------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- UNFLAVORED devel/binutils -> use devel/binutils@native Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gmp-6.2.0.txz Installing /packages/All/mpfr-4.0.2.txz Installing /packages/All/gettext-runtime-0.20.2.txz Installing /packages/All/gmake-4.3_2.txz Installing /packages/All/ncurses-6.1.20190525.txz Installing /packages/All/libtextstyle-0.20.2.txz Installing /packages/All/gettext-tools-0.20.2.txz Installing /packages/All/binutils-2.33.1_2,1.txz Installing /packages/All/fpc-3.0.4_3.txz ===== Message from fpc-3.0.4_3: -- 1) Add lib paths to /usr/local/etc/fpc.cfg # searchpath for libraries -Fl/usr/local/lib This is necessary for correct linking of libraries. 2) You can install additional units from: * lang/fpc-units 3) If you want to see all documentation about FreePascal, you can install * lang/fpc-docs 4) Optionally, you can install textmode IDE with Delphi support * editors/fpc-ide 5) This port add support to fp compiler to get value from FPC_LDPATH environment variable. By default fp compiler use /usr/local/bin/ld.bfd for linking binaries. If you want change this, just must be define FPC_LDPATH with path to ld tool that will be used by fp compiler. Take on mind that fpc only works with binutils on this moment but could work with another ld tool later on next versions of freepascal 6) Enjoy it ;) Installing /packages/All/freetype2-2.10.2.txz ===== Message from freetype2-2.10.2: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). Installing /packages/All/png-1.6.37.txz Installing /packages/All/expat-2.2.8.txz Installing /packages/All/fontconfig-2.13.92_2,1.txz Running fc-cache to build fontconfig cache... Font directories: /usr/local/share/fonts /usr/local/lib/X11/fonts /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded Installing /packages/All/pcre-8.44.txz Installing /packages/All/libffi-3.2.1_3.txz Installing /packages/All/libxml2-2.9.10.txz Installing /packages/All/libiconv-1.16.txz Installing /packages/All/readline-8.0.4.txz Installing /packages/All/openssl-1.1.1g,1.txz Installing /packages/All/python37-3.7.7_1.txz ===== Message from python37-3.7.7_1: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py37-gdbm databases/py-gdbm@py37 py37-sqlite3 databases/py-sqlite3@py37 py37-tkinter x11-toolkits/py-tkinter@py37 Installing /packages/All/glib-2.56.3_7,1.txz No schema files found: doing nothing. Installing /packages/All/wayland-1.18.0.txz Installing /packages/All/pciids-20200529.txz Installing /packages/All/libpciaccess-0.16.txz Installing /packages/All/libdrm-2.4.101.txz Installing /packages/All/libunwind-20200331.txz Installing /packages/All/libelf-0.8.13_3.txz Installing /packages/All/libXau-1.0.9.txz Installing /packages/All/libpthread-stubs-0.4.txz Installing /packages/All/xorgproto-2020.1.txz Installing /packages/All/libXdmcp-1.1.3.txz Installing /packages/All/libxcb-1.13.1.txz Installing /packages/All/libX11-1.6.9_1,1.txz Installing /packages/All/libXfixes-5.0.3_2.txz Installing /packages/All/libXdamage-1.1.5.txz Installing /packages/All/libXext-1.3.4,1.txz Installing /packages/All/libxshmfence-1.3.txz Installing /packages/All/libXxf86vm-1.1.4_3.txz Installing /packages/All/libXrender-0.9.10_2.txz Installing /packages/All/libXrandr-1.5.2.txz Installing /packages/All/mesa-libs-19.0.8_1.txz Installing /packages/All/pixman-0.40.0.txz Installing /packages/All/cairo-1.16.0,2.txz Installing /packages/All/fpc-cairo-3.0.4_3.txz Installing /packages/All/fpc-chm-3.0.4_3.txz Installing /packages/All/fpc-fcl-base-3.0.4_3.txz Installing /packages/All/fpc-fcl-image-3.0.4_3.txz Installing /packages/All/fpc-fcl-json-3.0.4_5.txz Installing /packages/All/fpc-fcl-stl-3.0.4_5.txz Installing /packages/All/fpc-fcl-res-3.0.4_3.txz Installing /packages/All/fpc-rtl-objpas-3.0.4_5.txz Installing /packages/All/fpc-iconvenc-3.0.4_3.txz Installing /packages/All/fpc-fcl-xml-3.0.4_3.txz Installing /packages/All/libGLU-9.0.1.txz Installing /packages/All/libICE-1.0.10,1.txz Installing /packages/All/libXi-1.7.10,1.txz Installing /packages/All/freeglut-3.0.0_2.txz ===== Message from freeglut-3.0.0_2: -- Joystick support is untested and it is unknown if it works. Do not hesitate to contact x11@FreeBSD.org if this causes issues. Installing /packages/All/fpc-opengl-3.0.4_3.txz Installing /packages/All/fpc-pasjpeg-3.0.4_3.txz Installing /packages/All/fpc-rtl-extra-3.0.4_3.txz Installing /packages/All/libXcursor-1.2.0.txz Installing /packages/All/libfontenc-1.1.4.txz Installing /packages/All/libXfont-1.5.4_2,2.txz Installing /packages/All/libXxf86dga-1.1.5.txz Installing /packages/All/libXinerama-1.1.4_2,1.txz Installing /packages/All/libxkbfile-1.1.0.txz Installing /packages/All/libXres-1.2.0_2.txz Installing /packages/All/libXv-1.0.11_2,1.txz Installing /packages/All/fpc-x11-3.0.4_6.txz UNFLAVORED devel/binutils -> use devel/binutils@native Installing /packages/All/fpc-utils-3.0.4_6.txz Installing /packages/All/atk-2.36.0.txz Installing /packages/All/libdaemon-0.14_1.txz Installing /packages/All/libSM-1.2.3,1.txz Installing /packages/All/dbus-1.12.16.txz ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. Installing /packages/All/dbus-glib-0.110.txz Installing /packages/All/gdbm-1.18.1_1.txz Installing /packages/All/gobject-introspection-1.56.1,1.txz Installing /packages/All/gnome_subr-1.0.txz Installing /packages/All/avahi-app-0.7_3.txz ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. Installing /packages/All/nettle-3.6.txz Installing /packages/All/libtasn1-4.16.0.txz Installing /packages/All/libunistring-0.9.10_1.txz Installing /packages/All/libidn2-2.3.0_1.txz Installing /packages/All/ca_root_nss-3.53.txz ===== Message from ca_root_nss-3.53: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/p11-kit-0.23.20.txz Installing /packages/All/tpm-emulator-0.7.4_2.txz ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. Installing /packages/All/trousers-0.3.14_2.txz ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. ===== Message from trousers-0.3.14_2: -- To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Installing /packages/All/gnutls-3.6.14.txz Installing /packages/All/libpaper-1.1.24.4.txz Installing /packages/All/cups-2.2.13.txz ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. Installing /packages/All/jbigkit-2.1_1.txz Installing /packages/All/jpeg-turbo-2.0.4.txz Installing /packages/All/tiff-4.1.0.txz Installing /packages/All/shared-mime-info-1.10_2.txz Installing /packages/All/gdk-pixbuf2-2.40.0.txz Installing /packages/All/graphite2-1.3.14.txz Installing /packages/All/harfbuzz-2.6.7.txz Installing /packages/All/fribidi-0.19.7.txz Installing /packages/All/mkfontscale-1.2.1.txz Installing /packages/All/font-bh-ttf-1.0.3_4.txz Installing /packages/All/font-misc-meltho-1.0.3_4.txz Installing /packages/All/font-misc-ethiopic-1.0.3_4.txz Installing /packages/All/encodings-1.0.5,1.txz Installing /packages/All/dejavu-2.37_1.txz ===== Message from dejavu-2.37_1: -- Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Installing /packages/All/xorg-fonts-truetype-7.7_1.txz Installing /packages/All/libXft-2.3.3.txz Installing /packages/All/pango-1.42.4_3.txz Installing /packages/All/hicolor-icon-theme-0.17.txz Installing /packages/All/libXcomposite-0.4.5,1.txz Installing /packages/All/gtk-update-icon-cache-2.24.32.txz Installing /packages/All/gtk2-2.24.32.txz Installing /packages/All/fpc-gtk2-3.0.4_3.txz UNFLAVORED devel/binutils -> use devel/binutils@native Installing /packages/All/fpc-source-3.0.4_2.txz UNFLAVORED devel/gdb -> use devel/gdb@py37 Installing /packages/All/icu-67.1,1.txz Installing /packages/All/boost-libs-1.72.0_2.txz ===== Message from boost-libs-1.72.0_2: -- You have built the Boost library with thread support. Don't forget to add -pthread to your linker options when linking your code. Installing /packages/All/source-highlight-3.1.9_1.txz Installing /packages/All/gdb-9.2_1.txz Installing /packages/All/desktop-file-utils-0.24.txz Installing /packages/All/lazarus-gtk2-2.0.8.txz ===== Message from lazarus-gtk2-2.0.8: -- The Lazarus RAD was installed 1) You can run it using: # lazarus 2) The first time that lazarus is running, you should set the path to fpc source directory at lazarus configuration environment. Also it could be setting later. 3) Now you can obtain freepascal source installing lang/fpc-source port or package It will be extracted to /usr/local/share/fpc-source-X.X.X 4) You can use /usr/local/bin/gdb debugger instead of gdb installed debugger installed from base system. Lazarus works better with this version. 5) The lazbuild.cfg file has been removed, it is not necessary anymore. Now we can use the following ports for aplications that depend of lazarus and these can be built with an interface different than lazarus has compiled by default: editors/lazarus editors/lazarus-qt5 You can added those ports if you want support for gtk2, or qt5 interfaces. Please look at net-p2p/transmission-remote-gui like a example of how use it 6) Enjoy it ;) UNFLAVORED devel/binutils -> use devel/binutils@native UNFLAVORED devel/binutils -> use devel/binutils@native UNFLAVORED devel/binutils -> use devel/binutils@native UNFLAVORED devel/gdb -> use devel/gdb@py37 SUCCEEDED 00:01:44 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by zcad-gtk2-0.9.8.4_5 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by zcad-gtk2-0.9.8.4_5 for building => SHA256 Checksum OK for zamtmn-zcad-0.9.8.4_GH0.tar.gz. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by zcad-gtk2-0.9.8.4_5 for building ===> Extracting for zcad-gtk2-0.9.8.4_5 => SHA256 Checksum OK for zamtmn-zcad-0.9.8.4_GH0.tar.gz. Extracted Memory Use: 72.85M SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for zcad-gtk2-0.9.8.4_5 ===> Applying ports patches for zcad-gtk2-0.9.8.4_5 from /xports/cad/zcad/files SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/bin/as - found ===> zcad-gtk2-0.9.8.4_5 depends on executable: ppcx64 - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/cairo.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/chm.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/fcl-base.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/fcl-image.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/fcl-json.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/fcl-stl.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/fcl-xml.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/opengl.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/pasjpeg.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/rtl-extra.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/rtl-objpas.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/x11.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/bin/as - found ===> zcad-gtk2-0.9.8.4_5 depends on executable: fpcres - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/gtk2.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly/gtk2/interfaces.ppu - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- ===> zcad-gtk2-0.9.8.4_5 depends on shared library: libglib-2.0.so - found (/usr/local/lib/libglib-2.0.so) ===> zcad-gtk2-0.9.8.4_5 depends on shared library: libgtk-x11-2.0.so - found (/usr/local/lib/libgtk-x11-2.0.so) ===> zcad-gtk2-0.9.8.4_5 depends on shared library: libatk-1.0.so - found (/usr/local/lib/libatk-1.0.so) ===> zcad-gtk2-0.9.8.4_5 depends on shared library: libpango-1.0.so - found (/usr/local/lib/libpango-1.0.so) ===> zcad-gtk2-0.9.8.4_5 depends on shared library: libgdk_pixbuf-2.0.so - found (/usr/local/lib/libgdk_pixbuf-2.0.so) SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/bin/as - found ===> zcad-gtk2-0.9.8.4_5 depends on executable: ppcx64 - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/cairo.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/chm.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/fcl-base.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/fcl-image.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/fcl-json.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/fcl-stl.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/fcl-xml.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/opengl.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/pasjpeg.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/rtl-extra.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/rtl-objpas.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/x11.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/bin/as - found ===> zcad-gtk2-0.9.8.4_5 depends on executable: fpcres - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/lib/fpc/3.0.4/fpmkinst/x86_64-dragonfly/gtk2.fpm - found ===> zcad-gtk2-0.9.8.4_5 depends on file: /usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly/gtk2/interfaces.ppu - found ===> zcad-gtk2-0.9.8.4_5 depends on shared library: libglib-2.0.so - found (/usr/local/lib/libglib-2.0.so) ===> zcad-gtk2-0.9.8.4_5 depends on shared library: libgtk-x11-2.0.so - found (/usr/local/lib/libgtk-x11-2.0.so) ===> zcad-gtk2-0.9.8.4_5 depends on shared library: libatk-1.0.so - found (/usr/local/lib/libatk-1.0.so) ===> zcad-gtk2-0.9.8.4_5 depends on shared library: libpango-1.0.so - found (/usr/local/lib/libpango-1.0.so) ===> zcad-gtk2-0.9.8.4_5 depends on shared library: libgdk_pixbuf-2.0.so - found (/usr/local/lib/libgdk_pixbuf-2.0.so) ===> Configuring for zcad-gtk2-0.9.8.4_5 /usr/bin/sed -e 's,Linux,DragonFly,' /usr/local/share/lazarus-2.0.8/components/opengl/openglcontext.pas > /construction/cad/zcad/zcad-0.9.8.4/cad_source/openglcontext.pas /bin/cp /usr/local/share/lazarus-2.0.8/components/opengl/glgtkglxcontext.pas /usr/local/share/lazarus-2.0.8/components/opengl/glqtcontext.pas /usr/local/share/lazarus-2.0.8/components/opengl/openglcontext.res /construction/cad/zcad/zcad-0.9.8.4/cad_source /bin/cp -a /usr/local/share/lazarus-2.0.8/components/fpvectorial /usr/local/share/lazarus-2.0.8/components/anchordocking /usr/local/share/lazarus-2.0.8/components/virtualtreeview /usr/local/share/lazarus-2.0.8/components/lclextensions /construction/cad/zcad/zcad-0.9.8.4/cad_source SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for zcad-gtk2-0.9.8.4_5 SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" SetupCompilerFilename: Searching compiler ... SearchCompilerCandidates Value=fpc File=/usr/local/bin/fpc Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" SetupCompilerFilename: using /usr/local/bin/fpc Hint: (lazarus) storing Lazarus directory "/usr/local/share/lazarus-2.0.8/" Compiler path "/usr/local/bin/fpc" in "/construction/cad/zcad/zcad-0.9.8.4/tmppcp/environmentoptions.xml" Hint: (lazarus) Missing state file of AnchorDocking 1.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/lib/x86_64-dragonfly/AnchorDocking.compiled Info: (lazarus) Execute Title="Compile package AnchorDocking 1.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[10]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly/gtk2" Info: (lazarus) Param[13]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/" Info: (lazarus) Param[14]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/lib/x86_64-dragonfly/" Info: (lazarus) Param[15]="-dLCL" Info: (lazarus) Param[16]="-dLCLgtk2" Info: (lazarus) Param[17]="anchordockpkg.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling anchordockpkg.pas (3104) Compiling anchordocking.pas (3104) Compiling anchordockstr.pas (1010) Writing Resource String Table file: anchordockstr.rsj (3104) Compiling anchordockstorage.pas (3104) Compiling anchordockpanel.pas (3104) Compiling anchordocking.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(586,22) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(587,34) Hint: (5024) Parameter "Data" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(547,37) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(568,38) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(569,28) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(153,30) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(138,32) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(140,33) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(141,32) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(123,43) Hint: (5024) Parameter "WithThemeSpace" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(178,30) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(187,43) Hint: (5024) Parameter "Data" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(228,30) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(229,32) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(230,35) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(231,39) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(232,36) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordocking.pas(233,40) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordockpanel.pas(16,29) Hint: (5024) Parameter "Source" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordockpanel.pas(16,51) Hint: (5024) Parameter "X" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordockpanel.pas(16,59) Hint: (5024) Parameter "Y" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordockpanel.pas(16,76) Hint: (5024) Parameter "State" not used (3104) Compiling anchordockoptionsdlg.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordockoptionsdlg.pas(51,45) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordockoptionsdlg.pas(52,44) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordockoptionsdlg.pas(53,40) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordockoptionsdlg.pas(54,43) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordockoptionsdlg.pas(49,23) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordockoptionsdlg.pas(48,26) Hint: (5024) Parameter "State" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordockoptionsdlg.pas(46,26) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordockoptionsdlg.pas(50,43) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordockpkg.pas(11,37) Hint: (5023) Unit "AnchorDockStr" not used in anchordockpkg /construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/anchordockpkg.pas(11,52) Hint: (5023) Unit "AnchorDockOptionsDlg" not used in anchordockpkg (1008) 9783 lines compiled, 2.9 sec (1022) 34 hint(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of fpvectorialpkg 0.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/lib/x86_64-dragonfly/fpvectorialpkg.compiled Info: (lazarus) Execute Title="Compile package fpvectorialpkg 0.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[10]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly/gtk2" Info: (lazarus) Param[13]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/" Info: (lazarus) Param[14]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/lib/x86_64-dragonfly/" Info: (lazarus) Param[15]="-dLCL" Info: (lazarus) Param[16]="-dLCLgtk2" Info: (lazarus) Param[17]="fpvectorialpkg.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling fpvectorialpkg.pas (3104) Compiling fpvectorial.pas (3104) Compiling fpvutils.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(185,13) Warning: (5036) Local variable "f2" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(60,106) Hint: (5024) Parameter "ATangentAngle" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(421,6) Note: (5025) Local variable "lCurStep" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(509,8) Note: (5025) Local variable "x2p" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(509,18) Note: (5025) Local variable "y2p" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(586,3) Note: (5025) Local variable "P" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(607,6) Note: (5025) Local variable "j" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(611,3) Note: (5025) Local variable "coordX2" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(611,12) Note: (5025) Local variable "coordY2" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(611,21) Note: (5025) Local variable "coordX3" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(611,30) Note: (5025) Local variable "coordY3" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(611,39) Note: (5025) Local variable "coordX4" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(611,48) Note: (5025) Local variable "coordY4" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(613,3) Note: (5025) Local variable "pts" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(614,3) Note: (5025) Local variable "pts3D" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(618,3) Hint: (5028) Local absolutevar "cur2DBSegment" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(619,3) Hint: (5028) Local absolutevar "cur2DArcSegment" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(757,3) Hint: (5028) Local const "EPS" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(762,3) Note: (5025) Local variable "xval" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(762,9) Note: (5025) Local variable "yval" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(89,55) Hint: (5024) Parameter "AB" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(89,59) Hint: (5024) Parameter "AC" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(1060,25) Hint: (5057) Local variable "FirstChar" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvutils.pas(1068,46) Hint: (5057) Local variable "Buf" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(246,30) Hint: (5024) Parameter "AEntity" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(249,33) Hint: (5024) Parameter "AFont" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(249,48) Hint: (5024) Parameter "ASetElements" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1368,45) Hint: (5024) Parameter "ARenderInfo" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1296,45) Hint: (5024) Parameter "ARenderInfo" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(2794,3) Hint: (5028) Local absolutevar "ADest" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(2873,3) Note: (5025) Local variable "P1" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(2873,7) Note: (5025) Local variable "P2" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(2873,11) Note: (5025) Local variable "P3" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(2873,15) Note: (5025) Local variable "P4" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(2875,3) Note: (5025) Local variable "startanglePi2" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(2875,18) Note: (5025) Local variable "endanglePi2" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(2877,3) Note: (5025) Local variable "nextx" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(2877,10) Note: (5025) Local variable "nexty" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(3097,11) Note: (5025) Local variable "t3" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(3098,11) Note: (5025) Local variable "x3" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(3099,11) Note: (5025) Local variable "y3" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(3257,3) Note: (5027) Local variable "lPosX" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(328,44) Hint: (5024) Parameter "ADistance" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(331,20) Hint: (5024) Parameter "ADeltaX" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(331,29) Hint: (5024) Parameter "ADeltaY" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(332,22) Hint: (5024) Parameter "AAngle" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(332,38) Hint: (5024) Parameter "ABase" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(335,27) Hint: (5024) Parameter "ADestX" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(335,35) Hint: (5024) Parameter "ADestY" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(335,52) Hint: (5024) Parameter "AMulX" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(335,59) Hint: (5024) Parameter "AMulY" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(335,78) Hint: (5024) Parameter "Points" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(494,24) Hint: (5024) Parameter "APage" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(496,23) Hint: (5024) Parameter "APage" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(499,45) Hint: (5024) Parameter "ARenderInfo" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(3684,27) Hint: (5092) Variable "ATo" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(515,40) Hint: (5024) Parameter "ACoord" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(516,7) Hint: (5024) Parameter "ACoordIsX" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(517,26) Hint: (5024) Parameter "APos" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(517,44) Hint: (5024) Parameter "ASubpart" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(517,64) Hint: (5024) Parameter "ASnapFlexibility" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(519,27) Hint: (5024) Parameter "ADeltaX" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(519,36) Hint: (5024) Parameter "ADeltaY" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(519,53) Hint: (5024) Parameter "ASubpart" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(521,41) Hint: (5024) Parameter "ARenderInfo" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(521,68) Hint: (5024) Parameter "ABaseX" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(521,76) Hint: (5024) Parameter "ABaseY" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(522,21) Hint: (5024) Parameter "ADeltaScaleX" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(522,35) Hint: (5024) Parameter "ADeltaScaleY" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(523,22) Hint: (5024) Parameter "AAngle" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(523,38) Hint: (5024) Parameter "ABase" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(525,53) Hint: (5024) Parameter "ADoDraw" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(528,41) Hint: (5024) Parameter "ARenderInfo" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4268,37) Note: (5027) Local variable "lGradient_r_px" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4268,53) Note: (5027) Local variable "lGradient_fx_px" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4268,70) Note: (5027) Local variable "lGradient_fy_px" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4388,37) Warning: (5043) Symbol "Handle" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4389,24) Warning: (5043) Symbol "Handle" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4391,24) Warning: (5043) Symbol "Handle" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4416,88) Hint: (5091) Local variable "polystarts" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4416,76) Hint: (5091) Local variable "polypoints" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4399,3) Hint: (5028) Local absolutevar "ADest" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4410,3) Note: (5025) Local variable "j" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4543,88) Hint: (5091) Local variable "polystarts" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4543,76) Hint: (5091) Local variable "polypoints" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4591,3) Hint: (5028) Local absolutevar "ADestX" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4592,3) Hint: (5028) Local absolutevar "ADestY" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4594,3) Hint: (5028) Local absolutevar "AMulY" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4843,3) Note: (5027) Local variable "L" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4944,16) Warning: (4044) Comparison might be always false due to range of constant and expression /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(4958,16) Warning: (4044) Comparison might be always false due to range of constant and expression /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(5509,3) Hint: (5028) Local absolutevar "Cur2DBSegment" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(5510,3) Hint: (5028) Local absolutevar "Cur2DArcSegment" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(688,44) Hint: (5024) Parameter "ASubpart" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(5665,35) Hint: (5091) Local variable "lRenderInfo" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(5711,42) Note: (5025) Local variable "lFontDescenderPx" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(5874,26) Note: (5025) Local variable "lTextHeight" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(735,45) Hint: (5024) Parameter "ARenderInfo" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(5961,3) Hint: (5028) Local absolutevar "ADest" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(768,26) Hint: (5024) Parameter "APos" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(768,44) Hint: (5024) Parameter "ASubpart" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(768,64) Hint: (5024) Parameter "ASnapFlexibility" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(769,45) Hint: (5024) Parameter "ARenderInfo" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(6187,3) Hint: (5028) Local absolutevar "ADest" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(790,45) Hint: (5024) Parameter "ARenderInfo" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(6610,3) Hint: (5028) Local absolutevar "ALCLDest" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(6762,3) Hint: (5028) Local absolutevar "ALCLDest" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(879,45) Hint: (5024) Parameter "ARenderInfo" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(920,45) Hint: (5024) Parameter "ARenderInfo" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(920,76) Hint: (5024) Parameter "ALeft" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(920,83) Hint: (5024) Parameter "ATop" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(920,89) Hint: (5024) Parameter "ARight" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(920,97) Hint: (5024) Parameter "ABottom" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(974,68) Hint: (5024) Parameter "ABaseX" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(974,76) Hint: (5024) Parameter "ABaseY" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(986,42) Hint: (5024) Parameter "arg" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1035,42) Hint: (5024) Parameter "arg" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(8390,3) Hint: (5028) Local absolutevar "lText" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(8392,3) Hint: (5028) Local absolutevar "ACanvas" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(8444,41) Hint: (5091) Local variable "lEntityRenderInfo" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1158,54) Hint: (5024) Parameter "ARenderInfo" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1159,7) Hint: (5024) Parameter "ALevel" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1160,49) Hint: (5024) Parameter "ADoDraw" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(8684,42) Hint: (5091) Local variable "lEntityRenderInfo" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(8660,3) Hint: (5028) Local absolutevar "lPara" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(8661,3) Hint: (5028) Local absolutevar "lList" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(8766,3) Note: (5027) Local variable "lCurHeight" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1197,79) Hint: (5024) Parameter "AWidth" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(8862,23) Hint: (5092) Variable "ARenderInfo" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1483,22) Hint: (5024) Parameter "ASource" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(9001,41) Hint: (5057) Local variable "lNaturalHeightDiff" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1528,41) Hint: (5024) Parameter "arg" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(9162,48) Hint: (5057) Local variable "lSubpart" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1574,46) Hint: (5024) Parameter "AZ" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1575,32) Hint: (5024) Parameter "AZ" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(9887,29) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1619,35) Hint: (5024) Parameter "Pos" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(9893,29) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1620,41) Hint: (5024) Parameter "AName" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1620,56) Hint: (5024) Parameter "AType" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1620,91) Hint: (5024) Parameter "ARecursively" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1624,28) Hint: (5024) Parameter "AEntity" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1624,47) Hint: (5024) Parameter "AFreeAfterRemove" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1634,30) Hint: (5024) Parameter "ADest" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1635,32) Hint: (5024) Parameter "ADest" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1636,7) Hint: (5024) Parameter "ADestX" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1636,28) Hint: (5024) Parameter "ADestY" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1636,49) Hint: (5024) Parameter "AMulX" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1636,70) Hint: (5024) Parameter "AMulY" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(9971,3) Note: (5025) Local variable "lBoundsLeft" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(9971,16) Note: (5025) Local variable "lBoundsTop" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(9971,28) Note: (5025) Local variable "lBoundsRight" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(9971,42) Note: (5025) Local variable "lBoundsBottom" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1414,22) Hint: (5024) Parameter "ASource" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(10302,31) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(10326,48) Hint: (5091) Local variable "lRenderInfo" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(10746,34) Hint: (5057) Local variable "lTmpInt" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1662,27) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1662,47) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1679,30) Hint: (5024) Parameter "AStrings" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1679,50) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1523,5) Note: (5029) Private field "TvVectorialPage.FTmpText" is never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial.pas(1724,3) Hint: (5028) Local const "Str_Error_Nil_Path" is not used (3104) Compiling fpvtocanvas.pas (3104) Compiling fpvectbuildunit.pas (3104) Compiling avisocncgcodereader.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/avisocncgcodereader.pas(52,3) Hint: (5028) Local const "STR_GCODE_STEPPER_MOVE" is not used (3104) Compiling avisocncgcodewriter.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/avisocncgcodewriter.pas(76,25) Warning: (4040) Class types "T2DSegment" and "T3DSegment" are not related /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/avisocncgcodewriter.pas(90,31) Warning: (4040) Class types "T2DSegment" and "T3DBezierSegment" are not related /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/avisocncgcodewriter.pas(39,3) Note: (5025) Local variable "Str" not used (3104) Compiling avisozlib.pas (3104) Compiling svgvectorialwriter.