------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/icu-67.1,1.txz Installing /packages/All/boost-libs-1.72.0_2.txz ===== Message from boost-libs-1.72.0_2: -- You have built the Boost library with thread support. Don't forget to add -pthread to your linker options when linking your code. Installing /packages/All/cereal-1.3.0.txz Installing /packages/All/eigen-3.3.7.txz Installing /packages/All/googletest-1.10.0_1.txz Installing /packages/All/expat-2.2.8.txz Installing /packages/All/freetype2-2.10.2.txz ===== Message from freetype2-2.10.2: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gettext-runtime-0.21.txz Installing /packages/All/fontconfig-2.13.92_2,1.txz Running fc-cache to build fontconfig cache... Font directories: /usr/local/share/fonts /usr/local/lib/X11/fonts /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded Installing /packages/All/jbigkit-2.1_1.txz Installing /packages/All/png-1.6.37.txz Installing /packages/All/jpeg-turbo-2.0.4.txz Installing /packages/All/tiff-4.1.0.txz Installing /packages/All/pcre-8.44.txz Installing /packages/All/libffi-3.3_1.txz Installing /packages/All/libxml2-2.9.10.txz Installing /packages/All/libiconv-1.16.txz Installing /packages/All/ncurses-6.2.20200831.txz Installing /packages/All/readline-8.0.4.txz Installing /packages/All/openssl-1.1.1g,1.txz Installing /packages/All/python37-3.7.9.txz ===== Message from python37-3.7.9: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py37-gdbm databases/py-gdbm@py37 py37-sqlite3 databases/py-sqlite3@py37 py37-tkinter x11-toolkits/py-tkinter@py37 Installing /packages/All/glib-2.56.3_9,1.txz No schema files found: doing nothing. Installing /packages/All/shared-mime-info-2.0.txz Installing /packages/All/libpthread-stubs-0.4.txz Installing /packages/All/libXau-1.0.9.txz Installing /packages/All/xorgproto-2020.1.txz Installing /packages/All/libXdmcp-1.1.3.txz Installing /packages/All/libxcb-1.13.1.txz Installing /packages/All/libX11-1.6.12,1.txz Installing /packages/All/gdk-pixbuf2-2.40.0.txz Installing /packages/All/libnotify-0.7.8.txz Installing /packages/All/libgpg-error-1.39.txz Installing /packages/All/libgcrypt-1.8.5.txz Installing /packages/All/libsecret-0.18.6_1.txz Installing /packages/All/libedit-3.1.20191231,1.txz Installing /packages/All/sqlite3-3.33.0,1.txz Installing /packages/All/gmp-6.2.0.txz Installing /packages/All/nettle-3.6.txz Installing /packages/All/libtasn1-4.16.0.txz Installing /packages/All/libunistring-0.9.10_1.txz Installing /packages/All/libidn2-2.3.0_1.txz Installing /packages/All/ca_root_nss-3.56.txz ===== Message from ca_root_nss-3.56: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/bash-5.0.18_3.txz Installing /packages/All/bash-completion-2.11,2.txz ===== Message from bash-completion-2.11,2: -- To enable the bash completion library, add the following to your .bashrc file: [[ $PS1 && -f /usr/local/share/bash-completion/bash_completion.sh ]] && \ source /usr/local/share/bash-completion/bash_completion.sh See /usr/local/share/doc/bash-completion/README.md for more information. Installing /packages/All/p11-kit-0.23.21.txz Installing /packages/All/tpm-emulator-0.7.4_2.txz ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. Installing /packages/All/trousers-0.3.14_3.txz ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. ===== Message from trousers-0.3.14_3: -- To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account Installing /packages/All/gnutls-3.6.15.txz Installing /packages/All/libICE-1.0.10,1.txz Installing /packages/All/libSM-1.2.3,1.txz Installing /packages/All/dbus-1.12.20.txz ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. Installing /packages/All/libproxy-0.4.15.txz Installing /packages/All/gsettings-desktop-schemas-3.28.1.txz Installing /packages/All/glib-networking-2.56.1_3.txz Installing /packages/All/libsoup-2.62.3.txz Installing /packages/All/libmspack-0.10.1.txz Installing /packages/All/perl5-5.32.0.txz Installing /packages/All/hunspell-1.7.0_2.txz Installing /packages/All/enchant2-2.2.3_4.txz Installing /packages/All/fribidi-0.19.7.txz Installing /packages/All/giflib-5.2.1.txz Installing /packages/All/webp-1.1.0.txz Installing /packages/All/hyphen-2.8.8.txz Installing /packages/All/lcms2-2.11_1.txz Installing /packages/All/openjpeg-2.3.1.txz Installing /packages/All/graphite2-1.3.14.txz Installing /packages/All/harfbuzz-2.7.2.txz Installing /packages/All/harfbuzz-icu-2.7.2.txz Installing /packages/All/brotli-1.0.9,1.txz Installing /packages/All/woff2-1.0.2_4.txz Installing /packages/All/wayland-1.18.0.txz Installing /packages/All/xkeyboard-config-2.30.txz Installing /packages/All/libxkbcommon-0.10.0_2.txz ===== Message from libxkbcommon-0.10.0_2: -- If arrow keys don't work under X11 switch to legacy rules e.g., For sh/bash/ksh/zsh run and (optionally) add into ~/.profile: export XKB_DEFAULT_RULES=xorg For csh/tcsh run and (optionally) add into ~/.login: setenv XKB_DEFAULT_RULES xorg Installing /packages/All/pciids-20200819.txz Installing /packages/All/libpciaccess-0.16.txz Installing /packages/All/libdrm-2.4.101.txz Installing /packages/All/libXfixes-5.0.3_2.txz Installing /packages/All/libXdamage-1.1.5.txz Installing /packages/All/libXext-1.3.4,1.txz Installing /packages/All/libxshmfence-1.3.txz Installing /packages/All/libXxf86vm-1.1.4_3.txz Installing /packages/All/libXrender-0.9.10_2.txz Installing /packages/All/libXrandr-1.5.2.txz Installing /packages/All/mesa-libs-19.0.8_2.txz Installing /packages/All/libwpe-1.4.0.1.txz Installing /packages/All/wpebackend-fdo-1.4.1.txz Installing /packages/All/atk-2.36.0.txz Installing /packages/All/pixman-0.40.0_1.txz Installing /packages/All/cairo-1.16.0,2.txz Installing /packages/All/libepoxy-1.5.4.txz Installing /packages/All/libXi-1.7.10,1.txz Installing /packages/All/libXtst-1.2.3_2.txz Installing /packages/All/at-spi2-core-2.36.0.txz Installing /packages/All/at-spi2-atk-2.34.2.txz Installing /packages/All/nspr-4.28.txz Installing /packages/All/spidermonkey60-60.9.0_4.txz ===== Message from spidermonkey60-60.9.0_4: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: Uses Python 2.7 which is EOLed upstream. It is scheduled to be removed on or after 2020-12-31. Installing /packages/All/polkit-0.116.txz ===> Creating groups. Creating group 'polkitd' with gid '565'. ===> Creating users Creating user 'polkitd' with uid '565'. Installing /packages/All/libXinerama-1.1.4_2,1.txz Installing /packages/All/libXScrnSaver-1.2.3_2.txz Installing /packages/All/argyllcms-1.9.2_5.txz Installing /packages/All/colord-1.3.5.txz ===> Creating groups. Creating group 'colord' with gid '970'. ===> Creating users Creating user 'colord' with uid '970'. Installing /packages/All/libdaemon-0.14_1.txz Installing /packages/All/dbus-glib-0.110.txz Installing /packages/All/gdbm-1.18.1_1.txz Installing /packages/All/gobject-introspection-1.56.1_1,1.txz Installing /packages/All/gnome_subr-1.0.txz Installing /packages/All/avahi-app-0.7_3.txz ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. Installing /packages/All/libpaper-1.1.24.4.txz Installing /packages/All/cups-2.3.3_1.txz ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. Installing /packages/All/libfontenc-1.1.4.txz Installing /packages/All/mkfontscale-1.2.1.txz Installing /packages/All/font-bh-ttf-1.0.3_4.txz Installing /packages/All/font-misc-meltho-1.0.3_4.txz Installing /packages/All/font-misc-ethiopic-1.0.4.txz Installing /packages/All/encodings-1.0.5,1.txz Installing /packages/All/dejavu-2.37_1.txz ===== Message from dejavu-2.37_1: -- Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. Installing /packages/All/xorg-fonts-truetype-7.7_1.txz Installing /packages/All/libXft-2.3.3.txz Installing /packages/All/pango-1.42.4_4.txz Installing /packages/All/hicolor-icon-theme-0.17.txz Installing /packages/All/gtk-update-icon-cache-3.24.20.txz Installing /packages/All/adwaita-icon-theme-3.28.0.txz Installing /packages/All/libcroco-0.6.13.txz Installing /packages/All/libgsf-1.14.47_1.txz Installing /packages/All/librsvg2-2.40.21.txz Installing /packages/All/wayland-protocols-1.20.txz Installing /packages/All/libXcomposite-0.4.5,1.txz Installing /packages/All/libXcursor-1.2.0.txz Installing /packages/All/gtk3-3.24.20.txz Installing /packages/All/libxslt-1.1.34_1.txz Installing /packages/All/libunwind-20200331_1.txz Installing /packages/All/gstreamer1-1.16.2.txz Installing /packages/All/json-glib-1.4.4.txz Installing /packages/All/geoclue-2.5.5.txz Installing /packages/All/orc-0.4.31.txz Installing /packages/All/iso-codes-4.2.txz Installing /packages/All/gstreamer1-plugins-1.16.2.txz Installing /packages/All/gstreamer1-plugins-bad-1.16.2.txz Installing /packages/All/pygobject3-common-3.28.3_2.txz Installing /packages/All/py37-setuptools-44.0.0.txz Installing /packages/All/py37-cairo-1.18.1_1.txz Installing /packages/All/py37-gobject3-3.28.3_2.txz Installing /packages/All/graphene-1.10.0.txz Installing /packages/All/libGLU-9.0.1.txz Installing /packages/All/gstreamer1-plugins-gl-1.16.2.txz Installing /packages/All/libXt-1.2.0,1.txz Installing /packages/All/webkit2-gtk3-2.28.4.txz Installing /packages/All/dconf-0.36.0.txz Installing /packages/All/gtk2-2.24.32.txz Installing /packages/All/libIDL-0.8.14_4.txz Installing /packages/All/ORBit2-2.14.19_2.txz Installing /packages/All/gconf2-3.2.6_5.txz Installing /packages/All/wx31-gtk3-3.1.4.txz Installing /packages/All/libnghttp2-1.41.0.txz Installing /packages/All/curl-7.72.0.txz Installing /packages/All/libuv-1.39.0.txz Installing /packages/All/rhash-1.3.9.txz Installing /packages/All/liblz4-1.9.2_1,1.txz Installing /packages/All/lzo2-2.10_1.txz Installing /packages/All/libarchive-3.4.3,1.txz Installing /packages/All/cmake-3.18.2.txz Installing /packages/All/ninja-1.10.1,2.txz Installing /packages/All/snappy-1.1.8.txz Installing /packages/All/zstd-1.4.5_1.txz Installing /packages/All/c-blosc-1.15.0_2.txz Installing /packages/All/ilmbase-2.5.3.txz Installing /packages/All/tbb-2020.3.txz Installing /packages/All/py37-boost-libs-1.72.0_1.txz ===== Message from py37-boost-libs-1.72.0_1: -- You have built the Boost library with thread support. Don't forget to add -pthread to your linker options when linking your code. Installing /packages/All/glfw-3.3.2.txz ===== Message from glfw-3.3.2: -- ===> NOTICE: The glfw port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/openexr-2.5.3.txz Installing /packages/All/mpfr-4.1.0.txz Installing /packages/All/metis-5.1.0_8.txz ===== Message from metis-5.1.0_8: -- ===> NOTICE: The metis port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Installing /packages/All/mpc-1.1.0_2.txz UNFLAVORED devel/binutils -> use devel/binutils@native Installing /packages/All/binutils-2.33.1_3,1.txz Installing /packages/All/gcc8-8.4.0.txz ===== Message from gcc8-8.4.0: -- To ensure binaries built with this toolchain find appropriate versions of the necessary run-time libraries, you may want to link using -Wl,-rpath=/usr/local/lib/gcc8 For ports leveraging USE_GCC, USES=compiler, or USES=fortran this happens transparently. Installing /packages/All/openblas-0.3.10,1.txz Installing /packages/All/suitesparse-5.8.1.txz Installing /packages/All/py37-numpy-1.16.6,1.txz Installing /packages/All/openvdb-7.0.0_5.txz Installing /packages/All/qtchooser-66_3.txz ===== Message from qtchooser-66_3: -- qtchooser is a wrapper that allows selecting whether Qt4 or Qt5 binaries for qmake, moc and other tools will be run when invoking the binaries in $PATH. By default, the Qt5 versions are run. It is possible to change the behavior by setting the QT_SELECT environment variable to "qt4". See qtchooser(1) for more information. Installing /packages/All/qt5-buildtools-5.15.0.txz Installing /packages/All/libtextstyle-0.21.txz Installing /packages/All/gettext-tools-0.21.txz Installing /packages/All/pkgconf-1.7.3,1.txz Installing /packages/All/libltdl-2.4.6.txz Installing /packages/All/boehm-gc-8.0.4_1.txz Installing /packages/All/boehm-gc-threaded-8.0.4_1.txz Installing /packages/All/guile2-2.2.7_1.txz Installing /packages/All/nlopt-2.6.2.txz Installing /packages/All/libXmu-1.1.3,1.txz Installing /packages/All/glew-2.2.0.txz UNFLAVORED devel/binutils -> use devel/binutils@native SUCCEEDED 00:03:24 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> PrusaSlicer-2.2.0_6 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> PrusaSlicer-2.2.0_6 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by PrusaSlicer-2.2.0_6 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> PrusaSlicer-2.2.0_6 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by PrusaSlicer-2.2.0_6 for building => SHA256 Checksum OK for prusa3d-PrusaSlicer-version_2.2.0_GH0.tar.gz. => SHA256 Checksum OK for CGAL-cgal-releases-CGAL-5.0.2_GH0.tar.gz. SUCCEEDED 00:00:05 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> PrusaSlicer-2.2.0_6 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by PrusaSlicer-2.2.0_6 for building ===> Extracting for PrusaSlicer-2.2.0_6 ===> PrusaSlicer-2.2.0_6 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by PrusaSlicer-2.2.0_6 for building => SHA256 Checksum OK for prusa3d-PrusaSlicer-version_2.2.0_GH0.tar.gz. => SHA256 Checksum OK for CGAL-cgal-releases-CGAL-5.0.2_GH0.tar.gz. Extracted Memory Use: 462.27M SUCCEEDED 00:00:20 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for PrusaSlicer-2.2.0_6 ===> Applying ports patches for PrusaSlicer-2.2.0_6 from /xports/cad/PrusaSlicer/files ===> Applying dragonfly patches for PrusaSlicer-2.2.0_6 from /xports/cad/PrusaSlicer/dragonfly /usr/bin/env WRKSRC=/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 REWARNFILE=/construction/cad/PrusaSlicer/reinplace_warnings.txt /xports/Mk/Scripts/sed_checked.sh -e 's,%%WRKSRC%%,/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0,' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CMakeLists.txt /usr/bin/env WRKSRC=/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 REWARNFILE=/construction/cad/PrusaSlicer/reinplace_warnings.txt /xports/Mk/Scripts/sed_checked.sh -e 's@ STREQUAL "\(FreeBSD\)"@ MATCHES "\1|DragonFly"@g' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/hidapi/CMakeLists.txt SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> PrusaSlicer-2.2.0_6 depends on package: cereal>=1.2.2 - found ===> PrusaSlicer-2.2.0_6 depends on package: eigen>=3.3 - found ===> PrusaSlicer-2.2.0_6 depends on package: googletest>=1.7 - found ===> PrusaSlicer-2.2.0_6 depends on package: boost-libs>=1.64 - found ===> PrusaSlicer-2.2.0_6 depends on package: wx31-gtk3>=3.1 - found ===> PrusaSlicer-2.2.0_6 depends on package: cmake>=3.2 - found ===> PrusaSlicer-2.2.0_6 depends on package: ninja>=1.8.2 - found ===> PrusaSlicer-2.2.0_6 depends on package: openvdb>=6.1.0 - found ===> PrusaSlicer-2.2.0_6 depends on package: gmp>=6.1.2 - found ===> PrusaSlicer-2.2.0_6 depends on package: mpfr>=4.0.2 - found ===> PrusaSlicer-2.2.0_6 depends on package: qt5-buildtools>=0 - found ===> PrusaSlicer-2.2.0_6 depends on file: /usr/local/bin/cmake - found ===> PrusaSlicer-2.2.0_6 depends on executable: msgfmt - found ===> PrusaSlicer-2.2.0_6 depends on package: libiconv>=1.14_11 - found ===> PrusaSlicer-2.2.0_6 depends on package: pkgconf>=1.3.0_1 - found ===> PrusaSlicer-2.2.0_6 depends on package: xorgproto>=0 - found ===> PrusaSlicer-2.2.0_6 depends on package: xorgproto>=0 - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- ===> PrusaSlicer-2.2.0_6 depends on shared library: libtbb.so - found (/usr/local/lib/libtbb.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libboost_log.so - found (/usr/local/lib/libboost_log.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libHalf.so - found (/usr/local/lib/libHalf.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libnlopt.so - found (/usr/local/lib/libnlopt.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libcurl.so - found (/usr/local/lib/libcurl.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libexpat.so - found (/usr/local/lib/libexpat.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libopenvdb.so - found (/usr/local/lib/libopenvdb.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libgmp.so - found (/usr/local/lib/libgmp.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libmpfr.so - found (/usr/local/lib/libmpfr.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libintl.so - found (/usr/local/lib/libintl.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libGL.so - found (/usr/local/lib/libGL.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libGLU.so - found (/usr/local/lib/libGLU.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libGLEW.so - found (/usr/local/lib/libGLEW.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libwx_baseu-3.1.so - found (/usr/local/lib/libwx_baseu-3.1.so) SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> PrusaSlicer-2.2.0_6 depends on package: cereal>=1.2.2 - found ===> PrusaSlicer-2.2.0_6 depends on package: eigen>=3.3 - found ===> PrusaSlicer-2.2.0_6 depends on package: googletest>=1.7 - found ===> PrusaSlicer-2.2.0_6 depends on package: boost-libs>=1.64 - found ===> PrusaSlicer-2.2.0_6 depends on package: wx31-gtk3>=3.1 - found ===> PrusaSlicer-2.2.0_6 depends on package: cmake>=3.2 - found ===> PrusaSlicer-2.2.0_6 depends on package: ninja>=1.8.2 - found ===> PrusaSlicer-2.2.0_6 depends on package: openvdb>=6.1.0 - found ===> PrusaSlicer-2.2.0_6 depends on package: gmp>=6.1.2 - found ===> PrusaSlicer-2.2.0_6 depends on package: mpfr>=4.0.2 - found ===> PrusaSlicer-2.2.0_6 depends on package: qt5-buildtools>=0 - found ===> PrusaSlicer-2.2.0_6 depends on file: /usr/local/bin/cmake - found ===> PrusaSlicer-2.2.0_6 depends on executable: msgfmt - found ===> PrusaSlicer-2.2.0_6 depends on package: libiconv>=1.14_11 - found ===> PrusaSlicer-2.2.0_6 depends on package: pkgconf>=1.3.0_1 - found ===> PrusaSlicer-2.2.0_6 depends on package: xorgproto>=0 - found ===> PrusaSlicer-2.2.0_6 depends on package: xorgproto>=0 - found ===> PrusaSlicer-2.2.0_6 depends on shared library: libtbb.so - found (/usr/local/lib/libtbb.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libboost_log.so - found (/usr/local/lib/libboost_log.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libHalf.so - found (/usr/local/lib/libHalf.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libnlopt.so - found (/usr/local/lib/libnlopt.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libcurl.so - found (/usr/local/lib/libcurl.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libexpat.so - found (/usr/local/lib/libexpat.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libopenvdb.so - found (/usr/local/lib/libopenvdb.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libgmp.so - found (/usr/local/lib/libgmp.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libmpfr.so - found (/usr/local/lib/libmpfr.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libintl.so - found (/usr/local/lib/libintl.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libGL.so - found (/usr/local/lib/libGL.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libGLU.so - found (/usr/local/lib/libGLU.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libGLEW.so - found (/usr/local/lib/libGLEW.so) ===> PrusaSlicer-2.2.0_6 depends on shared library: libwx_baseu-3.1.so - found (/usr/local/lib/libwx_baseu-3.1.so) ===> Configuring for PrusaSlicer-2.2.0_6 cd /construction/cad/PrusaSlicer/cgal-releases-CGAL-5.0.2 && /usr/local/bin/cmake -E remove CGALConfig-installation-dirs.cmake && /bin/mkdir -p build && cd build && /usr/local/bin/cmake -DCMAKE_INSTALL_PREFIX=/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL -DCMAKE_PREFIX_PATH=/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL -DCMAKE_MODULE_PATH=/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/cmake/modules -DCMAKE_BUILD_TYPE=Release .. && /usr/bin/make all install == CMake setup == -- The CXX compiler identification is GNU 8.3.0 -- The C compiler identification is GNU 8.3.0 -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /usr/bin/CC - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /usr/bin/cc - skipped -- Detecting C compile features -- Detecting C compile features - done == CMake setup (DONE) == == Setting paths == -- Build CGAL from n/a-branch: n/a -- Removed not-a-package: .gitattributes;.github;.gitignore;.travis;.travis.yml;CGALConfig.cmake;Documentation;INSTALL.md;LICENSE.md;Miscellany;README.md;build;ccpp.yml;cmake_uninstall.cmake.in -- Installation package directory: /construction/cad/PrusaSlicer/cgal-releases-CGAL-5.0.2/Installation -- Maintenance package directory: /construction/cad/PrusaSlicer/cgal-releases-CGAL-5.0.2/Maintenance -- Core package directory: /construction/cad/PrusaSlicer/cgal-releases-CGAL-5.0.2/Core -- Packagenames: AABB_tree;Advancing_front_surface_reconstruction;Algebraic_foundations;Algebraic_kernel_d;Algebraic_kernel_for_circles;Algebraic_kernel_for_spheres;Alpha_shapes_2;Alpha_shapes_3;Apollonius_graph_2;Arithmetic_kernel;Arrangement_on_surface_2;BGL;Barycentric_coordinates_2;Boolean_set_operations_2;Bounding_volumes;Box_intersection_d;CGAL_Core;CGAL_ImageIO;CGAL_ipelets;Cartesian_kernel;Circular_kernel_2;Circular_kernel_3;Circulator;Classification;Combinatorial_map;Cone_spanners_2;Convex_decomposition_3;Convex_hull_2;Convex_hull_3;Convex_hull_d;Distance_2;Distance_3;Envelope_2;Envelope_3;Filtered_kernel;Generalized_map;Generator;Geomview;GraphicsView;HalfedgeDS;Hash_map;Heat_method_3;Homogeneous_kernel;Hyperbolic_triangulation_2;Inscribed_areas;Installation;Interpolation;Intersections_2;Intersections_3;Interval_skip_list;Interval_support;Inventor;Jet_fitting_3;Kernel_23;Kernel_d;LEDA;Linear_cell_complex;MacOSX;Maintenance;Matrix_search;Mesh_2;Mesh_3;Mesher_level;Minkowski_sum_2;Minkowski_sum_3;Modifier;Modular_arithmetic;Nef_2;Nef_3;Nef_S2;NewKernel_d;Number_types;OpenNL;Optimal_transportation_reconstruction_2;Optimisation_basic;Partition_2;Periodic_2_triangulation_2;Periodic_3_mesh_3;Periodic_3_triangulation_3;Periodic_4_hyperbolic_triangulation_2;Point_set_2;Point_set_3;Point_set_processing_3;Poisson_surface_reconstruction_3;Polygon;Polygon_mesh_processing;Polygonal_surface_reconstruction;Polyhedron;Polyhedron_IO;Polyline_simplification_2;Polynomial;Polytope_distance_d;Principal_component_analysis;Principal_component_analysis_LGPL;Profiling_tools;Property_map;QP_solver;Random_numbers;Ridges_3;STL_Extension;Scale_space_reconstruction_3;Scripts;SearchStructures;Segment_Delaunay_graph_2;Segment_Delaunay_graph_Linf_2;Set_movable_separability_2;Shape_detection;Skin_surface_3;Snap_rounding_2;Solver_interface;Spatial_searching;Spatial_sorting;Straight_skeleton_2;Stream_lines_2;Stream_support;Subdivision_method_3;Surface_mesh;Surface_mesh_approximation;Surface_mesh_deformation;Surface_mesh_parameterization;Surface_mesh_segmentation;Surface_mesh_shortest_path;Surface_mesh_simplification;Surface_mesh_skeletonization;Surface_mesher;Surface_sweep_2;TDS_2;TDS_3;Testsuite;Three;Triangulation;Triangulation_2;Triangulation_3;Union_find;Visibility_2;Voronoi_diagram_2;wininst == Setting paths (DONE) == == Generate version files == -- CGAL_VERSION is 5.0.2-I-900 -- CGAL_VERSION_NR is 1050020900 -- CGAL_GIT_HASH is -- CGAL_CREATED_SVN_REVISION is 99999 (dummy) -- CGAL_MAJOR_VERSION=5 -- CGAL_MINOR_VERSION=0 -- CGAL_BUGFIX_VERSION=2 -- CGAL_BUILD_VERSION=900 -- CGAL_SONAME_VERSION=13 -- CGAL_SOVERSION =13.0.3 -- CGAL_REFERENCE_CACHE_DIR= -- Building shared libraries -- Targetting Unix Makefiles -- Using /usr/bin/CC compiler. -- USING CMake version: 3.18.2 -- System: DragonFly -- USING GCC_VERSION = '8.3 [DragonFly] Release/2019-02-22' -- Using gcc version 4 or later. Adding -frounding-math == Generate version files (DONE) == -- Build type: Release -- USING CXXFLAGS = ' -O3 -DNDEBUG' -- USING LDFLAGS = ' ' == Detect external libraries == == Detect external libraries (DONE) == == Generating build files == Configuring libCGAL -- Found GMP: /usr/local/lib/libgmp.so -- Found MPFR: /usr/local/lib/libmpfr.so -- Found Boost: /usr/local/include (found suitable version "1.72.0", minimum required is "1.48") -- Boost include dirs: /usr/local/include -- Boost libraries: -- Using gcc version 4 or later. Adding -frounding-math -- USING GMP_VERSION = '6.2.0' -- USING MPFR_VERSION = '4.1.0' -- USING BOOST_VERSION = '1.72.0' libCGAL is configured -- Sources for CGAL component library 'CGAL_Core' detected -- Looking for pthread.h -- Looking for pthread.h - found -- Performing Test CMAKE_HAVE_LIBC_PTHREAD -- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Failed -- Looking for pthread_create in pthreads -- Looking for pthread_create in pthreads - not found -- Looking for pthread_create in pthread -- Looking for pthread_create in pthread - found -- Found Threads: TRUE -- Found Boost: /usr/local/include (found suitable version "1.72.0", minimum required is "1.48") found components: thread system chrono date_time atomic Configuring libCGAL_Core libCGAL_Core is configured -- Sources for CGAL component library 'CGAL_ImageIO' detected Configuring libCGAL_ImageIO -- Found ZLIB: /usr/lib/libz.so (found version "1.2.11") -- USING ZLIB_VERSION = '1.2.11' libCGAL_ImageIO is configured -- Sources for CGAL component library 'CGAL_Qt5' detected Configuring libCGAL_Qt5 -- libCGAL_Qt5 is missing the dependencies: Qt5OpenGL Qt5Svg Qt5 cannot be configured. -- Sources for CGAL component libraries 'CGAL_Core;CGAL_ImageIO;CGAL_Qt5' detected == Generating build files (DONE) == -- Configuring done -- Generating done -- Build files have been written to: /construction/cad/PrusaSlicer/cgal-releases-CGAL-5.0.2/build Install the project... -- Install configuration: "Release" -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/share/doc/CGAL-5.0.2-I-900/AUTHORS -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/share/doc/CGAL-5.0.2-I-900/CHANGES.md -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/share/doc/CGAL-5.0.2-I-900/LICENSE -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/share/doc/CGAL-5.0.2-I-900/LICENSE.FREE_USE -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/share/doc/CGAL-5.0.2-I-900/LICENSE.GPL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/share/doc/CGAL-5.0.2-I-900/LICENSE.LGPL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/AABB_triangulation_3_triangle_primitive.