------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gettext-runtime-0.20.2.txz Installing /packages/All/gmake-4.3_2.txz Installing /packages/All/libXau-1.0.9.txz Installing /packages/All/libxml2-2.9.10.txz Installing /packages/All/libpthread-stubs-0.4.txz Installing /packages/All/xorgproto-2020.1.txz Installing /packages/All/libXdmcp-1.1.3.txz Installing /packages/All/libxcb-1.13.1.txz Installing /packages/All/libX11-1.6.9_1,1.txz Installing /packages/All/libICE-1.0.10,1.txz Installing /packages/All/libSM-1.2.3,1.txz Installing /packages/All/libXt-1.2.0,1.txz Installing /packages/All/libXext-1.3.4,1.txz Installing /packages/All/libXmu-1.1.3,1.txz Installing /packages/All/libXpm-3.5.13.txz Installing /packages/All/perl5-5.30.3.txz ===== Message from perl5-5.30.3: -- The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. Installing /packages/All/freetype2-2.10.2.txz ===== Message from freetype2-2.10.2: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). Installing /packages/All/expat-2.2.8.txz Installing /packages/All/fontconfig-2.13.92_2,1.txz Running fc-cache to build fontconfig cache... Font directories: /usr/local/share/fonts /usr/local/lib/X11/fonts /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded Installing /packages/All/png-1.6.37.txz Installing /packages/All/jpeg-turbo-2.0.4.txz Installing /packages/All/libXaw-1.0.13_3,2.txz Installing /packages/All/xbitmaps-1.1.2.txz Installing /packages/All/libXrender-0.9.10_2.txz Installing /packages/All/libXft-2.3.3.txz Installing /packages/All/open-motif-2.3.8_1.txz Installing /packages/All/dbus-1.12.16.txz ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. Installing /packages/All/giflib-5.2.1.txz Installing /packages/All/gmp-6.2.0.txz Installing /packages/All/nettle-3.6.txz Installing /packages/All/libtasn1-4.16.0.txz Installing /packages/All/libunistring-0.9.10_1.txz Installing /packages/All/libidn2-2.3.0_1.txz Installing /packages/All/libffi-3.2.1_3.txz Installing /packages/All/ca_root_nss-3.53.txz ===== Message from ca_root_nss-3.53: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/p11-kit-0.23.20.txz Installing /packages/All/tpm-emulator-0.7.4_2.txz ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. Installing /packages/All/openssl-1.1.1g,1.txz Installing /packages/All/trousers-0.3.14_2.txz ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. ===== Message from trousers-0.3.14_2: -- To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Installing /packages/All/gnutls-3.6.14.txz Installing /packages/All/jbigkit-2.1_1.txz Installing /packages/All/tiff-4.1.0.txz Installing /packages/All/lcms2-2.10.txz Installing /packages/All/fribidi-0.19.7.txz Installing /packages/All/webp-1.1.0.txz Installing /packages/All/libgd-2.3.0,1.txz Installing /packages/All/libotf-0.9.16.txz Installing /packages/All/m17n-db-1.8.0.txz Installing /packages/All/m17n-lib-1.8.0_2.txz Installing /packages/All/libltdl-2.4.6.txz Installing /packages/All/fftw3-3.3.8_6.txz Installing /packages/All/openjpeg-2.3.1.txz Installing /packages/All/pcre-8.44.txz Installing /packages/All/libiconv-1.16.txz Installing /packages/All/ncurses-6.1.20190525.txz Installing /packages/All/readline-8.0.4.txz Installing /packages/All/python37-3.7.7_1.txz ===== Message from python37-3.7.7_1: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py37-gdbm databases/py-gdbm@py37 py37-sqlite3 databases/py-sqlite3@py37 py37-tkinter x11-toolkits/py-tkinter@py37 Installing /packages/All/glib-2.56.3_7,1.txz No schema files found: doing nothing. Installing /packages/All/liblqr-1-0.4.2.txz ===== Message from liblqr-1-0.4.2: -- NOTE: In order to compile examples for liblqr, you will also need pngwriter port (/xports/graphics/pngwriter). Examples are located in /usr/local/share/examples/liblqr-1 Installing /packages/All/graphite2-1.3.14.txz Installing /packages/All/harfbuzz-2.6.7.txz Installing /packages/All/libraqm-0.6.0.txz Installing /packages/All/libraw-0.19.5.txz Installing /packages/All/libwmf-0.2.8.4_15.txz ===== Message from libwmf-0.2.8.4_15: -- ===> NOTICE: The libwmf port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/wayland-1.18.0.txz Installing /packages/All/pciids-20200529.txz Installing /packages/All/libpciaccess-0.16.txz Installing /packages/All/libdrm-2.4.101.txz Installing /packages/All/libunwind-20200331.txz Installing /packages/All/libelf-0.8.13_3.txz Installing /packages/All/libXfixes-5.0.3_2.txz Installing /packages/All/libXdamage-1.1.5.txz Installing /packages/All/libxshmfence-1.3.txz Installing /packages/All/libXxf86vm-1.1.4_3.txz Installing /packages/All/libXrandr-1.5.2.txz Installing /packages/All/mesa-libs-19.0.8_1.txz Installing /packages/All/pixman-0.40.0.txz Installing /packages/All/cairo-1.16.0,2.txz Installing /packages/All/shared-mime-info-1.10_2.txz Installing /packages/All/gdk-pixbuf2-2.40.0.txz Installing /packages/All/libgsf-1.14.46.txz Installing /packages/All/libcroco-0.6.13.txz Installing /packages/All/libfontenc-1.1.4.txz Installing /packages/All/mkfontscale-1.2.1.txz Installing /packages/All/font-bh-ttf-1.0.3_4.txz Installing /packages/All/font-misc-meltho-1.0.3_4.txz Installing /packages/All/font-misc-ethiopic-1.0.3_4.txz Installing /packages/All/encodings-1.0.5,1.txz Installing /packages/All/dejavu-2.37_1.txz ===== Message from dejavu-2.37_1: -- Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Installing /packages/All/xorg-fonts-truetype-7.7_1.txz Installing /packages/All/pango-1.42.4_3.txz Installing /packages/All/librsvg2-2.40.21.txz Installing /packages/All/gsfonts-8.11_8.txz Installing /packages/All/pkgconf-1.6.3,1.txz Installing /packages/All/libidn-1.35.txz Installing /packages/All/jbig2dec-0.18.txz Installing /packages/All/libpaper-1.1.24.4.txz Installing /packages/All/libdaemon-0.14_1.txz Installing /packages/All/dbus-glib-0.110.txz Installing /packages/All/gdbm-1.18.1_1.txz Installing /packages/All/gobject-introspection-1.56.1,1.txz Installing /packages/All/gnome_subr-1.0.txz Installing /packages/All/avahi-app-0.7_3.txz ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. Installing /packages/All/cups-2.2.13.txz ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. Installing /packages/All/poppler-data-0.4.9_3.txz Installing /packages/All/ghostscript9-agpl-base-9.52_5.txz ===== Message from ghostscript9-agpl-base-9.52_5: -- This package installs a script named dvipdf that depends on dvips. If you want to use this script you need to install print/tex-dvipsk. Installing /packages/All/ghostscript9-agpl-x11-9.52.txz Installing /packages/All/ImageMagick7-7.0.10.6.txz Installing /packages/All/boehm-gc-8.0.4_1.txz Installing /packages/All/boehm-gc-threaded-8.0.4_1.txz Installing /packages/All/mailutils-3.9.txz Installing /packages/All/atk-2.36.0.txz Installing /packages/All/nspr-4.25.txz Installing /packages/All/icu-67.1,1.txz Installing /packages/All/spidermonkey60-60.9.0_3.txz ===== Message from spidermonkey60-60.9.0_3: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/polkit-0.116.txz ===> Creating groups. Creating group 'polkitd' with gid '565'. ===> Creating users Creating user 'polkitd' with uid '565'. Installing /packages/All/dconf-0.28.0.txz Installing /packages/All/hicolor-icon-theme-0.17.txz Installing /packages/All/libXinerama-1.1.4_2,1.txz Installing /packages/All/libXi-1.7.10,1.txz Installing /packages/All/libXcursor-1.2.0.txz Installing /packages/All/libXcomposite-0.4.5,1.txz Installing /packages/All/gtk-update-icon-cache-2.24.32.txz Installing /packages/All/gtk2-2.24.32.txz Installing /packages/All/libIDL-0.8.14_4.txz Installing /packages/All/ORBit2-2.14.19_2.txz Installing /packages/All/gconf2-3.2.6_5.txz Installing /packages/All/libepoxy-1.5.4.txz Installing /packages/All/xkeyboard-config-2.29.txz Installing /packages/All/libxkbcommon-0.10.0_2.txz ===== Message from libxkbcommon-0.10.0_2: -- If arrow keys don't