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(227,5) Note: (5025) Local variable "gradient" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(39,52) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(43,53) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(287,58) Hint: (5057) Local variable "h" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(287,55) Hint: (5057) Local variable "w" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(297,76) Hint: (5057) Local variable "cy" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(297,72) Hint: (5057) Local variable "cx" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(298,54) Hint: (5057) Local variable "dtmp" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(298,48) Hint: (5057) Local variable "cr" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(47,47) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(314,78) Hint: (5057) Local variable "cy" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(314,74) Hint: (5057) Local variable "cx" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(315,79) Hint: (5057) Local variable "ry" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(315,75) Hint: (5057) Local variable "rx" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(49,48) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(453,86) Hint: (5057) Local variable "PtY" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(453,81) Hint: (5057) Local variable "PtX" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(469,70) Hint: (5057) Local variable "BezierCP1Y" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(469,58) Hint: (5057) Local variable "BezierCP1X" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(471,70) Hint: (5057) Local variable "BezierCP2Y" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(471,58) Hint: (5057) Local variable "BezierCP2X" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(490,73) Hint: (5057) Local variable "ry" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(490,69) Hint: (5057) Local variable "rx" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(491,94) Hint: (5057) Local variable "cy" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(491,90) Hint: (5057) Local variable "cx" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(59,45) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(546,102) Hint: (5057) Local variable "ptY" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(546,97) Hint: (5057) Local variable "ptX" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(61,47) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(571,82) Hint: (5057) Local variable "cy" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(571,78) Hint: (5057) Local variable "cx" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(572,61) Hint: (5057) Local variable "h" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(572,58) Hint: (5057) Local variable "w" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(573,63) Hint: (5057) Local variable "ry" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(573,59) Hint: (5057) Local variable "rx" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(63,50) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(598,74) Hint: (5057) Local variable "PtY" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(598,69) Hint: (5057) Local variable "PtX" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(65,45) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialwriter.pas(90,3) Hint: (5028) Local const "FLOAT_MILLIMETERS_PER_PIXEL" is not used (3104) Compiling cdrvectorialreader.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/cdrvectorialreader.pas(78,25) Hint: (5057) Local variable "lVerBytes" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/cdrvectorialreader.pas(67,3) Note: (5027) Local variable "lDWord" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/cdrvectorialreader.pas(54,30) Hint: (5024) Parameter "AStream" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/cdrvectorialreader.pas(54,48) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/cdrvectorialreader.pas(160,21) Hint: (5057) Local variable "lRIFF" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/cdrvectorialreader.pas(153,3) Note: (5027) Local variable "lDocSize" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/cdrvectorialreader.pas(153,13) Note: (5027) Local variable "lDWord" is assigned but never used (3104) Compiling epsvectorialreader.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(67,33) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(48,44) Hint: (5024) Parameter "AKeepTokenType" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(617,44) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(650,46) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(719,46) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(764,66) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(881,3) Note: (5027) Local variable "HasNextChar" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(196,74) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(196,98) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(1458,6) Warning: (2005) Comment level 2 found /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(1458,22) Warning: (2005) Comment level 2 found /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(1460,36) Warning: (2005) Comment level 2 found /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(1532,12) Warning: (2005) Comment level 2 found /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(1533,10) Warning: (2005) Comment level 2 found /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(1534,12) Warning: (2005) Comment level 2 found /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(1685,3) Note: (5027) Local variable "Param1" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(1685,11) Note: (5025) Local variable "Param2" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(1803,44) Hint: (5091) Local variable "lImageData" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(1755,11) Note: (5025) Local variable "Param2" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(1761,3) Note: (5027) Local variable "lImageType" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(1761,42) Note: (5027) Local variable "lImageBitsPerComponent" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(199,36) Hint: (5024) Parameter "AToken" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(199,86) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2031,3) Note: (5025) Local variable "Param1" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2031,11) Note: (5025) Local variable "Param2" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(200,77) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(200,101) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2061,50) Warning: (2005) Comment level 2 found /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(201,36) Hint: (5024) Parameter "AToken" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(201,62) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(201,86) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(202,63) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(202,87) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(203,35) Hint: (5024) Parameter "AToken" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(203,61) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(203,85) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(204,39) Hint: (5024) Parameter "AToken" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(204,65) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(204,89) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2256,11) Note: (5025) Local variable "Param2" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(205,70) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(205,94) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(206,36) Hint: (5024) Parameter "AToken" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(206,62) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(206,86) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(190,74) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(190,98) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2539,67) Hint: (5057) Local variable "PosY" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2539,61) Hint: (5057) Local variable "PosX" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2540,76) Hint: (5057) Local variable "PosY2" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2540,69) Hint: (5057) Local variable "PosX2" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2569,44) Hint: (5057) Local variable "BaseY" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2569,37) Hint: (5057) Local variable "BaseX" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2590,76) Hint: (5057) Local variable "PosY3" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2590,69) Hint: (5057) Local variable "PosX3" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2663,99) Hint: (5057) Local variable "P4" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2663,95) Hint: (5057) Local variable "P3" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2663,91) Hint: (5057) Local variable "P2" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(2663,87) Hint: (5057) Local variable "P1" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(191,97) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(192,96) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(193,72) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(193,96) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(194,68) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(194,92) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(195,71) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(195,95) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/epsvectorialreader.pas(3343,20) Note: (5025) Local variable "NewToken" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectbuildunit.pas(5,44) Hint: (5023) Unit "avisozlib" not used in fpvectbuildunit /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectbuildunit.pas(6,4) Hint: (5023) Unit "fpvtocanvas" not used in fpvectbuildunit (3104) Compiling dxfvectorialreader.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(109,33) Hint: (5024) Parameter "ATokens" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(109,54) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(109,78) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(961,3) Note: (5027) Local variable "lEntity" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(111,80) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(111,107) Hint: (5024) Parameter "AOnlyCreate" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(1051,27) Note: (5027) Local variable "LineStartZ" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(1052,23) Note: (5027) Local variable "LineEndZ" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(112,78) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(1132,21) Note: (5027) Local variable "CenterZ" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(113,77) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(1196,33) Note: (5027) Local variable "CircleCenterZ" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(114,80) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(115,83) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(1576,21) Note: (5027) Local variable "CenterZ" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(1576,60) Note: (5027) Local variable "MajorAxisEndZ" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(116,81) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(117,80) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(1726,3) Note: (5027) Local variable "PosZ" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(118,78) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(119,84) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(120,80) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(121,35) Hint: (5024) Parameter "ATokens" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(121,56) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(121,80) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(122,37) Hint: (5024) Parameter "ATokens" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(122,58) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(122,82) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(123,56) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(123,80) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(124,35) Hint: (5024) Parameter "ATokens" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(124,80) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(2000,3) Note: (5027) Local variable "PosZ" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(125,79) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(126,80) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(2106,33) Note: (5027) Local variable "CircleCenterZ" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(127,79) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(129,34) Hint: (5024) Parameter "AStr" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(148,3) Hint: (5028) Local const "DXF_AUTOCAD_2010" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(149,3) Hint: (5028) Local const "DXF_AUTOCAD_2007" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(150,3) Hint: (5028) Local const "DXF_AUTOCAD_2004" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(151,3) Hint: (5028) Local const "DXF_AUTOCAD_2000" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(154,3) Hint: (5028) Local const "DXF_AUTOCAD_R14" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(155,3) Hint: (5028) Local const "DXF_AUTOCAD_R13" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(156,3) Hint: (5028) Local const "DXF_AUTOCAD_R11_and_R12" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(157,3) Hint: (5028) Local const "DXF_AUTOCAD_R10" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(158,3) Hint: (5028) Local const "DXF_AUTOCAD_R9" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(161,3) Hint: (5028) Local const "DXF_ENTITIES_TYPE" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(162,3) Hint: (5028) Local const "DXF_ENTITIES_HANDLE" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(163,3) Hint: (5028) Local const "DXF_ENTITIES_LINETYPE_NAME" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(164,3) Hint: (5028) Local const "DXF_ENTITIES_APPLICATION_GROUP" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(165,3) Hint: (5028) Local const "DXF_ENTITIES_AcDbEntity" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(166,3) Hint: (5028) Local const "DXF_ENTITIES_MODEL_OR_PAPER_SPACE" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/dxfvectorialreader.pas(167,3) Hint: (5028) Local const "DXF_ENTITIES_VISIBILITY" is not used (3104) Compiling lasvectorialreader.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/lasvectorialreader.pas(243,22) Hint: (5057) Local variable "lRecord1" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/lasvectorialreader.pas(180,3) Note: (5025) Local variable "lRecord0" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/lasvectorialreader.pas(139,28) Hint: (5024) Parameter "AStream" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/lasvectorialreader.pas(359,31) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/lasvectorialreader.pas(421,34) Hint: (5057) Local variable "lRecord0" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/lasvectorialreader.pas(427,34) Hint: (5057) Local variable "lRecord1" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/lasvectorialreader.pas(158,5) Note: (5029) Private field "TvLASVectorialWriter.InitialPos" is never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/lasvectorialreader.pas(158,17) Note: (5029) Private field "TvLASVectorialWriter.PositionAfterPublicHeader" is never used (3104) Compiling lazvectorialreader.pas (3104) Compiling mathmlvectorialreader.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/mathmlvectorialreader.pas(67,3) Note: (5025) Local variable "lSubNodeNameStr" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/mathmlvectorialreader.pas(68,3) Note: (5027) Local variable "lNodeTextLen" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/mathmlvectorialreader.pas(25,22) Note: (5029) Private field "TvMathMLVectorialReader.FCommaSeparator" is never used (3104) Compiling odgvectorialreader.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(453,3) Note: (5025) Local variable "ListOfCommandLetters" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(458,3) Note: (5025) Local variable "lFirstTmpStrChar" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(142,32) Hint: (5024) Parameter "arg" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(668,84) Hint: (5091) Local variable "DummyBrush" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(767,34) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(793,63) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(793,51) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(149,51) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(149,75) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(827,23) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(828,24) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(848,26) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(858,30) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(859,31) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(910,23) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(911,24) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1066,10) Warning: (4105) Implicit string type conversion with potential data loss from "UnicodeString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1118,23) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1119,24) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1125,59) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1144,26) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1152,31) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(155,76) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1209,69) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1211,69) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1213,70) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1215,70) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1217,66) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1219,70) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1223,82) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1223,46) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(156,72) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1281,23) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1282,24) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1309,26) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1251,19) Note: (5027) Local variable "lWidth" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1251,27) Note: (5027) Local variable "lHeight" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1253,26) Note: (5025) Local variable "lSubNodeName" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1253,40) Note: (5025) Local variable "lSubNodeValue" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1254,13) Note: (5025) Local variable "lCurSubNode" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1255,3) Note: (5027) Local variable "lSkewX" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1255,11) Note: (5027) Local variable "lSkewY" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1255,19) Note: (5027) Local variable "lRotate" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1255,28) Note: (5027) Local variable "lTranslateX" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1255,41) Note: (5027) Local variable "lTranslateY" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1354,45) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1356,45) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1358,45) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1360,45) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1362,42) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1364,46) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1368,58) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1368,46) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(158,69) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1411,73) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1413,74) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1415,59) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1417,57) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1419,66) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1421,70) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1425,82) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1425,46) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(159,69) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1450,26) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1451,27) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1441,14) Note: (5027) Local variable "lNodeValue" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1494,26) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1495,27) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1500,29) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1486,3) Note: (5027) Local variable "lNodeName" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(161,70) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1526,18) Warning: (4105) Implicit string type conversion with potential data loss from "UnicodeString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1527,24) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(163,53) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(163,77) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1559,18) Warning: (4105) Implicit string type conversion with potential data loss from "UnicodeString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1560,24) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1573,20) Warning: (4105) Implicit string type conversion with potential data loss from "UnicodeString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1574,46) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(164,53) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(164,77) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(166,31) Hint: (5024) Parameter "AInputStr" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(166,50) Hint: (5024) Parameter "ADest" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1598,3) Note: (5025) Local variable "MA" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1598,7) Note: (5025) Local variable "MB" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1598,11) Note: (5025) Local variable "MC" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1598,15) Note: (5025) Local variable "MD" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1598,19) Note: (5025) Local variable "ME" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1598,23) Note: (5025) Local variable "MF" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1599,3) Note: (5025) Local variable "lMTranslateX" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1599,17) Note: (5025) Local variable "lMTranslateY" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1599,31) Note: (5025) Local variable "lMScaleX" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1599,41) Note: (5025) Local variable "lMScaleY" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1599,51) Note: (5025) Local variable "lMSkewX" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1599,60) Note: (5025) Local variable "lMSkewY" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1599,69) Note: (5025) Local variable "lMRotate" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(1603,3) Note: (5025) Local variable "lMatrixElements" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(2049,42) Warning: (4104) Implicit string type conversion from "AnsiString" to "UnicodeString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(2051,20) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(175,13) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(2182,3) Note: (5025) Local variable "Doc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(2183,3) Note: (5025) Local variable "lCurNode" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(2184,3) Note: (5025) Local variable "lPage" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(190,30) Hint: (5024) Parameter "AStream" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(190,48) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(2275,20) Warning: (4105) Implicit string type conversion with potential data loss from "UnicodeString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(2276,29) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(2312,20) Warning: (4105) Implicit string type conversion with potential data loss from "UnicodeString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(2314,69) Warning: (5036) Local variable "CurPage" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(2329,20) Warning: (4105) Implicit string type conversion with potential data loss from "UnicodeString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(856,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(856,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(871,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(871,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(922,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(922,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(927,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(927,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(889,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(889,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(894,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(894,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(876,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(876,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(881,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(881,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(914,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(914,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(132,22) Note: (5029) Private field "TvODGVectorialReader.FCommaSeparator" is never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(200,3) Hint: (5028) Local const "XML_HEADER" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(203,3) Hint: (5028) Local const "OPENDOC_PATH_CONTENT" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(204,3) Hint: (5028) Local const "OPENDOC_PATH_META" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(205,3) Hint: (5028) Local const "OPENDOC_PATH_SETTINGS" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(206,3) Hint: (5028) Local const "OPENDOC_PATH_STYLES" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(207,3) Hint: (5028) Local const "OPENDOC_PATH_MIMETYPE" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(208,3) Hint: (5028) Local const "OPENDOC_PATH_METAINF" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(209,3) Hint: (5028) Local const "OPENDOC_PATH_METAINF_MANIFEST" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(212,3) Hint: (5028) Local const "SCHEMAS_XMLNS_OFFICE" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(213,3) Hint: (5028) Local const "SCHEMAS_XMLNS_DCTERMS" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(214,3) Hint: (5028) Local const "SCHEMAS_XMLNS_META" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(215,3) Hint: (5028) Local const "SCHEMAS_XMLNS" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(216,3) Hint: (5028) Local const "SCHEMAS_XMLNS_CONFIG" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(217,3) Hint: (5028) Local const "SCHEMAS_XMLNS_OOO" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(218,3) Hint: (5028) Local const "SCHEMAS_XMLNS_MANIFEST" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(219,3) Hint: (5028) Local const "SCHEMAS_XMLNS_FO" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(220,3) Hint: (5028) Local const "SCHEMAS_XMLNS_STYLE" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(221,3) Hint: (5028) Local const "SCHEMAS_XMLNS_SVG" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(222,3) Hint: (5028) Local const "SCHEMAS_XMLNS_TABLE" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(223,3) Hint: (5028) Local const "SCHEMAS_XMLNS_TEXT" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(224,3) Hint: (5028) Local const "SCHEMAS_XMLNS_V" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(225,3) Hint: (5028) Local const "SCHEMAS_XMLNS_NUMBER" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(226,3) Hint: (5028) Local const "SCHEMAS_XMLNS_CHART" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(227,3) Hint: (5028) Local const "SCHEMAS_XMLNS_DR3D" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(228,3) Hint: (5028) Local const "SCHEMAS_XMLNS_MATH" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(229,3) Hint: (5028) Local const "SCHEMAS_XMLNS_FORM" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(230,3) Hint: (5028) Local const "SCHEMAS_XMLNS_SCRIPT" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(231,3) Hint: (5028) Local const "SCHEMAS_XMLNS_OOOW" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(232,3) Hint: (5028) Local const "SCHEMAS_XMLNS_OOOC" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(233,3) Hint: (5028) Local const "SCHEMAS_XMLNS_DOM" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(234,3) Hint: (5028) Local const "SCHEMAS_XMLNS_XFORMS" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(235,3) Hint: (5028) Local const "SCHEMAS_XMLNS_XSD" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(236,3) Hint: (5028) Local const "SCHEMAS_XMLNS_XSI" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odgvectorialreader.pas(247,3) Hint: (5028) Local const "FLOAT_PIXELS_PER_MILIMETER" is not used (3104) Compiling rawvectorialreadwrite.pas (3104) Compiling svgvectorialreader_rsvg.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader_rsvg.pas(91,49) Hint: (5057) Local variable "Buffer" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader_rsvg.pas(20,22) Hint: (5023) Unit "math" not used in svgvectorialreader_rsvg /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader_rsvg.pas(20,28) Hint: (5023) Unit "contnrs" not used in svgvectorialreader_rsvg (3104) Compiling svgzvectorialreader.pas (3104) Compiling svgvectorialreader.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(276,10) Warning: (2005) Comment level 2 found /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(277,9) Warning: (2005) Comment level 2 found /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(278,10) Warning: (2005) Comment level 2 found /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(279,9) Warning: (2005) Comment level 2 found /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(280,9) Warning: (2005) Comment level 2 found /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(281,9) Warning: (2005) Comment level 2 found /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(408,3) Note: (5025) Local variable "lFirstTmpStrChar" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(473,3) Note: (5025) Local variable "ListOfCommandLetters" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(478,3) Note: (5025) Local variable "lFirstTmpStrChar" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(558,3) Note: (5025) Local variable "i" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(187,29) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(1423,3) Note: (5025) Local variable "lBrushEntity" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(1423,17) Note: (5025) Local variable "lCurBrush" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(1548,12) Warning: (5089) Local variable "lCurName" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(1556,43) Warning: (5089) Local variable "lCurData" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(1575,26) Note: (5025) Local variable "lNodeName" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(1575,37) Note: (5027) Local variable "lEntityValue" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(1577,6) Note: (5025) Local variable "len" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(1783,61) Hint: (5057) Local variable "tmp" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(199,74) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(200,75) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(1890,3) Note: (5027) Local variable "lTextStr" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(1894,40) Note: (5025) Local variable "lSubNodeValue" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(202,77) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2046,3) Note: (5025) Local variable "lImageData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(203,73) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2144,13) Note: (5025) Local variable "lLayerNameNode" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2145,3) Note: (5027) Local variable "lLayer" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2250,32) Hint: (5057) Local variable "vy1" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2250,27) Hint: (5057) Local variable "vx1" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2252,32) Hint: (5057) Local variable "vy2" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2252,27) Hint: (5057) Local variable "vx2" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2228,3) Note: (5025) Local variable "lStyleStr" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(205,72) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2294,23) Warning: (4104) Implicit string type conversion from "AnsiString" to "WideString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2296,21) Warning: (4104) Implicit string type conversion from "AnsiString" to "WideString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2319,25) Warning: (4104) Implicit string type conversion from "AnsiString" to "WideString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2327,45) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2329,49) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2331,51) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2333,60) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2356,25) Warning: (4104) Implicit string type conversion from "AnsiString" to "WideString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2411,28) Note: (5025) Local variable "LeftmostEllipse" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(2411,45) Note: (5025) Local variable "ClockwiseArc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(209,74) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(211,72) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(213,72) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(214,71) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(3328,3) Note: (5027) Local variable "ViewPortApplied" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(227,13) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(231,13) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(856,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(856,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(871,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(871,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(922,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(922,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(927,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(927,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(889,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(889,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(894,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(894,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(876,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(876,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(881,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(881,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(914,1) Hint: (3123) "inherited" not yet supported inside inline procedure/function /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fgl.pp(914,1) Hint: (3124) Inlining disabled /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(258,3) Hint: (5028) Local const "FLOAT_PIXELS_PER_MILIMETER" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/svgvectorialreader.pas(261,3) Hint: (5028) Local const "FLOAT_PIXEL_PER_POINT" is not used (3104) Compiling odtvectorialwriter.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odtvectorialwriter.pas(125,46) Hint: (5024) Parameter "AParagraph" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odtvectorialwriter.pas(126,7) Hint: (5024) Parameter "ACurPage" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odtvectorialwriter.pas(127,44) Hint: (5024) Parameter "AParagraph" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odtvectorialwriter.pas(131,55) Hint: (5024) Parameter "AParagraph" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odtvectorialwriter.pas(132,7) Hint: (5024) Parameter "ACurPage" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odtvectorialwriter.pas(132,37) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odtvectorialwriter.pas(1730,31) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odtvectorialwriter.pas(160,3) Hint: (5028) Local const "OPENDOC_PATH_METAINF" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odtvectorialwriter.pas(171,3) Hint: (5028) Local const "SCHEMAS_XMLNS_DCTERMS" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odtvectorialwriter.pas(198,3) Hint: (5028) Local const "SCHEMAS_XMLNS_V" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odtvectorialwriter.pas(202,3) Hint: (5028) Local const "SCHEMAS_XMLNS_XSD" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odtvectorialwriter.pas(213,3) Hint: (5028) Local const "FLOAT_MILIMETERS_PER_PIXEL" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/odtvectorialwriter.pas(214,3) Hint: (5028) Local const "FLOAT_PIXELS_PER_MILIMETER" is not used (3104) Compiling docxvectorialwriter.pas (3104) Compiling htmlvectorialreader.