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/AABB_halfedge_graph_segment_primitive.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/AABB_face_graph_triangle_primitive.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AABB_tree -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AABB_tree/AABB_drawing_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AABB_tree/AABB_ray_intersection.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AABB_tree/AABB_search_tree.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AABB_tree/AABB_node.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AABB_tree/AABB_traversal_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AABB_tree/Has_nested_type_Shared_data.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AABB_tree/Is_ray_intersection_geomtraits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AABB_tree/Primitive_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/AABB_triangulation_3_cell_primitive.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/AABB_primitive.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/AABB_polyhedron_triangle_primitive.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/AABB_triangle_primitive.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/AABB_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/AABB_tree.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/AABB_segment_primitive.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/AABB_polyhedron_segment_primitive.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Advancing_front_surface_reconstruction_vertex_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Advancing_front_surface_reconstruction_cell_base_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AFSR -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AFSR/orient.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AFSR/construct_polyhedron.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AFSR/Surface_vertex_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AFSR/construct_surface_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AFSR/Surface_face_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/AFSR/write_triple_indices.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Advancing_front_surface_reconstruction.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Rational_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/number_utils.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/number_utils_classes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_extension_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/extended_euclidean_algorithm.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Test -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Test/_test_algebraic_structure.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Test/_test_rational_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Test/_test_fraction_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Test/_test_coercion_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Test/_test_real_embeddable.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Real_embeddable_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Chinese_remainder_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ipower.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Scalar_factor_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Needs_parens_as_product.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_structure_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Fraction_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Coercion_traits.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/signat_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/rs3_k_refiner_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/Gmpfr_make_unique.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/ak_z_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/dyadic.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/ak_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/functors_z_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/exact_signat_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/bisection_refiner_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/rs2_isolator_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/comparator_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/rs2_calls.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/algebraic_z_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/algebraic_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/polynomial_converter_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/functors_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/rs3_refiner_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/RS/rs23_k_isolator_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_rs_gmpq_d_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/construct_binary.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/macros.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Bitstream_coefficient_kernel_at_alpha.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/LRU_hashed_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Bitstream_descartes_E08_tree.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Shear_controller.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Interval_evaluate_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/flags.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Real_roots.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Bitstream_descartes_rndl_tree_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Xy_coordinate_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Algebraic_real_rep.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/refine_zero_against.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Algebraic_real_rep_bfi.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Float_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Curve_pair_analysis_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Shear_transformation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Algebraic_real_d_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Status_line_CPA_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Status_line_CA_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Algebraic_curve_kernel_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Bitstream_descartes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/univariate_polynomial_utils.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Event_line_builder.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Bitstream_coefficient_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/enums.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Descartes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Interval_evaluate_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Real_embeddable_extension.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Algebraic_real_quadratic_refinement_rep_bfi.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/shear.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Bitstream_descartes_rndl_tree.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/algebraic_curve_kernel_2_tools.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/bound_between_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/exceptions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_d/Curve_analysis_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_rs_gmpz_d_1.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomials_2_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Root_for_circles_2_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomials_1_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_for_circles_2_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_for_circles -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_for_circles/function_objects_on_roots_and_polynomials_2_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_for_circles/internal_functions_comparison_root_for_circles_2_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_for_circles/internal_functions_on_roots_and_polynomials_2_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_for_circles/internal_functions_on_roots_and_polynomial_1_2_and_2_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_converter.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomials_1_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/global_functions_on_roots_and_polynomials_1_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/global_functions_on_roots_and_polynomials_2_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_for_spheres -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_for_spheres/internal_functions_on_roots_and_polynomial_1_3_and_2_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_for_spheres/internal_functions_on_roots_and_polynomials_2_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_for_spheres/internal_functions_comparison_root_for_spheres_2_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_for_spheres/internal_functions_on_roots_and_polynomials_1_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_for_spheres/function_objects_on_roots_and_polynomials_2_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/global_functions_on_root_for_sphere_2_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Algebraic_kernel_for_spheres_2_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomials_2_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Root_for_spheres_2_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomials_for_line_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Alpha_shape_vertex_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Weighted_alpha_shape_euclidean_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Alpha_shape_euclidean_traits_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Lazy_alpha_nt_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Alpha_shape_face_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Alpha_shape_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Alpha_shape_vertex_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Alpha_shape_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Weighted_alpha_shape_euclidean_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/alpha_shape_geomview_ostream_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Lazy_alpha_nt_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Classification_type.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Alpha_shape_euclidean_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Fixed_alpha_shape_vertex_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Alpha_shape_cell_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Fixed_alpha_shape_cell_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Fixed_alpha_shape_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_filtered_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_vertex_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_data_structure_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Finite_edge_test8_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Predicates_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/basic.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Kernel_wrapper_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Compare_weight_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Incircle_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Predicate_constructions_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Orientation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/check_filter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/uncertain -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/uncertain/Uncertain_vertex_conflict_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/uncertain/Uncertain_is_hidden_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/uncertain/Uncertain_oriented_side_of_bisector_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/uncertain/uncertain_functions_on_signs.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Constructions_rtH2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Traits_wrapper_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/compare_quadratic.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Is_degenerate_edge_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Constructions_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Finite_edge_test_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Apollonius_graph_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Bounded_side_of_ccw_circle_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Apollonius_graph_hierarchy_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Compare_y_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Orientation8_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Constructions_ftC2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Oriented_side_of_bisector_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/predicate_profiler.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Incircle8_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Is_hidden_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Compare_x_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/Infinite_edge_test_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2/comparator_profiler.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_hierarchy_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Parabola_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Parabola_segment_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/in_place_edge_list.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/functions_on_signs.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_site_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hyperbola_segment_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/more_functions_on_signs.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hyperbola_ray_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hyperbola_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_hierarchy_vertex_base_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Get_arithmetic_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/BOOST_MP_arithmetic_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GMP_arithmetic_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE_arithmetic_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GMPXX_arithmetic_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/MP_Float_arithmetic_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arithmetic_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/LEDA_arithmetic_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arithmetic_kernel -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arithmetic_kernel/Arithmetic_kernel_base.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_algebraic_segment_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_conic_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_landmarks_point_location.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_default_overlay_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geodesic_arc_on_sphere_partition_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_2/Arr_default_planar_topology.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_2/Arrangement_2_iterators.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_2/graph_traits_dual.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_2/Arrangement_zone_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_2/Arr_on_surface_with_history_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_2/arrangement_type_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_2/Arr_with_history_accessor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_2/Arrangement_on_surface_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_2/Arrangement_on_surface_2_global.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_2/Arr_compute_zone_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_2/Arr_do_intersect_zone_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_2/Arr_traits_adaptor_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_2/Arr_traits_adaptor_2_dispatching.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/graph_traits_Arrangement_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_consolidated_curve_data_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_face_index_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_default_dcel.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Arr_iostream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Fig_stream_Conic_arc_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Arrangement_2_writer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Arr_with_history_text_formatter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Arrangement_2_reader.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Arr_with_history_2_writer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Arr_with_history_2_reader.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Arr_with_history_iostream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Fig_stream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Arr_text_formatter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_non_caching_segment_basic_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_trapezoid_ric_point_location.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_line_arc_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_polycurve_basic_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_directional_non_caching_segment_basic_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_unb_planar_topology_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_naive_point_location.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_batched_point_location.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/graph_traits_dual_arrangement_on_surface_with_history_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/graph_traits_dual_arrangement_on_surface_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_overlay_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_accessor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_zone_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_vertex_index_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_circular_arc_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE_algebraic_number_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_counting_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_circular_line_arc_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_rational_function_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_on_surface_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_segment_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/graph_traits_dual_arrangement_with_history_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_non_caching_segment_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_bounded_planar_topology_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_with_history_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_circle_segment_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/graph_traits_dual_arrangement_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_Bezier_curve_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_curve_data_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_dcel_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Conic_intersections_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/IO/Polycurve_2_iostream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Polyline_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Bezier_curve_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Curve_data_aux.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Conic_point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Circle_segment_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Conic_x_monotone_arc_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Rational_arc_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Bezier_bounding_rational_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Polycurve_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Arr_plane_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Bezier_cache.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Consolidated_curve_data_aux.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/de_Casteljau_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Conic_arc_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Bezier_x_monotone_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/One_root_number.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Segment_assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geometry_traits/Bezier_point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_enums.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_triangulation_point_location.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_spherical_gaussian_map_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_spherical_gaussian_map_3/Arr_polyhedral_sgm_overlay.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_spherical_gaussian_map_3/Arr_on_sphere_transformation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_spherical_gaussian_map_3/Arr_polyhedral_sgm_arr_dcel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_spherical_gaussian_map_3/Arr_polyhedral_sgm.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_spherical_gaussian_map_3/Arr_polyhedral_sgm_transformation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_spherical_gaussian_map_3/Arr_spherical_gaussian_map_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_spherical_gaussian_map_3/Arr_transform_on_sphere.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_spherical_gaussian_map_3/Arr_polyhedral_sgm_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_spherical_gaussian_map_3/Arr_polyhedral_sgm_polyhedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_spherical_gaussian_map_3/Arr_polyhedral_sgm_initializer_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location_result.