------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gettext-runtime-0.20.2.txz Installing /packages/All/gmake-4.3_2.txz Installing /packages/All/libiconv-1.16.txz Installing /packages/All/libinotify-20180201_2.txz ===== Message from libinotify-20180201_2: -- Libinotify functionality on FreeBSD is missing support for - detecting a file being moved into or out of a directory within the same filesystem - certain modifications to a symbolic link (rather than the file it points to.) in addition to the known limitations on all platforms using kqueue(2) where various open and close notifications are unimplemented. This means the following regression tests will fail: Directory notifications: IN_MOVED_FROM IN_MOVED_TO Open/close notifications: IN_OPEN IN_CLOSE_NOWRITE IN_CLOSE_WRITE Symbolic Link notifications: IN_DONT_FOLLOW IN_ATTRIB IN_MOVE_SELF IN_DELETE_SELF Kernel patches to address the missing directory and symbolic link notifications are available from: https://github.com/libinotify-kqueue/libinotify-kqueue/tree/master/patches You might want to consider increasing the kern.maxfiles tunable if you plan to use this library for applications that need to monitor activity of a lot of files. Installing /packages/All/mm-1.4.2_1.txz SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> smstools-3.1.21 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> smstools-3.1.21 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by smstools-3.1.21 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> smstools-3.1.21 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by smstools-3.1.21 for building => SHA256 Checksum OK for smstools3-3.1.21.tar.gz. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> smstools-3.1.21 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by smstools-3.1.21 for building ===> Extracting for smstools-3.1.21 => SHA256 Checksum OK for smstools3-3.1.21.tar.gz. Extracted Memory Use: 1.64M SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for smstools-3.1.21 ===> Applying ports patches for smstools-3.1.21 from /xports/comms/smstools3/files SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> smstools-3.1.21 depends on package: gmake>=4.3 - found ===> smstools-3.1.21 depends on package: libiconv>=1.14_11 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- ===> smstools-3.1.21 depends on shared library: libinotify.so - found (/usr/local/lib/libinotify.so) ===> smstools-3.1.21 depends on shared library: libmm.so - found (/usr/local/lib/libmm.so) SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> smstools-3.1.21 depends on package: gmake>=4.3 - found ===> smstools-3.1.21 depends on package: libiconv>=1.14_11 - found ===> smstools-3.1.21 depends on shared library: libinotify.so - found (/usr/local/lib/libinotify.so) ===> smstools-3.1.21 depends on shared library: libmm.so - found (/usr/local/lib/libmm.so) ===> Configuring for smstools-3.1.21 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for smstools-3.1.21 gmake[1]: Entering directory '/construction/comms/smstools3/smstools3' cd src && gmake gmake[2]: Entering directory '/construction/comms/smstools3/smstools3/src' cc -pipe -DUSE_ICONV -DLIBICONV_PLUG -O2 -isystem /usr/local/include -fno-strict-aliasing -DNUMBER_OF_MODEMS=64 -W -Wall -D_FILE_OFFSET_BITS=64 -DLIBICONV_PLUG -isystem /usr/local/include -c -o extras.o extras.c cc -pipe -DUSE_ICONV -DLIBICONV_PLUG -O2 -isystem /usr/local/include -fno-strict-aliasing -DNUMBER_OF_MODEMS=64 -W -Wall -D_FILE_OFFSET_BITS=64 -DLIBICONV_PLUG -isystem /usr/local/include -c -o locking.o locking.c cc -pipe -DUSE_ICONV -DLIBICONV_PLUG -O2 -isystem /usr/local/include -fno-strict-aliasing -DNUMBER_OF_MODEMS=64 -W -Wall -D_FILE_OFFSET_BITS=64 -DLIBICONV_PLUG -isystem /usr/local/include -c -o cfgfile.o cfgfile.c cc -pipe -DUSE_ICONV -DLIBICONV_PLUG -O2 -isystem /usr/local/include -fno-strict-aliasing -DNUMBER_OF_MODEMS=64 -W -Wall -D_FILE_OFFSET_BITS=64 -DLIBICONV_PLUG -isystem /usr/local/include -c -o logging.o logging.c cc -pipe -DUSE_ICONV -DLIBICONV_PLUG -O2 -isystem /usr/local/include -fno-strict-aliasing -DNUMBER_OF_MODEMS=64 -W -Wall -D_FILE_OFFSET_BITS=64 -DLIBICONV_PLUG -isystem /usr/local/include -c -o alarm.o alarm.c cc -pipe -DUSE_ICONV -DLIBICONV_PLUG -O2 -isystem /usr/local/include -fno-strict-aliasing -DNUMBER_OF_MODEMS=64 -W -Wall -D_FILE_OFFSET_BITS=64 -DLIBICONV_PLUG -isystem /usr/local/include -c -o smsd_cfg.o smsd_cfg.c cc -pipe -DUSE_ICONV -DLIBICONV_PLUG -O2 -isystem /usr/local/include -fno-strict-aliasing -DNUMBER_OF_MODEMS=64 -W -Wall -D_FILE_OFFSET_BITS=64 -DLIBICONV_PLUG -isystem /usr/local/include -c -o charset.o charset.c cc -pipe -DUSE_ICONV -DLIBICONV_PLUG -O2 -isystem /usr/local/include -fno-strict-aliasing -DNUMBER_OF_MODEMS=64 -W -Wall -D_FILE_OFFSET_BITS=64 -DLIBICONV_PLUG -isystem /usr/local/include -c -o stats.o stats.c cc -pipe -DUSE_ICONV -DLIBICONV_PLUG -O2 -isystem /usr/local/include -fno-strict-aliasing -DNUMBER_OF_MODEMS=64 -W -Wall -D_FILE_OFFSET_BITS=64 -DLIBICONV_PLUG -isystem /usr/local/include -c -o blacklist.o blacklist.c cc -pipe -DUSE_ICONV -DLIBICONV_PLUG -O2 -isystem /usr/local/include -fno-strict-aliasing -DNUMBER_OF_MODEMS=64 -W -Wall -D_FILE_OFFSET_BITS=64 -DLIBICONV_PLUG -isystem /usr/local/include -c -o whitelist.o whitelist.c cc -pipe -DUSE_ICONV -DLIBICONV_PLUG -O2 -isystem /usr/local/include -fno-strict-aliasing -DNUMBER_OF_MODEMS=64 -W -Wall -D_FILE_OFFSET_BITS=64 -DLIBICONV_PLUG -isystem /usr/local/include -c -o modeminit.o modeminit.c cc -pipe -DUSE_ICONV -DLIBICONV_PLUG -O2 -isystem /usr/local/include -fno-strict-aliasing -DNUMBER_OF_MODEMS=64 -W -Wall -D_FILE_OFFSET_BITS=64 -DLIBICONV_PLUG -isystem /usr/local/include -c -o pdu.o pdu.c stats.c: In function 'savestats': stats.c:154:26: warning: '/stats.tmp' directive writing 10 bytes into a region of size between 1 and 1024 [-Wformat-overflow=] sprintf(filename, "%s/stats.tmp", d_stats); ^~~~~~~~~~ stats.c:154:5: note: 'sprintf' output between 11 and 1034 bytes into a destination of size 1024 sprintf(filename, "%s/stats.tmp", d_stats); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ stats.c: In function 'loadstats': stats.c:183:26: warning: '/stats.tmp' directive writing 10 bytes into a region of size between 1 and 1024 [-Wformat-overflow=] sprintf(filename, "%s/stats.tmp", d_stats); ^~~~~~~~~~ stats.c:183:5: note: 'sprintf' output between 11 and 1034 bytes into a destination of size 1024 sprintf(filename, "%s/stats.tmp", d_stats); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc -pipe -DUSE_ICONV -DLIBICONV_PLUG -O2 -isystem /usr/local/include -fno-strict-aliasing -DNUMBER_OF_MODEMS=64 -W -Wall -D_FILE_OFFSET_BITS=64 -DLIBICONV_PLUG -isystem /usr/local/include -c -o charshift.o charshift.c logging.c: In function 'writelogfile': logging.c:200:49: warning: '%s' directive output may be truncated writing up to 16383 bytes into a region of size between 16298 and 16378 [-Wformat-truncation=] snprintf(text2, sizeof(text2),"%s,%i, %s: %s\n", timestamp, severity, process_title, text); ^~ ~~~~ logging.c:200:7: note: 'snprintf' output between 8 and 16471 bytes into a destination of size 16384 snprintf(text2, sizeof(text2),"%s,%i, %s: %s\n", timestamp, severity, process_title, text); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ logging.c:254:47: warning: '%s' directive output may be truncated writing up to 16383 bytes into a region of size between 16298 and 16378 [-Wformat-truncation=] snprintf(text2, sizeof(text2),"%s,%i, %s: %s\n", timestamp, severity, process_title, text); ^~ ~~~~ logging.c:254:5: note: 'snprintf' output between 8 and 16471 bytes into a destination of size 16384 snprintf(text2, sizeof(text2),"%s,%i, %s: %s\n", timestamp, severity, process_title, text); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ stats.c: In function 'update_message_counter': stats.c:324:29: warning: '.counter' directive writing 8 bytes into a region of size between 0 and 1023 [-Wformat-overflow=] sprintf(filename, "%s/%s.counter", d_stats, modemname); ^~~~~~~~ stats.c:324:5: note: 'sprintf' output 10 or more bytes (assuming 1033) into a destination of size 1024 sprintf(filename, "%s/%s.counter", d_stats, modemname); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ stats.c: In function 'write_status': stats.c:376:29: warning: '/status.tmp' directive writing 11 bytes into a region of size between 1 and 1024 [-Wformat-overflow=] sprintf(fname_tmp, "%s/status.tmp", d_stats); ^~~~~~~~~~~ stats.c:376:7: note: 'sprintf' output between 12 and 1035 bytes into a destination of size 1024 sprintf(fname_tmp, "%s/status.tmp", d_stats); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ stats.c:467:27: warning: '/status' directive writing 7 bytes into a region of size between 1 and 1024 [-Wformat-overflow=] sprintf(fname, "%s/status", d_stats); ^~~~~~~ stats.c:467:9: note: 'sprintf' output between 8 and 1031 bytes into a destination of size 1024 sprintf(fname, "%s/status", d_stats); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ charset.c: In function 'decode_7bit_packed': charset.c:904:42: warning: '%s' directive output may be truncated writing up to 511 bytes into a region of size between 509 and 510 [-Wformat-truncation=] snprintf(buffer2, sizeof(buffer2), "%02X%s", septets, buffer); ^~ ~~~~~~ charset.c:904:2: note: 'snprintf' output between 3 and 515 bytes into a destination of size 512 snprintf(buffer2, sizeof(buffer2), "%02X%s", septets, buffer); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ extras.c: In function 'my_system': extras.c:1077:35: warning: '/smsd_' directive output may be truncated writing 6 bytes into a region of size between 0 and 1023 [-Wformat-truncation=] snprintf(tmp1, sizeof(tmp1), ">%s/smsd_%s_1.XXXXXX", tmpdir, info); ^~~~~~ extras.c:1077:2: note: 'snprintf' output 17 or more bytes (assuming 1040) into a destination of size 1024 snprintf(tmp1, sizeof(tmp1), ">%s/smsd_%s_1.XXXXXX", tmpdir, info); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ extras.c:1087:34: warning: '%s' directive output may be truncated writing up to 1023 bytes into a region of size 1022 [-Wformat-truncation=] snprintf(tmp2, sizeof(tmp2), "2>%s/smsd_%s_2.XXXXXX", tmpdir, info); ^~ ~~~~~~ extras.c:1087:2: note: 'snprintf' output 18 or more bytes (assuming 1041) into a destination of size 1024 snprintf(tmp2, sizeof(tmp2), "2>%s/smsd_%s_2.XXXXXX", tmpdir, info); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ extras.c: In function 'make_datetime_string': extras.c:1670:41: warning: '%03d' directive output may be truncated writing between 3 and 8 bytes into a region of size 7 [-Wformat-truncation=] snprintf(buffer, sizeof(buffer), "%03d", (int)tv.tv_usec / 1000); ^~~~ extras.c:1670:40: note: directive argument in the range [-2147483, 2147483] snprintf(buffer, sizeof(buffer), "%03d", (int)tv.tv_usec / 1000); ^~~~~~ extras.c:1670:7: note: 'snprintf' output between 4 and 9 bytes into a destination of size 7 snprintf(buffer, sizeof(buffer), "%03d", (int)tv.tv_usec / 1000); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ extras.c:1671:7: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] strncpy(p, buffer, strlen(buffer)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ extras.c:1666:7: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] strncpy(p, buffer, strlen(buffer)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ extras.c: In function 'copymovefilewithdestlock': extras.c:367:27: warning: 'XXXXXX' directive writing 6 bytes into a region of size between 0 and 1023 [-Wformat-overflow=] sprintf(newname,"%s/%sXXXXXX", directory, line); ^~~~~~ extras.c:367:5: note: 'sprintf' output 8 or more bytes (assuming 1031) into a destination of size 1024 sprintf(newname,"%s/%sXXXXXX", directory, line); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ pdu.c: In function 'get_pdu_details': pdu.c:1920:64: warning: '%s' directive output may be truncated writing up to 99 bytes into a region of size between 68 and 76 [-Wformat-truncation=] snprintf(buffer, sizeof(buffer), "%.03i %c %-8.8s %-8.8s %s%.03i %.03i/%.03i %c\n", mnumber, sort_ch, date, time, sender, m_id, p_number, p_count, (is_statusreport) ? 'r' : 'i'); ^~ ~~~~~~ pdu.c:1920:7: note: 'snprintf' output between 39 and 170 bytes into a destination of size 100 snprintf(buffer, sizeof(buffer), "%.03i %c %-8.8s %-8.8s %s%.03i %.03i/%.03i %c\n", mnumber, sort_ch, date, time, sender, m_id, p_number, p_count, (is_statusreport) ? 'r' : 'i'); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ modeminit.c: In function 'initmodem': modeminit.c:2055:34: warning: '%s' directive writing up to 499 bytes into a region of size 90 [-Wformat-overflow=] sprintf(command, "AT+CSCA=\"+%s\"\r", answer); ^~ ~~~~~~ modeminit.c:2055:5: note: 'sprintf' output between 13 and 512 bytes into a destination of size 100 sprintf(command, "AT+CSCA=\"+%s\"\r", answer); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ modeminit.c:2096:49: warning: '%s' directive output may be truncated writing up to 499 bytes into a region of size 100 [-Wformat-truncation=] snprintf(DEVICE.imei, sizeof(DEVICE.imei), "%s", answer); ^~ ~~~~~~ modeminit.c:2096:5: note: 'snprintf' output between 1 and 500 bytes into a destination of size 100 snprintf(DEVICE.imei, sizeof(DEVICE.imei), "%s", answer); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd_cfg.c: In function 'readcfg': smsd_cfg.c:2454:77: warning: '%s' directive output may be truncated writing up to 4095 bytes into a region of size 256 [-Wformat-truncation=] snprintf(communicate_a_keys[key], sizeof(communicate_a_keys[0]), "%s", value); ^~ ~~~~~ smsd_cfg.c:2454:11: note: 'snprintf' output between 1 and 4096 bytes into a destination of size 256 snprintf(communicate_a_keys[key], sizeof(communicate_a_keys[0]), "%s", value); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd_cfg.c:2156:21: warning: '%s' directive writing up to 4095 bytes into a region of size 1025 [-Wformat-overflow=] sprintf(p, "%s%c", value, 0); ^~ ~~~~~ smsd_cfg.c:2156:9: note: 'sprintf' output between 2 and 4097 bytes into a destination of size 1025 sprintf(p, "%s%c", value, 0); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd_cfg.c: In function 'startup_check': smsd_cfg.c:3262:57: warning: '%s' directive output may be truncated writing up to 1023 bytes into a region of size 16 [-Wformat-truncation=] snprintf(queues[x].numbers[y - 1], SIZE_NUM, "%s", tmp); ^~ ~~~ smsd_cfg.c:3262:11: note: 'snprintf' output between 1 and 1024 bytes into a destination of size 16 snprintf(queues[x].numbers[y - 1], SIZE_NUM, "%s", tmp); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd_cfg.c:3489:28: warning: '/smsd_data.XXXXXX' directive writing 17 bytes into a region of size between 1 and 1024 [-Wformat-overflow=] sprintf(tmp_data, "%s/smsd_data.XXXXXX", tmpdir); ^~~~~~~~~~~~~~~~~ smsd_cfg.c:3489:7: note: 'sprintf' output between 18 and 1041 bytes into a destination of size 1024 sprintf(tmp_data, "%s/smsd_data.XXXXXX", tmpdir); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd_cfg.c:3498:32: warning: '/smsd_script.XXXXXX' directive writing 19 bytes into a region of size between 1 and 1024 [-Wformat-overflow=] sprintf(tmp_script, "%s/smsd_script.XXXXXX", d_incoming); ^~~~~~~~~~~~~~~~~~~ smsd_cfg.c:3498:9: note: 'sprintf' output between 20 and 1043 bytes into a destination of size 1024 sprintf(tmp_script, "%s/smsd_script.XXXXXX", d_incoming); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from smsd_cfg.c:31: smsd_cfg.h:35:32: warning: '-concatenated' directive writing 13 bytes into a region of size between 0 and 1023 [-Wformat-overflow=] #define CONCATENATED_DIR_FNAME "%s/%s-concatenated" ^~~~~~~~~~~~~~~~~~~~ smsd_cfg.c:3582:24: note: in expansion of macro 'CONCATENATED_DIR_FNAME' sprintf(fname, CONCATENATED_DIR_FNAME, d_incoming, devices[x].name); ^~~~~~~~~~~~~~~~~~~~~~ smsd_cfg.c:3582:9: note: 'sprintf' output 15 or more bytes (assuming 1038) into a destination of size 1024 sprintf(fname, CONCATENATED_DIR_FNAME, d_incoming, devices[x].name); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from smsd_cfg.c:31: smsd_cfg.h:35:32: warning: '-concatenated' directive writing 13 bytes into a region of size between 0 and 1023 [-Wformat-overflow=] #define CONCATENATED_DIR_FNAME "%s/%s-concatenated" ^~~~~~~~~~~~~~~~~~~~ smsd_cfg.c:3593:26: note: in expansion of macro 'CONCATENATED_DIR_FNAME' sprintf(tmp, CONCATENATED_DIR_FNAME, d_saved, devices[x].name); ^~~~~~~~~~~~~~~~~~~~~~ smsd_cfg.c:3593:13: note: 'sprintf' output 15 or more bytes (assuming 1038) into a destination of size 1024 sprintf(tmp, CONCATENATED_DIR_FNAME, d_saved, devices[x].name); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd_cfg.c:3669:58: warning: '%s' directive writing up to 1023 bytes into a region of size 990 [-Wformat-overflow=] sprintf(buffer, "Default validity period is set to %s.", tmp); ^~ ~~~ smsd_cfg.c:3669:7: note: 'sprintf' output between 36 and 1059 bytes into a destination of size 1024 sprintf(buffer, "Default validity period is set to %s.", tmp); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd_cfg.c:3689:54: warning: '%s' directive writing up to 1023 bytes into a region of size 994 [-Wformat-overflow=] sprintf(buffer, "Using international prefixes: %s", tmp); ^~ ~~~ smsd_cfg.c:3689:7: note: 'sprintf' output between 31 and 1054 bytes into a destination of size 1024 sprintf(buffer, "Using international prefixes: %s", tmp); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd_cfg.c:3706:49: warning: '%s' directive writing up to 1023 bytes into a region of size 999 [-Wformat-overflow=] sprintf(buffer, "Using national prefixes: %s", tmp); ^~ ~~~ smsd_cfg.c:3706:7: note: 'sprintf' output between 26 and 1049 bytes into a destination of size 1024 sprintf(buffer, "Using national prefixes: %s", tmp); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc `mm-config --cflags` -pipe -DUSE_ICONV -DLIBICONV_PLUG -O2 -isystem /usr/local/include -fno-strict-aliasing -DNUMBER_OF_MODEMS=64 -W -Wall -D_FILE_OFFSET_BITS=64 -o smsd smsd.c extras.o locking.o cfgfile.o logging.o alarm.o smsd_cfg.o charset.o stats.o blacklist.o whitelist.o modeminit.o pdu.o charshift.o `mm-config --ldflags --libs` -linotify -L/usr/lib -L/usr/local/lib smsd.c: In function 'receivesms': smsd.c:3831:11: warning: 'strncpy' output truncated before terminating nul copying 3 bytes from a string of the same length [-Wstringop-truncation] strncpy(p, "\",\"", 3); ^~~~~~~~~~~~~~~~~~~~~~ smsd.c: In function 'extract_macros.part.3': smsd.c:819:13: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] strncpy(p, p_value, len_value); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd.c:800:21: note: length computed here len_value = strlen(p_value); ^~~~~~~~~~~~~~~ smsd.c: In function 'change_headers': smsd.c:977:28: warning: '/smsd.XXXXXX' directive writing 