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(47,15) Warning: (3057) An inherited method is hidden by "ReadFromXML(TXMLDocument;TvVectorialDocument);" /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(157,3) Note: (5025) Local variable "lx" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(157,7) Note: (5025) Local variable "ly" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(157,11) Note: (5025) Local variable "lw" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(157,15) Note: (5025) Local variable "lh" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(160,3) Note: (5025) Local variable "lImageData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(35,74) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(312,3) Note: (5025) Local variable "lText" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(36,74) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(332,3) Note: (5025) Local variable "lText" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(37,91) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(352,3) Note: (5025) Local variable "lText" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(38,75) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(373,14) Note: (5027) Local variable "lNodeValue" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(468,14) Note: (5027) Local variable "lNodeValue" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(506,14) Note: (5027) Local variable "lNodeValue" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(510,3) Note: (5027) Local variable "lCurPara" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(41,76) Hint: (5024) Parameter "ADoc" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(551,3) Note: (5027) Local variable "lTmp" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(581,14) Note: (5025) Local variable "lNodeValue" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(582,3) Note: (5025) Local variable "ANode" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(583,3) Note: (5025) Local variable "i" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(29,22) Note: (5029) Private field "TvHTMLVectorialReader.FCommaSeparator" is never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(63,3) Hint: (5028) Local const "FLOAT_PIXELS_PER_MILIMETER" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(16,22) Hint: (5023) Unit "math" not used in htmlvectorialreader /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(16,28) Hint: (5023) Unit "contnrs" not used in htmlvectorialreader /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/htmlvectorialreader.pas(17,46) Hint: (5023) Unit "fgl" not used in htmlvectorialreader (3104) Compiling fpvwmf.pas (3104) Compiling wmfvectorialreader.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialreader.pas(280,3) Note: (5027) Local variable "rasterImg" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialreader.pas(282,3) Note: (5027) Local variable "style" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialreader.pas(283,3) Note: (5027) Local variable "colorUsage" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialreader.pas(73,39) Hint: (5024) Parameter "AParams" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialreader.pas(75,33) Hint: (5024) Parameter "AParams" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialreader.pas(80,26) Hint: (5024) Parameter "APage" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialreader.pas(525,3) Note: (5027) Local variable "R" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialreader.pas(622,25) Hint: (5057) Local variable "buf" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialreader.pas(756,3) Note: (5025) Local variable "pts" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialreader.pas(810,30) Hint: (5057) Local variable "wmfRec" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialreader.pas(1035,3) Note: (5027) Local variable "bmpCoreHdr" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialreader.pas(1097,3) Note: (5025) Local variable "hasCoreHdr" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialreader.pas(97,30) Hint: (5024) Parameter "AStream" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialreader.pas(1213,3) Note: (5025) Local variable "txtHeight" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialreader.pas(157,17) Hint: (5028) Local type "TWMFPalette" is not used (3104) Compiling wmfvectorialwriter.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialwriter.pas(523,3) Note: (5025) Local variable "i" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialwriter.pas(524,3) Note: (5025) Local variable "P" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialwriter.pas(525,3) Note: (5025) Local variable "offs" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialwriter.pas(566,3) Note: (5025) Local variable "i" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialwriter.pas(110,43) Hint: (5024) Parameter "AData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialwriter.pas(679,88) Hint: (5091) Local variable "polystarts" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialwriter.pas(679,76) Hint: (5091) Local variable "points" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialwriter.pas(857,3) Note: (5025) Local variable "n" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialwriter.pas(860,3) Note: (5025) Local variable "offs" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialwriter.pas(861,3) Note: (5025) Local variable "P" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialwriter.pas(67,5) Note: (5029) Private field "TvWMFVectorialWriter.FCurrPolyFillMode" is never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialwriter.pas(134,3) Hint: (5028) Local const "DEFAULT_SIZE" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialwriter.pas(150,17) Hint: (5028) Local type "TWMFPalette" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/wmfvectorialwriter.pas(154,16) Hint: (5028) Local type "TWMFRegion" is not used (3104) Compiling fpvectorial2canvas.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial2canvas.pas(48,31) Hint: (5024) Parameter "ARenderInfo" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial2canvas.pas(48,58) Hint: (5024) Parameter "ADoDraw" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial2canvas.pas(49,29) Hint: (5024) Parameter "ARenderInfo" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial2canvas.pas(49,56) Hint: (5024) Parameter "ADoDraw" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial2canvas.pas(31,37) Hint: (5023) Unit "contnrs" not used in fpvectorial2canvas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial2canvas.pas(37,12) Hint: (5023) Unit "LazRegions" not used in fpvectorial2canvas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorial2canvas.pas(38,56) Hint: (5023) Unit "InterfaceBase" not used in fpvectorial2canvas /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorialpkg.pas(11,16) Hint: (5023) Unit "fpvtocanvas" not used in fpvectorialpkg /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorialpkg.pas(11,29) Hint: (5023) Unit "fpvectbuildunit" not used in fpvectorialpkg /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorialpkg.pas(11,56) Hint: (5023) Unit "avisozlib" not used in fpvectorialpkg /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorialpkg.pas(14,3) Hint: (5023) Unit "lazvectorialreader" not used in fpvectorialpkg /construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/fpvectorialpkg.pas(17,44) Hint: (5023) Unit "fpvWMF" not used in fpvectorialpkg (1008) 33780 lines compiled, 8.1 sec (1021) 98 warning(s) issued (1022) 417 hint(s) issued (1023) 154 note(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Compiler unit paths changed for lclextensions_package 0.6.1 Old="/construction/cad/zcad/zcad-0.9.8.4/packager/units/x86_64-dragonfly;/construction/cad/zcad/zcad-0.9.8.4/cad_source/lazutils/lib/x86_64-dragonfly;/construction/cad/zcad/zcad-0.9.8.4/lcl/units/x86_64-dragonfly;/construction/cad/zcad/zcad-0.9.8.4/lcl/units/x86_64-dragonfly/gtk2;/construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions" Now="/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly;/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly;/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly;/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly/gtk2;/construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions" State file="/construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/lib/x86_64-dragonfly-gtk2/lclextensions_package.compiled" Info: (lazarus) Execute Title="Compile package lclextensions_package 0.6.1" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scgi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/include/gtk2" Info: (lazarus) Param[10]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[13]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly/gtk2" Info: (lazarus) Param[14]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/" Info: (lazarus) Param[15]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/lib/x86_64-dragonfly-gtk2/" Info: (lazarus) Param[16]="-dLCL" Info: (lazarus) Param[17]="-dLCLgtk2" Info: (lazarus) Param[18]="lclextensions_package.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling lclextensions_package.pas (3104) Compiling delphicompat.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(77,35) Hint: (5024) Parameter "nNumWindows" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(81,25) Hint: (5024) Parameter "hImage" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(81,47) Hint: (5024) Parameter "uType" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(81,68) Hint: (5024) Parameter "cxDesired" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(81,84) Hint: (5024) Parameter "cyDesired" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(81,109) Hint: (5024) Parameter "fuFlags" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(83,30) Hint: (5024) Parameter "hWinPosInfo" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(83,48) Hint: (5024) Parameter "hWnd" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(83,59) Hint: (5024) Parameter "hWndInsertAfter" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(83,89) Hint: (5024) Parameter "x" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(83,97) Hint: (5024) Parameter "y" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(83,105) Hint: (5024) Parameter "cx" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(83,114) Hint: (5024) Parameter "cy" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(83,131) Hint: (5024) Parameter "uFlags" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(86,33) Hint: (5024) Parameter "hWinPosInfo" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(94,23) Hint: (5024) Parameter "hWnd" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(94,42) Hint: (5024) Parameter "hrgnClip" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(94,62) Hint: (5024) Parameter "flags" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(96,33) Hint: (5024) Parameter "dwLayout" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(97,32) Hint: (5024) Parameter "lpKeyState" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(98,29) Hint: (5024) Parameter "Locale" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(98,42) Hint: (5024) Parameter "LCType" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(98,64) Hint: (5024) Parameter "lpLCData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(98,85) Hint: (5024) Parameter "cchData" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(99,28) Hint: (5024) Parameter "DC" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(99,42) Hint: (5024) Parameter "Rgn" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(99,58) Hint: (5024) Parameter "iNum" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(100,28) Hint: (5024) Parameter "hDC" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(108,27) Hint: (5024) Parameter "hWnd" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(110,40) Hint: (5024) Parameter "fShow" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(116,35) Hint: (5024) Parameter "CodePage" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(116,50) Hint: (5024) Parameter "dwFlags" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(116,70) Hint: (5024) Parameter "lpMultiByteStr" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(116,97) Hint: (5024) Parameter "cchMultiByte" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(116,124) Hint: (5024) Parameter "lpWideCharStr" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(116,153) Hint: (5024) Parameter "cchWideChar" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(118,25) Hint: (5024) Parameter "hrgn" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(118,41) Hint: (5024) Parameter "nxOffset" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(118,56) Hint: (5024) Parameter "nYOffset" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(122,24) Hint: (5024) Parameter "DC" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(122,37) Hint: (5024) Parameter "dx" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(122,54) Hint: (5024) Parameter "dy" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(122,75) Hint: (5024) Parameter "lprcScroll" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(122,102) Hint: (5024) Parameter "lprcClip" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(122,122) Hint: (5024) Parameter "hrgnUpdate" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(122,144) Hint: (5024) Parameter "lprcUpdate" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(124,29) Hint: (5024) Parameter "DC" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(124,42) Hint: (5024) Parameter "nXOrg" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(124,54) Hint: (5024) Parameter "nYOrg" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(124,74) Hint: (5024) Parameter "lppt" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(126,32) Hint: (5024) Parameter "lprcDst" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(126,59) Hint: (5024) Parameter "lprcSrc1" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(126,74) Hint: (5024) Parameter "lprcSrc2" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(129,23) Hint: (5024) Parameter "uVirtKey" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(129,38) Hint: (5024) Parameter "uScanCode" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(129,63) Hint: (5024) Parameter "lpKeyState" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(129,87) Hint: (5024) Parameter "lpChar" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(129,107) Hint: (5024) Parameter "uFlags" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(131,28) Hint: (5024) Parameter "Handle" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(120,60) Hint: (5024) Parameter "hrgnUpdate" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/./include/gtk2/../generic/unicodefunctions.inc(55,48) Hint: (5058) Variable "Size" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/./include/gtk2/../generic/unicodefunctions.inc(75,48) Hint: (5058) Variable "Size" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/./include/gtk2/delphicompat.inc(72,32) Hint: (5057) Local variable "TM" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/./include/gtk2/delphicompat.inc(98,34) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/./include/gtk2/delphicompat.inc(99,33) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/./include/gtk2/delphicompat.inc(100,32) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/./include/gtk2/delphicompat.inc(101,31) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(102,15) Hint: (5024) Parameter "MaxWidth" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(102,39) Hint: (5024) Parameter "MaxCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(123,67) Hint: (5024) Parameter "lpRect" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/delphicompat.pas(123,86) Hint: (5024) Parameter "lpClipRect" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/./include/gtk2/delphicompat.inc(225,34) Hint: (5024) Parameter "Widget" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/./include/gtk2/delphicompat.inc(260,44) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/./include/gtk2/delphicompat.inc(261,27) Hint: (4055) Conversion between ordinals and pointers is not portable (3104) Compiling oleutils.pas (3104) Compiling lclext.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/lclext.pas(42,32) Hint: (5024) Parameter "BitmapDC" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/lclext.pas(42,52) Hint: (5024) Parameter "Width" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/lclext.pas(42,64) Hint: (5024) Parameter "Height" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/lclext.pas(42,86) Hint: (5024) Parameter "TransparentColor" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/lclextensions_package.pas(11,17) Hint: (5023) Unit "oleutils" not used in lclextensions_package /construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/lclextensions_package.pas(11,27) Hint: (5023) Unit "LclExt" not used in lclextensions_package (1008) 1116 lines compiled, 2.2 sec (1022) 82 hint(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Compiler unit paths changed for virtualtreeview_package 5.5.3.1 Old="/construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/units/gtk2;/construction/cad/zcad/zcad-0.9.8.4/packager/units/x86_64-dragonfly;/construction/cad/zcad/zcad-0.9.8.4/cad_source/lazutils/lib/x86_64-dragonfly;/construction/cad/zcad/zcad-0.9.8.4/lcl/units/x86_64-dragonfly;/construction/cad/zcad/zcad-0.9.8.4/lcl/units/x86_64-dragonfly/gtk2;/construction/cad/zcad/zcad-0.9.8.4/cad_source/lazcontrols/lib/x86_64-dragonfly/gtk2;/construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/lib/x86_64-dragonfly-gtk2;/construction/cad/zcad/zcad-0.9.8.4/cad_source/ideintf/units/x86_64-dragonfly/gtk2;/construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview" Now="/construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/units/gtk2;/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly;/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly;/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly;/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly/gtk2;/usr/local/share/lazarus-2.0.8/components/lazcontrols/lib/x86_64-dragonfly/gtk2;/construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/lib/x86_64-dragonfly-gtk2;/usr/local/share/lazarus-2.0.8/components/ideintf/units/x86_64-dragonfly/gtk2;/construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview" State file="/construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/lib/x86_64-dragonfly-gtk2/virtualtreeview_package.compiled" Info: (lazarus) Execute Title="Compile package virtualtreeview_package 5.5.3.1" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scgim" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/include/intf/gtk2" Info: (lazarus) Param[10]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/units" Info: (lazarus) Param[11]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/include/intf" Info: (lazarus) Param[12]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/units/gtk2" Info: (lazarus) Param[13]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[14]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[15]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[16]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly/gtk2" Info: (lazarus) Param[17]="-Fu/usr/local/share/lazarus-2.0.8/components/lazcontrols/lib/x86_64-dragonfly/gtk2" Info: (lazarus) Param[18]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/lib/x86_64-dragonfly-gtk2" Info: (lazarus) Param[19]="-Fu/usr/local/share/lazarus-2.0.8/components/ideintf/units/x86_64-dragonfly/gtk2" Info: (lazarus) Param[20]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/" Info: (lazarus) Param[21]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/lib/x86_64-dragonfly-gtk2/" Info: (lazarus) Param[22]="-dLCL" Info: (lazarus) Param[23]="-dLCLgtk2" Info: (lazarus) Param[24]="virtualtreeview_package.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling virtualtreeview_package.pas (3104) Compiling VirtualTrees.pas (3104) Compiling ./units/gtk2/fakeactivex.pas (3104) Compiling ./units/gtk2/virtualpanningwindow.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./units/gtk2/virtualpanningwindow.pas(17,5) Note: (5029) Private field "TVirtualPanningWindow.FOwnerHandle" is never used (3104) Compiling VTGraphics.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/vtgraphicsi.inc(24,3) Note: (5025) Local variable "SrcContext" not used (3104) Compiling ./units/gtk2/fakemmsystem.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummydragmanager.inc(15,3) Note: (5025) Local variable "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummydragmanager.inc(125,3) Note: (5025) Local variable "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummydragmanager.inc(126,3) Note: (5025) Local variable "StgMedium" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummydragmanager.inc(186,3) Note: (5025) Local variable "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummydragmanager.inc(292,3) Note: (5025) Local variable "Len" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummydragmanager.inc(772,3) Note: (5025) Local variable "RButton" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummydragmanager.inc(773,3) Note: (5025) Local variable "LButton" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/VirtualTrees.pas(13641,3) Note: (5025) Local variable "WasValidating" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummyolemethods.inc(9,3) Note: (5025) Local variable "Medium" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummyolemethods.inc(10,3) Note: (5025) Local variable "Data" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummyolemethods.inc(166,3) Note: (5025) Local variable "Medium" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummyolemethods.inc(167,3) Note: (5025) Local variable "Stream" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummyolemethods.inc(168,3) Note: (5025) Local variable "Data" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummyolemethods.inc(169,3) Note: (5025) Local variable "Node" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummyolemethods.inc(170,3) Note: (5025) Local variable "Nodes" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummyolemethods.inc(171,3) Note: (5025) Local variable "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummyolemethods.inc(172,3) Note: (5025) Local variable "Res" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummyolemethods.inc(173,3) Note: (5025) Local variable "ChangeReason" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummyolemethods.inc(358,3) Note: (5025) Local variable "Data" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummyolemethods.inc(359,3) Note: (5025) Local variable "DataSize" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummyolemethods.inc(360,3) Note: (5025) Local variable "S" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummyolemethods.inc(361,3) Note: (5025) Local variable "WS" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/./include/intf/gtk2/../dummyolemethods.inc(362,3) Note: (5025) Local variable "P" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/VirtualTrees.pas(713,5) Note: (5029) Private field "TEnumFormatEtc.FTree" is never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/VirtualTrees.pas(714,5) Note: (5029) Private field "TEnumFormatEtc.FFormatEtcArray" is never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/VirtualTrees.pas(715,5) Note: (5029) Private field "TEnumFormatEtc.FCurrentIndex" is never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/VirtualTrees.pas(778,5) Note: (5029) Private field "TVTDataObject.FAdviseHolder" is never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/VirtualTrees.pas(815,5) Note: (5029) Private field "TVTDragManager.FDragSource" is never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/VirtualTrees.pas(817,5) Note: (5029) Private field "TVTDragManager.FIsDropTarget" is never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/VirtualTrees.pas(818,5) Note: (5029) Private field "TVTDragManager.FDataObject" is never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/VirtualTrees.pas(820,5) Note: (5029) Private field "TVTDragManager.FDropTargetHelper" is never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/VirtualTrees.pas(821,5) Note: (5029) Private field "TVTDragManager.FFullDragging" is never used (1010) Writing Resource String Table file: VirtualTrees.rsj (3104) Compiling VTHeaderPopup.pas (1010) Writing Resource String Table file: VTHeaderPopup.rsj (3104) Compiling registervirtualtreeview.pas (3104) Compiling VTIDEEditors.pas (1008) 38493 lines compiled, 5.9 sec (1023) 34 note(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of rtl_generics 0.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/rtl-generics_for_FPC304/lib/x86_64-dragonfly/rtl_generics.compiled Info: (lazarus) Execute Title="Compile package rtl_generics 0.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/rtl-generics_for_FPC304/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/rtl-generics_for_FPC304/source/inc" Info: (lazarus) Param[10]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/rtl-generics_for_FPC304/source" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/rtl-generics_for_FPC304/" Info: (lazarus) Param[13]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/rtl-generics_for_FPC304/lib/x86_64-dragonfly/" Info: (lazarus) Param[14]="rtl_generics.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling rtl_generics.pas (3104) Compiling ./source/generics.collections.pas (3104) Compiling ./source/generics.memoryexpanders.pas (3104) Compiling ./source/generics.defaults.pas (3104) Compiling ./source/generics.hashes.pas (3104) Compiling ./source/generics.strings.pas (1010) Writing Resource String Table file: generics.strings.rsj (3104) Compiling ./source/generics.helpers.pas (1008) 12813 lines compiled, 19.8 sec SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of zebase 0.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/lib/x86_64-dragonfly/zebase.compiled Info: (lazarus) Execute Title="Compile package zebase 0.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MDelphi" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase" Info: (lazarus) Param[10]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[13]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[14]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/lib/x86_64-dragonfly/" Info: (lazarus) Param[15]="zebase.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling zebase.pas (3104) Compiling uzbtypesbase.pas (3104) Compiling uzbtypes.pas (3104) Compiling uzbgeomtypes.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/uzbtypes.pas(68,35) Hint: (5024) Parameter "PField" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/uzbtypes.pas(68,42) Hint: (5024) Parameter "PTypeDescriptor" not used (3104) Compiling uzbmemman.pas (3104) Compiling uzbstrproc.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/uzbstrproc.pas(407,76) Warning: (4105) Implicit string type conversion with potential data loss from "UnicodeString" to "GDBString" (3104) Compiling uzbpaths.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/uzbpaths.pas(159,26) Hint: (5057) Local variable "sb" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/zebase.pas(10,3) Hint: (5023) Unit "uzbtypesbase" not used in zebase /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/zebase.pas(10,60) Hint: (5023) Unit "uzbgeomtypes" not used in zebase (1008) 2054 lines compiled, 0.5 sec (1021) 1 warning(s) issued (1022) 7 hint(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of zcontainers 0.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/lib/x86_64-dragonfly/zcontainers.compiled Info: (lazarus) Execute Title="Compile package zcontainers 0.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MDelphi" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase" Info: (lazarus) Param[10]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[13]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[14]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/lib/x86_64-dragonfly" Info: (lazarus) Param[15]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/lib/x86_64-dragonfly/" Info: (lazarus) Param[16]="zcontainers.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling zcontainers.pas (3104) Compiling gzctnrvector.pas (3104) Compiling gzctnrvectortypes.pas (3104) Compiling gzctnrvectorsimple.pas (3104) Compiling gzctnrvectordata.pas (3104) Compiling gzctnrvectorobjects.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/gzctnrvectorobjects.pas(22,6) Hint: (5023) Unit "uzbtypesbase" not used in gzctnrvectorobjects (3104) Compiling gzctnrvectorp.pas (3104) Compiling gzctnrvectorpdata.pas (3104) Compiling gzctnrvectorpobjects.pas (3104) Compiling uzctnrvectorgdbstring.pas (3104) Compiling UGDBOpenArrayOfByte.pas (3104) Compiling uzctnrvectorgdbpointer.pas (3104) Compiling UGDBTree.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/UGDBTree.pas(22,24) Hint: (5023) Unit "uzbtypesbase" not used in UGDBTree (3104) Compiling gzctnrtree.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/gzctnrtree.pas(23,23) Hint: (5023) Unit "gzctnrvectorpobjects" not used in gzctnrtree /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/gzctnrtree.pas(23,54) Hint: (5023) Unit "gzctnrvectorsimple" not used in gzctnrtree (3104) Compiling gzctnrstl.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/gzctnrstl.pas(22,22) Hint: (5023) Unit "gutil" not used in gzctnrstl /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/zcontainers.pas(10,3) Hint: (5023) Unit "gzctnrvector" not used in zcontainers /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/zcontainers.pas(10,17) Hint: (5023) Unit "gzctnrvectorsimple" not used in zcontainers /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/zcontainers.pas(10,37) Hint: (5023) Unit "gzctnrvectordata" not used in zcontainers /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/zcontainers.pas(10,55) Hint: (5023) Unit "gzctnrvectorobjects" not used in zcontainers /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/zcontainers.pas(11,3) Hint: (5023) Unit "gzctnrvectorp" not used in zcontainers /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/zcontainers.pas(11,18) Hint: (5023) Unit "gzctnrvectorpdata" not used in zcontainers /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/zcontainers.pas(11,37) Hint: (5023) Unit "gzctnrvectorpobjects" not used in zcontainers /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/zcontainers.pas(12,3) Hint: (5023) Unit "uzctnrvectorgdbstring" not used in zcontainers /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/zcontainers.pas(12,26) Hint: (5023) Unit "uzctnrvectorgdbpointer" not used in zcontainers /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/zcontainers.pas(12,50) Hint: (5023) Unit "UGDBTree" not used in zcontainers /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/zcontainers.pas(13,24) Hint: (5023) Unit "gzctnrtree" not used in zcontainers /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/zcontainers.pas(13,36) Hint: (5023) Unit "gzctnrstl" not used in zcontainers (1008) 3242 lines compiled, 0.7 sec (1022) 19 hint(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of zcontrols 0.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/lib/x86_64-dragonfly/zcontrols.compiled Info: (lazarus) Execute Title="Compile package zcontrols 0.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/src" Info: (lazarus) Param[10]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[13]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[14]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly/gtk2" Info: (lazarus) Param[15]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/lib/x86_64-dragonfly/" Info: (lazarus) Param[16]="-dLCL" Info: (lazarus) Param[17]="-dLCLgtk2" Info: (lazarus) Param[18]="zcontrols.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling zcontrols.pas (3104) Compiling zlistview.pas (3104) Compiling usupportgui.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/usupportgui.pas(105,58) Warning: (5036) Local variable "IsCommandNotEmpty" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/usupportgui.pas(101,4) Note: (5025) Local variable "s" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/usupportgui.pas(35,81) Hint: (5024) Parameter "CMDEdit" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/usupportgui.pas(33,37) Hint: (5024) Parameter "ItemH" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/usupportgui.pas(33,51) Hint: (5024) Parameter "ReadOnlyMode" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/zlistview.pas(62,32) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/zlistview.pas(62,57) Hint: (5024) Parameter "Item" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/zlistview.pas(63,32) Hint: (5024) Parameter "SubItem" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/zlistview.pas(63,50) Hint: (5024) Parameter "State" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/zlistview.pas(61,45) Hint: (5024) Parameter "Shift" not used (1008) 585 lines compiled, 1.0 sec (1021) 1 warning(s) issued (1022) 10 hint(s) issued (1023) 1 note(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of zmath 0.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zmath/lib/x86_64-dragonfly/zmath.compiled Info: (lazarus) Execute Title="Compile package zmath 0.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zmath/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MDelphi" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase" Info: (lazarus) Param[10]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zmath" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[13]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[14]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/lib/x86_64-dragonfly" Info: (lazarus) Param[15]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zmath/lib/x86_64-dragonfly/" Info: (lazarus) Param[16]="zmath.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling zmath.pas (3104) Compiling uzegeometry.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zmath/uzegeometry.pas(1688,3) Note: (5025) Local variable "dx" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zmath/uzegeometry.pas(1688,7) Note: (5025) Local variable "dy" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zmath/uzegeometry.pas(2102,3) Note: (5027) Local variable "len" is assigned but never used (1010) Writing Resource String Table file: uzegeometry.rsj (3104) Compiling uzemathutils.pas (3104) Compiling uzedimensionaltypes.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zmath/uzemathutils.pas(123,4) Note: (5025) Local variable "SUDir" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zmath/uzemathutils.pas(124,4) Note: (5025) Local variable "SUSubDir" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zmath/zmath.pas(10,30) Hint: (5023) Unit "uzedimensionaltypes" not used in zmath (1008) 3144 lines compiled, 0.5 sec (1022) 3 hint(s) issued (1023) 5 note(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of zscriptbase 0.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/lib/x86_64-dragonfly/zscriptbase.compiled Info: (lazarus) Execute Title="Compile package zscriptbase 0.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase" Info: (lazarus) Param[10]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[13]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[14]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/lib/x86_64-dragonfly" Info: (lazarus) Param[15]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/lib/x86_64-dragonfly" Info: (lazarus) Param[16]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zmath/lib/x86_64-dragonfly" Info: (lazarus) Param[17]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/lib/x86_64-dragonfly/" Info: (lazarus) Param[18]="zscriptbase.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling zscriptbase.pas (3104) Compiling varmandef.