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_tracing_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_extended_dcel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Arr_construction_event_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Arr_overlay_ss_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Arr_construction_event.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Arr_overlay_event.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Arr_basic_insertion_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Arr_insertion_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Arr_default_overlay_traits_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Arr_batched_pl_ss_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Arr_overlay_subcurve.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Arr_vert_decomp_ss_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Arr_construction_subcurve.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Arr_no_intersection_insertion_ss_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Arr_construction_ss_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Arr_overlay_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Arr_insertion_ss_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_spherical_topology_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_polycurve_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Td_inactive_vertex.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Td_active_edge.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_walk_along_line_pl_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_lm_vertices_generator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Td_active_fictitious_vertex.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_trapezoid_ric_pl_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_batched_point_location_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Trapezoidal_decomposition_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_triangulation_pl_functions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_landmarks_pl_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Td_inactive_fictitious_vertex.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_triangulation_pl_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_lm_nearest_neighbor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Td_active_vertex.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Td_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Trapezoidal_decomposition_2_misc.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Td_dag_node.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_lm_middle_edges_generator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Trapezoidal_decomposition_2_iostream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Td_predicates.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_lm_specified_points_generator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Td_inactive_edge.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_lm_random_generator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Td_X_trapezoid.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Trapezoidal_decomposition_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Td_dag.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_naive_point_location_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Td_active_trapezoid.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Td_ninetuple.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Td_inactive_trapezoid.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_lm_generator_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_lm_grid_generator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_lm_halton_generator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_point_location/Arr_simple_point_location_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arrangement_on_surface_with_history_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_vertex_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_spherical_vert_decomp_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_bounded_planar_insertion_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_spherical_batched_pl_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_unb_planar_insertion_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_bounded_planar_vert_decomp_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_bounded_planar_batched_pl_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_bounded_planar_construction_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_inc_insertion_zone_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_spherical_insertion_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_unb_planar_construction_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_planar_topology_traits_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_unb_planar_topology_traits_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_unb_planar_vert_decomp_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_bounded_planar_overlay_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_bounded_planar_topology_traits_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_spherical_topology_traits_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_unb_planar_overlay_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_spherical_overlay_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_unb_planar_batched_pl_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_topology_traits/Arr_spherical_construction_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_Arrangement_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_Dual_Arrangement_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_polyline_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_tags.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_geodesic_arc_on_sphere_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_overlay.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_simple_point_location.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_face_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_rat_arc -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_rat_arc/Rational_arc_d_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_rat_arc/Singleton.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_rat_arc/Cache.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_rat_arc/Rational_function_canonicalized_pair.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_rat_arc/Algebraic_point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_rat_arc/Rational_function_ordered_pair.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_rat_arc/Base_rational_arc_ds_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_rat_arc/Rational_function_pair.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_rat_arc/Rational_function.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/Curved_kernel_via_analysis_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/Make_x_monotone_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/Non_x_monotone_arc_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/Point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/gfx -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/gfx/Curve_renderer_internals.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/gfx/Curve_renderer_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/gfx/Curve_renderer_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/gfx/Subdivision_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/gfx/Subdivision_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/Curve_renderer_facade.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/test -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/test/simple_models.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/Sweep_curves_adapter_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/Curved_kernel_via_analysis_2_functors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/Fig_stream_Curve_renderer_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/Curve_interval_arcno_cache.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/Generic_arc_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/Generic_point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/Filtered_curved_kernel_via_analysis_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Curved_kernel_via_analysis_2/Arc_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_linear_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_walk_along_line_point_location.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_observer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Arr_vertical_decomposition_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/parameter.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/halfedge_graph_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/property_maps.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_concepts.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/partition.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/Dual.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_PolyMesh_ArrayKernelT.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/internal/OM_iterator_from_circulator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/internal/Has_member_id.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/internal/helpers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/internal/Has_member_clear.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_TriMesh_ArrayKernelT.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/generators.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/Face_filtered_graph.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/named_params_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_OpenMesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/Seam_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/io.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_PolyMesh_ArrayKernelT.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/METIS -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/METIS/partition_dual_graph.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/METIS/partition_graph.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_TriMesh_ArrayKernelT.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/dijkstra_shortest_paths.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/helpers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/Named_function_parameters.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/Graph_with_descriptor_with_graph_fwd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/backward_compatibility_functions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/parameters_interface.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/selection.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/Graph_with_descriptor_with_graph.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_OpenMesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/copy_face_graph.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/dijkstra_shortest_paths.hpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/split_graph_into_polylines.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_Seam_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/Euler_operations.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Seam_mesh.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Barycentric_coordinates_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Barycentric_coordinates_2/barycentric_enum_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Barycentric_coordinates_2/Generalized_barycentric_coordinates_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Barycentric_coordinates_2/Triangle_coordinates_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Barycentric_coordinates_2/Segment_coordinates_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Barycentric_coordinates_2/Mean_value_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Barycentric_coordinates_2/Wachspress_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Barycentric_coordinates_2/Discrete_harmonic_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Barycentric_coordinates_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/General_polygon_set_on_surface_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Gps_segment_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/General_polygon_set_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/connect_holes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Gps_circle_segment_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/General_polygon_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Dxf_bsop_reader.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Gps_iostream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Gps_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_agg_op.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_agg_meta_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Curve_with_halfedge.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_polygon_simplifier.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_bfs_join_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_merge.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_traits_adaptor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Bso_internal_functions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_agg_op_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_on_surface_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_join_functor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_base_functor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_intersection_functor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_default_dcel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_on_surface_base_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Polygon_2_curve_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_difference_functor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_traits_decorator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_insertion_meta_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_simplifier_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_do_intersect_functor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_agg_op_surface_sweep_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_default_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_bfs_base_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_bfs_scanner.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_sym_diff_functor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_bfs_intersection_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_bfs_xor_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Indexed_event.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Gps_polygon_validation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Ccb_curve_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Boolean_set_operations_2/Point_with_vertex.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_set_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_of_points_d_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/rectangular_3_center_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/pierce_rectangles_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_annulus_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_annulus_d_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_quadrilateral_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_of_points_d_traits_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Approximate_min_ellipsoid_d_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_annulus_d_traits_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_of_spheres_d_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_of_spheres_d -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_of_spheres_d/Min_sphere_of_spheres_d_support_set.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_of_spheres_d/Min_sphere_of_spheres_d_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_of_spheres_d/Min_sphere_of_spheres_d_support_set_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_of_spheres_d/Min_sphere_of_spheres_d_pivot_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_of_spheres_d/Min_sphere_of_spheres_d_pair.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_of_spheres_d/Min_sphere_of_spheres_d_configure.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_of_spheres_d_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minimum_enclosing_quadrilateral_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Approximate_min_ellipsoid_d_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Approximate_min_ellipsoid_d_traits_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Rectangular_p_center_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_ellipse_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_d -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_d/Optimisation_sphere_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_d/Min_sphere_d_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_ellipse_2_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/min_quadrilateral_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_annulus_d_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_ellipse_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_ellipse_2/Min_ellipse_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_ellipse_2/Optimisation_ellipse_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_ellipse_2/Min_ellipse_2_adapterH2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_ellipse_2/Min_ellipse_2_adapterC2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_ellipse_2/Optimisation_ellipse_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_of_spheres_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_circle_2_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_of_spheres_d_traits_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_circle_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_circle_2/Min_circle_2_adapterH2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_circle_2/Min_circle_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_circle_2/Optimisation_circle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_circle_2/Min_circle_2_adapterC2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_circle_2/Optimisation_circle_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/rectangular_p_center_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_circle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Approximate_min_ellipsoid_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Approximate_min_ellipsoid_d -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Approximate_min_ellipsoid_d/Khachiyan_approximation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Approximate_min_ellipsoid_d/Khachiyan_approximation_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Approximate_min_ellipsoid_d/Approximate_min_ellipsoid_d_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Approximate_min_ellipsoid_d/Approximate_min_ellipsoid_d_configure.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Approximate_min_ellipsoid_d/Approximate_min_ellipsoid_d_debug.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Min_sphere_of_points_d_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/minimum_enclosing_quadrilateral_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Box_intersection_d -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Box_intersection_d/Box_traits_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Box_intersection_d/box_limits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Box_intersection_d/Box_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Box_intersection_d/segment_tree.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Box_intersection_d/Box_with_handle_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Box_intersection_d/Box_with_info_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/box_intersection_d.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/poly -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/poly/Poly.tcc -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/poly/Sturm.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/poly/Poly.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/poly/Curves.tcc -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/poly/Curves.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/BigFloat.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/CoreDefs_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/MemoryPool.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/Gmp.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/RealRep.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/RefCount.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/BigInt.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/Promote.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/linearAlgebra.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/CoreAux.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/Expr_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/Impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/Timer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/BigFloatRep.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/Gmp_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/Real_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/CoreAux_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/BigFloat_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/Real.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/CoreDefs.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/BigRat.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/extLong_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/extLong.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/Config.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/Filter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/CORE.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/ExprRep.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/Expr.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE/CoreIO_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/export -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/export/CORE.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/read_vtk_image_data.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Image_3_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Image_3_vtk_interface.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Image_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/SEP_header.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/SEP_to_ImageIO.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/gif.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/analyze_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/gis_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/recline.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/mincio_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/gis.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/inr.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/bmp_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/bmpread_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/bmptypes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/bmp.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/bmpendian_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/inr_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/fgetns.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/iris.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/recline_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/recbuffer_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/bmpendian.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/recbuffer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/convert.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/reech4x4_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/mincio.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/analyze.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/pnm.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/fgetns_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/convert_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/reech4x4.