12 bytes into a region of size between 8 and 1031 [-Wformat-overflow=] sprintf(tmp_filename, "%s/smsd.XXXXXX", tmpdir); ^~~~~~~~~~~~ smsd.c:977:3: note: 'sprintf' output between 13 and 1036 bytes into a destination of size 1031 sprintf(tmp_filename, "%s/smsd.XXXXXX", tmpdir); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from smsd.c:40: smsd.c: In function 'received2file': smsd_cfg.h:35:32: warning: '-concatenated' directive writing 13 bytes into a region of size between 0 and 1023 [-Wformat-overflow=] #define CONCATENATED_DIR_FNAME "%s/%s-concatenated" ^~~~~~~~~~~~~~~~~~~~ smsd.c:3282:29: note: in expansion of macro 'CONCATENATED_DIR_FNAME' sprintf(con_filename, CONCATENATED_DIR_FNAME, (*d_saved)? d_saved : d_incoming, DEVICE.name); ^~~~~~~~~~~~~~~~~~~~~~ smsd.c:3282:7: note: 'sprintf' output 15 or more bytes (assuming 1038) into a destination of size 1024 sprintf(con_filename, CONCATENATED_DIR_FNAME, (*d_saved)? d_saved : d_incoming, DEVICE.name); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd.c:3436:38: warning: '.XXXXXX' directive writing 7 bytes into a region of size between 0 and 1023 [-Wformat-overflow=] sprintf(tmp_filename,"%s/%s.XXXXXX",d_incoming,DEVICE.name); ^~~~~~~ smsd.c:3436:11: note: 'sprintf' output 9 or more bytes (assuming 1032) into a destination of size 1024 sprintf(tmp_filename,"%s/%s.XXXXXX",d_incoming,DEVICE.name); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd.c: In function 'send_part': smsd.c:4139:27: warning: 'sprintf' may write a terminating nul past the end of the destination [-Wformat-overflow=] sprintf(command2,"%s\x1A",pdu); ^ smsd.c:4139:3: note: 'sprintf' output between 2 and 1025 bytes into a destination of size 1024 sprintf(command2,"%s\x1A",pdu); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd.c: In function 'exec_system': smsd.c:305:50: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size 247 [-Wformat-truncation=] snprintf(msg, sizeof(msg), "Smsd3: %s, %s", DEVICE.name, alert); ^~ ~~~~~ smsd.c:305:11: note: 'snprintf' output 10 or more bytes (assuming 265) into a destination of size 256 snprintf(msg, sizeof(msg), "Smsd3: %s, %s", DEVICE.name, alert); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd.c:332:82: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 205 and 236 [-Wformat-truncation=] snprintf(shared_buffer, SIZE_SHARED_BUFFER, "%s Sms3: mainprocess, %s", adminmessage_device, alert); ^~ ~~~~~ smsd.c:332:15: note: 'snprintf' output between 21 and 307 bytes into a destination of size 256 snprintf(shared_buffer, SIZE_SHARED_BUFFER, "%s Sms3: mainprocess, %s", adminmessage_device, alert); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd.c: In function 'savephonecall': smsd.c:2833:27: warning: '.XXXXXX' directive writing 7 bytes into a region of size between 0 and 1023 [-Wformat-overflow=] sprintf(filename, "%s/%s.XXXXXX", (*d_phonecalls)? d_phonecalls : d_incoming, DEVICE.name); ^~~~~~~ smsd.c:2833:3: note: 'sprintf' output 9 or more bytes (assuming 1032) into a destination of size 1024 sprintf(filename, "%s/%s.XXXXXX", (*d_phonecalls)? d_phonecalls : d_incoming, DEVICE.name); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd.c:2831:27: warning: '.' directive writing 1 byte into a region of size between 0 and 1023 [-Wformat-overflow=] sprintf(filename, "%s/%s.%s.XXXXXX", (*d_phonecalls)? d_phonecalls : d_incoming, DEVICE.name, timestamp); ^ smsd.c:2831:3: note: 'sprintf' output 10 or more bytes (assuming 1113) into a destination of size 1024 sprintf(filename, "%s/%s.%s.XXXXXX", (*d_phonecalls)? d_phonecalls : d_incoming, DEVICE.name, timestamp); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd.c:2829:25: warning: '%s' directive writing up to 80 bytes into a region of size between 0 and 1023 [-Wformat-overflow=] sprintf(filename, "%s/%s.