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/varmandef.pas(186,30) Warning: (3057) An inherited method is hidden by "constructor Create(TComponent;GDBPointer;var UserTypeDescriptor;Boolean);" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/varmandef.pas(431,35) Warning: (5066) Symbol "ReadOnly" is deprecated: "Will be removed in 2.2 - use extended Style values instead." /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/varmandef.pas(192,37) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/varmandef.pas(169,54) Hint: (5024) Parameter "PInstance" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/varmandef.pas(170,59) Hint: (5024) Parameter "PInstance" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/varmandef.pas(160,52) Hint: (5024) Parameter "pinstance" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/varmandef.pas(161,86) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/varmandef.pas(584,20) Warning: (5043) Symbol "DecimalSeparator" is deprecated (3104) Compiling strmy.pas (3104) Compiling uabstractunit.pas (3104) Compiling typedescriptors.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/typedescriptors.pas(107,46) Hint: (5024) Parameter "fn" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/typedescriptors.pas(22,26) Hint: (5023) Unit "uzctnrvectorgdbpointer" not used in typedescriptors /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/typedescriptors.pas(22,89) Hint: (5023) Unit "gzctnrvectordata" not used in typedescriptors /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/typedescriptors.pas(22,106) Hint: (5023) Unit "uzctnrvectorgdbstring" not used in typedescriptors (3104) Compiling uzctypesdecorations.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/zscriptbase.pas(10,21) Hint: (5023) Unit "uabstractunit" not used in zscriptbase /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/zscriptbase.pas(10,53) Hint: (5023) Unit "uzctypesdecorations" not used in zscriptbase (1008) 1590 lines compiled, 1.2 sec (1021) 3 warning(s) issued (1022) 13 hint(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of zscript 0.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/lib/x86_64-dragonfly/zscript.compiled Info: (lazarus) Execute Title="Compile package zscript 0.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase" Info: (lazarus) Param[10]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[13]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[14]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/lib/x86_64-dragonfly" Info: (lazarus) Param[15]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/lib/x86_64-dragonfly" Info: (lazarus) Param[16]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zmath/lib/x86_64-dragonfly" Info: (lazarus) Param[17]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/lib/x86_64-dragonfly" Info: (lazarus) Param[18]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/lib/x86_64-dragonfly/" Info: (lazarus) Param[19]="zscript.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling zscript.pas (3104) Compiling langsystem.pas (3104) Compiling UBaseTypeDescriptor.pas (3104) Compiling USinonimDescriptor.pas (3104) Compiling UUnitManager.pas (3104) Compiling varman.pas (3104) Compiling UEnumDescriptor.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UEnumDescriptor.pas(81,25) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UEnumDescriptor.pas(40,54) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UEnumDescriptor.pas(40,71) Hint: (5024) Parameter "mode" not used (1010) Writing Resource String Table file: UEnumDescriptor.rsj (3104) Compiling UBaseTypeDescriptor.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(286,6) Warning: (5036) Local variable "e" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(287,11) Warning: (5036) Local variable "td" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(323,9) Warning: (5036) Local variable "error" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(324,27) Warning: (5036) Local variable "td" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(581,57) Warning: (4046) Constructing a class "TFundamentalLongIntDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(582,59) Warning: (4046) Constructing a class "TFundamentalLongWordDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(583,59) Warning: (4046) Constructing a class "TFundamentalSmallIntDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(584,51) Warning: (4046) Constructing a class "TFundamentalByteDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(585,59) Warning: (4046) Constructing a class "TFundamentalShortIntDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(586,51) Warning: (4046) Constructing a class "TFundamentalWordDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(587,57) Warning: (4046) Constructing a class "GDBBooleanDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(588,57) Warning: (4046) Constructing a class "PointerDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(589,53) Warning: (4046) Constructing a class "TFundamentalQWordDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(590,50) Warning: (4046) Constructing a class "TFundamentalInt64Descriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(592,55) Warning: (4046) Constructing a class "GDBStringDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(593,63) Warning: (4046) Constructing a class "GDBAnsiStringDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(595,55) Warning: (4046) Constructing a class "GDBDoubleDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(596,55) Warning: (4046) Constructing a class "GDBFloatDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(614,35) Warning: (4046) Constructing a class "TEnumDataDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(44,64) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(80,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(38,64) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(80,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(38,64) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(80,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(38,64) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(80,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(38,64) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(80,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(38,64) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(80,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(38,64) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(80,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(38,64) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(80,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(38,64) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(80,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(38,64) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(80,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(38,64) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(80,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(56,64) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(80,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(62,64) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(80,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(506,53) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(68,64) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(69,42) Hint: (5024) Parameter "data" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(69,49) Hint: (5024) Parameter "Value" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(80,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(80,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UBaseTypeDescriptor.pas(27,36) Hint: (5023) Unit "uzbtypesbase" not used in UBaseTypeDescriptor (1010) Writing Resource String Table file: UBaseTypeDescriptor.rsj (3104) Compiling URecordDescriptor.pas (3104) Compiling UPointerDescriptor.pas (3104) Compiling varman.pas (3104) Compiling URecordDescriptor.pas (3104) Compiling varman.pas (3104) Compiling UObjectDescriptor.pas (3104) Compiling varman.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(154,19) Note: (3020) Class should have one destructor only /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(374,50) Warning: (4046) Constructing a class "RecordDescriptor" with abstract method "SetValueFromString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(166,36) Hint: (5062) Found abstract method: SetValueFromString(;Pointer;AnsiString); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(411,48) Warning: (4046) Constructing a class "GDBPointerDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(411,48) Warning: (4046) Constructing a class "GDBPointerDescriptor" with abstract method "SetValueFromString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(166,36) Hint: (5062) Found abstract method: SetValueFromString(;Pointer;AnsiString); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(404,4) Note: (5025) Local variable "mf" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(405,4) Note: (5025) Local variable "i" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(407,4) Note: (5025) Local variable "fd" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(452,41) Warning: (4046) Constructing a class "EnumDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(509,22) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(514,4) Note: (5025) Local variable "value" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(171,42) Hint: (5024) Parameter "varname" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(1186,28) Warning: (5036) Local variable "pind" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(1388,26) Warning: (4046) Constructing a class "varmanager" with abstract method "createvariablebytype" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(266,28) Hint: (5062) Found abstract method: createvariablebytype(;AnsiString;AnsiString); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(1388,26) Warning: (4046) Constructing a class "varmanager" with abstract method "createbasevaluefromGDBString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(267,28) Hint: (5062) Found abstract method: createbasevaluefromGDBString(;AnsiString;AnsiString;var vardesk); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(1461,22) Warning: (4046) Constructing a class "typemanager" with abstract method "readbasetypes" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(249,29) Hint: (5062) Found abstract method: readbasetypes(); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(1461,22) Warning: (4046) Constructing a class "typemanager" with abstract method "readexttypes" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(250,29) Hint: (5062) Found abstract method: readexttypes(;AnsiString); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(1461,22) Warning: (4046) Constructing a class "typemanager" with abstract method "_TypeName2Index" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(251,28) Hint: (5062) Found abstract method: _TypeName2Index(;AnsiString):LongInt; /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(1462,27) Warning: (4046) Constructing a class "typemanager" with abstract method "readbasetypes" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(249,29) Hint: (5062) Found abstract method: readbasetypes(); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(1462,27) Warning: (4046) Constructing a class "typemanager" with abstract method "readexttypes" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(250,29) Hint: (5062) Found abstract method: readexttypes(;AnsiString); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(1462,27) Warning: (4046) Constructing a class "typemanager" with abstract method "_TypeName2Index" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(251,28) Hint: (5062) Found abstract method: _TypeName2Index(;AnsiString):LongInt; /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(1463,31) Warning: (4046) Constructing a class "varmanager" with abstract method "createvariablebytype" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(266,28) Hint: (5062) Found abstract method: createvariablebytype(;AnsiString;AnsiString); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(1463,31) Warning: (4046) Constructing a class "varmanager" with abstract method "createbasevaluefromGDBString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(267,28) Hint: (5062) Found abstract method: createbasevaluefromGDBString(;AnsiString;AnsiString;var vardesk); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(1472,16) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(1607,16) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(1643,34) Hint: (5091) Local variable "cn" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varman.pas(1654,18) Warning: (5043) Symbol "ShortDateFormat" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UObjectDescriptor.pas(365,85) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UObjectDescriptor.pas(75,68) Hint: (5024) Parameter "obj" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UObjectDescriptor.pas(464,59) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UObjectDescriptor.pas(465,50) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UObjectDescriptor.pas(464,50) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UObjectDescriptor.pas(653,27) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UObjectDescriptor.pas(68,73) Hint: (5024) Parameter "mode" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UObjectDescriptor.pas(26,34) Hint: (5023) Unit "gzctnrvectorp" not used in UObjectDescriptor /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/URecordDescriptor.pas(78,66) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/URecordDescriptor.pas(78,51) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/URecordDescriptor.pas(101,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/URecordDescriptor.pas(101,40) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/URecordDescriptor.pas(37,48) Hint: (5024) Parameter "oper" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/URecordDescriptor.pas(221,81) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/URecordDescriptor.pas(221,73) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/URecordDescriptor.pas(383,45) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/URecordDescriptor.pas(419,33) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/URecordDescriptor.pas(477,85) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/URecordDescriptor.pas(493,68) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/URecordDescriptor.pas(529,96) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/URecordDescriptor.pas(529,88) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/URecordDescriptor.pas(545,84) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/URecordDescriptor.pas(545,76) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UPointerDescriptor.pas(40,49) Hint: (5024) Parameter "membuf" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UPointerDescriptor.pas(40,75) Hint: (5024) Parameter "PInstance" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UPointerDescriptor.pas(40,93) Hint: (5024) Parameter "prefix" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UPointerDescriptor.pas(39,119) Hint: (5024) Parameter "psa" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UPointerDescriptor.pas(79,31) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UPointerDescriptor.pas(34,71) Hint: (5024) Parameter "mode" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UPointerDescriptor.pas(169,38) Warning: (4046) Constructing a class "GDBPointerDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UPointerDescriptor.pas(169,38) Warning: (4046) Constructing a class "GDBPointerDescriptor" with abstract method "SetValueFromString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(166,36) Hint: (5062) Found abstract method: SetValueFromString(;Pointer;AnsiString); (1010) Writing Resource String Table file: UPointerDescriptor.rsj (3104) Compiling languade.pas (3104) Compiling langsystem.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/langsystem.pas(77,40) Hint: (5024) Parameter "rez" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/langsystem.pas(83,40) Hint: (5024) Parameter "rez" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/langsystem.pas(82,41) Hint: (5024) Parameter "rez" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/languade.pas(207,22) Hint: (5024) Parameter "vd" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/languade.pas(207,35) Hint: (5024) Parameter "value" not used (3104) Compiling UArrayDescriptor.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UArrayDescriptor.pas(86,26) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UArrayDescriptor.pas(37,54) Hint: (5024) Parameter "f" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UArrayDescriptor.pas(37,71) Hint: (5024) Parameter "mode" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UArrayDescriptor.pas(37,212) Hint: (5024) Parameter "ValKey" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UArrayDescriptor.pas(37,219) Hint: (5024) Parameter "ValType" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(79,35) Warning: (3177) Some fields coming after "Attributes" were not initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(86,29) Warning: (3177) Some fields coming after "Size" were not initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(112,3) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(112,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(117,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(458,149) Warning: (4046) Constructing a class "GDBPointerDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(458,149) Warning: (4046) Constructing a class "GDBPointerDescriptor" with abstract method "SetValueFromString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(166,36) Hint: (5062) Found abstract method: SetValueFromString(;Pointer;AnsiString); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(478,101) Warning: (4046) Constructing a class "RecordDescriptor" with abstract method "SetValueFromString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(166,36) Hint: (5062) Found abstract method: SetValueFromString(;Pointer;AnsiString); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(495,101) Warning: (4046) Constructing a class "ObjectDescriptor" with abstract method "SetValueFromString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(166,36) Hint: (5062) Found abstract method: SetValueFromString(;Pointer;AnsiString); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(565,113) Warning: (4046) Constructing a class "ArrayDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(565,113) Warning: (4046) Constructing a class "ArrayDescriptor" with abstract method "SetValueFromString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(166,36) Hint: (5062) Found abstract method: SetValueFromString(;Pointer;AnsiString); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(674,62) Warning: (4045) Comparison might be always true due to range of constant and expression /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(675,51) Warning: (6018) unreachable code /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(680,103) Warning: (4046) Constructing a class "EnumDescriptor" with abstract method "ApplyOperator" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/varmandef.pas(155,36) Hint: (5062) Found abstract method: ApplyOperator(;AnsiString;AnsiString;var GDBInteger;out PUserTypeDescriptor); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(867,37) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/UUnitManager.pas(867,29) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/USinonimDescriptor.pas(100,31) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/zscript.pas(10,25) Hint: (5023) Unit "UArrayDescriptor" not used in zscript /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/zscript.pas(11,3) Hint: (5023) Unit "UEnumDescriptor" not used in zscript /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/zscript.pas(11,20) Hint: (5023) Unit "UObjectDescriptor" not used in zscript /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/zscript.pas(12,11) Hint: (5023) Unit "USinonimDescriptor" not used in zscript (1008) 7187 lines compiled, 3.8 sec (1021) 72 warning(s) issued (1022) 106 hint(s) issued (1023) 5 note(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of zundostack 0.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zundostack/lib/x86_64-dragonfly/zundostack.compiled Info: (lazarus) Execute Title="Compile package zundostack 0.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zundostack/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase" Info: (lazarus) Param[10]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zundostack" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[13]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[14]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/lib/x86_64-dragonfly" Info: (lazarus) Param[15]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/lib/x86_64-dragonfly" Info: (lazarus) Param[16]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zmath/lib/x86_64-dragonfly" Info: (lazarus) Param[17]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/lib/x86_64-dragonfly" Info: (lazarus) Param[18]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zundostack/lib/x86_64-dragonfly/" Info: (lazarus) Param[19]="zundostack.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling zundostack.pas (3104) Compiling zebaseundocommands.pas (3104) Compiling zeundostack.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zundostack/zeundostack.pas(119,32) Warning: (4046) Constructing a class "TChangeCommand" with abstract method "Comit" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zundostack/zebaseundocommands.pas(32,36) Hint: (5062) Found abstract method: Comit(); /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zundostack/zeundostack.pas(223,74) Warning: (5090) Variable "msg" of a managed type does not seem to be initialized (1008) 603 lines compiled, 0.8 sec (1021) 2 warning(s) issued (1022) 3 hint(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of zobjectinspector 0.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/lib/x86_64-dragonfly/zobjectinspector.compiled Info: (lazarus) Execute Title="Compile package zobjectinspector 0.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase" Info: (lazarus) Param[10]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[13]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[14]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly/gtk2" Info: (lazarus) Param[15]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/lib/x86_64-dragonfly" Info: (lazarus) Param[16]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/lib/x86_64-dragonfly" Info: (lazarus) Param[17]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/lib/x86_64-dragonfly" Info: (lazarus) Param[18]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zmath/lib/x86_64-dragonfly" Info: (lazarus) Param[19]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/lib/x86_64-dragonfly" Info: (lazarus) Param[20]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/lib/x86_64-dragonfly" Info: (lazarus) Param[21]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zundostack/lib/x86_64-dragonfly" Info: (lazarus) Param[22]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/lib/x86_64-dragonfly/" Info: (lazarus) Param[23]="-dLCL" Info: (lazarus) Param[24]="-dLCLgtk2" Info: (lazarus) Param[25]="zobjectinspector.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling zobjectinspector.pas (3104) Compiling zcobjectinspector.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(164,25) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(164,57) Hint: (5024) Parameter "Shift" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(162,24) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(114,35) Hint: (5024) Parameter "UndoStack" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(570,4) Note: (5025) Local variable "fer" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(571,4) Note: (5025) Local variable "FESize" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(572,4) Note: (5025) Local variable "temp" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(732,77) Hint: (5024) Parameter "TextDetails" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(106,23) Hint: (5024) Parameter "sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(1189,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(131,31) Hint: (5024) Parameter "Data" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(1244,95) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(1266,4) Note: (5025) Local variable "r" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(132,31) Hint: (5024) Parameter "pp" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(1364,3) Note: (5025) Local variable "FESize" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(1538,88) Warning: (5066) Symbol "ReadOnly" is deprecated: "Will be removed in 2.2 - use extended Style values instead." /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(1521,3) Note: (5025) Local variable "FESize" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(1710,113) Warning: (5066) Symbol "ReadOnly" is deprecated: "Will be removed in 2.2 - use extended Style values instead." /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(1749,3) Note: (5025) Local variable "fesize" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(1958,21) Note: (5025) Local variable "Widget" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspector.pas(112,25) Hint: (5024) Parameter "sender" not used (3104) Compiling zcobjectinspectoreditors.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectoreditors.pas(32,99) Hint: (5024) Parameter "rect" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectoreditors.pas(32,229) Hint: (5024) Parameter "preferedHeight" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectoreditors.pas(110,13) Warning: (5066) Symbol "ReadOnly" is deprecated: "Will be removed in 2.2 - use extended Style values instead." /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectoreditors.pas(33,99) Hint: (5024) Parameter "rect" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectoreditors.pas(33,128) Hint: (5024) Parameter "psa" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectoreditors.pas(33,179) Hint: (5024) Parameter "InitialValue" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectoreditors.pas(137,13) Warning: (5066) Symbol "ReadOnly" is deprecated: "Will be removed in 2.2 - use extended Style values instead." /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectoreditors.pas(34,99) Hint: (5024) Parameter "rect" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectoreditors.pas(34,128) Hint: (5024) Parameter "psa" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectoreditors.pas(34,179) Hint: (5024) Parameter "InitialValue" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectoreditors.pas(166,13) Warning: (5066) Symbol "ReadOnly" is deprecated: "Will be removed in 2.2 - use extended Style values instead." /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectoreditors.pas(35,99) Hint: (5024) Parameter "rect" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectoreditors.pas(35,128) Hint: (5024) Parameter "psa" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectoreditors.pas(35,179) Hint: (5024) Parameter "InitialValue" not used (3104) Compiling zcobjectinspectorui.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectorui.pas(48,3) Note: (5025) Local variable "Details" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectorui.pas(49,3) Note: (5025) Local variable "ComboElem" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectorui.pas(25,41) Hint: (5024) Parameter "PInstance" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectorui.pas(26,45) Hint: (5024) Parameter "PInstance" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectorui.pas(27,60) Hint: (5024) Parameter "ARect" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectorui.pas(31,53) Hint: (5024) Parameter "PInstance" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectorui.pas(32,58) Hint: (5024) Parameter "PInstance" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectorui.pas(33,61) Hint: (5024) Parameter "PInstance" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectorui.pas(34,58) Hint: (5024) Parameter "PInstance" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectorui.pas(35,62) Hint: (5024) Parameter "PInstance" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zcobjectinspectorui.pas(36,61) Hint: (5024) Parameter "PInstance" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zobjectinspector.pas(10,22) Hint: (5023) Unit "zcobjectinspectoreditors" not used in zobjectinspector /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/zobjectinspector.pas(10,48) Hint: (5023) Unit "zcobjectinspectorui" not used in zobjectinspector (1008) 2489 lines compiled, 1.3 sec (1021) 5 warning(s) issued (1022) 35 hint(s) issued (1023) 10 note(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of ztoolbars 0.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/lib/x86_64-dragonfly/ztoolbars.compiled Info: (lazarus) Execute Title="Compile package ztoolbars 0.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[10]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[11]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/rtl-generics_for_FPC304/lib/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[13]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly/gtk2" Info: (lazarus) Param[14]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/" Info: (lazarus) Param[15]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/lib/x86_64-dragonfly/" Info: (lazarus) Param[16]="-dLCL" Info: (lazarus) Param[17]="-dLCLgtk2" Info: (lazarus) Param[18]="ztoolbars.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling ztoolbars.pas (3104) Compiling uztoolbarsmanager.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(65,100) Warning: (2005) Comment level 2 found /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(362,3) Note: (5025) Local variable "ta" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(134,41) Hint: (5024) Parameter "atype" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(386,3) Note: (5025) Local variable "ta" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(136,38) Hint: (5024) Parameter "aNode" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(672,3) Note: (5025) Local variable "ta" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(138,55) Hint: (5024) Parameter "CloseAction" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(761,20) Note: (5025) Local variable "TBNodeType" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(780,3) Note: (5025) Local variable "TBType" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(792,10) Note: (5025) Local variable "TBSubNode" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(811,27) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(813,10) Note: (5025) Local variable "TBSubNode" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(814,3) Note: (5027) Local variable "TBType" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(928,3) Note: (5025) Local variable "FloatHost" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(141,39) Hint: (5024) Parameter "aTBNode" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(141,63) Hint: (5024) Parameter "aType" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(143,41) Hint: (5024) Parameter "aName" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(143,71) Hint: (5024) Parameter "CategoryOverrider" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(143,96) Hint: (5024) Parameter "actlist" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(1042,9) Warning: (4040) Class types "TMenuItem" and "TPopupMenu" are not related /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(1021,3) Note: (5025) Local variable "mcf" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(144,41) Hint: (5024) Parameter "aName" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(144,71) Hint: (5024) Parameter "actlist" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(1059,5) Warning: (4040) Class types "TMenuItem" and "TPopupMenu" are not related /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(145,39) Hint: (5024) Parameter "aName" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(145,69) Hint: (5024) Parameter "actlist" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(1065,3) Note: (5025) Local variable "ts" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(146,33) Hint: (5024) Parameter "aName" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(146,83) Hint: (5024) Parameter "RootMenuItem" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(147,30) Hint: (5024) Parameter "aName" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(147,60) Hint: (5024) Parameter "actlist" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(147,80) Hint: (5024) Parameter "RootMenuItem" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(1107,7) Warning: (4040) Class types "TMenuItem" and "TPopupMenu" are not related /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(148,42) Hint: (5024) Parameter "aName" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(148,56) Hint: (5024) Parameter "aNode" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(148,72) Hint: (5024) Parameter "actlist" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(149,34) Hint: (5024) Parameter "aName" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(149,48) Hint: (5024) Parameter "aNode" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/uztoolbarsmanager.pas(149,64) Hint: (5024) Parameter "actlist" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.defaults.pas(285,33) Hint: (5024) Parameter "AFrom" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.defaults.pas(285,40) Hint: (5024) Parameter "ATo" not used Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crc670624DF" with abstract method "DoMoveNext" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.collections.pas(121,14) Hint: (5062) Found abstract method: DoMoveNext():Boolean; Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crc670624DF" with abstract method "GetCurrent" Hint: (5062) Found abstract method: GetCurrent():; Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crc6098B671" with abstract method "DoMoveNext" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.collections.pas(121,14) Hint: (5062) Found abstract method: DoMoveNext():Boolean; Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crc6098B671" with abstract method "GetCurrent" Hint: (5062) Found abstract method: GetCurrent(;):AnsiString; /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.defaults.pas(285,33) Hint: (5024) Parameter "AFrom" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.defaults.pas(285,40) Hint: (5024) Parameter "ATo" not used Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crc1AA5DABF" with abstract method "DoMoveNext" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.collections.pas(121,14) Hint: (5062) Found abstract method: DoMoveNext():Boolean; Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crc1AA5DABF" with abstract method "GetCurrent" Hint: (5062) Found abstract method: GetCurrent():; Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crcF4DA5FD3" with abstract method "DoMoveNext" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.collections.pas(121,14) Hint: (5062) Found abstract method: DoMoveNext():Boolean; Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crcF4DA5FD3" with abstract method "GetCurrent" Hint: (5062) Found abstract method: GetCurrent(;):AnsiString; /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.defaults.pas(285,33) Hint: (5024) Parameter "AFrom" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.defaults.pas(285,40) Hint: (5024) Parameter "ATo" not used Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crcD7EB0A59" with abstract method "DoMoveNext" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.collections.pas(121,14) Hint: (5062) Found abstract method: DoMoveNext():Boolean; Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crcD7EB0A59" with abstract method "GetCurrent" Hint: (5062) Found abstract method: GetCurrent():; Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crcE2512B27" with abstract method "DoMoveNext" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.collections.pas(121,14) Hint: (5062) Found abstract method: DoMoveNext():Boolean; Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crcE2512B27" with abstract method "GetCurrent" Hint: (5062) Found abstract method: GetCurrent(;):AnsiString; /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.defaults.pas(285,33) Hint: (5024) Parameter "AFrom" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.defaults.pas(285,40) Hint: (5024) Parameter "ATo" not used Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crc06E1C5D5" with abstract method "DoMoveNext" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.collections.pas(121,14) Hint: (5062) Found abstract method: DoMoveNext():Boolean; Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crc06E1C5D5" with abstract method "GetCurrent" Hint: (5062) Found abstract method: GetCurrent():; Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crc8107DE98" with abstract method "DoMoveNext" /construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/generics.collections.pas(121,14) Hint: (5062) Found abstract method: DoMoveNext():Boolean; Warning: (4046) Constructing a class "TCustomDictionaryEnumerator$4$crc8107DE98" with abstract method "GetCurrent" Hint: (5062) Found abstract method: GetCurrent(;):AnsiString; (1008) 1162 lines compiled, 4.2 sec (1021) 21 warning(s) issued (1022) 49 hint(s) issued (1023) 11 note(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of ag_vectors 0.