work under X11 switch to legacy rules e.g., For sh/bash/ksh/zsh run and (optionally) add into ~/.profile: export XKB_DEFAULT_RULES=xorg For csh/tcsh run and (optionally) add into ~/.login: setenv XKB_DEFAULT_RULES xorg Installing /packages/All/libXtst-1.2.3_2.txz Installing /packages/All/at-spi2-core-2.36.0.txz Installing /packages/All/at-spi2-atk-2.34.2.txz Installing /packages/All/sqlite3-3.32.2,1.txz Installing /packages/All/libXScrnSaver-1.2.3_2.txz Installing /packages/All/argyllcms-1.9.2_5.txz Installing /packages/All/colord-1.3.5.txz ===> Creating groups. Creating group 'colord' with gid '970'. ===> Creating users Creating user 'colord' with uid '970'. Installing /packages/All/adwaita-icon-theme-3.28.0.txz Installing /packages/All/wayland-protocols-1.20.txz Installing /packages/All/gtk3-3.24.10_1.txz Installing /packages/All/coreutils-8.31.txz Installing /packages/All/desktop-file-utils-0.24.txz Installing /packages/All/emacs-26.3_4,3.txz Installing /packages/All/verilog-mode.el-emacs26-801_8.txz ===== Message from verilog-mode.el-emacs26-801_8: -- To use verilog-mode features in Emacs/XEmacs, add the following lines to your Emacs configuration file (usually ~/.emacs): (autoload 'verilog-mode "verilog-mode" "Verilog mode" t ) (add-to-list 'auto-mode-alist '("\\.[ds]?v\\'" . verilog-mode)) -- ===> NOTICE: The verilog-mode.el-emacs26 port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port SUCCEEDED 00:02:09 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- ===> NOTICE: The dinotrace port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> NOTICE: The dinotrace port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by dinotrace-emacs26-9.4c_9 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> NOTICE: The dinotrace port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by dinotrace-emacs26-9.4c_9 for building => SHA256 Checksum OK for dinotrace-9.4c.tgz. SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> NOTICE: The dinotrace port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by dinotrace-emacs26-9.4c_9 for building ===> Extracting for dinotrace-emacs26-9.4c_9 => SHA256 Checksum OK for dinotrace-9.4c.tgz. Extracted Memory Use: 2.61M SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for dinotrace-emacs26-9.4c_9 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> dinotrace-emacs26-9.4c_9 depends on package: gmake>=4.3 - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/sm.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/ice.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/xmu.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/xt.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/xpm.pc - found ===> dinotrace-emacs26-9.4c_9 depends on package: perl5>=5.30.r1<5.31 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- ===> dinotrace-emacs26-9.4c_9 depends on shared library: libXm.so.4 - found (/usr/local/lib/libXm.so.4) SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> dinotrace-emacs26-9.4c_9 depends on package: gmake>=4.3 - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/sm.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/ice.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/xmu.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/xt.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/xpm.pc - found ===> dinotrace-emacs26-9.4c_9 depends on package: perl5>=5.30.r1<5.31 - found ===> dinotrace-emacs26-9.4c_9 depends on shared library: libXm.so.4 - found (/usr/local/lib/libXm.so.4) ===> Configuring for dinotrace-emacs26-9.4c_9 configure: loading site script /xports/Templates/config.site You may want to look in bin/ for a precompiled executable checking for gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for a BSD-compatible install... /usr/bin/install -c checking for perl... (cached) /usr/local/bin/perl checking how to run the C preprocessor... cpp checking for X... libraries /usr/local/lib, headers /usr/local/include checking whether -R must be followed by a space... no checking for gethostbyname... (cached) yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking for X... libraries /usr/local/lib, headers /usr/local/include checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for fcntl.h... (cached) yes checking for unistd.h... (cached) yes checking for sys/file.h... (cached) yes checking for sys/time.h... (cached) yes checking for sys/un.h... (cached) yes checking for math.h... (cached) yes checking for size_t... (cached) yes checking for uint_t... no checking for ulong_t... no checking for size_t... (cached) yes checking whether struct tm is in sys/time.h or time.h... time.h checking for inline... inline checking whether byte ordering is bigendian... no checking return type of signal handlers... void checking for gethostname... (cached) yes checking for strdup... (cached) yes checking for strcasecmp... (cached) yes configure: creating ./config.status config.status: creating Makefile config.status: WARNING: 'Makefile.in' seems to ignore the --datarootdir setting config.status: creating src/Makefile config.status: creating src/config.h You may want to look in bin/ for a precompiled executable else, now type 'make' SUCCEEDED 00:00:04 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for dinotrace-emacs26-9.4c_9 gmake[1]: Entering directory '/construction/cad/dinotrace/dinotrace-9.4c' mkdir -p obj_dir making dinotrace in obj_dir cd obj_dir && gmake -f /construction/cad/dinotrace/dinotrace-9.4c/src/Makefile dinotrace gmake[2]: Entering directory '/construction/cad/dinotrace/dinotrace-9.4c/obj_dir' cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_binary.c -o dt_binary.o cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_config.c -o dt_config.o cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_cursor.c -o dt_cursor.o cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_customize.c -o dt_customize.o cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_dispmgr.c -o dt_dispmgr.o cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_draw.c -o dt_draw.o /usr/local/bin/perl /construction/cad/dinotrace/dinotrace-9.4c/src/dinodoc.pl <../dinotrace.txt >dinodoc.h cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_grid.c -o dt_grid.o cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_print.c -o dt_print.o cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_signal.c -o dt_signal.o cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_util.c -o dt_util.o /construction/cad/dinotrace/dinotrace-9.4c/src/dt_config.c: In function 'config_update_filenames': /construction/cad/dinotrace/dinotrace-9.4c/src/dt_config.c:1345:31: warning: comparison between pointer and zero character constant [-Wpointer-compare] if (trace->dfile.filename != '\0') { ^~ /construction/cad/dinotrace/dinotrace-9.4c/src/dt_config.c:1345:9: note: did you mean to dereference the pointer? if (trace->dfile.filename != '\0') { ^ /construction/cad/dinotrace/dinotrace-9.4c/src/dt_config.c:1352:31: warning: comparison between pointer and zero character constant [-Wpointer-compare] if (trace->dfile.filename != '\0') { ^~ /construction/cad/dinotrace/dinotrace-9.4c/src/dt_config.c:1352:9: note: did you mean to dereference the pointer? if (trace->dfile.filename != '\0') { ^ cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_window.c -o dt_window.o cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_value.c -o dt_value.o cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_verilog.c -o dt_verilog.o cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_socket.c -o dt_socket.o /usr/local/bin/perl /construction/cad/dinotrace/dinotrace-9.4c/src/dist_date.pl cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_icon.c -o dt_icon.o cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_ascii.c -o dt_ascii.o cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dt_file.c -o dt_file.o cc -I. -pipe -O2 -fno-strict-aliasing -I/usr/local/include -DHAVE_CONFIG_H -c /construction/cad/dinotrace/dinotrace-9.4c/src/dinotrace.c -o dinotrace.o cc -o dinotrace dt_binary.o dt_config.o dt_cursor.o dt_customize.o dt_dispmgr.o dt_draw.o dt_file.o dt_grid.o dt_print.o dt_signal.o dt_util.o dt_window.o dt_value.o dt_verilog.o dt_socket.o dinotrace.o dt_icon.o dt_ascii.o -L/usr/local/lib -R/usr/local/lib -lXm -lXt -lX11 -lm -lSM -lICE gmake[2]: Leaving directory '/construction/cad/dinotrace/dinotrace-9.4c/obj_dir' (cp obj_dir/dinotrace ./dinotrace >/dev/null 2>&1\ || cp obj_dir/dinotrace.exe ./dinotrace.exe >/dev/null 2>&1) (cp obj_dir/dinotrace bin/dinotrace- >/dev/null 2>&1\ || cp obj_dir/dinotrace.exe bin/dinotrace-.exe >/dev/null 2>&1) gmake[1]: Leaving directory '/construction/cad/dinotrace/dinotrace-9.4c' SUCCEEDED 00:00:04 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- ===> dinotrace-emacs26-9.4c_9 depends on package: verilog-mode.el-emacs26>0 - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/bin/emacs-26.3 - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/sm.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/ice.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/xmu.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/xt.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/xpm.pc - found ===> dinotrace-emacs26-9.4c_9 depends on executable: indexinfo - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for dinotrace-emacs26-9.4c_9 ===> dinotrace-emacs26-9.4c_9 depends on package: verilog-mode.el-emacs26>0 - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/bin/emacs-26.3 - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/sm.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/ice.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/xmu.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/xt.pc - found ===> dinotrace-emacs26-9.4c_9 depends on file: /usr/local/libdata/pkgconfig/xpm.pc - found ===> dinotrace-emacs26-9.4c_9 depends on executable: indexinfo - found ===> Generating temporary packing list gmake[1]: Entering directory '/construction/cad/dinotrace/dinotrace-9.4c' making dinotrace in obj_dir cd obj_dir && gmake -f /construction/cad/dinotrace/dinotrace-9.4c/src/Makefile dinotrace gmake[2]: Entering directory '/construction/cad/dinotrace/dinotrace-9.4c/obj_dir' gmake[2]: 'dinotrace' is up to date. gmake[2]: Leaving directory '/construction/cad/dinotrace/dinotrace-9.4c/obj_dir' (cp obj_dir/dinotrace ./dinotrace >/dev/null 2>&1\ || cp obj_dir/dinotrace.exe ./dinotrace.exe >/dev/null 2>&1) (cp obj_dir/dinotrace bin/dinotrace- >/dev/null 2>&1\ || cp obj_dir/dinotrace.exe bin/dinotrace-.exe >/dev/null 2>&1) /bin/sh ./mkinstalldirs /construction/cad/dinotrace/stage/usr/local/bin /construction/cad/dinotrace/stage/usr/local/share/info for i in *.info*; do \ install -m 0644 $i /construction/cad/dinotrace/stage/usr/local/share/info/$i; \ done for p in dinotrace; do \ install -s -m 555 $p /construction/cad/dinotrace/stage/usr/local/bin/$p; \ done *** Lisp files not installed, you may want to *** cd lisp ; make install Type 'setenv DISPLAY :0.0' then 'dinotrace' to test. gmake[1]: Leaving directory '/construction/cad/dinotrace/dinotrace-9.4c' install -m 0644 /construction/cad/dinotrace/dinotrace-9.4c/lisp/dinotrace.el /construction/cad/dinotrace/stage/usr/local/share/emacs/site-lisp install -m 0644 /construction/cad/dinotrace/dinotrace-9.4c/lisp/sim-log.el /construction/cad/dinotrace/stage/usr/local/share/emacs/site-lisp ====> Compressing man pages (compress-man) ====> Running Q/A tests (stage-qa) Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for dinotrace-emacs26-9.4c_9 file sizes/checksums [4]: 0% file sizes/checksums [4]: 100% packing files [4]: 0% packing files [4]: 100% packing directories [0]: 0% packing directories [0]: 100% SUCCEEDED 00:00:02 TOTAL TIME 00:02:21