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/pnm_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/bmpread.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/gif_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/iris_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO/typedefs.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ImageIO.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/export -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/export/ImageIO.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CGAL_Ipelet_base_v6.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/grabbers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CGAL_Ipelet_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CGAL_Ipelet_base_v7.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/constructions -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/constructions/kernel_ftC2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/constructions/kernel_ftC3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Simple_cartesian.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates/kernel_ftC3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates/kernel_ftC2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/ft_constructions_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Vector_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/function_objects.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Aff_transformation_rep_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Segment_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Plane_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Line_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Ray_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/plane_constructions_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Rotation_rep_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/line_constructions_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/solve_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Triangle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Vector_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Aff_transformation_rep_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/predicates_on_points_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Scaling_rep_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Cartesian_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Circle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Circle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Aff_transformation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Tetrahedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/ConicCPA2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Reflection_rep_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/predicates_on_points_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Translation_rep_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/point_constructions_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Aff_transformation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Weighted_point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Data_accessor_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Ray_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Scaling_rep_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/predicates_on_directions_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Direction_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Iso_cuboid_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/basic_constructions_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/basic_constructions_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Weighted_point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Iso_rectangle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Translation_rep_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Direction_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Triangle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Line_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/point_constructions_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/predicates_on_planes_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/ft_constructions_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/Segment_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian_converter.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Filtered_bbox_circular_kernel_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Simple_circular_kernel_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_arc_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Filtered_bbox_circular_kernel_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Filtered_bbox_circular_kernel_2/bbox_filtered_predicates.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Filtered_bbox_circular_kernel_2/interface_macros.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Exact_circular_kernel_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Line_arc_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_type_equality_wrapper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_intersections.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/global_functions_circular_kernel_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Dxf_reader.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Dxf_variant_reader.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Dxf_reader_doubles.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_2/function_objects_on_line_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_2/Circular_arc_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_2/Line_arc_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_2/interface_macros.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_2/Circular_arc_point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_2/internal_functions_on_circular_arc_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_2/internal_functions_on_circle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_2/internal_functions_on_line_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_2/Intersection_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_2/function_objects_polynomial_circular.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_2/internal_functions_on_line_arc_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_2/function_objects_on_circle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_2/intersection_line_2_circle_2_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_arc_point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_converter.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Spherical_kernel_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Simple_spherical_kernel_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circle_type.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Spherical_kernel_type_equality_wrapper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_arc_point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/internal_function_compare_spherical_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/function_objects_polynomial_sphere.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/internal_functions_on_sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/internal_functions_on_plane_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/internal_functions_on_circular_arc_point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/internal_function_compare_to_right_spherical_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/Intersection_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/internal_functions_on_line_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/interface_macros.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/internal_functions_on_circular_arc_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/get_equation_object_on_curved_kernel_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/internal_functions_on_circle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/internal_functions_on_line_arc_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/Circular_arc_point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/Line_arc_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/Circular_arc_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_kernel_3/internal_function_has_on_spherical_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Exact_spherical_kernel_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circular_arc_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Line_arc_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Spherical_kernel_intersections.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/global_functions_spherical_kernel_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/circulator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circulator -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circulator/Safe_circulator_from_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circulator/Circulator_adapters.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circulator/Circulator_concepts.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/circulator_bases.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Point_set_neighborhood.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Vertical_dispersion.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Elevation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Eigenvalue.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Cluster_vertical_extent.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Cluster_size.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Gradient_of_feature.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Cluster_mean_of_feature.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Vertical_range.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Height_above.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Distance_to_plane.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Echo_scatter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Cluster_variance_of_feature.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Simple_feature.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Height_below.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Color_channel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature/Verticality.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Mesh_neighborhood.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Sum_of_weighted_features_classifier.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/internal/verbosity.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Image.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Planimetric_grid.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/OpenCV -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/OpenCV/Random_forest_classifier.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Label_set.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Point_set_feature_generator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/ETHZ -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/ETHZ/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/ETHZ/internal/random-forest -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/ETHZ/internal/random-forest/common-libraries.hpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/ETHZ/internal/random-forest/node.hpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/ETHZ/internal/random-forest/tree.hpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/ETHZ/internal/random-forest/forest.hpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/ETHZ/internal/random-forest/node-gini.hpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/ETHZ/internal/dataview.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/ETHZ/Random_forest_classifier.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/TensorFlow -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/TensorFlow/Neural_network_classifier.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/property_maps.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Label.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Cluster.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/classify.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Feature_set.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Mesh_feature_generator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/compressed_float.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Evaluation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Classification/Local_eigen_analysis.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Dart_const_iterators.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Combinatorial_map_save_load.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cell_attribute_with_id.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Dart_iterators.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Combinatorial_map_functors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Combinatorial_map_min_items.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Dart.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Generic_map_min_items.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Combinatorial_map_storages.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cell_iterators.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cell_attribute.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Combinatorial_map_basic_operations.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Combinatorial_map_constructors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Combinatorial_map_iterators_base.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Combinatorial_map_internal_functors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Combinatorial_map_group_functors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Combinatorial_map_copy_functors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Combinatorial_map_sewable.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Combinatorial_map_utility.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Combinatorial_map_insertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Combinatorial_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cell_const_iterators.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Combinatorial_map_operations.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cone_spanners_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cone_spanners_2/Plane_scan_tree.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cone_spanners_2/Less_by_direction_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cone_spanners_2/Plane_scan_tree_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Construct_theta_graph_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Construct_yao_graph_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/gnuplot_output_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cone_spanners_enum_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Compute_cone_boundaries_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_decomposition_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_decomposition_3/Insert_vertex_into_edge.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_decomposition_3/Single_wall_creator3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_decomposition_3/SM_walls.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_decomposition_3/Single_wall_creator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_decomposition_3/Ray_hit_generator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_decomposition_3/YVertical_wall_builder.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_decomposition_3/Single_wall_creator2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_decomposition_3/Ray_hit_generator2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_decomposition_3/is_reflex_sedge.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_decomposition_3/External_structure_builder.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_decomposition_3/Edge_sorter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_decomposition_3/Reflex_vertex_searcher.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_decomposition_3/Reflex_edge_searcher.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_decomposition_3/SFace_separator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/convex_decomposition_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_traits_adapter_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Tee_for_output_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ch_akl_toussaint.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ch_bykat.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ch_function_objects_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ch_selected_extreme_points_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/segment_intersection_points_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ch_graham_andrew.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/convexity_check_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_projective_xy_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_projective_yz_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_2/convexity_check_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_2/ch_eddy_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_2/ch_bykat_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_2/ch_graham_andrew_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_2/ch_assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_2/ch_melkman_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_2/ch_selected_extreme_points_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_2/ch_jarvis_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_2/ch_akl_toussaint_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ch_melkman.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ch_eddy.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_projective_xz_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/convex_hull_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/convex_hull_constructive_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/ch_jarvis.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/convex_hull_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/convexity_check_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_face_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_3/dual -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_3/dual/interior_polyhedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_3/dual/Convex_hull_traits_dual_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_3/dual/halfspace_intersection_with_constructions_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_3/dual/Convex_hull_traits_dual_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_3/dual/halfspace_intersection_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_3/dual/predicates.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/convex_hull_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/convex_hull_3_to_polyhedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Extreme_points_traits_adapter_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/convex_hull_3_to_face_graph.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regular_complex_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_d_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_d_to_polyhedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Convex_hull_d.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/squared_distance_utils.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/wmult.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/squared_distance_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/squared_distance_2_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/squared_distance_2_1.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/squared_distance_3_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/squared_distance_3_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/squared_distance_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/squared_distance_3_0.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Envelope_diagram_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Env_default_diagram_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/envelope_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Envelope_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Envelope_2/Env_divide_and_conquer_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Envelope_2/Env_divide_and_conquer_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/envelope_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Envelope_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Envelope_3/Envelope_pm_dcel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Envelope_3/Envelope_element_visitor_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Envelope_3/Env_plane_traits_3_functions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Envelope_3/Envelope_overlay_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Envelope_3/Envelope_diagram_on_surface_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Envelope_3/Envelope_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Envelope_3/Envelope_overlay_functor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Envelope_3/Envelope_divide_and_conquer_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Envelope_3/set_dividors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Env_triangle_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Env_surface_data_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Env_plane_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Env_tracing_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Env_sphere_traits_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Static_filtered_predicate.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Filtered_kernel -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Filtered_kernel/Cartesian_coordinate_iterator_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Filtered_kernel/Cartesian_coordinate_iterator_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Epic_converter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Filtered_predicate_with_state.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Filtered_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Lazy.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_profiler.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Filtered_kernel_fwd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Robust_construction.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Filtered_predicate.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Lazy_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Filtered_construction.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Static_filter_error.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Angle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Coplanar_side_of_bounded_circle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Compare_squared_radius_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Power_side_of_oriented_power_sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Equal_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Collinear_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Compare_weighted_squared_radius_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Static_filters.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Side_of_oriented_sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Do_intersect_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Is_degenerate_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Compare_y_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Compare_y_at_x_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Equal_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Coplanar_orientation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Compare_x_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Do_intersect_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Side_of_oriented_circle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Orientation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Orientation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/tools.