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/lib/x86_64-dragonfly/ag_vectors.compiled Info: (lazarus) Execute Title="Compile package ag_vectors 0.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors" Info: (lazarus) Param[10]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[13]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/" Info: (lazarus) Param[14]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/lib/x86_64-dragonfly/" Info: (lazarus) Param[15]="ag_vectors.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling ag_vectors.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ExtType.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int16g.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Vectors.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ExtSys.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectErr.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ExtSys.pas(531,23) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ExtSys.pas(1693,5) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ExtSys.pas(1693,20) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ExtSys.pas(1693,5) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ExtSys.pas(1693,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ExtSys.pas(2288,47) Hint: (5057) Local variable "BMH" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ExtSys.pas(3045,20) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ExtSys.pas(3045,11) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ExtSys.pas(3054,20) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ExtSys.pas(3054,11) Hint: (4055) Conversion between ordinals and pointers is not portable (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStream.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(262,13) Hint: (5057) Local variable "L" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(310,18) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(320,18) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(325,18) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(330,18) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(335,18) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(340,18) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(345,18) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(229,31) Hint: (5024) Parameter "Buffer" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(229,39) Hint: (5024) Parameter "Count" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(230,27) Hint: (5024) Parameter "Buffer" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(230,35) Hint: (5024) Parameter "Count" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(271,23) Hint: (5024) Parameter "NewSize" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(275,31) Hint: (5024) Parameter "Buffer" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(275,39) Hint: (5024) Parameter "Count" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(342,23) Hint: (5024) Parameter "NewSize" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(1048,13) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(1048,32) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(367,31) Hint: (5024) Parameter "Buffer" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(367,39) Hint: (5024) Parameter "Count" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(1180,17) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(1180,34) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(1220,28) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(391,27) Hint: (5024) Parameter "Buffer" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(391,35) Hint: (5024) Parameter "Count" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(1255,31) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(1255,48) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(403,23) Hint: (5024) Parameter "NewSize" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(407,31) Hint: (5024) Parameter "Buffer" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(407,39) Hint: (5024) Parameter "Count" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Vectors.pas(257,3) Hint: (5028) Local const "Quantum" is not used (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Base16v.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VTxtStrm.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectStr.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectStr.pas(1901,5) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectStr.pas(1901,20) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectStr.pas(1949,5) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectStr.pas(1949,20) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectStr.pas(3326,29) Hint: (5057) Local variable "N1" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectStr.pas(3326,51) Hint: (5057) Local variable "N2" does not seem to be initialized (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFStream.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VGeneric.imp(19,6) Hint: (5023) Unit "ExtSys" not used in Int16g (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int16v.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectProc.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectProc.pas(43,42) Hint: (5024) Parameter "Vector2" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectProc.pas(124,37) Hint: (5024) Parameter "Dummy" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectProc.pas(125,38) Hint: (5024) Parameter "Dummy" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectProc.pas(126,38) Hint: (5024) Parameter "Dummy" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectProc.pas(127,39) Hint: (5024) Parameter "Dummy" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectProc.pas(128,38) Hint: (5024) Parameter "Dummy" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectProc.pas(129,39) Hint: (5024) Parameter "Dummy" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectProc.pas(131,40) Hint: (5024) Parameter "Dummy" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectProc.pas(132,43) Hint: (5024) Parameter "Dummy" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectProc.pas(133,40) Hint: (5024) Parameter "Dummy" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectProc.pas(134,43) Hint: (5024) Parameter "Dummy" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectProc.pas(135,40) Hint: (5024) Parameter "Dummy" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VectProc.pas(136,43) Hint: (5024) Parameter "Dummy" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Sort16s.inc(22,17) Hint: (5057) Local variable "C1" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Sort16s.inc(22,17) Hint: (5057) Local variable "C1" does not seem to be initialized (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int16sv.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Indexsv.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Indexv.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int32g.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Base32v.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VGeneric.imp(19,6) Hint: (5023) Unit "ExtSys" not used in Int32g /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Indexv.pas(140,33) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Indexv.pas(146,29) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Indexv.pas(154,24) Hint: (5057) Local variable "J" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Indexv.pas(168,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Indexv.pas(175,33) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Indexv.pas(183,33) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Indexsv.pas(15,3) Hint: (5023) Unit "ExtType" not used in Indexsv /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Indexsv.pas(15,20) Hint: (5023) Unit "Int32g" not used in Indexsv (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int16m.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasv.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int32v.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int32sv.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/UInt16g.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VGeneric.imp(19,6) Hint: (5023) Unit "ExtSys" not used in UInt16g (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/UInt16v.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Sort16u.inc(21,16) Hint: (5057) Local variable "C" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Sort16u.inc(21,16) Hint: (5057) Local variable "C" does not seem to be initialized (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/UInt16sv.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/UInt32g.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VGeneric.imp(19,6) Hint: (5023) Unit "ExtSys" not used in UInt32g (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/UInt32v.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/UInt32sv.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F32g.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(270,16) Hint: (5094) Function result variable of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(271,23) Warning: (5043) Symbol "DecimalSeparator" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(272,45) Warning: (5043) Symbol "DecimalSeparator" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(279,23) Warning: (5043) Symbol "DecimalSeparator" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(280,45) Warning: (5043) Symbol "DecimalSeparator" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(97,9) Hint: (5024) Parameter "RealFormat" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(303,46) Warning: (5043) Symbol "LongDateFormat" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(427,59) Warning: (5043) Symbol "ShortDateFormat" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(457,39) Hint: (5057) Local variable "LastPos" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(515,20) Warning: (5043) Symbol "TimeSeparator" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(516,48) Warning: (5043) Symbol "TimeSeparator" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(517,27) Warning: (5043) Symbol "TimeSeparator" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(533,40) Hint: (5057) Local variable "LastChar" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(536,49) Warning: (5043) Symbol "TimeSeparator" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(604,16) Hint: (5094) Function result variable of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(605,23) Warning: (5043) Symbol "DecimalSeparator" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(606,45) Warning: (5043) Symbol "DecimalSeparator" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFormat.pas(611,49) Warning: (5043) Symbol "ShortTimeFormat" is deprecated /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VGeneric.imp(19,6) Hint: (5023) Unit "ExtSys" not used in F32g (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F32v.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F32sv.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F64g.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Base64v.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VGeneric.imp(19,6) Hint: (5023) Unit "ExtSys" not used in F64g (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F64v.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F64sv.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F80g.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Base80v.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VGeneric.imp(19,6) Hint: (5023) Unit "ExtSys" not used in F80g (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F80v.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F80sv.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasv.pas(10,3) Hint: (5023) Unit "ExtType" not used in Aliasv /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasv.pas(10,12) Hint: (5023) Unit "Int16g" not used in Aliasv /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasv.pas(10,20) Hint: (5023) Unit "Int16v" not used in Aliasv /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasv.pas(10,28) Hint: (5023) Unit "Int16sv" not used in Aliasv /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasv.pas(11,3) Hint: (5023) Unit "UInt16g" not used in Aliasv /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasv.pas(11,12) Hint: (5023) Unit "UInt16v" not used in Aliasv /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasv.pas(11,21) Hint: (5023) Unit "UInt16sv" not used in Aliasv /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasv.pas(12,3) Hint: (5023) Unit "F32g" not used in Aliasv /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasv.pas(12,9) Hint: (5023) Unit "F32v" not used in Aliasv /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasv.pas(12,15) Hint: (5023) Unit "F32sv" not used in Aliasv /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasv.pas(12,41) Hint: (5023) Unit "F80g" not used in Aliasv /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasv.pas(12,47) Hint: (5023) Unit "F80v" not used in Aliasv /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasv.pas(12,53) Hint: (5023) Unit "F80sv" not used in Aliasv (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Pointerv.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Pointerv.pas(34,29) Hint: (5024) Parameter "VStream" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Pointerv.pas(35,30) Hint: (5024) Parameter "VStream" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Pointerv.pas(334,13) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Pointerv.pas(335,17) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Pointerv.pas(338,19) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Pointerv.pas(335,17) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Pointerv.pas(338,19) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VCheck.inc(8,4) Warning: (2010) Misplaced global compiler switch, ignored /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(214,23) Hint: (5024) Parameter "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(267,25) Hint: (5024) Parameter "AVector" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(268,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(296,35) Hint: (5024) Parameter "AColCount" not used (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int32m.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VCheck.inc(8,4) Warning: (2010) Misplaced global compiler switch, ignored /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(214,23) Hint: (5024) Parameter "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(267,25) Hint: (5024) Parameter "AVector" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(268,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(296,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int32m.pas(10,72) Hint: (5023) Unit "Int16g" not used in Int32m (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/UInt16m.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VCheck.inc(8,4) Warning: (2010) Misplaced global compiler switch, ignored /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(214,23) Hint: (5024) Parameter "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(267,25) Hint: (5024) Parameter "AVector" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(268,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(296,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/UInt16m.pas(11,3) Hint: (5023) Unit "Int16g" not used in UInt16m (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/UInt32m.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VCheck.inc(8,4) Warning: (2010) Misplaced global compiler switch, ignored /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(214,23) Hint: (5024) Parameter "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(267,25) Hint: (5024) Parameter "AVector" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(268,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(296,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/UInt32m.pas(11,3) Hint: (5023) Unit "Int16g" not used in UInt32m (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F32m.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VCheck.inc(8,4) Warning: (2010) Misplaced global compiler switch, ignored /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(214,23) Hint: (5024) Parameter "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(267,25) Hint: (5024) Parameter "AVector" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(268,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(296,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F32m.pas(10,56) Hint: (5023) Unit "Int16g" not used in F32m (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F64m.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VCheck.inc(8,4) Warning: (2010) Misplaced global compiler switch, ignored /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(214,23) Hint: (5024) Parameter "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(267,25) Hint: (5024) Parameter "AVector" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(268,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(296,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F64m.pas(10,56) Hint: (5023) Unit "Int16g" not used in F64m (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F80m.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VCheck.inc(8,4) Warning: (2010) Misplaced global compiler switch, ignored /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(214,23) Hint: (5024) Parameter "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(267,25) Hint: (5024) Parameter "AVector" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(268,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(296,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F80m.pas(10,56) Hint: (5023) Unit "Int16g" not used in F80m /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(10,3) Hint: (5023) Unit "ExtType" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(10,12) Hint: (5023) Unit "Int16g" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(10,20) Hint: (5023) Unit "Int16v" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(10,28) Hint: (5023) Unit "Int16sv" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(10,37) Hint: (5023) Unit "Int16m" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(10,45) Hint: (5023) Unit "Int32g" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(10,53) Hint: (5023) Unit "Int32v" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(10,61) Hint: (5023) Unit "Int32sv" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(11,3) Hint: (5023) Unit "UInt16g" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(11,12) Hint: (5023) Unit "UInt16v" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(11,21) Hint: (5023) Unit "UInt16sv" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(11,31) Hint: (5023) Unit "UInt16m" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(11,40) Hint: (5023) Unit "UInt32g" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(11,49) Hint: (5023) Unit "UInt32v" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(11,58) Hint: (5023) Unit "UInt32sv" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(12,3) Hint: (5023) Unit "F32g" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(12,9) Hint: (5023) Unit "F32v" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(12,15) Hint: (5023) Unit "F32sv" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(12,22) Hint: (5023) Unit "F32m" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(12,28) Hint: (5023) Unit "F64g" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(12,34) Hint: (5023) Unit "F64v" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(12,40) Hint: (5023) Unit "F64sv" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(12,53) Hint: (5023) Unit "F80g" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(12,59) Hint: (5023) Unit "F80v" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(12,65) Hint: (5023) Unit "F80sv" not used in Aliasm /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Aliasm.pas(12,72) Hint: (5023) Unit "F80m" not used in Aliasm (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Base8v.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Boolm.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Boolv.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VCheck.inc(8,4) Warning: (2010) Misplaced global compiler switch, ignored /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(214,23) Hint: (5024) Parameter "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(267,25) Hint: (5024) Parameter "AVector" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(268,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(296,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Boolm.pas(15,56) Hint: (5023) Unit "Int16g" not used in Boolm (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ChckFree.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/LogFile.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/LogFile.pas(50,34) Hint: (5057) Local variable "N" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/LogFile.pas(103,60) Hint: (5057) Local variable "TextF" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/LogFile.pas(130,58) Hint: (5057) Local variable "TextF" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ChckFree.pas(94,27) Warning: (3005) Procedure type "FAR" ignored (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc16.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(82,39) Warning: (4110) range check error while evaluating constants (3993919788 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(82,51) Warning: (4110) range check error while evaluating constants (2567524794 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(83,39) Warning: (4110) range check error while evaluating constants (3915621685 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(83,51) Warning: (4110) range check error while evaluating constants (2657392035 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(84,39) Warning: (4110) range check error while evaluating constants (3772115230 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(84,51) Warning: (4110) range check error while evaluating constants (2547177864 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(85,39) Warning: (4110) range check error while evaluating constants (3887607047 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(85,51) Warning: (4110) range check error while evaluating constants (2428444049 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(87,39) Warning: (4110) range check error while evaluating constants (4089016648 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(87,51) Warning: (4110) range check error while evaluating constants (2227061214 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(88,39) Warning: (4110) range check error while evaluating constants (4107580753 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(88,51) Warning: (4110) range check error while evaluating constants (2211677639 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(89,39) Warning: (4110) range check error while evaluating constants (4251122042 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(89,51) Warning: (4110) range check error while evaluating constants (2321926636 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(90,39) Warning: (4110) range check error while evaluating constants (4195302755 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(90,51) Warning: (4110) range check error while evaluating constants (2366115317 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(92,39) Warning: (4110) range check error while evaluating constants (3579855332 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(92,51) Warning: (4110) range check error while evaluating constants (2724688242 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(93,39) Warning: (4110) range check error while evaluating constants (3524101629 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(93,51) Warning: (4110) range check error while evaluating constants (2768942443 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(94,39) Warning: (4110) range check error while evaluating constants (3686517206 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(94,51) Warning: (4110) range check error while evaluating constants (2898065728 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(95,39) Warning: (4110) range check error while evaluating constants (3705015759 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(95,51) Warning: (4110) range check error while evaluating constants (2882616665 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(97,39) Warning: (4110) range check error while evaluating constants (3369554304 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(97,51) Warning: (4110) range check error while evaluating constants (3218104598 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(98,39) Warning: (4110) range check error while evaluating constants (3485111705 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(98,51) Warning: (4110) range check error while evaluating constants (3099436303 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(99,39) Warning: (4110) range check error while evaluating constants (3322730930 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(99,51) Warning: (4110) range check error while evaluating constants (2970347812 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(100,39) Warning: (4110) range check error while evaluating constants (3244367275 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(100,51) Warning: (4110) range check error while evaluating constants (3060149565 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(102,39) Warning: (4110) range check error while evaluating constants (2563907772 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(102,51) Warning: (4110) range check error while evaluating constants (4023717930 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(103,39) Warning: (4110) range check error while evaluating constants (2680153253 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(103,51) Warning: (4110) range check error while evaluating constants (3904427059 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(104,39) Warning: (4110) range check error while evaluating constants (2517215374 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(104,51) Warning: (4110) range check error while evaluating constants (3775830040 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(105,39) Warning: (4110) range check error while evaluating constants (2439277719 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(105,51) Warning: (4110) range check error while evaluating constants (3865271297 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(107,39) Warning: (4110) range check error while evaluating constants (2238001368 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(107,51) Warning: (4110) range check error while evaluating constants (4066508878 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(108,39) Warning: (4110) range check error while evaluating constants (2181625025 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(108,51) Warning: (4110) range check error while evaluating constants (4111451223 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(109,39) Warning: (4110) range check error while evaluating constants (2344532202 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(109,51) Warning: (4110) range check error while evaluating constants (4240017532 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(110,39) Warning: (4110) range check error while evaluating constants (2362670323 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(110,51) Warning: (4110) range check error while evaluating constants (4224994405 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(112,39) Warning: (4110) range check error while evaluating constants (2747007092 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(112,51) Warning: (4110) range check error while evaluating constants (3569037538 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(113,39) Warning: (4110) range check error while evaluating constants (2765210733 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(113,51) Warning: (4110) range check error while evaluating constants (3554079995 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(114,39) Warning: (4110) range check error while evaluating constants (2909243462 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(114,51) Warning: (4110) range check error while evaluating constants (3663771856 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(115,39) Warning: (4110) range check error while evaluating constants (2852801631 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(115,51) Warning: (4110) range check error while evaluating constants (3708648649 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(117,39) Warning: (4110) range check error while evaluating constants (3188396048 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(117,51) Warning: (4110) range check error while evaluating constants (3373015174 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(118,39) Warning: (4110) range check error while evaluating constants (3110523913 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(118,51) Warning: (4110) range check error while evaluating constants (3462522015 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(119,39) Warning: (4110) range check error while evaluating constants (2966460450 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(119,51) Warning: (4110) range check error while evaluating constants (3352799412 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(120,39) Warning: (4110) range check error while evaluating constants (3082640443 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(120,51) Warning: (4110) range check error while evaluating constants (3233442989 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(122,15) Warning: (4110) range check error while evaluating constants (3988292384 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(122,27) Warning: (4110) range check error while evaluating constants (2596254646 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(123,15) Warning: (4110) range check error while evaluating constants (3939845945 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(123,27) Warning: (4110) range check error while evaluating constants (2647816111 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(124,15) Warning: (4110) range check error while evaluating constants (3814918930 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(124,27) Warning: (4110) range check error while evaluating constants (2489596804 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(125,15) Warning: (4110) range check error while evaluating constants (3826175755 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(125,27) Warning: (4110) range check error while evaluating constants (2466906013 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(127,15) Warning: (4110) range check error while evaluating constants (4027552580 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(127,27) Warning: (4110) range check error while evaluating constants (2265490386 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(128,15) Warning: (4110) range check error while evaluating constants (4150417245 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(128,27) Warning: (4110) range check error while evaluating constants (2154129355 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(129,15) Warning: (4110) range check error while evaluating constants (4275313526 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(129,27) Warning: (4110) range check error while evaluating constants (2312317920 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(130,15) Warning: (4110) range check error while evaluating constants (4189708143 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(130,27) Warning: (4110) range check error while evaluating constants (2394877945 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(132,15) Warning: (4110) range check error while evaluating constants (3604390888 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(132,27) Warning: (4110) range check error while evaluating constants (2714866558 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(133,15) Warning: (4110) range check error while evaluating constants (3518719985 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(133,27) Warning: (4110) range check error while evaluating constants (2797360999 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(134,15) Warning: (4110) range check error while evaluating constants (3624741850 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(134,27) Warning: (4110) range check error while evaluating constants (2936675148 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(135,15) Warning: (4110) range check error while evaluating constants (3747672003 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(135,27) Warning: (4110) range check error while evaluating constants (2825379669 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(137,15) Warning: (4110) range check error while evaluating constants (3412177804 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(137,27) Warning: (4110) range check error while evaluating constants (3160834842 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(138,15) Warning: (4110) range check error while evaluating constants (3423369109 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(138,27) Warning: (4110) range check error while evaluating constants (3138078467 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(139,15) Warning: (4110) range check error while evaluating constants (3317316542 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(139,27) Warning: (4110) range check error while evaluating constants (2998733608 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(140,15) Warning: (4110) range check error while evaluating constants (3268935591 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(140,27) Warning: (4110) range check error while evaluating constants (3050360625 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(142,15) Warning: (4110) range check error while evaluating constants (2607071920 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(142,27) Warning: (4110) range check error while evaluating constants (3965973030 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(143,15) Warning: (4110) range check error while evaluating constants (2617837225 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(143,27) Warning: (4110) range check error while evaluating constants (3943577151 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(144,15) Warning: (4110) range check error while evaluating constants (2512341634 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(144,27) Warning: (4110) range check error while evaluating constants (3803740692 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(145,15) Warning: (4110) range check error while evaluating constants (2463272603 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(145,27) Warning: (4110) range check error while evaluating constants (3855990285 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(147,15) Warning: (4110) range check error while evaluating constants (2262029012 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(147,27) Warning: (4110) range check error while evaluating constants (4057260610 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(148,15) Warning: (4110) range check error while evaluating constants (2176718541 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(148,27) Warning: (4110) range check error while evaluating constants (4139329115 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(149,15) Warning: (4110) range check error while evaluating constants (2282248934 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(149,27) Warning: (4110) range check error while evaluating constants (4279200368 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(150,15) Warning: (4110) range check error while evaluating constants (2405801727 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(150,27) Warning: (4110) range check error while evaluating constants (4167216745 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(152,15) Warning: (4110) range check error while evaluating constants (2685067896 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(152,27) Warning: (4110) range check error while evaluating constants (3608007406 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(153,15) Warning: (4110) range check error while evaluating constants (2808555105 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(153,27) Warning: (4110) range check error while evaluating constants (3495958263 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(154,15) Warning: (4110) range check error while evaluating constants (2932959818 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(154,27) Warning: (4110) range check error while evaluating constants (3654703836 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(155,15) Warning: (4110) range check error while evaluating constants (2847714899 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(155,27) Warning: (4110) range check error while evaluating constants (3736837829 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(157,15) Warning: (4110) range check error while evaluating constants (3183342108 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(157,27) Warning: (4110) range check error while evaluating constants (3401237130 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(158,15) Warning: (4110) range check error while evaluating constants (3134207493 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(158,27) Warning: (4110) range check error while evaluating constants (3453421203 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(159,15) Warning: (4110) range check error while evaluating constants (3009837614 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(159,27) Warning: (4110) range check error while evaluating constants (3294710456 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(160,15) Warning: (4110) range check error while evaluating constants (3020668471 must be between -2147483648 and 2147483647) /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Crc32.pas(160,27) Warning: (4110) range check error while evaluating constants (3272380065 must be between -2147483648 and 2147483647) (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F_PQueue.