%s.XXXXXX", (*d_phonecalls)? d_phonecalls : d_incoming, timestamp, DEVICE.name); ^~ ~~~~~~~~~ smsd.c:2829:3: note: 'sprintf' output 10 or more bytes (assuming 1113) into a destination of size 1024 sprintf(filename, "%s/%s.%s.XXXXXX", (*d_phonecalls)? d_phonecalls : d_incoming, timestamp, DEVICE.name); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd.c: In function 'cmd_to_modem.part.7': smsd.c:6022:34: warning: '/smsd.XXXXXX' directive writing 12 bytes into a region of size between 1 and 1024 [-Wformat-overflow=] sprintf(tmp_filename, "%s/smsd.XXXXXX", tmpdir); ^~~~~~~~~~~~ smsd.c:6022:9: note: 'sprintf' output between 13 and 1036 bytes into a destination of size 1024 sprintf(tmp_filename, "%s/smsd.XXXXXX", tmpdir); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd.c:6068:67: warning: '%s' directive output may be truncated writing up to 1023 bytes into a region of size between 931 and 1011 [-Wformat-truncation=] snprintf(buffer, sizeof(buffer), "%s,%i, %s: CMD: %s: %s\n", timestamp, DEVICE.dev_rr_loglevel, DEVICE.name, command, answer); ^~ ~~~~~~ smsd.c:6068:13: note: 'snprintf' output 15 or more bytes (assuming 1118) into a destination of size 1024 snprintf(buffer, sizeof(buffer), "%s,%i, %s: CMD: %s: %s\n", timestamp, DEVICE.dev_rr_loglevel, DEVICE.name, command, answer); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from smsd.c:40: smsd.c: In function 'do_ic_purge': smsd_cfg.h:35:32: warning: '-concatenated' directive writing 13 bytes into a region of size between 0 and 1023 [-Wformat-overflow=] #define CONCATENATED_DIR_FNAME "%s/%s-concatenated" ^~~~~~~~~~~~~~~~~~~~ smsd.c:6241:25: note: in expansion of macro 'CONCATENATED_DIR_FNAME' sprintf(con_filename, CONCATENATED_DIR_FNAME, (*d_saved)? d_saved : d_incoming, DEVICE.name); ^~~~~~~~~~~~~~~~~~~~~~ smsd.c:6241:3: note: 'sprintf' output 15 or more bytes (assuming 1038) into a destination of size 1024 sprintf(con_filename, CONCATENATED_DIR_FNAME, (*d_saved)? d_saved : d_incoming, DEVICE.name); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd.c: In function 'send1sms': smsd.c:5040:49: warning: '%s' directive output may be truncated writing up to 39015 bytes into a region of size 1024 [-Wformat-truncation=] snprintf(part_text, sizeof(part_text), "%s", text); ^~ ~~~~ smsd.c:5040:9: note: 'snprintf' output between 1 and 39016 bytes into a destination of size 1024 snprintf(part_text, sizeof(part_text), "%s", text); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smsd.c:4857:11: warning: 'eachpartlen' may be used uninitialized in this function [-Wmaybe-uninitialized] writelogfile(LOG_DEBUG, 0, "Splitting this message into %i parts of max %i characters%s.", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ parts, (alphabet == ALPHABET_UCS2)? eachpartlen /2 : eachpartlen, (alphabet == ALPHABET_UCS2)? " (unicode)" : ""); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gmake[2]: Leaving directory '/construction/comms/smstools3/smstools3/src' gmake[1]: Leaving directory '/construction/comms/smstools3/smstools3' SUCCEEDED 00:00:10 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for smstools-3.1.21 ===> Generating temporary packing list gmake[1]: Entering directory '/construction/comms/smstools3/smstools3' ./install.sh /construction/comms/smstools3/stage/usr/local/bin Installing binary program files /construction/comms/smstools3/stage/usr/local/bin/smsd Example script files are not installed automatically. Please dont forget to edit /construction/comms/smstools3/stage/usr/local/etc/smsd.conf. gmake[1]: Leaving directory '/construction/comms/smstools3/smstools3' /bin/mkdir -p /construction/comms/smstools3/stage/usr/local/share/smstools for file in `/usr/bin/find /construction/comms/smstools3/smstools3/scripts -type f ! -name 'README' ! -name '*.bak'`; do install -m 555 $file /construction/comms/smstools3/stage/usr/local/share/smstools/; done ln -sf /usr/local/share/smstools/sendsms /construction/comms/smstools3/stage/usr/local/bin/sendsms ln -sf /usr/local/share/smstools/sms2html /construction/comms/smstools3/stage/usr/local/bin/sms2html ln -sf /usr/local/share/smstools/sms2unicode /construction/comms/smstools3/stage/usr/local/bin/sms2unicode ln -sf /usr/local/share/smstools/unicode2sms /construction/comms/smstools3/stage/usr/local/bin/unicode2sms install -m 0644 /construction/comms/smstools3/smstools3/examples/smsd.conf.easy /construction/comms/smstools3/stage/usr/local/etc/smsd.conf.sample /bin/mkdir -p /construction/comms/smstools3/stage/usr/local/share/doc/smstools/slideshow install -m 0644 /construction/comms/smstools3/smstools3/doc/*.html /construction/comms/smstools3/stage/usr/local/share/doc/smstools/ install -m 0644 /construction/comms/smstools3/smstools3/doc/slideshow/* /construction/comms/smstools3/stage/usr/local/share/doc/smstools/slideshow /bin/mkdir -p /construction/comms/smstools3/stage/usr/local/share/examples/smstools for file in `/usr/bin/find /construction/comms/smstools3/smstools3/examples -type f ! -name 'README'`; do install -m 555 $file /construction/comms/smstools3/stage/usr/local/share/examples/smstools/; done /bin/mkdir -p /construction/comms/smstools3/stage/var/spool/sms/incoming /construction/comms/smstools3/stage/var/spool/sms/outgoing /construction/comms/smstools3/stage/var/spool/sms/checked /construction/comms/smstools3/stage/var/log/smsd /construction/comms/smstools3/stage/var/run/smsd ====> Compressing man pages (compress-man) ===> Staging rc.d startup script(s) ====> Running Q/A tests (stage-qa) Warning: Bad symlink '/usr/local/bin/sendsms' pointing to an absolute pathname '/usr/local/share/smstools/sendsms' Warning: Bad symlink '/usr/local/bin/unicode2sms' pointing to an absolute pathname '/usr/local/share/smstools/unicode2sms' Warning: Bad symlink '/usr/local/bin/sms2html' pointing to an absolute pathname '/usr/local/share/smstools/sms2html' Warning: Bad symlink '/usr/local/bin/sms2unicode' pointing to an absolute pathname '/usr/local/share/smstools/sms2unicode' Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks Warning: Possible REINPLACE_CMD issues sed failed: file content unchanged from backup: src/Makefile sed failed: file content unchanged from backup: scripts/README sed failed: file content unchanged from backup: scripts/callhandler sed failed: file content unchanged from backup: scripts/checkhandler-utf-8 sed failed: file content unchanged from backup: scripts/email2sms sed failed: file content unchanged from backup: scripts/eventhandler-utf-8 sed failed: file content unchanged from backup: scripts/forwardsms sed failed: file content unchanged from backup: scripts/hex2bin sed failed: file content unchanged from backup: scripts/hex2dec sed failed: file content unchanged from backup: scripts/mysmsd sed failed: file content unchanged from backup: scripts/pkill sed failed: file content unchanged from backup: scripts/sms2xml sed failed: file content unchanged from backup: scripts/sms3 sed failed: file content unchanged from backup: scripts/smsevent sed failed: file content unchanged from backup: scripts/smsresend sed failed: file content unchanged from backup: scripts/smstest.php sed failed: file content unchanged from backup: scripts/sql_demo SUCCEEDED 00:00:02 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for smstools-3.1.21 file sizes/checksums [87]: 0% file sizes/checksums [87]: 100% packing files [87]: 0% packing files [87]: 100% packing directories [6]: 0% packing directories [6]: 100% SUCCEEDED 00:00:01 TOTAL TIME 00:00:15