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Generalized_map_group_functors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Generalized_map_sewable.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Generalized_map_internal_functors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Generalized_map_operations.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Generalized_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Generalized_map_storages.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Generalized_map_save_load.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GMap_cell_const_iterators.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GMap_cell_iterators.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GMap_dart_const_iterators.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GMap_dart_iterators.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Generalized_map_iterators_base.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/random_selection.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/random_convex_set_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Random_convex_set_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/point_generators_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Random_polygon_2_sweep.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/random_convex_hull_in_disc_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/generators.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/random_polygon_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Random_polygon_traits_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Generic_random_point_generator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/point_generators_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/point_generators_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Combination_enumerator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Random_convex_hull_traits_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Geomview_stream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Geomview_stream_impl.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/auto_link -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/auto_link/Qt.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Buffer_for_vao.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/export -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/export/Qt.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_const_decorator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_iterator_adaptor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_vector.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_face_min_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/halfedgeDS_cut_component.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_vertex_max_base_with_id.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_items_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_decorator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_halfedge_min_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_default.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_vertex_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_vertex_min_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyhedron_items_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_list.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_face_max_base_with_id.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_items_decorator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_min_items.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/halfedge_graph_traits_HalfedgeDS.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_HalfedgeDS.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_HalfedgeDS_default.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/halfedgeds_connected_components.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_face_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_halfedge_max_base_with_id.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/HalfedgeDS_halfedge_base.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Handle_hash_function.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Unique_hash_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Tools -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Tools/chained_map.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Heat_method_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Heat_method_3/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Heat_method_3/internal/Intrinsic_Delaunay_triangulation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Heat_method_3/internal/V2V.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Heat_method_3/Surface_mesh_geodesic_distances_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous_converter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Simple_homogeneous.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/function_objects.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/ConicHPA2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/Iso_cuboidH3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/DirectionH3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/LineH2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/CircleH2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/predicates_on_pointsH2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/PointH2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/VectorH3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/PointH3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/Aff_transformationH2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/RayH3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/VectorH2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/basic_constructionsH2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/Weighted_point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/DirectionH2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/Iso_rectangleH2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/Homogeneous_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/SphereH3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/predicates_on_directionsH2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/predicates_on_pointsH3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/distance_predicatesH3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/Weighted_point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/Aff_transformationH3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/distance_predicatesH2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/Data_accessorH2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/PlaneH3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous/basic_constructionsH3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Exact_complex.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Hyperbolic_Delaunay_triangulation_traits_2_functions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hyperbolic_Delaunay_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hyperbolic_triangulation_face_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hyperbolic_Delaunay_triangulation_CK_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hyperbolic_Delaunay_triangulation_traits_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/extremal_polygon_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Largest_empty_iso_rectangle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Extremal_polygon_traits_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyhedron_3_fwd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh/Surface_mesh_fwd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/gpl_package_list.txt -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Scale_space_reconstruction_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing/orientation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing/collision_detection.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing/connected_components.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing/distance.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing/Compute_normal.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing/measure.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing/locate.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing/detect_features.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing/core.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing/predicate.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing/corefinement.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing/miscellaneous.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing/meshing_hole_filling.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing/repair.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygonal_surface_reconstruction.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/TDS_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Nef_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Spatial_searching.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polyline_simplification_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Stream_lines_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Minkowski_sum_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polygon_mesh_processing.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/README.md -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Envelope_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Surface_mesh_segmentation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Surface_mesh_approximation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/SearchStructures.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Surface_mesher.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Segment_Delaunay_graph_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Straight_skeleton_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Surface_mesh_simplification.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Convex_hull_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Optimal_transportation_reconstruction_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Mesh_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Interval_skip_list.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Advancing_front_surface_reconstruction.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Circular_kernel_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Circular_kernel_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/generate_files.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Point_set_processing_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Surface_mesh_deformation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Snap_rounding_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Ridges_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Inscribed_areas.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Point_set_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Minkowski_sum_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Nef_S2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Boolean_set_operations_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Three.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Voronoi_diagram_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Surface_mesh_shortest_path.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Hyperbolic_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/TDS_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Classification.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Periodic_2_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/AABB_tree.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Triangulation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Convex_hull_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/QP_solver.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Point_set_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Triangulation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Surface_mesh_skeletonization.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polytope_distance_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Heat_method_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Convex_decomposition_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Convex_hull_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Periodic_3_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Apollonius_graph_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Visibility_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/lgpl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Partition_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Interpolation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Alpha_shapes_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Barycentric_coordinates_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Matrix_search.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/GraphicsView.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Skin_surface_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Shape_detection.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Surface_mesh_parameterization.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Arrangement_on_surface_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Envelope_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Jet_fitting_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Principal_component_analysis.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Polyhedron.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/gpl.h.in -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Periodic_3_triangulation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Cone_spanners_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Bounding_volumes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Nef_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Surface_sweep_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Segment_Delaunay_graph_Linf_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Poisson_surface_reconstruction_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Alpha_shapes_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Surface_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Periodic_4_hyperbolic_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Set_movable_separability_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license/Box_intersection_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/gl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian_converter_fwd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/version_macros.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/version.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/config.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/MSVC_compiler_config.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/license.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/stddef.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/use.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/enable_warnings.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/auto_link -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/auto_link/auto_link.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/auto_link/CGAL.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/auto_link/ImageIO.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/auto_link/CORE.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/tss.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/atomic.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/glu.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/mutex.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/deprecation_warning.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/disable_deprecation_warnings_and_errors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/enable_third_party_libraries.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/export -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/export/CGAL.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/export/helpers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/disable_warnings.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_traits_fwd.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/iterator -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/iterator/counting_iterator.hpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/iterator/transform_iterator.hpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/bimap -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/bimap/multiset_of.hpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/bimap.hpp -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/natural_neighbor_coordinates_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/surface_neighbors_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/constructions -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/constructions/constructions_for_voronoi_intersection_cartesian_2_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Interpolation_gradient_fitting_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Interpolation_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/interpolation_functions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/regular_neighbor_coordinates_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_intersection_2_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Interpolation -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Interpolation/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Interpolation/internal/helpers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/surface_neighbor_coordinates_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates/predicates_for_voronoi_intersection_cartesian_2_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/sibson_gradient_fitting.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/natural_neighbor_coordinates_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/intersection_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Circle_2_Point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Line_2_Triangle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Circle_2_Iso_rectangle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Point_2_Triangle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Iso_rectangle_2_Line_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Bbox_2_Line_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Point_2_Ray_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Circle_2_Line_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Point_2_Segment_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Segment_2_Triangle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Line_2_Ray_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Line_2_Line_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Iso_rectangle_2_Triangle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Bbox_2_Point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Ray_2_Triangle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Triangle_2_Triangle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Bbox_2_Ray_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Point_2_Point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Ray_2_Ray_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Iso_rectangle_2_Ray_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Iso_rectangle_2_Segment_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Circle_2_Circle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Bbox_2_Circle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Line_2_Point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/internal/Straight_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/internal/Triangle_2_Triangle_2_do_intersect_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/internal/Triangle_2_Triangle_2_intersection_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Iso_rectangle_2_Point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Ray_2_Segment_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Line_2_Segment_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Segment_2_Segment_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_2/Iso_rectangle_2_Iso_rectangle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersection_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersection_traits.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/intersections.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/intersection_3_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Line_3_Line_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Bbox_3_Sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Iso_cuboid_3_Ray_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Plane_3_Ray_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Iso_cuboid_3_Triangle_3_intersection.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Triangle_3_Ray_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Triangle_3_Plane_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/bbox_intersection_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Bbox_3_Ray_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Triangle_3_Triangle_3_intersection.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Triangle_3_Segment_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Bbox_3_Iso_cuboid_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Bbox_3_Line_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Triangle_3_Triangle_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Iso_cuboid_3_Ray_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Bbox_3_Sphere_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Bbox_3_Segment_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Bbox_3_Bbox_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Iso_cuboid_3_Segment_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Bbox_3_Plane_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Triangle_3_Line_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Triangle_3_Sphere_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Bbox_3_Triangle_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Iso_cuboid_3_Triangle_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Tetrahedron_3_Unbounded_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Tetrahedron_3_Bounded_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Triangle_3_Ray_3_intersection.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/intersection_3_1_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Triangle_3_Line_3_intersection.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Triangle_3_Segment_3_intersection.