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F_PQueue.pas(91,50) Warning: (3005) Procedure type "FAR" ignored /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F_PQueue.pas(99,17) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F_PQueue.pas(99,42) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F_PQueue.pas(102,19) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F_PQueue.pas(102,44) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F_PQueue.pas(99,17) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F_PQueue.pas(99,42) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F_PQueue.pas(102,19) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F_PQueue.pas(102,44) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(88,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(162,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(188,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(230,28) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(268,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(271,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(289,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(290,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(302,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(303,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(337,6) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(349,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(360,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(364,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(379,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(392,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(407,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(428,32) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(435,29) Hint: (5057) Local variable "B" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(460,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(770,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(774,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(798,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(802,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/F_PQueue.pas(22,30) Hint: (5023) Unit "Pointerv" not used in F_PQueue (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/II64Dic.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(88,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(162,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(188,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(230,28) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(268,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(271,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(289,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(290,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(302,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(303,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(337,6) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(349,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(360,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(364,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(379,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(392,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(407,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(428,32) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(435,29) Hint: (5057) Local variable "B" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(460,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(770,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(774,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(798,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(802,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(26,34) Hint: (5057) Local variable "Node" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(44,34) Hint: (5057) Local variable "Node" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(65,58) Hint: (5057) Local variable "TreeFoundData" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(78,61) Hint: (5057) Local variable "TreeFoundData" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/II64Dic.pas(15,30) Hint: (5023) Unit "Pointerv" not used in II64Dic (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/IIDic.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(88,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(162,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(188,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(230,28) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(268,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(271,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(289,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(290,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(302,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(303,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(337,6) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(349,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(360,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(364,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(379,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(392,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(407,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(428,32) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(435,29) Hint: (5057) Local variable "B" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(460,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(770,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(774,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(798,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(802,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(26,34) Hint: (5057) Local variable "Node" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(44,34) Hint: (5057) Local variable "Node" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(65,58) Hint: (5057) Local variable "TreeFoundData" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(78,61) Hint: (5057) Local variable "TreeFoundData" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/IIDic.pas(15,30) Hint: (5023) Unit "Pointerv" not used in IIDic (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int8g.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VGeneric.imp(19,6) Hint: (5023) Unit "ExtSys" not used in Int8g (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int8m.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int8v.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Sort8.inc(22,16) Hint: (5057) Local variable "C" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Sort8.inc(22,16) Hint: (5057) Local variable "C" does not seem to be initialized (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int8sv.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VCheck.inc(8,4) Warning: (2010) Misplaced global compiler switch, ignored /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(214,23) Hint: (5024) Parameter "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(267,25) Hint: (5024) Parameter "AVector" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(268,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(296,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int8m.pas(10,69) Hint: (5023) Unit "Int16g" not used in Int8m (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int64g.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VGeneric.imp(19,6) Hint: (5023) Unit "ExtSys" not used in Int64g (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int64m.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int64v.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int64sv.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VCheck.inc(8,4) Warning: (2010) Misplaced global compiler switch, ignored /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(214,23) Hint: (5024) Parameter "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(267,25) Hint: (5024) Parameter "AVector" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(268,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(296,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Int64m.pas(16,72) Hint: (5023) Unit "Int16g" not used in Int64m (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/IPDic.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(88,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(162,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(188,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(230,28) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(268,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(271,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(289,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(290,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(302,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(303,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(337,6) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(349,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(360,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(364,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(379,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(392,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(407,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(428,32) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(435,29) Hint: (5057) Local variable "B" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(460,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(770,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(774,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(798,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(802,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(26,34) Hint: (5057) Local variable "Node" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(44,34) Hint: (5057) Local variable "Node" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(65,58) Hint: (5057) Local variable "TreeFoundData" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(78,61) Hint: (5057) Local variable "TreeFoundData" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/IPDic.pas(15,30) Hint: (5023) Unit "Pointerv" not used in IPDic (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/IQueue.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ISDic.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(88,26) Hint: (5094) Function result variable of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(162,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(188,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(230,28) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(268,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(271,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(289,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(290,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(302,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(303,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(337,6) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(349,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(360,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(364,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(379,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(392,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(407,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(428,32) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(435,29) Hint: (5057) Local variable "B" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(460,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(770,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(774,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(798,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(802,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(26,34) Hint: (5057) Local variable "Node" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(44,34) Hint: (5057) Local variable "Node" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(65,58) Hint: (5091) Local variable "TreeFoundData" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(78,61) Hint: (5091) Local variable "TreeFoundData" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ISDic.pas(15,30) Hint: (5023) Unit "Pointerv" not used in ISDic (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/IStack.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/MultiLst.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NLSTypes.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ParseCmd.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(154,14) Warning: (3057) An inherited method is hidden by "Equals(TStrLst):Boolean;" /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(705,48) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(711,57) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(922,35) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(233,41) Hint: (5024) Parameter "S1" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(233,45) Hint: (5024) Parameter "S2" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(240,22) Hint: (5024) Parameter "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(240,40) Hint: (5024) Parameter "Value" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(942,53) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(242,20) Hint: (5024) Parameter "CurIndex" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(242,30) Hint: (5024) Parameter "NewIndex" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(243,24) Hint: (5024) Parameter "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(244,28) Hint: (5024) Parameter "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(1067,38) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(308,41) Hint: (5024) Parameter "S1" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrLst.pas(308,45) Hint: (5024) Parameter "S2" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ParseCmd.pas(172,41) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ParseCmd.pas(176,39) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ParseCmd.pas(181,58) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/ParseCmd.pas(100,52) Hint: (5024) Parameter "Remove" not used (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/PQueue.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/PStack.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.pas(34,15) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.pas(34,34) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.pas(34,15) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.pas(34,34) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(88,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(162,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(188,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(230,28) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(268,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(271,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(289,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(290,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(302,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(303,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(337,6) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(349,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(360,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(364,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(379,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(392,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(407,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(428,32) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(435,29) Hint: (5057) Local variable "B" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(460,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(770,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(774,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(798,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(802,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.pas(15,13) Hint: (5023) Unit "ExtType" not used in RBTree /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.pas(15,30) Hint: (5023) Unit "Pointerv" not used in RBTree (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/SIDic.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(88,26) Hint: (5094) Function result variable of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(162,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(188,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(230,28) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(268,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(271,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(289,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(290,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(302,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(303,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(337,6) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(349,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(360,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(364,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(379,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(392,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(407,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(428,32) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(435,29) Hint: (5057) Local variable "B" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(460,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(770,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(774,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(798,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(802,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(26,34) Hint: (5057) Local variable "Node" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(44,34) Hint: (5057) Local variable "Node" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(65,58) Hint: (5091) Local variable "TreeFoundData" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(78,61) Hint: (5091) Local variable "TreeFoundData" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/SIDic.pas(15,13) Hint: (5023) Unit "ExtType" not used in SIDic /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/SIDic.pas(15,30) Hint: (5023) Unit "Pointerv" not used in SIDic (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/SIQueue.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(88,26) Hint: (5094) Function result variable of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(162,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(188,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(230,28) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(268,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(271,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(289,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(290,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(302,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(303,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(337,6) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(349,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(360,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(364,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(379,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(392,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(407,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(428,32) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(435,29) Hint: (5057) Local variable "B" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(460,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(770,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(774,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(798,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(802,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/SIQueue.pas(15,38) Hint: (5023) Unit "Int16v" not used in SIQueue /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/SIQueue.pas(15,46) Hint: (5023) Unit "Pointerv" not used in SIQueue (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/SPDic.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(88,26) Hint: (5094) Function result variable of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(162,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(188,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(230,28) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(268,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(271,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(289,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(290,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(302,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(303,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(337,6) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(349,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(360,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(364,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(379,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(392,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(407,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(428,32) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(435,29) Hint: (5057) Local variable "B" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(460,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(770,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(774,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(798,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(802,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(26,34) Hint: (5057) Local variable "Node" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(44,34) Hint: (5057) Local variable "Node" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(65,58) Hint: (5091) Local variable "TreeFoundData" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(78,61) Hint: (5091) Local variable "TreeFoundData" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/SPDic.pas(105,22) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/SPDic.pas(111,16) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/SPDic.pas(223,35) Warning: (4056) Conversion between ordinals and pointers is not portable (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/SQueue.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/SSDic.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(88,26) Hint: (5094) Function result variable of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(162,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(160,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(164,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(175,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(188,12) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(186,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(190,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(201,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(230,28) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(268,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(271,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(289,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(290,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(302,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(303,26) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(252,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(337,6) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(349,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(360,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(364,14) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(379,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(392,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(407,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(338,20) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(410,27) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(411,28) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(414,22) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(428,32) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(435,29) Hint: (5057) Local variable "B" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(460,26) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(770,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(774,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(798,8) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/RBTree.imp(802,16) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(26,34) Hint: (5057) Local variable "Node" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(44,34) Hint: (5057) Local variable "Node" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(65,58) Hint: (5091) Local variable "TreeFoundData" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Dic.imp(78,61) Hint: (5091) Local variable "TreeFoundData" of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/SSDic.pas(15,13) Hint: (5023) Unit "ExtType" not used in SSDic /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/SSDic.pas(15,30) Hint: (5023) Unit "Pointerv" not used in SSDic (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrCount.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrCount.pas(15,22) Hint: (5023) Unit "Pointerv" not used in StrCount /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/StrCount.pas(15,32) Hint: (5023) Unit "Aliasv" not used in StrCount (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/UInt8g.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VGeneric.imp(19,6) Hint: (5023) Unit "ExtSys" not used in UInt8g (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/UInt8m.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/UInt8v.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Sort8.inc(22,16) Hint: (5057) Local variable "C" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/Sort8.inc(22,16) Hint: (5057) Local variable "C" does not seem to be initialized (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/UInt8sv.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VCheck.inc(8,4) Warning: (2010) Misplaced global compiler switch, ignored /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(214,23) Hint: (5024) Parameter "I" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(267,25) Hint: (5024) Parameter "AVector" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(268,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/NumMatr.def(296,35) Hint: (5024) Parameter "AColCount" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/UInt8m.pas(10,72) Hint: (5023) Unit "Int16g" not used in UInt8m (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VCLCmpt.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VComUtil.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFileLst.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFileSys.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFileSys.pas(314,11) Warning: (4104) Implicit string type conversion from "AnsiString" to "WideString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFileSys.pas(810,13) Warning: (4104) Implicit string type conversion from "AnsiString" to "WideString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFileSys.pas(12,13) Hint: (5023) Unit "ExtType" not used in VFileSys /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFileSys.pas(12,39) Hint: (5023) Unit "VectErr" not used in VFileSys /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFileLst.pas(288,3) Note: (5027) Local variable "F1" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFileLst.pas(11,13) Hint: (5023) Unit "ExtType" not used in VFileLst /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VFileLst.pas(11,22) Hint: (5023) Unit "ExtSys" not used in VFileLst (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm64.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(262,13) Hint: (5057) Local variable "L" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(310,18) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(320,18) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(325,18) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(330,18) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(335,18) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(340,18) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(345,18) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(229,31) Hint: (5024) Parameter "Buffer" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(229,39) Hint: (5024) Parameter "Count" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(230,27) Hint: (5024) Parameter "Buffer" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(230,35) Hint: (5024) Parameter "Count" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(271,23) Hint: (5024) Parameter "NewSize" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(275,31) Hint: (5024) Parameter "Buffer" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(275,39) Hint: (5024) Parameter "Count" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(342,23) Hint: (5024) Parameter "NewSize" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(1048,13) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(1048,32) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(367,31) Hint: (5024) Parameter "Buffer" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(367,39) Hint: (5024) Parameter "Count" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(1180,17) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(1180,34) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(1220,28) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(391,27) Hint: (5024) Parameter "Buffer" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(391,35) Hint: (5024) Parameter "Count" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(1255,31) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.imp(1255,48) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(403,23) Hint: (5024) Parameter "NewSize" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(407,31) Hint: (5024) Parameter "Buffer" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrm.def(407,39) Hint: (5024) Parameter "Count" not used (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrmCrc.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors/VStrmCrc.pas(16,22) Hint: (5024) Parameter "AStream" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(10,3) Hint: (5023) Unit "Aliasm" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(10,11) Hint: (5023) Unit "Aliasv" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(10,19) Hint: (5023) Unit "Base8v" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(10,27) Hint: (5023) Unit "Base16v" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(10,36) Hint: (5023) Unit "Base32v" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(10,45) Hint: (5023) Unit "Base64v" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(10,54) Hint: (5023) Unit "Base80v" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(10,63) Hint: (5023) Unit "Boolm" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(10,70) Hint: (5023) Unit "Boolv" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(11,13) Hint: (5023) Unit "Crc16" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(11,20) Hint: (5023) Unit "Crc32" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(11,27) Hint: (5023) Unit "ExtSys" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(11,35) Hint: (5023) Unit "ExtType" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(11,44) Hint: (5023) Unit "F_PQueue" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(11,54) Hint: (5023) Unit "F32g" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(11,60) Hint: (5023) Unit "F32m" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(11,66) Hint: (5023) Unit "F32sv" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(11,73) Hint: (5023) Unit "F32v" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(12,3) Hint: (5023) Unit "F64g" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(12,9) Hint: (5023) Unit "F64m" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(12,15) Hint: (5023) Unit "F64sv" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(12,22) Hint: (5023) Unit "F64v" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(12,28) Hint: (5023) Unit "F80g" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(12,34) Hint: (5023) Unit "F80m" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(12,40) Hint: (5023) Unit "F80sv" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(12,47) Hint: (5023) Unit "F80v" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(12,53) Hint: (5023) Unit "II64Dic" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(12,62) Hint: (5023) Unit "IIDic" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(12,69) Hint: (5023) Unit "Indexsv" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(13,3) Hint: (5023) Unit "Indexv" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(13,11) Hint: (5023) Unit "Int8g" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(13,18) Hint: (5023) Unit "Int8m" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(13,25) Hint: (5023) Unit "Int8sv" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(13,33) Hint: (5023) Unit "Int8v" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(13,40) Hint: (5023) Unit "Int16g" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(13,48) Hint: (5023) Unit "Int16m" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(13,56) Hint: (5023) Unit "Int16sv" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(13,65) Hint: (5023) Unit "Int16v" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(14,3) Hint: (5023) Unit "Int32g" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(14,11) Hint: (5023) Unit "Int32m" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(14,19) Hint: (5023) Unit "Int32sv" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(14,28) Hint: (5023) Unit "Int32v" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(14,36) Hint: (5023) Unit "Int64g" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(14,44) Hint: (5023) Unit "Int64m" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(14,52) Hint: (5023) Unit "Int64sv" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(14,61) Hint: (5023) Unit "Int64v" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(14,69) Hint: (5023) Unit "IPDic" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(15,3) Hint: (5023) Unit "IQueue" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(15,11) Hint: (5023) Unit "ISDic" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(15,18) Hint: (5023) Unit "IStack" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(15,26) Hint: (5023) Unit "LogFile" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(15,35) Hint: (5023) Unit "MultiLst" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(15,45) Hint: (5023) Unit "NLSTypes" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(15,55) Hint: (5023) Unit "ParseCmd" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(15,65) Hint: (5023) Unit "Pointerv" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(16,3) Hint: (5023) Unit "PQueue" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(16,11) Hint: (5023) Unit "PStack" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(16,19) Hint: (5023) Unit "RBTree" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(16,27) Hint: (5023) Unit "SIDic" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(16,34) Hint: (5023) Unit "SIQueue" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(16,43) Hint: (5023) Unit "SPDic" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(16,50) Hint: (5023) Unit "SQueue" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(16,58) Hint: (5023) Unit "SSDic" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(16,65) Hint: (5023) Unit "StrCount" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(17,3) Hint: (5023) Unit "StrLst" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(17,11) Hint: (5023) Unit "UInt8g" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(17,19) Hint: (5023) Unit "UInt8m" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(17,27) Hint: (5023) Unit "UInt8sv" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(17,36) Hint: (5023) Unit "UInt8v" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(17,44) Hint: (5023) Unit "UInt16g" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(17,53) Hint: (5023) Unit "UInt16m" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(17,62) Hint: (5023) Unit "UInt16sv" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(18,3) Hint: (5023) Unit "UInt16v" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(18,12) Hint: (5023) Unit "UInt32g" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(18,21) Hint: (5023) Unit "UInt32m" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(18,30) Hint: (5023) Unit "UInt32sv" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(18,40) Hint: (5023) Unit "UInt32v" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(18,49) Hint: (5023) Unit "VCLCmpt" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(18,58) Hint: (5023) Unit "VComUtil" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(18,68) Hint: (5023) Unit "VectErr" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(19,3) Hint: (5023) Unit "Vectors" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(19,12) Hint: (5023) Unit "VectProc" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(19,22) Hint: (5023) Unit "VectStr" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(19,31) Hint: (5023) Unit "VFileLst" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(19,41) Hint: (5023) Unit "VFileSys" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(19,60) Hint: (5023) Unit "VFStream" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(19,70) Hint: (5023) Unit "VStream" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(20,3) Hint: (5023) Unit "VStrm64" not used in ag_vectors /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_vectors.pas(20,12) Hint: (5023) Unit "VStrmCrc" not used in ag_vectors (1008) 100915 lines compiled, 5.9 sec (1021) 307 warning(s) issued (1022) 707 hint(s) issued (1023) 1 note(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of ag_attr 0.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/lib/x86_64-dragonfly/ag_attr.compiled Info: (lazarus) Execute Title="Compile package ag_attr 0.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors" Info: (lazarus) Param[10]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[13]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[14]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/lib/x86_64-dragonfly" Info: (lazarus) Param[15]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/" Info: (lazarus) Param[16]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/lib/x86_64-dragonfly/" Info: (lazarus) Param[17]="ag_attr.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling ag_attr.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrErr.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrMap.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrType.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrMap.pas(11,13) Hint: (5023) Unit "VectStr" not used in AttrMap (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(286,8) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(287,27) Warning: (4104) Implicit string type conversion from "AnsiString" to "WideString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(289,18) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(289,10) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(286,8) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(289,18) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(303,26) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(303,17) Hint: (4055) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(305,33) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(308,17) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(308,9) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(303,26) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(308,17) Warning: (4082) Converting pointers to signed integers may result in wrong comparison results and range errors, use an unsigned type instead. /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(588,66) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(799,33) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(809,34) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(819,33) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(829,33) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(839,34) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(849,35) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(859,34) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(869,35) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(879,36) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(889,36) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(899,36) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(909,36) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(931,35) Hint: (5094) Function result variable of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(942,39) Hint: (5094) Function result variable of a managed type does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(977,31) Warning: (4105) Implicit string type conversion with potential data loss from "WideString" to "AnsiString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Attrs/AttrSet.pas(1040,53) Warning: (4104) Implicit string type conversion from "AnsiString" to "WideString" /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_attr.pas(10,3) Hint: (5023) Unit "AttrErr" not used in ag_attr /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_attr.pas(10,12) Hint: (5023) Unit "AttrMap" not used in ag_attr /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_attr.pas(10,21) Hint: (5023) Unit "AttrSet" not used in ag_attr (1008) 2910 lines compiled, 0.4 sec (1021) 14 warning(s) issued (1022) 22 hint(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of ag_math 0.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/lib/x86_64-dragonfly/ag_math.compiled Info: (lazarus) Execute Title="Compile package ag_math 0.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors" Info: (lazarus) Param[10]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[13]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[14]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/lib/x86_64-dragonfly" Info: (lazarus) Param[15]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/" Info: (lazarus) Param[16]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/lib/x86_64-dragonfly/" Info: (lazarus) Param[17]="ag_math.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling ag_math.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Gauss.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/MathErr.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Gauss.pas(17,28) Hint: (5023) Unit "Int16v" not used in Gauss /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Gauss.pas(17,36) Hint: (5023) Unit "F32g" not used in Gauss /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Gauss.pas(17,48) Hint: (5023) Unit "F80g" not used in Gauss /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Gauss.pas(17,54) Hint: (5023) Unit "F32m" not used in Gauss /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Gauss.pas(17,60) Hint: (5023) Unit "F32v" not used in Gauss /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Gauss.pas(17,66) Hint: (5023) Unit "F64v" not used in Gauss /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Gauss.pas(17,72) Hint: (5023) Unit "F80v" not used in Gauss /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Gauss.pas(18,9) Hint: (5023) Unit "F80m" not used in Gauss /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Gauss.pas(18,22) Hint: (5023) Unit "VectErr" not used in Gauss /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Gauss.pas(18,31) Hint: (5023) Unit "MathErr" not used in Gauss (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Geom_2d.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Geom_2d.pas(217,43) Hint: (5057) Local variable "T" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Geom_2d.pas(225,53) Hint: (5057) Local variable "P" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Geom_2d.pas(225,50) Hint: (5057) Local variable "T" does not seem to be initialized (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Geom_3d.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Geom_3d.pas(45,36) Hint: (5057) Local variable "D" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Geom_3d.pas(45,33) Hint: (5057) Local variable "C" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Geom_3d.pas(45,30) Hint: (5057) Local variable "B" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Geom_3d.pas(45,27) Hint: (5057) Local variable "A" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Geom_3d.pas(10,28) Hint: (5023) Unit "F32g" not used in Geom_3d /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Geom_3d.pas(10,40) Hint: (5023) Unit "F80g" not used in Geom_3d /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Geom_3d.pas(10,46) Hint: (5023) Unit "F32m" not used in Geom_3d /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Geom_3d.pas(10,58) Hint: (5023) Unit "F80m" not used in Geom_3d (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Grevil.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Grevil.pas(34,28) Hint: (5023) Unit "F32v" not used in Grevil /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Grevil.pas(34,40) Hint: (5023) Unit "F80v" not used in Grevil /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Grevil.pas(34,46) Hint: (5023) Unit "F32m" not used in Grevil /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Grevil.pas(34,58) Hint: (5023) Unit "F80m" not used in Grevil /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Grevil.pas(34,64) Hint: (5023) Unit "VectErr" not used in Grevil /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Grevil.pas(34,73) Hint: (5023) Unit "MathErr" not used in Grevil (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Optimize.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Optimize.pas(182,46) Hint: (5060) Function result variable does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Optimize.pas(18,36) Hint: (5023) Unit "Int16v" not used in Optimize /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Optimize.pas(18,44) Hint: (5023) Unit "Int16g" not used in Optimize /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Optimize.pas(18,52) Hint: (5023) Unit "Int16m" not used in Optimize /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Optimize.pas(18,68) Hint: (5023) Unit "F32v" not used in Optimize /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Optimize.pas(19,27) Hint: (5023) Unit "VectErr" not used in Optimize /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/Optimize.pas(19,36) Hint: (5023) Unit "MathErr" not used in Optimize (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/SLS_Iter.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/SLS_Iter.pas(20,28) Hint: (5023) Unit "F32v" not used in SLS_Iter /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/SLS_Iter.pas(20,40) Hint: (5023) Unit "F80v" not used in SLS_Iter /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/SLS_Iter.pas(20,46) Hint: (5023) Unit "F32m" not used in SLS_Iter /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/SLS_Iter.pas(20,58) Hint: (5023) Unit "F80m" not used in SLS_Iter /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/SLS_Iter.pas(20,64) Hint: (5023) Unit "VectErr" not used in SLS_Iter (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/SVD.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/SVD.pas(12,38) Hint: (5023) Unit "F32v" not used in SVD /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/SVD.pas(12,50) Hint: (5023) Unit "F80v" not used in SVD /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/SVD.pas(12,64) Hint: (5023) Unit "F32m" not used in SVD /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Math/SVD.pas(12,76) Hint: (5023) Unit "F80m" not used in SVD /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_math.pas(10,3) Hint: (5023) Unit "Gauss" not used in ag_math /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_math.pas(10,10) Hint: (5023) Unit "Geom_2d" not used in ag_math /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_math.pas(10,19) Hint: (5023) Unit "Geom_3d" not used in ag_math /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_math.pas(10,28) Hint: (5023) Unit "Grevil" not used in ag_math /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_math.pas(10,36) Hint: (5023) Unit "MathErr" not used in ag_math /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_math.pas(10,45) Hint: (5023) Unit "Optimize" not used in ag_math /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_math.pas(10,55) Hint: (5023) Unit "SLS_Iter" not used in ag_math /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_math.pas(10,65) Hint: (5023) Unit "SVD" not used in ag_math (1008) 3914 lines compiled, 0.5 sec (1022) 53 hint(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of ag_graph 0.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/lib/x86_64-dragonfly/ag_graph.compiled Info: (lazarus) Execute Title="Compile package ag_graph 0.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors" Info: (lazarus) Param[10]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[13]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[14]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/lib/x86_64-dragonfly" Info: (lazarus) Param[15]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/" Info: (lazarus) Param[16]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/lib/x86_64-dragonfly/" Info: (lazarus) Param[17]="ag_graph.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling ag_graph.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/CTrick.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/GraphErr.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas(2396,24) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas(330,38) Hint: (5024) Parameter "FromVertex" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas(383,49) Hint: (5024) Parameter "FromVertex" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas(5396,22) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas(5663,26) Warning: (4056) Conversion between ordinals and pointers is not portable /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas(16,17) Hint: (5023) Unit "Int8v" not used in Graphs /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas(16,24) Hint: (5023) Unit "Int16v" not used in Graphs /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas(16,32) Hint: (5023) Unit "Int16g" not used in Graphs /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas(16,40) Hint: (5023) Unit "Int16m" not used in Graphs /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas(16,48) Hint: (5023) Unit "UInt16v" not used in Graphs /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas(16,73) Hint: (5023) Unit "F32v" not used in Graphs /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas(17,3) Hint: (5023) Unit "F80v" not used in Graphs /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas(17,9) Hint: (5023) Unit "F32m" not used in Graphs /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas(17,21) Hint: (5023) Unit "F80m" not used in Graphs /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Graphs.pas(18,21) Hint: (5023) Unit "AttrErr" not used in Graphs /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/CTrick.pas(35,20) Hint: (5023) Unit "Int16g" not used in CTrick /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/CTrick.pas(35,28) Hint: (5023) Unit "Int16v" not used in CTrick /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/CTrick.pas(35,44) Hint: (5023) Unit "Int16m" not used in CTrick /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/CTrick.pas(36,3) Hint: (5023) Unit "VectErr" not used in CTrick /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/CTrick.pas(36,12) Hint: (5023) Unit "GraphErr" not used in CTrick (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/EulerCyc.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/ExtGraph.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/ExtGraph.pas(10,45) Hint: (5023) Unit "Int16g" not used in ExtGraph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/ExtGraph.pas(10,53) Hint: (5023) Unit "Int16v" not used in ExtGraph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/ExtGraph.pas(10,61) Hint: (5023) Unit "Int16m" not used in ExtGraph (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/GMLObj.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/GraphGML.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/RWGML.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/GraphGML.pas(38,3) Hint: (5028) Local const "Version" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/GraphGML.pas(61,3) Hint: (5028) Local const "KeyVersion" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/GraphGML.pas(10,50) Hint: (5023) Unit "Aliasv" not used in GraphGML /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/GraphGML.pas(10,58) Hint: (5023) Unit "Int16v" not used in GraphGML /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/GraphGML.pas(10,66) Hint: (5023) Unit "Int32v" not used in GraphGML (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/GraphIO.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/GrColor.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/GrColor.pas(11,20) Hint: (5023) Unit "Int16g" not used in GrColor /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/GrColor.pas(11,28) Hint: (5023) Unit "Int16v" not used in GrColor /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/GrColor.pas(11,52) Hint: (5023) Unit "VectErr" not used in GrColor (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/HamilCyc.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/HamilCyc.pas(169,31) Hint: (5057) Local variable "K" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/HamilCyc.pas(169,28) Hint: (5057) Local variable "J" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/HamilCyc.pas(10,30) Hint: (5023) Unit "Int16v" not used in HamilCyc /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/HamilCyc.pas(10,73) Hint: (5023) Unit "VectErr" not used in HamilCyc (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Isomorph.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/VFState.pas (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/VFGraph.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/VFState.pas(11,38) Hint: (5023) Unit "Int16v" not used in VFState /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/VFState.pas(11,46) Hint: (5023) Unit "UInt16v" not used in VFState /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Isomorph.pas(25,40) Hint: (5023) Unit "Boolv" not used in Isomorph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Isomorph.pas(25,62) Hint: (5023) Unit "Int16v" not used in Isomorph (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/MapColor.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/MapColor.pas(15,20) Hint: (5023) Unit "Int16g" not used in MapColor /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/MapColor.pas(15,28) Hint: (5023) Unit "Int16v" not used in MapColor (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/MinPath.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/MinPath.pas(10,20) Hint: (5023) Unit "F64v" not used in MinPath /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/MinPath.pas(10,26) Hint: (5023) Unit "Boolv" not used in MinPath /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/MinPath.pas(10,43) Hint: (5023) Unit "PStack" not used in MinPath /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/MinPath.pas(10,59) Hint: (5023) Unit "VectErr" not used in MinPath (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Planar.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Planar.pas(190,19) Hint: (5057) Local variable "W" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Planar.pas(190,16) Hint: (5057) Local variable "X" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Planar.pas(328,28) Hint: (5057) Local variable "W" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Planar.pas(328,25) Hint: (5057) Local variable "V" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Planar.pas(18,38) Hint: (5023) Unit "Int16v" not used in Planar (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Postman.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Postman.pas(98,69) Hint: (5057) Local variable "Sum" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Postman.pas(11,30) Hint: (5023) Unit "F32v" not used in Postman /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Postman.pas(11,36) Hint: (5023) Unit "F64v" not used in Postman /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Postman.pas(11,42) Hint: (5023) Unit "F80v" not used in Postman /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Postman.pas(11,48) Hint: (5023) Unit "Boolv" not used in Postman /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Postman.pas(11,62) Hint: (5023) Unit "Int16v" not used in Postman /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Postman.pas(12,43) Hint: (5023) Unit "VectErr" not used in Postman (3104) Compiling /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Steiner.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Graphs/Steiner.pas(21,30) Hint: (5023) Unit "Int16v" not used in Steiner /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(10,3) Hint: (5023) Unit "CTrick" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(10,11) Hint: (5023) Unit "EulerCyc" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(10,21) Hint: (5023) Unit "ExtGraph" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(10,31) Hint: (5023) Unit "GMLObj" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(10,39) Hint: (5023) Unit "GraphErr" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(10,49) Hint: (5023) Unit "GraphGML" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(10,59) Hint: (5023) Unit "GraphIO" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(10,68) Hint: (5023) Unit "Graphs" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(11,3) Hint: (5023) Unit "GrColor" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(11,12) Hint: (5023) Unit "HamilCyc" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(11,22) Hint: (5023) Unit "Isomorph" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(11,32) Hint: (5023) Unit "MapColor" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(11,42) Hint: (5023) Unit "MinPath" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(11,51) Hint: (5023) Unit "Planar" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(11,59) Hint: (5023) Unit "Postman" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(12,3) Hint: (5023) Unit "Steiner" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(12,12) Hint: (5023) Unit "VFGraph" not used in ag_graph /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/ag_graph.pas(12,21) Hint: (5023) Unit "VFState" not used in ag_graph (1008) 15158 lines compiled, 2.2 sec (1021) 3 warning(s) issued (1022) 75 hint(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" Hint: (lazarus) Missing state file of uniqueinstance_package 1.0: /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/uniqueinstance/lib/x86_64-dragonfly-gtk2/uniqueinstance_package.compiled Info: (lazarus) Execute Title="Compile package uniqueinstance_package 1.0" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/uniqueinstance/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scgi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O2" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[10]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[11]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[12]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly/gtk2" Info: (lazarus) Param[13]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/uniqueinstance/" Info: (lazarus) Param[14]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/uniqueinstance/lib/x86_64-dragonfly-gtk2/" Info: (lazarus) Param[15]="-dLCL" Info: (lazarus) Param[16]="-dLCLgtk2" Info: (lazarus) Param[17]="uniqueinstance_package.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling uniqueinstance_package.pas (3104) Compiling uniqueinstance.pas (3104) Compiling uniqueinstancebase.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/uniqueinstance/uniqueinstance.pas(56,30) Hint: (5024) Parameter "Sender" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/uniqueinstance/uniqueinstance.pas(58,28) Hint: (5024) Parameter "Sender" not used (3104) Compiling uniqueinstanceraw.pas (3104) Compiling registeruniqueinstance.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/uniqueinstance/uniqueinstance_package.pas(10,3) Hint: (5023) Unit "UniqueInstance" not used in uniqueinstance_package /construction/cad/zcad/zcad-0.9.8.4/cad_source/other/uniqueinstance/uniqueinstance_package.pas(10,19) Hint: (5023) Unit "UniqueInstanceRaw" not used in uniqueinstance_package (1008) 384 lines compiled, 0.6 sec (1022) 6 hint(s) issued SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" TProject.DoLoadStateFile Statefile not found: /construction/cad/zcad/zcad-0.9.8.4/cad_source/utils/lib/x86_64-dragonfly/typeexporter.compiled Info: (lazarus) Execute Title="Compile Project, Target: /construction/cad/zcad/zcad-0.9.8.4/environment/typeexporter/typeexporter" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/utils/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-MObjFPC" Info: (lazarus) Param[2]="-Scghi" Info: (lazarus) Param[3]="-Cg" Info: (lazarus) Param[4]="-O1" Info: (lazarus) Param[5]="-g" Info: (lazarus) Param[6]="-gl" Info: (lazarus) Param[7]="-l" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source" Info: (lazarus) Param[10]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/u" Info: (lazarus) Param[11]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/gdb" Info: (lazarus) Param[12]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/commands" Info: (lazarus) Param[13]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/gui" Info: (lazarus) Param[14]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/DeviceBase" Info: (lazarus) Param[15]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/languade" Info: (lazarus) Param[16]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/LCLmod" Info: (lazarus) Param[17]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/CAD" Info: (lazarus) Param[18]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/utils/lib/x86_64-dragonfly" Info: (lazarus) Param[19]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase" Info: (lazarus) Param[20]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source" Info: (lazarus) Param[21]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/u" Info: (lazarus) Param[22]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/gdb" Info: (lazarus) Param[23]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/commands" Info: (lazarus) Param[24]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/gui" Info: (lazarus) Param[25]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/DeviceBase" Info: (lazarus) Param[26]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/languade" Info: (lazarus) Param[27]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/LCLmod" Info: (lazarus) Param[28]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/CAD" Info: (lazarus) Param[29]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/lib/x86_64-dragonfly" Info: (lazarus) Param[30]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[31]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[32]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[33]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/utils/" Info: (lazarus) Param[34]="-FU/construction/cad/zcad/zcad-0.9.8.4/cad_source/utils/lib/x86_64-dragonfly/" Info: (lazarus) Param[35]="-FE/construction/cad/zcad/zcad-0.9.8.4/environment/typeexporter/" Info: (lazarus) Param[36]="-o/construction/cad/zcad/zcad-0.9.8.4/environment/typeexporter/typeexporter" Info: (lazarus) Param[37]="typeexporter.lpr" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling typeexporter.lpr /construction/cad/zcad/zcad-0.9.8.4/cad_source/utils/typeexporter.lpr(20,2) Warning: (2045) APPTYPE is not supported by the target OS (3104) Compiling iolow.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/utils/iolow.pas(40,5) Note: (3020) Class should have one destructor only /construction/cad/zcad/zcad-0.9.8.4/cad_source/utils/iolow.pas(148,3) Note: (5027) Local variable "cr" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/utils/typeexporter.lpr(54,10) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/utils/typeexporter.lpr(154,11) Note: (5027) Local variable "alreadyinuses" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/utils/typeexporter.lpr(24,7) Hint: (5028) Local const "IgnoreSHP" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/utils/typeexporter.lpr(25,7) Hint: (5028) Local const "BreakSHP" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/utils/typeexporter.lpr(34,4) Note: (5025) Local variable "FileName" not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/utils/typeexporter.lpr(65,11) Hint: (5028) Local proc "processfile" is not used (9022) Compiling resource /construction/cad/zcad/zcad-0.9.8.4/cad_source/utils/lib/x86_64-dragonfly/typeexporter.or (9015) Linking /construction/cad/zcad/zcad-0.9.8.4/environment/typeexporter/typeexporter (1008) 694 lines compiled, 0.9 sec (1021) 2 warning(s) issued (1022) 5 hint(s) issued (1023) 4 note(s) issued ZCAD data types export utility Usage: typeexporter.exe pathprefix=path/to/cad_source/ outputfile=path/to/cad/rtl/system.pas ParamStr(0) =typeexporter/typeexporter CurrentDir =/construction/cad/zcad/zcad-0.9.8.4/environment ProcessFiles =typeexporter/zcad.files PathPrefix =../cad_source/ OutputFile =../cad/rtl/system.pas AutoGeneratedFile=../cad_source/autogenerated/allgeneratedfiles.inc AutoRegisterPath =../cad_source/autogenerated/ ProcessFile =typeexporter/zcad.files Process file: ../cad_source/components/zebase/uzbtypesbase.pas...OK Process file: ../cad_source/components/zebase/uzbgeomtypes.pas...OK Process file: ../cad_source/components/zebase/uzbtypes.pas...OK Process file: ../cad_source/components/zmath/uzedimensionaltypes.pas...OK Process file: ../cad_source/zengine/core/objects/uzepalette.pas...OK Process file: ../cad_source/zcad/uzcsysparams.pas...OK Process file: ../cad_source/components/zcontainers/gzctnrvectortypes.pas...OK Process file: ../cad_source/components/zcontainers/gzctnrvector.pas...OK Process file: ../cad_source/components/zcontainers/gzctnrvectorsimple.pas...OK Process file: ../cad_source/components/zcontainers/gzctnrvectordata.pas...OK Process file: ../cad_source/components/zcontainers/gzctnrvectorp.pas...OK Process file: ../cad_source/components/zcontainers/gzctnrvectorpdata.pas...OK Process file: ../cad_source/components/zcontainers/gzctnrvectorpobjects.pas...OK Process file: ../cad_source/components/zcontainers/gzctnrvectorobjects.pas...OK Process file: ../cad_source/components/zcontainers/gzctnrvectorsimple.pas...OK Process file: ../cad_source/components/zcontainers/uzctnrvectorgdbstring.pas...OK Process file: ../cad_source/components/zcontainers/UGDBOpenArrayOfByte.pas...OK Process file: ../cad_source/components/zcontainers/uzctnrvectorgdbpointer.pas...OK Process file: ../cad_source/components/zcontainers/gzctnrtree.pas...OK Process file: ../cad_source/zengine/containers/UGDBOpenArrayOfPV.pas...OK Process file: ../cad_source/zengine/containers/UGDBVisibleOpenArray.pas...OK Process file: ../cad_source/zengine/containers/UGDBControlPointArray.pas...OK Process file: ../cad_source/zengine/containers/UGDBOutbound2DIArray.pas...OK Process file: ../cad_source/zengine/containers/UGDBPoint3DArray.pas...OK Process file: ../cad_source/zengine/containers/UGDBPolyLine2DArray.pas...OK Process file: ../cad_source/zengine/containers/UGDBPolyPoint2DArray.pas...OK Process file: ../cad_source/zengine/containers/UGDBSelectedObjArray.pas...OK Process file: ../cad_source/zengine/containers/uzctnrobjectschunk.pas...OK Process file: ../cad_source/zengine/fonts/uzefontbase.pas...OK Process file: ../cad_source/zengine/fonts/uzefontshx.pas...OK Process file: ../cad_source/zengine/fonts/uzefont.pas...OK Process file: ../cad_source/zengine/containers/UGDBXYZWStringArray.pas...OK Process file: ../cad_source/zengine/containers/UGDBVectorSnapArray.pas...OK Process file: ../cad_source/zengine/containers/UGDBLineWidthArray.pas...OK Process file: ../cad_source/zengine/containers/UGDBNamedObjectsArray.pas...OK Process file: ../cad_source/zengine/styles/uzestylestexts.pas...OK Process file: ../cad_source/zengine/styles/uzestyleslayers.pas...OK Process file: ../cad_source/zengine/styles/uzestyleslinetypes.pas...OK Process file: ../cad_source/zengine/styles/uzestylesdim.pas...OK Process file: ../cad_source/zengine/styles/uzestylestables.pas...OK Process file: ../cad_source/zengine/containers/UGDBTable.pas...OK Process file: ../cad_source/zcad/uzcsysvars.pas...OK Process file: ../cad_source/components/zscriptbase/uabstractunit.pas...OK Process file: ../cad_source/components/zscriptbase/varmandef.pas...OK Process file: ../cad_source/components/zscript/varman.pas...OK Process file: ../cad_source/zengine/zgl/uzgvertex3sarray.pas...OK Process file: ../cad_source/zengine/zgl/uzgindexsarray.pas...OK Process file: ../cad_source/zengine/zgl/uzglgeomdata.pas...OK Process file: ../cad_source/zengine/zgl/uzgprimitives.pas...OK Process file: ../cad_source/zengine/zgl/uzgprimitivessarray.pas...OK Process file: ../cad_source/zengine/zgl/uzglvectorobject.pas...OK Process file: ../cad_source/zengine/zgl/uzglgeometry.pas...OK Process file: ../cad_source/zengine/geomlib/uzgeomentity.pas...OK Process file: ../cad_source/zengine/geomlib/uzgeomentity3d.pas...OK Process file: ../cad_source/zengine/geomlib/uzgeomline3d.pas...OK Process file: ../cad_source/zengine/geomlib/uzegeomentitiestree.