object "libjli.so" not found, required by "javac" Shared object "libjli.so" not found, required by "java" no, version is configure: no valid JDK found at /usr/local/openjdk8 checking for java... /usr/local/bin/java configure: attempting to find the JDK for /usr/local/bin/javavm. configure: checking if /usr/local is home for a valid 1.4 JDK checking if /usr/local has java... yes checking if /usr/local has javac... yes checking if /usr/local has jar... yes checking if /usr/local has javah... yes checking if java version meets requirements for 1.4... Shared object "libjli.so" not found, required by "javac" Shared object "libjli.so" not found, required by "java" no, version is configure: no valid JDK found at /usr/local configure: error: unable to find a valid JDK for java version 1.4 ===> Script "configure" failed unexpectedly. Please report the problem to danilo@FreeBSD.org [maintainer] and attach the "/construction/databases/jrrd/jrrd-1.0.8/config.log" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. a /usr/local/sbin/pkg-static info -g -Ea). *** Error code 1 Stop. make: stopped in /xports/databases/jrrd FAILED 00:00:03