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/internal/Iso_cuboid_3_Sphere_3_do_intersect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Sphere_3_Tetrahedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Line_3_Point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Tetrahedron_3_Tetrahedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Iso_cuboid_3_Plane_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Bbox_3_Plane_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Ray_3_Segment_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Line_3_Plane_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Segment_3_Segment_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Iso_cuboid_3_Point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Plane_3_Segment_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Plane_3_Tetrahedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Plane_3_Sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Line_3_Tetrahedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Point_3_Triangle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Point_3_Segment_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Iso_cuboid_3_Segment_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Line_3_Segment_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Bbox_3_Line_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Triangle_3_Triangle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Plane_3_Triangle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Bbox_3_Iso_cuboid_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Segment_3_Tetrahedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Segment_3_Triangle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Bbox_3_Triangle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Ray_3_Sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Ray_3_Ray_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Tetrahedron_3_Triangle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Bbox_3_Segment_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Iso_cuboid_3_Tetrahedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Point_3_Tetrahedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Line_3_Triangle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Point_3_Sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Point_3_Point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Line_3_Sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Point_3_Ray_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Bbox_3_Point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Bbox_3_Bbox_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Line_3_Ray_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Ray_3_Triangle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Bbox_3_Ray_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Ray_3_Tetrahedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Sphere_3_Sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Segment_3_Sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Iso_cuboid_3_Sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Iso_cuboid_3_Iso_cuboid_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Iso_cuboid_3_Line_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Sphere_3_Triangle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Bbox_3_Tetrahedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Iso_cuboid_3_Triangle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Plane_3_Point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersections_3/Plane_3_Plane_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/intersection_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Intersection_traits_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Interval_skip_list_interval.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Interval_skip_list.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Level_interval.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Test -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Test/_test_interval_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Test/_test_bigfloat_interval_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Test/_test_convert_to_bfi.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/convert_to_bfi.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Bigfloat_interval_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Interval_traits.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/VRML_2_ostream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Inventor_ostream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/VRML_1_ostream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Alpha_shape_3_VRML_2_ostream.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Monge_via_jet_fitting.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Direction_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Vector_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/kernel_to_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_structural_filtering_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/aff_transformation_tags.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Weighted_point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/mpl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/Same_uncertainty.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/Type_equality_wrapper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/global_functions_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/global_functions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/global_functions_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/global_functions_internal_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/solve.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/Type_mapper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/interface_macros.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/Dimension_utils.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/Conic_misc.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/global_functions_internal_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/Return_base_tag.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/Wutils.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/function_objects.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel/hash_functions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/distance_predicates_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates_on_points_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Exact_predicates_inexact_constructions_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Origin.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Direction_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Bbox_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/basic_constructions_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Plane_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/determinant.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/enum.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Exact_predicates_exact_constructions_kernel_with_kth_root.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Bbox_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Is_a_predicate.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Has_conversion.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates_on_lines_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Exact_kernel_selector.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/cartesian_homogeneous_conversion.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Line_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Vector_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates_on_points_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/kernel_basic.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Weighted_point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Aff_transformation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/rational_rotation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Iso_rectangle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Ray_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Projection_traits_xz_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/representation_tags.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Ray_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Dimension.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Projection_traits_xy_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Origin_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Exact_predicates_exact_constructions_kernel_with_sqrt.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/aff_transformation_tags_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Iso_cuboid_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/kernel_config.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Line_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Has_boolean_tags.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Projection_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/basic.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Exact_predicates_exact_constructions_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/kernel_assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/user_classes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_checker.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Tetrahedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/basic_constructions_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Conic_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/distance_predicates_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Aff_transformation_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates/sign_of_determinant.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/functions_on_enums.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Enum_converter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/basic_classes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Exact_predicates_exact_constructions_kernel_with_root_of.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Projection_traits_yz_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Referenced_argument.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Linear_algebraCd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/constructions_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Filtered_kernel_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Homogeneous_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Linear_algebraHd_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/DirectionHd_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/HyperplaneHd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/VectorCd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/DirectionCd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Point_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Pair_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Sphere_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Ray_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Matrix__.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/VectorCd_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Line_d_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Line_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/HyperplaneCd_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Aff_transformationHd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/interface_macros_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/function_objects.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Hyperplane_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Interval_linear_algebra.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/VectorHd_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/function_objectsHd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/HyperplaneCd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Aff_transformationCd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Iso_box_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/VectorHd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Cartesian_converter_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/PointHd_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/simple_objects.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/intersection_objectsCd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Interface_classes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/intersection_objects_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/HyperplaneHd_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/debug.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Vector__.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/intersection_objectsHd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Kernel_classesHd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Kernel_classesCd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/function_objectsCd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Direction_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Aff_transformation_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Cartesian_const_iterator_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Tuple_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/DirectionHd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/PointCd_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/PointCd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Linear_algebraCd_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/DirectionCd_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Segment_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/Vector_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kernel_d/PointHd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Linear_algebraHd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/simple_transformations_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/intersections_d.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/LEDA_basic.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Linear_cell_complex_constructors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cell_attribute_with_point_and_id.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Linear_cell_complex_for_combinatorial_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CMap_linear_cell_complex_storages.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Linear_cell_complex_bgl_min_items.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Linear_cell_complex_operations.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Linear_cell_complex_base.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Linear_cell_complex_for_combinatorial_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_Linear_cell_complex_for_combinatorial_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Linear_cell_complex_incremental_builder.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Linear_cell_complex_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Linear_cell_complex_for_bgl_combinatorial_map_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/draw_linear_cell_complex.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Linear_cell_complex.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GMap_linear_cell_complex_storages.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Linear_cell_complex_for_generalized_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Linear_cell_complex_min_items.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cell_attribute_with_point.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Transform_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/sorted_matrix_search.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sorted_matrix_search_traits_adaptor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian_matrix.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/monotone_matrix_search.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Dynamic_matrix.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_mesh_area_criteria_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Filter_circulator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_mesh_size_criteria_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_conformer_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2/Uniform_sizing_field_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2/Lloyd_move_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2/Sizing_field_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2/Clusters.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2/Face_badness.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2/Refine_edges_with_clusters.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2/Refine_edges_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2/Lipschitz_sizing_field_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2/Refine_edges.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2/Refine_faces.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2/Mesh_global_optimizer_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2/Mesh_sizing_field.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2/Do_not_refine_edges.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_mesh_criteria_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_mesher_no_edge_refinement_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_poly.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/write_vtu.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_mesh_local_size_criteria_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Constrained_Delaunay_triangulation_face_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_mesh_vertex_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/lloyd_optimize_mesh_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/container_fwd_fixed.hpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Constrained_voronoi_diagram_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_mesh_face_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_mesher_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_cell_base_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Mesh_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Mesh_3/helpers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Mesh_3/check_weights.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Mesh_3/get_index.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Mesh_3/Graph_manipulations.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Mesh_3/indices_management.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Mesh_3/Handle_IO_for_pair_of_int.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Mesh_3/Boundary_of_subdomain_of_complex_3_in_triangulation_3_to_off.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_edge_criteria_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Labeled_mesh_domain_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangle_accessor_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_cell_criteria_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyhedral_mesh_domain_with_features_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_constant_domain_field_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Odt_move.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Refine_cells_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Worksharing_data_structures.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/mesh_standard_criteria.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Null_exuder_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/experimental -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/experimental/Get_facet_patch_id.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/experimental/Lipschitz_sizing_parameters.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/experimental/Facet_topological_criterion_with_adjacency.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/experimental/Sizing_field_with_aabb_tree.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/experimental/AABB_filtered_projection_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/experimental/Get_curve_index.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/experimental/Sizing_field_minimum.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/experimental/Lipschitz_sizing_polyhedron.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/experimental/Lipschitz_sizing_experimental.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/utilities.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/polylines_to_protect.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/vertex_perturbation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Lloyd_move.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Has_features.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Cell_criteria_visitor_with_balls.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Protect_edges_sizing_field.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/C3T3_helpers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Null_global_optimizer_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Slivers_exuder.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Triangulation_helpers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Detect_polylines_in_polyhedra.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Refine_tets_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/search_for_connected_components_in_labeled_image.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Image_to_labeled_function_wrapper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Facet_on_same_surface_criterion.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Detect_polylines_in_polyhedra_fwd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Refine_facets_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/radius_ratio.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Concurrent_mesher_config.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/min_dihedral_angle.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/mesh_standard_cell_criteria.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Facet_criteria_visitor_with_balls.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/squared_distance_Point_3_Triangle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Implicit_surface_mesher_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Profile_counter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Triangulation_sizing_field.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Mesh_complex_3_in_triangulation_3_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Mesher_level_default_implementations.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Mesher_level.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/io_signature.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/tet_soup_to_c3t3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Robust_intersection_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Triangle_accessor_primitive.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Uniform_sizing_field.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/initialize_triangulation_from_labeled_image.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/sliver_criteria.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Sliver_perturber.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Slivers_exuder_cell_attributes_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/config.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/mesh_standard_facet_criteria.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/parameters_defaults.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/polyhedral_to_labeled_function_wrapper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Profiling_tools.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Robust_intersection_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Mesh_surface_cell_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Mesher_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/dihedral_angle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Polyline_with_context.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Dump_c3t3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Mesh_global_optimizer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Null_perturber_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Refine_facets_manifold_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Mesh_sizing_field.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Is_mesh_domain_field_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Sizing_grid.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_criteria_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyhedral_complex_mesh_domain_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/optimize_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_polyhedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_triangulation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_domain_with_polyline_features_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/exude_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Implicit_mesh_domain_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/perturb_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Gray_image_mesh_domain_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_error_code.