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentsubordinated.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentitiesprop.pas...OK Process file: ../cad_source/zengine/core/entities/uzeenrepresentation.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentity.pas...OK Process file: ../cad_source/zengine/core/entities/uzeent3d.pas...OK Process file: ../cad_source/zengine/core/entities/uzeent3dface.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentwithmatrix.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentwithlocalcs.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentsolid.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentplain.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentplainwithox.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentabstracttext.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentcircle.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentarc.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentellipse.pas...OK Process file: ../cad_source/zengine/core/objects/uzeentitiestree.pas...OK Process file: ../cad_source/zengine/containers/UGDBVisibleTreeArray.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentgenericsubentry.pas...OK Process file: ../cad_source/zengine/core/objects/uzeblockdef.pas...OK Process file: ../cad_source/zengine/containers/UGDBObjBlockdefArray.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentcomplex.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentdimension.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentdimensiongeneric.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentdimaligned.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentdimrotated.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentdimdiametric.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentdimradial.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentblockinsert.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentdevice.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentconnected.pas...OK Process file: ../cad_source/zengine/containers/UGDBGraf.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentline.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentlwpolyline.pas...OK Process file: ../cad_source/zengine/core/entities/uzeenttext.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentmtext.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentpoint.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentcurve.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentpolyline.pas...OK Process file: ../cad_source/zengine/core/entities/uzeentspline.pas...OK Process file: ../cad_source/zengine/core/objects/uzeroot.pas...OK Process file: ../cad_source/zengine/core/objects/uzecamera.pas...OK Process file: ../cad_source/zengine/core/entities/uzeenttable.pas...OK Process file: ../cad_source/zcad/devicebase/uzcdevicebaseabstract.pas...OK Process file: ../cad_source/zcad/devicebase/uzcdevicebase.pas...OK Process file: ../cad_source/zcad/commands/uzccommandsabstract.pas...OK Process file: ../cad_source/zcad/commands/uzccommandsimpl.pas...OK Process file: ../cad_source/zcad/commands/uzccomdraw.pas...OK Process file: ../cad_source/zcad/commands/uzccomexample.pas...OK Process file: ../cad_source/zengine/containers/UGDBTracePropArray.pas...OK Process file: ../cad_source/zengine/zgl/drawers/uzglviewareadata.pas...OK Process file: ../cad_source/components/zscript/UUnitManager.pas...OK Process file: ../cad_source/zengine/containers/UGDBNumerator.pas...OK Process file: ../cad_source/zengine/core/drawings/uzedrawingdef.pas...OK Process file: ../cad_source/zengine/core/drawings/uzedrawingabstract.pas...OK Process file: ../cad_source/zengine/core/drawings/uzedrawingsimple.pas...OK Process file: ../cad_source/zcad/core/drawings/uzcdrawings.pas...OK Process file: ../cad_source/zcad/gui/odjectinspector/uzcoiwrapper.pas...OK Process file: ../cad_source/zcad/gui/odjectinspector/uzcoimultiobjects.pas...OK Process file: ../cad_source/zengine/fonts/uzefontmanager.pas...OK Process file: ../cad_source/zengine/zgl/drawers/uzgldrawergdi.pas...OK Process file: ../cad_source/zengine/zgl/drawers/uzgldrawerogl.pas...OK Process file: ../cad_source/zengine/zgl/drawers/uzgldrawerdx.pas...OK SetPrimaryConfigPath NewValue="/construction/cad/zcad/zcad-0.9.8.4/tmppcp" -> "/construction/cad/zcad/zcad-0.9.8.4/tmppcp" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-iWTOTP" Hint: (lazarus) [RunTool] "/usr/local/bin/fpc" "-va" "compilertest.pas" TProject.DoLoadStateFile Statefile not found: /construction/cad/zcad/zcad-0.9.8.4/lib/x86_64-dragonfly/zcad.compiled Info: (lazarus) Execute Title="Compile Project, Mode: Default, Target: /construction/cad/zcad/zcad-0.9.8.4/cad/zcad" Info: (lazarus) Working Directory="/construction/cad/zcad/zcad-0.9.8.4/cad_source/" Info: (lazarus) Executable="/usr/local/bin/fpc" Info: (lazarus) Param[0]="-B" Info: (lazarus) Param[1]="-Rintel" Info: (lazarus) Param[2]="-MDelphi" Info: (lazarus) Param[3]="-Sca" Info: (lazarus) Param[4]="-Cg" Info: (lazarus) Param[5]="-O1" Info: (lazarus) Param[6]="-g" Info: (lazarus) Param[7]="-gl" Info: (lazarus) Param[8]="-vewnhibq" Info: (lazarus) Param[9]="-vm5062,5024,4056,4055,4046,4035" Info: (lazarus) Param[10]="-Se5" Info: (lazarus) Param[11]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad" Info: (lazarus) Param[12]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/autogenerated" Info: (lazarus) Param[13]="-Fi/construction/cad/zcad/zcad-0.9.8.4/lib/x86_64-dragonfly" Info: (lazarus) Param[14]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase" Info: (lazarus) Param[15]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraph/Vectors" Info: (lazarus) Param[16]="-Fi/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/Vectors" Info: (lazarus) Param[17]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zengine/containers" Info: (lazarus) Param[18]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zengine/styles" Info: (lazarus) Param[19]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zengine" Info: (lazarus) Param[20]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zengine/core" Info: (lazarus) Param[21]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zengine/core/entities" Info: (lazarus) Param[22]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zengine/core/drawings" Info: (lazarus) Param[23]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zengine/fonts" Info: (lazarus) Param[24]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zengine/zgl" Info: (lazarus) Param[25]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zengine/geomlib" Info: (lazarus) Param[26]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zengine/zgl/drawers" Info: (lazarus) Param[27]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zengine/misc" Info: (lazarus) Param[28]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zengine/fileformats" Info: (lazarus) Param[29]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other" Info: (lazarus) Param[30]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad" Info: (lazarus) Param[31]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/uniqueinstance" Info: (lazarus) Param[32]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/dx11" Info: (lazarus) Param[33]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/autogenerated" Info: (lazarus) Param[34]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad/electrotech" Info: (lazarus) Param[35]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad/lclmod" Info: (lazarus) Param[36]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad/commands" Info: (lazarus) Param[37]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad/devicebase" Info: (lazarus) Param[38]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad/gui" Info: (lazarus) Param[39]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad/gui/forms" Info: (lazarus) Param[40]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad/entities" Info: (lazarus) Param[41]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad" Info: (lazarus) Param[42]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad/gui/odjectinspector" Info: (lazarus) Param[43]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad/core/undostack" Info: (lazarus) Param[44]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad/register" Info: (lazarus) Param[45]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad/core/drawings" Info: (lazarus) Param[46]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zengine/core/utils" Info: (lazarus) Param[47]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad/core/utils" Info: (lazarus) Param[48]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zengine/core/objects" Info: (lazarus) Param[49]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad/core" Info: (lazarus) Param[50]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad/misc" Info: (lazarus) Param[51]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad/velec" Info: (lazarus) Param[52]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zobjectinspector/lib/x86_64-dragonfly" Info: (lazarus) Param[53]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zundostack/lib/x86_64-dragonfly" Info: (lazarus) Param[54]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscript/lib/x86_64-dragonfly" Info: (lazarus) Param[55]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/virtualtreeview/lib/x86_64-dragonfly-gtk2" Info: (lazarus) Param[56]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zscriptbase/lib/x86_64-dragonfly" Info: (lazarus) Param[57]="-Fu/usr/local/share/lazarus-2.0.8/components/printers/lib/x86_64-dragonfly/gtk2" Info: (lazarus) Param[58]="-Fu/usr/local/share/lazarus-2.0.8/components/ideintf/units/x86_64-dragonfly/gtk2" Info: (lazarus) Param[59]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/AGraphLaz/lazarus/lib/x86_64-dragonfly" Info: (lazarus) Param[60]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/ztoolbars/lib/x86_64-dragonfly" Info: (lazarus) Param[61]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zmath/lib/x86_64-dragonfly" Info: (lazarus) Param[62]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontrols/lib/x86_64-dragonfly" Info: (lazarus) Param[63]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zcontainers/lib/x86_64-dragonfly" Info: (lazarus) Param[64]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/lclextensions/lib/x86_64-dragonfly-gtk2" Info: (lazarus) Param[65]="-Fu/usr/local/share/lazarus-2.0.8/components/lazcontrols/lib/x86_64-dragonfly/gtk2" Info: (lazarus) Param[66]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/fpvectorial/lib/x86_64-dragonfly" Info: (lazarus) Param[67]="-Fu/usr/local/share/lazarus-2.0.8/components/cairocanvas/lib/x86_64-dragonfly/gtk2" Info: (lazarus) Param[68]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/anchordocking/lib/x86_64-dragonfly" Info: (lazarus) Param[69]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/components/zebase/lib/x86_64-dragonfly" Info: (lazarus) Param[70]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly/gtk2" Info: (lazarus) Param[71]="-Fu/usr/local/share/lazarus-2.0.8/lcl/units/x86_64-dragonfly" Info: (lazarus) Param[72]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/other/rtl-generics_for_FPC304/lib/x86_64-dragonfly" Info: (lazarus) Param[73]="-Fu/usr/local/share/lazarus-2.0.8/components/lazutils/lib/x86_64-dragonfly" Info: (lazarus) Param[74]="-Fu/usr/local/share/lazarus-2.0.8/packager/units/x86_64-dragonfly" Info: (lazarus) Param[75]="-Fu/construction/cad/zcad/zcad-0.9.8.4/cad_source/" Info: (lazarus) Param[76]="-FU/construction/cad/zcad/zcad-0.9.8.4/lib/x86_64-dragonfly/" Info: (lazarus) Param[77]="-FE/construction/cad/zcad/zcad-0.9.8.4/cad/" Info: (lazarus) Param[78]="-o/construction/cad/zcad/zcad-0.9.8.4/cad/zcad" Info: (lazarus) Param[79]="-dLCL" Info: (lazarus) Param[80]="-dLCLgtk2" Info: (lazarus) Param[81]="zcad.pas" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2020/06/17] for x86_64 Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: DragonFly for x86-64 (3104) Compiling zcad.pas (3104) Compiling ./zcad/gui/forms/uzcfsplash.pas (3104) Compiling ./zcad/uzcsysparams.pas (3104) Compiling ./zcad/uzclog.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/uzclog.pas(387,15) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/uzclog.pas(391,15) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/uzclog.pas(504,150) Warning: (5036) Local variable "CurrentTime" does not seem to be initialized (3104) Compiling ./other/uniqueinstance/uniqueinstanceraw.pas (3104) Compiling ./other/uniqueinstance/uniqueinstancebase.pas (3104) Compiling ./zcad/uzcstrconsts.pas (1010) Writing Resource String Table file: uzcstrconsts.rsj (3104) Compiling ./zcad/uzcsysinfo.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/uzcsysinfo.pas(38,3) Note: (5027) Local variable "i" is assigned but never used (3104) Compiling ./zcad/uzcsysvars.pas (3104) Compiling ./zengine/core/objects/uzepalette.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/uzcsysvars.pas(26,6) Hint: (5023) Unit "gdk2" not used in uzcsysvars (3104) Compiling ./zcad/register/uzcregzscript.pas (3104) Compiling ./zcad/gui/uzctranslations.pas (3104) Compiling ./zcad/gui/odjectinspector/uzcoiregister.pas (3104) Compiling ./zcad/commands/uzccommandsabstract.pas (3104) Compiling ./zengine/zgl/drawers/uzglviewareadata.pas (3104) Compiling ./zengine/core/uzeconsts.pas (3104) Compiling ./zengine/containers/UGDBPoint3DArray.pas (3104) Compiling ./zengine/containers/UGDBTracePropArray.pas (3104) Compiling ./zcad/gui/forms/uzcfcommandline.pas (3104) Compiling ./zcad/gui/uzcguimanager.pas (3104) Compiling ./zengine/usimplegenerics.pas Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized (3104) Compiling ./zengine/core/entities/uzeentity.pas (3104) Compiling ./zengine/core/uzeobjectextender.pas (3104) Compiling ./zengine/core/entities/uzeentityextender.pas (3104) Compiling ./zengine/core/drawings/uzedrawingdef.pas (3104) Compiling ./zengine/zgl/drawers/uzgldrawcontext.pas (3104) Compiling ./zengine/zgl/drawers/uzgldrawerabstract.pas (3104) Compiling ./zengine/zgl/uzgindexsarray.pas (3104) Compiling ./zengine/zgl/uzgvertex3sarray.pas (3104) Compiling ./zengine/zgl/uzgprimitivescreatorabstract.pas (3104) Compiling ./zengine/zgl/uzgprimitivessarray.pas (3104) Compiling ./zengine/containers/uzctnrobjectschunk.pas (3104) Compiling ./zengine/core/objects/uzecamera.pas (3104) Compiling ./zengine/styles/uzestylesdim.pas (3104) Compiling ./zengine/styles/uzestyleslinetypes.pas (3104) Compiling ./zengine/styles/uzestylestexts.pas (3104) Compiling ./zengine/fonts/uzefontmanager.pas (3104) Compiling ./zengine/misc/uzelclintfex.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/misc/uzelclintfex.pas(45,10) Warning: (5033) Function result does not seem to be set /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/misc/uzelclintfex.pas(70,10) Warning: (5033) Function result does not seem to be set (3104) Compiling ./zengine/uzestrconsts.pas (1010) Writing Resource String Table file: uzestrconsts.rsj (3104) Compiling ./zengine/fonts/uzefont.pas (3104) Compiling ./zengine/zgl/uzgprimitivescreator.pas (3104) Compiling ./zengine/zgl/uzgprimitives.pas (3104) Compiling ./zengine/zgl/uzglgeomdata.pas (3104) Compiling ./zengine/zgl/uzglvectorobject.pas (3104) Compiling ./zengine/fonts/uzefontbase.pas (3104) Compiling ./zengine/containers/UGDBNamedObjectsArray.pas Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized (3104) Compiling ./zengine/styles/uzestyleslayers.pas (3104) Compiling ./zengine/styles/uzestylestables.pas Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized (3104) Compiling ./zengine/core/entities/uzeentsubordinated.pas (3104) Compiling ./zengine/core/uzetextpreprocessor.pas Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized (3104) Compiling ./zengine/core/entities/uzeentitiesprop.pas (3104) Compiling ./zengine/containers/UGDBControlPointArray.pas (3104) Compiling ./zengine/fileformats/uzeffdxfsupport.pas (3104) Compiling ./zengine/core/entities/uzeenrepresentation.pas (3104) Compiling ./zengine/zgl/uzglgeometry.pas (3104) Compiling ./zengine/zgl/drawers/uzgldrawergeneral.pas (3104) Compiling ./zengine/geomlib/uzegeomentitiestree.pas (3104) Compiling ./zengine/geomlib/uzgeomentity.pas (3104) Compiling ./zengine/geomlib/uzgeomline3d.pas (3104) Compiling ./zengine/geomlib/uzgeomentity3d.pas (3104) Compiling ./zengine/geomlib/uzgeomproxy.pas (3104) Compiling ./zengine/core/uzeentityfactory.pas Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized (3104) Compiling ./zcad/core/drawings/uzcdrawings.pas (3104) Compiling ./zengine/zgl/drawers/uzglviewareageneral.pas (3104) Compiling ./zengine/containers/UGDBSelectedObjArray.pas (3104) Compiling ./zengine/core/entities/uzeentwithmatrix.pas (3104) Compiling ./zengine/core/objects/uzeentitiestree.pas (3104) Compiling ./zengine/containers/UGDBVisibleOpenArray.pas (3104) Compiling ./zengine/containers/UGDBOpenArrayOfPV.pas (3104) Compiling ./zengine/core/drawings/uzedrawingabstract.pas (3104) Compiling ./zengine/core/entities/uzeentgenericsubentry.pas (3104) Compiling ./zengine/containers/UGDBVisibleTreeArray.pas (3104) Compiling ./zengine/core/objects/uzeroot.pas (3104) Compiling ./zengine/core/entities/uzeentconnected.pas (3104) Compiling ./zengine/zgl/drawers/uzglviewareaabstract.pas (1010) Writing Resource String Table file: uzglviewareageneral.rsj (3104) Compiling ./zengine/core/uzedimblocksregister.pas (3104) Compiling ./zengine/core/utils/uzeutils.pas (3104) Compiling ./zengine/core/drawings/uzedrawingsimple.pas (3104) Compiling ./zengine/core/uzeblockdefsfactory.pas (3104) Compiling ./zengine/core/objects/uzeblockdef.pas Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized (3104) Compiling ./zengine/core/entities/uzeentwithlocalcs.pas (3104) Compiling ./zengine/containers/UGDBOutbound2DIArray.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/core/entities/uzeentwithlocalcs.pas(88,15) Hint: (6048) Inherited call to abstract method ignored (3104) Compiling ./zengine/containers/UGDBObjBlockdefArray.pas (3104) Compiling ./zengine/containers/UGDBNumerator.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/core/drawings/uzedrawingsimple.pas(185,25) Warning: (5033) Function result does not seem to be set (3104) Compiling ./zengine/core/uzeentitiesmanager.pas (3104) Compiling ./zcad/core/drawings/uzcdrawing.pas (3104) Compiling ./zcad/uzcinterface.pas (3104) Compiling ./zcad/core/undostack/zcchangeundocommand.pas (3104) Compiling ./zcad/core/drawings/uzcdrawings.pas (3104) Compiling ./zcad/core/drawings/uzcdrawing.pas (3104) Compiling ./zcad/core/undostack/zcobjectchangeundocommand.pas (3104) Compiling ./zcad/core/drawings/uzcdrawings.pas (3104) Compiling ./zcad/core/drawings/uzcdrawing.pas (3104) Compiling ./zcad/gui/uzcdialogsfiles.pas (3104) Compiling ./zcad/core/drawings/uzcdrawings.pas (3104) Compiling ./zengine/core/objects/uzetrash.pas (3104) Compiling ./zcad/entities/uzcenitiesvariablesextender.pas (3104) Compiling ./zcad/uzcshared.pas (3104) Compiling ./zengine/core/entities/uzeentdevice.pas (3104) Compiling ./zengine/core/entities/uzeentblockinsert.pas (3104) Compiling ./zengine/core/entities/uzeentcomplex.pas (3104) Compiling ./zengine/core/entities/uzeenttext.pas (3104) Compiling ./zengine/core/entities/uzeentabstracttext.pas (3104) Compiling ./zengine/core/entities/uzeentplainwithox.pas (3104) Compiling ./zengine/core/entities/uzeentplain.pas (3104) Compiling ./zengine/fileformats/uzeffdxf.pas (3104) Compiling ./zengine/uzelongprocesssupport.pas (3104) Compiling ./zengine/fileformats/uzeffmanager.pas Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/fileformats/uzeffdxf.pas(515,3) Note: (5027) Local variable "ErrorCode" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/fileformats/uzeffdxf.pas(638,110) Warning: (5036) Local variable "DWGHandle" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/fileformats/uzeffdxf.pas(679,33) Warning: (5036) Local variable "stylehandle" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/fileformats/uzeffdxf.pas(683,46) Warning: (5036) Local variable "BShapeProp" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/fileformats/uzeffdxf.pas(684,56) Warning: (5036) Local variable "shapenumber" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/fileformats/uzeffdxf.pas(1199,105) Warning: (5036) Local variable "bhandle" does not seem to be initialized /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/fileformats/uzeffdxf.pas(1212,3) Note: (5027) Local variable "error" is assigned but never used /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/fileformats/uzeffdxf.pas(1737,74) Warning: (5036) Local variable "intable" does not seem to be initialized (1010) Writing Resource String Table file: uzeffdxf.rsj (3104) Compiling ./zcad/commands/uzccommandsmanager.pas (3104) Compiling ./zcad/gui/uzcctrldynamiccommandmenu.pas (3104) Compiling ./zcad/lclmod/uzcinfoform.pas (3104) Compiling ./zcad/lclmod/uzctreenode.pas (3104) Compiling ./zcad/core/utils/uzcutils.pas (3104) Compiling ./zcad/core/undostack/zcmultiobjectcreateundocommand.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/lclmod/uzctreenode.pas(88,36) Warning: (3057) An inherited method is hidden by "constructor create(TComponent;TTranslateString;TTranslateString);" (3104) Compiling ./zcad/uzccommandlineutil.pas (3104) Compiling ./zcad/gui/odjectinspector/uzcoimultiobjects.pas (3104) Compiling ./zcad/gui/odjectinspector/uzcoimultiproperties.pas Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized (3104) Compiling ./zcad/gui/odjectinspector/uzcoiwrapper.pas Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized (3104) Compiling ./zcad/commands/uzccommandsimpl.pas (3104) Compiling ./zcad/register/uzcreggeneralwiewarea.pas (3104) Compiling ./zengine/zgl/drawers/uzglbackendmanager.pas (3104) Compiling ./zcad/register/uzcregfontmanager.pas (3104) Compiling ./zcad/register/uzcregpaths.pas (3104) Compiling ./zcad/register/uzcregenginefeatures.pas (3104) Compiling ./zengine/core/entities/uzeentdimension.pas (3104) Compiling ./zengine/containers/UGDBXYZWStringArray.pas (3104) Compiling ./zengine/core/entities/uzeentmtext.pas (3104) Compiling ./zengine/core/entities/uzeentline.pas (3104) Compiling ./zengine/core/entities/uzeent3d.pas (3104) Compiling ./zcad/register/uzcreginterface.pas (3104) Compiling ./zcad/gui/odjectinspector/uzcoidecorations.pas (3104) Compiling ./zcad/gui/forms/uzcfsnapeditor.pas (3104) Compiling ./zcad/commands/uzccominterface.pas (3104) Compiling ./zcad/commands/uzccomimport.pas (3104) Compiling ./zengine/core/entities/uzeentcircle.pas (3104) Compiling ./zengine/core/uzehelpobj.pas (3104) Compiling ./zengine/containers/UGDBPolyPoint2DArray.pas (3104) Compiling ./zengine/core/entities/uzeentarc.pas (3104) Compiling ./zcad/gui/forms/uzcfcolors.pas (3104) Compiling ./zcad/gui/forms/uzcfdimstyles.pas (3104) Compiling ./zcad/core/undostack/zcobjectchangeundocommand2.pas (3104) Compiling ./zcad/gui/uzcsuptypededitors.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/gui/uzcsuptypededitors.pas(94,31) Warning: (5033) Function result does not seem to be set (3104) Compiling ./zcad/gui/uzcimagesmanager.pas Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized (3104) Compiling ./zcad/gui/forms/uzcfdimedit.pas (3104) Compiling ./zcad/gui/forms/uzcflineweights.pas (3104) Compiling ./zcad/gui/forms/uzcflinetypes.pas (3104) Compiling ./zcad/gui/uzcgui2linetypes.pas (3104) Compiling ./zcad/gui/uzcinterfacedata.pas (3104) Compiling ./zengine/zgl/drawers/uzgldrawergdi.pas (3104) Compiling ./zengine/zgl/drawers/uzgldrawergeneral2d.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/zgl/drawers/uzgldrawergdi.pas(194,37) Hint: (5057) Local variable "TM" does not seem to be initialized (3104) Compiling ./zcad/gui/forms/uzcflinetypesload.pas (3104) Compiling ./zcad/gui/forms/uzcftextstyles.pas (3104) Compiling ./zcad/commands/uzccombase.pas (3104) Compiling ./zcad/gui/uzcctrlcontextmenu.pas (3104) Compiling ./zengine/core/entities/uzeentpolyline.pas (3104) Compiling ./zengine/containers/UGDBVectorSnapArray.pas (3104) Compiling ./zengine/core/entities/uzeentcurve.pas (3104) Compiling ./zengine/containers/UGDBPolyLine2DArray.pas (3104) Compiling ./zengine/core/entities/uzeentlwpolyline.pas (3104) Compiling ./zengine/containers/UGDBLineWidthArray.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/core/entities/uzeentlwpolyline.pas(624,8) Note: (5027) Local variable "code" is assigned but never used (3104) Compiling ./zcad/commands/uzccommand_selectframe.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/commands/uzccombase.pas(1034,21) Hint: (5060) Function result variable does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized (1010) Writing Resource String Table file: uzccombase.rsj (3104) Compiling ./zcad/gui/forms/uzcflayers.pas (3104) Compiling ./zcad/gui/forms/uzcfselector.pas (3104) Compiling ./zcad/gui/forms/uzcfunits.pas (3104) Compiling ./zcad/gui/forms/uzcfprojecttree.pas (3104) Compiling ./zcad/devicebase/uzcdevicebaseabstract.pas (3104) Compiling ./zcad/gui/forms/uzcfabout.pas (3104) Compiling ./zcad/gui/forms/uzcfhelp.pas (3104) Compiling ./zcad/gui/forms/uzcfhistorywindow.pas (3104) Compiling ./zcad/gui/uzcmainwindow.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/gui/uzcmainwindow.pas(31,16) Warning: (3226) Don't load LINEINFO unit manually, Use the -gl compiler switch instead (3104) Compiling ./zcad/gui/uzcgui2color.pas (3104) Compiling ./zcad/gui/uzcgui2linewidth.pas (3104) Compiling ./zcad/gui/uzctextenteditor.pas (3104) Compiling ./zcad/gui/forms/uzcfsinglelinetexteditor.pas (3104) Compiling ./zcad/gui/uzcctrllayercombobox.pas (3104) Compiling ./zcad/gui/uzcgui2textstyles.pas (3104) Compiling ./zcad/gui/uzcgui2dimstyles.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/gui/uzcmainwindow.pas(1360,87) Warning: (4040) Class types "TPopupMenu" and "TMenuItem" are not related /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/gui/uzcmainwindow.pas(1674,5) Warning: (4040) Class types "TMenuItem" and "TPopupMenu" are not related /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/gui/uzcmainwindow.pas(1842,9) Warning: (4040) Class types "TMenuItem" and "TPopupMenu" are not related /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/gui/uzcmainwindow.pas(1863,83) Warning: (4040) Class types "TPopupMenu" and "TMenuItem" are not related /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/gui/uzcmainwindow.pas(1911,31) Warning: (4040) Class types "TMenuItem" and "TmyPopupMenu" are not related /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/gui/uzcmainwindow.pas(1926,5) Warning: (4040) Class types "TMenuItem" and "TPopupMenu" are not related /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/gui/uzcmainwindow.pas(3148,4) Note: (5025) Local variable "otherinstancerunning" not used (1010) Writing Resource String Table file: uzcmainwindow.rsj (3104) Compiling ./zengine/misc/uzegluinterface.pas (3104) Compiling ./zcad/register/uzcregnavigatorentities.pas (3104) Compiling ./zcad/gui/forms/uzcfnavigatorentities.pas (3104) Compiling ./zcad/gui/forms/uzcnavigatorsnodedesk.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/gui/forms/uzcnavigatorsnodedesk.pas(41,17) Warning: (3057) An inherited method is hidden by "constructor Create(TComponent;TVirtualStringTree;AnsiString);" (1010) Writing Resource String Table file: uzcregnavigatorentities.rsj (3104) Compiling ./zcad/register/uzcregother.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/register/uzcregother.pas(30,3) Note: (5025) Local variable "ptd" not used (3104) Compiling ./zengine/fonts/uzeffshx.pas (3104) Compiling ./zengine/fonts/uzefontshx.pas (3104) Compiling ./zengine/fonts/uzeffttf.pas (3104) Compiling ./zengine/fonts/uzefontttf.pas (3104) Compiling ./zengine/misc/uzebeziersolver.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/misc/uzebeziersolver.pas(251,47) Warning: (5036) Local variable "prevp" does not seem to be initialized (3104) Compiling ./zengine/zgl/drawers/uzgloglstatemanager.pas Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized (3104) Compiling ./autogenerated/aregGDBBaseCamera.pas (3104) Compiling ./autogenerated/aregGDBObjEntityOpenArray.pas (3104) Compiling ./autogenerated/aregGDBPoint3dArray.pas (3104) Compiling ./autogenerated/aregGDBPolyline2DArray.pas (3104) Compiling ./autogenerated/aregGDBLineWidthArray.pas (3104) Compiling ./autogenerated/aregGDBTextStyleArray.pas (3104) Compiling ./autogenerated/aregGDBLayerArray.pas (3104) Compiling ./autogenerated/aregGDBObj3DFace.pas (3104) Compiling ./zengine/core/entities/uzeent3dface.pas (3104) Compiling ./autogenerated/aregGDBObjSolid.pas (3104) Compiling ./zengine/core/entities/uzeentsolid.pas (3104) Compiling ./autogenerated/aregGDBObjCircle.pas (3104) Compiling ./autogenerated/aregGDBObjArc.pas (3104) Compiling ./autogenerated/aregGDBObjEllipse.pas (3104) Compiling ./zengine/core/entities/uzeentellipse.pas (3104) Compiling ./autogenerated/aregGDBObjBlockdef.pas (3104) Compiling ./autogenerated/aregGDBObjBlockdefArray.pas (3104) Compiling ./autogenerated/aregGDBObjGenericDimension.pas (3104) Compiling ./zengine/core/entities/uzeentdimensiongeneric.pas (3104) Compiling ./zengine/core/entities/uzeentdimradial.pas (3104) Compiling ./zengine/core/entities/uzeentdimdiametric.pas (3104) Compiling ./zengine/core/entities/uzeentdimrotated.pas (3104) Compiling ./zengine/core/entities/uzeentdimaligned.pas (3104) Compiling ./zengine/core/entities/uzeentpoint.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/core/entities/uzeentpoint.pas(114,8) Note: (5027) Local variable "code" is assigned but never used (3104) Compiling ./autogenerated/aregGDBObjBlockInsert.pas (3104) Compiling ./autogenerated/aregGDBObjDevice.pas (3104) Compiling ./autogenerated/aregGDBObjLine.pas (3104) Compiling ./autogenerated/aregGDBObjLWPolyline.pas (3104) Compiling ./autogenerated/aregGDBObjText.pas (3104) Compiling ./autogenerated/aregGDBObjMText.pas (3104) Compiling ./autogenerated/aregGDBObjPoint.pas (3104) Compiling ./autogenerated/aregGDBObjPolyline.pas (3104) Compiling ./autogenerated/aregGDBObjSpline.pas (3104) Compiling ./zengine/core/entities/uzeentspline.pas (3104) Compiling ./autogenerated/aregGDBObjRoot.pas (3104) Compiling ./autogenerated/aregGDBObjCamera.pas (3104) Compiling ./autogenerated/aregDbBaseObject.pas (3104) Compiling ./autogenerated/aregDeviceDbBaseObject.pas (3104) Compiling ./zcad/devicebase/uzcdevicebase.pas (3104) Compiling ./other/csvdocument.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/devicebase/uzcdevicebase.pas(98,61) Warning: (4066) Arithmetic "+" on untyped pointer is unportable to {$T+}, suggest typecast /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zcad/devicebase/uzcdevicebase.pas(118,56) Warning: (4066) Arithmetic "+" on untyped pointer is unportable to {$T+}, suggest typecast (3104) Compiling ./autogenerated/aregElDeviceBaseObject.pas (3104) Compiling ./autogenerated/aregCableDeviceBaseObject.pas (3104) Compiling ./autogenerated/aregTZCADDrawingsManager.pas (3104) Compiling ./zcad/commands/uzccommand_ondrawinged.pas (3104) Compiling ./zengine/zgl/drawers/uzgldrawercanvas.pas (3104) Compiling ./zcad/commands/uzccomdrawdase.pas (3104) Compiling ./zcad/commands/uzccommand_stretch.pas (3104) Compiling ./zcad/commands/uzccommand_selsim.pas (3104) Compiling ./zengine/containers/uzctnrvectorobjid.pas (3104) Compiling ./zengine/containers/uzctnrvectorgdbdouble.pas (3104) Compiling ./zengine/containers/uzctnrvectorgdblineweight.pas (3104) Compiling ./zengine/containers/uzctnrvectorgdbpalettecolor.pas (3104) Compiling ./zcad/commands/uzccomdraw.pas (3104) Compiling ./zcad/core/undostack/zcmultiobjectchangeundocommand.pas (3104) Compiling ./zengine/core/entities/uzeenttable.pas (3104) Compiling ./zengine/containers/UGDBTable.pas Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized Hint: (5057) Local variable "position" does not seem to be initialized (3104) Compiling ./zcad/commands/uzccommand_print.pas (3104) Compiling ./zengine/misc/uzeiopalette.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/misc/uzeiopalette.pas(52,5) Note: (5027) Local variable "code" is assigned but never used (3104) Compiling ./zcad/commands/uzccomexample.pas (3104) Compiling ./zcad/commands/uzccominteractivemanipulators.pas (3104) Compiling ./zcad/electrotech/uzcentcable.pas (3104) Compiling ./zcad/velec/uzventsuperline.pas (3104) Compiling ./zcad/commands/uzccomobjectinspector.pas (3104) Compiling ./zcad/uzcplugins.pas (3104) Compiling ./zcad/core/uzctextpreprocessorimpl.pas (3104) Compiling ./zcad/entities/uzcvariablesutils.pas (3104) Compiling ./zcad/entities/uzcregisterenitiesfeatures.pas (3104) Compiling ./zcad/core/devices.pas (3104) Compiling ./zcad/commands/uzccomdb.pas (3104) Compiling ./zcad/electrotech/uzcentnet.pas (3104) Compiling ./zengine/containers/UGDBGraf.pas (1010) Writing Resource String Table file: uzcentnet.rsj (3104) Compiling ./zcad/entities/uzcregisterenitiesextenders.pas (3104) Compiling ./zcad/gui/odjectinspector/uzcoiregistermultiproperties.pas (3104) Compiling ./zcad/gui/odjectinspector/uzcoimultipropertiesutil.pas (3104) Compiling ./zcad/electrotech/uzcentelleader.pas (3104) Compiling ./zcad/entities/uzclibraryblocksregister.pas (3104) Compiling ./zengine/zgl/drawers/uzglviewareaogl.pas (3104) Compiling ./zengine/zgl/drawers/uzgldrawerogl.pas (3104) Compiling openglcontext.pas (3104) Compiling glgtkglxcontext.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/glgtkglxcontext.pas(145,20) Hint: (5028) Local type "GLXPixmap" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/glgtkglxcontext.pas(148,22) Hint: (5028) Local type "GLXDrawable" is not used /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/zgl/drawers/uzglviewareaogl.pas(249,14) Warning: (4040) Class types "TOGLWnd" and "TCADControl" are not related /construction/cad/zcad/zcad-0.9.8.4/cad_source/./zengine/zgl/drawers/uzglviewareaogl.pas(257,20) Warning: (4040) Class types "TCADControl" and "TOGLWnd" are not related (3104) Compiling ./zengine/zgl/drawers/uzglviewareagdi.pas (3104) Compiling ./zengine/zgl/drawers/uzglviewareacanvasgeneral.pas (3104) Compiling ./zengine/zgl/drawers/uzglviewareacanvas.pas (3104) Compiling ./zcad/commands/uzccomdbgappexplorer.pas (3104) Compiling ./other/appexplorefrm.pas /construction/cad/zcad/zcad-0.9.8.4/cad_source/zcad.pas(199,15) Warning: (5044) Symbol "MainFormOnTaskBar" is not portable (1010) Writing Resource String Table file: zcad.rsj (9022) Compiling resource /construction/cad/zcad/zcad-0.9.8.4/lib/x86_64-dragonfly/zcad.or (9015) Linking /construction/cad/zcad/zcad-0.9.8.4/cad/zcad (1008) 94743 lines compiled, 62.0 sec (1021) 28 warning(s) issued (1022) 74 hint(s) issued (1023) 8 note(s) issued SUCCEEDED 00:02:20 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for zcad-gtk2-0.9.8.4_5 ===> Generating temporary packing list install -s -m 555 /construction/cad/zcad/zcad-0.9.8.4/cad/zcad /construction/cad/zcad/stage/usr/local/zcad cd /construction/cad/zcad/zcad-0.9.8.4/cad && /bin/sh -c '(/usr/bin/find -Ed $1 $3 | /usr/bin/cpio -dumpl $2 >/dev/null 2>&1) && /usr/bin/find -Ed $1 $3 \( -type d -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 755 "$@"'\'' . {} + -o -type f -exec /bin/sh -c '\''cd '\''$2'\'' && chmod 0644 "$@"'\'' . {} + \)' COPYTREE_SHARE "autosave components fonts images languages log menu plugins rtl sample template" /construction/cad/zcad/stage/usr/local/zcad install -m 0644 /construction/cad/zcad/zcad-0.9.8.4/cad_source/userguide/UserGuide.odt /construction/cad/zcad/zcad-0.9.8.4/cad/UserGuide.pdf /construction/cad/zcad/stage/usr/local/share/doc/zcad ====> Compressing man pages (compress-man) ====> Running Q/A tests (stage-qa) Error: /usr/local/zcad/zcad is linked to /usr/local/lib/libX11.so.6 from x11/libX11 but it is not declared as a dependency Warning: you need USE_XORG+=x11 Error: /usr/local/zcad/zcad is linked to /usr/local/lib/libcairo.so.2 from graphics/cairo but it is not declared as a dependency Warning: you need USE_GNOME+=cairo Error: /usr/local/zcad/zcad is linked to /usr/local/lib/libGL.so.1 from graphics/mesa-libs but it is not declared as a dependency Warning: you need USE_GL+=gl Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks SUCCEEDED 00:00:02 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for zcad-gtk2-0.9.8.4_5 file sizes/checksums [200]: 0% file sizes/checksums [200]: 50% file sizes/checksums [200]: 100% packing files [200]: 0% packing files [200]: 50% packing files [200]: 100% packing directories [0]: 0% packing directories [0]: 100% SUCCEEDED 00:00:51 TOTAL TIME 00:05:01