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Labeled_image_mesh_domain_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Compact_mesh_cell_base_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_tetgen.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_maya.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/output_to_vtu.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Complex_3_in_triangulation_3_to_vtk.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/facets_in_complex_3_to_triangle_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_binary_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_avizo.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_medit.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_facet_topology.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_vertex_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Meshes -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Meshes/Filtered_deque_container.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Meshes/Filtered_multimap_container.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/make_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/remove_far_points_in_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/refine_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/lloyd_optimize_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Implicit_to_labeling_function_wrapper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyhedral_mesh_domain_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/odt_optimize_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_complex_3_in_triangulation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_facet_criteria_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesher_level_visitors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesher_level_default_implementations.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Meshes -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Meshes/Double_map_container.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Meshes/Triangulation_mesher_level_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Meshes/Simple_map_container.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Meshes/Filtered_queue_container.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Meshes/Triangulation_mesher_level_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Meshes/Simple_set_container.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Meshes/Simple_queue_container.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_optimization_return_code.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_2/Output_stream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Double_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesher_level.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_nop_decomposition_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/approximated_offset_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Small_side_angle_bisector_decomposition_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_vertical_decomposition_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/offset_polygon_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/Arr_labeled_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/Approx_offset_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/Minkowski_sum_conv_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/Decomposition_strategy_adapter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/AABB_collision_detector_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/AABB_node_with_join.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/Minkowski_sum_decomp_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/AABB_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/Exact_offset_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/AABB_traversal_traits_with_join.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/Labels.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/Union_of_curve_cycles_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/Hole_filter_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/Union_of_cycles_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/Polygon_convex_decomposition.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/AABB_tree_with_join.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/Union_of_segment_cycles_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/AABB_segment_2_primitive.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/Offset_decomp_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/Minkowski_sum_by_reduced_convolution_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_2/Offset_conv_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_convex_decomposition_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_triangulation_decomposition_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/minkowski_sum_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/minkowski_sum_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_3/bipartite_nary_union_sorted_combined.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_3/PointMark.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_3/Gaussian_map_to_nef_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Minkowski_sum_3/Gaussian_map.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Modifier_base.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Modular_arithmetic -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Modular_arithmetic/Residue_type.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/primes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Modular_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Residue.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_polyhedron_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Filtered_extended_homogeneous.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Nef_polyhedron_2_PS_stream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Bounded_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Is_extended_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Extended_homogeneous.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Extended_cartesian.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_polynomial_fwd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/PM_const_decorator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/Object_index.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/PM_point_locator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/PM_explorer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/Segment_overlay_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/Line_to_epoint.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/PM_overlayer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/Bounding_box_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/debug.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/Object_handle.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/HDS_items.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/geninfo.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/Polynomial_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/PM_io_parser.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/PM_checker.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/PM_decorator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/Constrained_triang_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/iterator_tools.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/PM_persistent_PL.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/gen_point_location.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_2/Polynomial.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/sweep_observer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_polynomial.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/generic_sweep.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_polyhedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_nary_union_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SHalfloop.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_simplify.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_external_structure.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_FM_decorator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_const_decorator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/bounded_side_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_iteration.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_constructor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/polygon_mesh_to_nef_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Halfedge.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Bounding_box_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/OGL_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/binop_intersection_tests.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_decorator_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_point_locator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_structure.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/ID_support_handler.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_items.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/quotient_coordinates_to_homogeneous_point.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_SM_explorer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Volume.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_k3_tree_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Halffacet.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Exact_triangulation_euclidean_traits_yz_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_list.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Default_items.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SHalfedge.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Exact_triangulation_euclidean_traits_xy_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Vertex.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_SM_overlayer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Infimaximal_box.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Combine_with_halfspace.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SM_visualizor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Mark_bounded_volumes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_io_parser.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Exact_triangulation_euclidean_traits_xz_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_SM_visualizor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_intersection.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/K3_tree.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/shell_to_nef_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SFace.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Binary_operation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/vertex_cycle_to_nef_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_decorator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_indexed_items.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Pluecker_line_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Nef_box.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/SNC_sphere_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_3/Edge_edge_overlay.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/convert_nef_polyhedron_to_polygon_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_nary_intersection_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OFF_to_nef_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/normal_vector_newell_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Nef_polyhedron_iostream_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/SM_decorator_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/SM_triangulator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/Sphere_circle.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/SM_list.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/SM_point_locator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/SM_iteration.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/Normalizing.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/Sphere_geometry.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/SM_io_parser.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/ID_support_handler.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/Sphere_segment.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/Generic_handle_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/SM_checker.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/SM_items.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/SM_constrained_triang_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/OGL_base_object.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/SM_decorator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/Sphere_geometry_OGL.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/SM_const_decorator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/Sphere_triangle.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/sphere_predicates.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/SM_visualizor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/Sphere_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/Sphere_direction.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/leda_sphere_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/SM_overlayer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_S2/Sphere_point.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nef_polyhedron_S2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Cartesian_static_filters.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Dimension_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/KernelD_converter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Cartesian_change_FT.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/functor_properties.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Wrapper -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Wrapper/Cartesian_wrap.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Wrapper/Vector_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Wrapper/Ref_count_obj.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Wrapper/Weighted_point_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Wrapper/Segment_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Wrapper/Point_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Wrapper/Sphere_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Wrapper/Hyperplane_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Kernel_d_interface.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Coaffine.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Filtered_predicate2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Cartesian_per_dimension.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/function_objects_cartesian.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Cartesian_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/utils.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Cartesian_filter_K.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Kernel_object_converter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/static_int.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/store_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Vector -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Vector/sse2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Vector/v2int.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Vector/array.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Vector/determinant_of_iterator_to_vectors_from_vectors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Vector/determinant_of_vectors_small_dim_internal.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Vector/avx4.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Vector/determinant_of_vectors_small_dim.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Vector/determinant_of_iterator_to_points_from_iterator_to_vectors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Vector/determinant_of_iterator_to_points_from_points.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Vector/determinant_of_points_from_vectors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Vector/mix.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Vector/vector.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/functor_tags.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/LA_eigen -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/LA_eigen/constructors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/LA_eigen/LA.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Define_kernel_types.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Cartesian_filter_NT.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Lazy_cartesian.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Kernel_2_interface.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Cartesian_complete.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Cartesian_LA_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Cartesian_LA_functors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Types -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Types/Weighted_point.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Types/Segment.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Types/Ray.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Types/Sphere.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Types/Aff_transformation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Types/Hyperplane.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Types/Iso_box.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Types/Line.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NewKernel_d/Kernel_3_interface.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/argument_swaps.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Epick_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Epeck_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/typeset.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/determinant_of_vectors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/iterator_from_indices.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension_fwd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/leda_coercion_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension/Algebraic_structure_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension/Sqrt_extension_type.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension/Fraction_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension/Chinese_remainder_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension/io.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension/Scalar_factor_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension/Eigen_NumTraits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension/Real_embeddable_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension/convert_to_bfi.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension/Get_arithmetic_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension/Algebraic_extension_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension/Wang_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension/Modular_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension/Coercion_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Interval_nt.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/test_FPU_rounding_mode_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/long_double.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/utils.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/mpq_class.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/leda_real.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/MP_Float_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/mpfi_coercion_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/simplest_rational_in_interval.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/leda_rational.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Exact_integer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost_mp.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Number_type_checker.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/gmp.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/int.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE_BigRat.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mpzf.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Quotient.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Exact_type_selector.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Test -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Test/test_root_of_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Gmpz.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/to_rational.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Gmpfr.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/double.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/float.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/FPU_gcc_i386.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/constant.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/leda_bigfloat.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE_Expr.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Lazy_exact_nt.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE_BigFloat.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE_coercion_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Root_of_traits_specializations.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Gmpzf.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Quotient_fwd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Root_of_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/sse2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sqrt_extension.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Number_types -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Number_types/internal_functions_comparison_root_of_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/gmpxx_coercion_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/mpz_class.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GMP -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GMP/Gmpfi_type_static.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GMP/Gmpq_type.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GMP/Gmpfr_type.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GMP/Gmpzf_type.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GMP/Gmpz_type.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GMP/Gmpfr_type_static.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GMP/Gmpfi_type.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Gmpq.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CORE_BigInt.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Exact_rational.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/number_type_basic.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/NT_converter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/long_long.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/FPU_msvc.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IEEE_754_unions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Gmp_coercion_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/mpfr_coercion_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/number_type_config.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/gmpxx.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/FPU_gcc_i386_sse2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/FPU_extension.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Interval_arithmetic.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/leda_bigfloat_interval.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/utils_classes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/MP_Float.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Counted_number.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/leda_integer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Exact_algebraic.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Gmpfi.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/FPU.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Interval_arithmetic_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/known_bit_size_integers.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OpenNL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OpenNL/sparse_matrix.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OpenNL/preconditioner.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OpenNL/conjugate_gradient.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OpenNL/blas.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OpenNL/linear_solver.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OpenNL/bicgstab.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OpenNL/full_vector.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OTR_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OTR_2/Reconstruction_face_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OTR_2/Sample.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OTR_2/Reconstruction_vertex_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OTR_2/Reconstruction_edge_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OTR_2/Reconstruction_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/OTR_2/Cost.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimal_transportation_reconstruction_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation/Access_coordinates_begin_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation/Access_dimension_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation/Construct_point_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation/debug.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation/basic.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation/assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation/Access_dimension_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation/Access_coordinates_begin_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation/Access_coordinates_begin_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation/Construct_point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation/Construct_point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation/Access_dimension_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation_d_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation_d_traits_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Optimisation_d_traits_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/is_y_monotone_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/polygon_function_objects.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/partition_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_is_valid_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/partition_is_valid_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_traits_adapter_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Indirect_edge_compare.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Partition_opt_cvx_edge.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/partition_optimal_convex_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Indirect_not_less_yx_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Triangulation_indirect_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/is_degenerate_polygon_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Vertex_visibility_graph_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Turn_reverser.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Point_pair_less_xy_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Rotation_tree_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Rotation_tree_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Iterator_list.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/partition_approx_convex_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/partition_y_monotone_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Circulator_pair.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Vertex_visibility_graph_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Partition_opt_cvx_diagonal_list.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Partition_vertex_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Segment_less_yx_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/partition_greene_approx_convex_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Partition_traits_2_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Matrix.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Rotation_tree_node_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Indirect_less_xy_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/partition_assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Partitioned_polygon_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Partition_2/Partition_opt_cvx_vertex.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Periodic_2_side_of_oriented_circle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Periodic_2_orientation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_2_triangulation_filtered_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_2_Delaunay_triangulation_statically_filtered_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Functor_with_offset_points_adaptor_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_2_Delaunay_triangulation_filtered_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_2_triangulation_statically_filtered_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_2_construct_point_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_2_triangulation_iterators_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_2_triangulation_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_2_offset_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_2_Delaunay_triangulation_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_2_triangulation_dummy_12.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_2_triangulation_vertex_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_2_triangulation_hierarchy_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_2_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_2_Delaunay_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_2_triangulation_face_base_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/optimize_periodic_3_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_mesh_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_mesh_3/Protect_edges_sizing_field.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_mesh_3/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_mesh_3/IO/File_medit.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_mesh_3/config.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_mesh_triangulation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/make_periodic_3_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/refine_periodic_3_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_function_wrapper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Implicit_to_labeled_subdomains_function_wrapper.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_triangulation_ds_cell_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/periodic_3_triangulation_3_io.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_offset_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_Delaunay_triangulation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_triangulation_ds_vertex_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_triangulation_hierarchy_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_triangulation_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_triangulation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_regular_triangulation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_regular_triangulation_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_3_Delaunay_triangulation_traits_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_3_Delaunay_triangulation_remove_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_3_triangulation_dummy_36.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Functor_with_offset_weighted_points_adaptor_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Robust_periodic_weighted_circumcenter_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_3_construct_point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_3_regular_triangulation_remove_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Functor_with_offset_points_adaptor_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_3_Delaunay_triangulation_statically_filtered_traits_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Periodic_3_power_side_of_oriented_power_sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Periodic_3_side_of_oriented_sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_filters/Periodic_3_orientation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_3_triangulation_filtered_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_3_construct_weighted_point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_3_triangulation_iterators_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_3_triangulation_statically_filtered_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_3_Delaunay_triangulation_filtered_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_3_regular_triangulation_filtered_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_3_triangulation_remove_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_3_regular_triangulation_dummy_288.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/canonicalize_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_3_regular_triangulation_statically_filtered_traits_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_4_hyperbolic_Delaunay_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hyperbolic_octagon_translation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_4_hyperbolic_triangulation_face_base_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Hyperbolic_octagon_translation_word.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Hyperbolic_octagon_translation_matrix.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Periodic_4_hyperbolic_triangulation_dummy_14.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Dehn_hyperbolic_octagon_translation_word.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_4_hyperbolic_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_4_hyperbolic_triangulation_vertex_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Periodic_4_hyperbolic_Delaunay_triangulation_traits_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/range_search_delaunay_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_set_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/nearest_neighbor_delaunay_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/compare_vertices.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_set_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/draw_point_set_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_set_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_set_3/IO.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/point_set_processing_assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/jet_estimate_normals.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_with_normal_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/compute_average_spacing.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/structure_point_set.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/random_simplify_point_set.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/edge_aware_upsample_point_set.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/estimate_scale.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/radial_orient_normals.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/vcm_estimate_edges.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/mst_orient_normals.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/jet_smooth_point_set.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/bilateral_smooth_point_set.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/write_off_points.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/read_xyz_points.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/write_las_points.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/read_las_points.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/write_ply_points.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/read_off_points.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/write_xyz_points.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/read_ply_points.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/grid_simplify_point_set.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/hierarchy_simplify_point_set.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/vcm_estimate_normals.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/remove_outliers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_set_processing_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_set_processing_3/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_set_processing_3/internal/neighbor_query.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_set_processing_3/internal/Parallel_callback.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_set_processing_3/internal/Search_traits_vertex_handle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_set_processing_3/internal/Rich_grid.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_set_processing_3/internal/Voronoi_covariance_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_set_processing_3/internal/Voronoi_covariance_3/voronoi_covariance_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_set_processing_3/internal/Voronoi_covariance_3/voronoi_covariance_sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/wlop_simplify_and_regularize_point_set.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/pca_estimate_normals.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Poisson_implicit_surface_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/poisson_refine_triangulation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Poisson_reconstruction_function.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/surface_reconstruction_points_assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Reconstruction_triangulation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Poisson_implicit_surface_oracle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Robust_circumcenter_filtered_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Lightweight_vector_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mesh_3/Poisson_refine_cells_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Poisson_mesh_cell_criteria_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/poisson_surface_reconstruction.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/output_surface_facets_to_triangle_soup.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_with_holes_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_2_algorithms.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_2/Polygon_2_edge_circulator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_2/Polygon_2_edge_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_2/Polygon_2_vertex_circulator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_2/Polygon_2_algorithms_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_2/polygon_assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_2/Polygon_2_simplicity.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_2/Polygon_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/draw_polygon_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/draw_polygon_with_holes_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/General_polygon_with_holes_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Side_of_triangle_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/polygon_mesh_processing.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/triangulate_faces.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/transform.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/smooth_shape.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Corefinement -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Corefinement/intersection_of_coplanar_triangles_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Corefinement/intersection_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Corefinement/Face_graph_output_builder.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Corefinement/face_graph_utils.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Corefinement/Output_builder_for_autorefinement.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Corefinement/Visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Corefinement/intersection_nodes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Corefinement/intersect_triangle_and_segment_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Corefinement/predicates.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Corefinement/Intersection_type.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Corefinement/intersection_callbacks.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/AABB_traversal_traits_with_transformation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Smoothing -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Smoothing/ceres_support.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Smoothing/mesh_smoothing_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Smoothing/curvature_flow_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Smoothing/smoothing_evaluation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Polygon_mesh_slicer -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Polygon_mesh_slicer/Axis_parallel_plane_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Polygon_mesh_slicer/Traversal_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Isotropic_remeshing -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Isotropic_remeshing/remesh_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Isotropic_remeshing/AABB_filtered_projection_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/named_function_params.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/named_params_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/repair_extra.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/mesh_to_point_set_hausdorff_distance.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Snapping -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Snapping/snap.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Hole_filling -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Hole_filling/Triangulate_hole_polyline.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Hole_filling/experimental -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Hole_filling/experimental/experimental_code.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Hole_filling/Triangulate_hole_polygon_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Hole_filling/do_not_use_DT3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/fair_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Side_of_triangle_mesh -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Side_of_triangle_mesh/Ray_3_Triangle_3_traversal_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/Side_of_triangle_mesh/Point_inside_vertical_ray_cast.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/do_no_use_CDT2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/internal/refine_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/remesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/polygon_soup_to_polygon_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/smooth_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/refine.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/triangulate_hole.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/self_intersections.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/Weights.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/intersection.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/bbox.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/border.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/distance.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/shape_predicates.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/extrude.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/orientation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/orient_polygon_soup.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/detect_features.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/connected_components.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/compute_normal.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/locate.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/corefinement.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/repair_polygon_soup.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/fair.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/measure.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/merge_border_vertices.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/clip.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/stitch_borders.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/random_perturbation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_processing/repair.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Rigid_triangle_mesh_collision_detection.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_mesh_slicer.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygonal_surface_reconstruction.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/parameters.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/alpha_shape_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/point_set_with_planes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/compute_confidences.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/hypothesis.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyhedron_3_to_lcc.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyhedron_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyhedron_items_with_id_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_Polyhedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Polyhedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/halfedge_graph_traits_Polyhedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Polyhedron_3_time_stamp.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Polyhedron_3_features.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyhedron_traits_with_normals_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyhedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyhedron_incremental_builder_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyhedron_min_items_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/polyhedron_cut_plane_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyhedron_copy_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/draw_polyhedron.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Polyhedron_VRML_1_ostream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Polyhedron_VRML_2_ostream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Polyhedron_iostream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/generic_print_polyhedron.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/STL_writer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Polyhedron_builder_from_STL.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/print_VRML_1.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Polyhedron_scan_OFF.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/reader_helpers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/print_inventor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/print_OFF.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Polyhedron_inventor_ostream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/scan_OFF.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/OFF_reader.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/STL_reader.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/PLY_reader.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/print_VRML_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/PLY_writer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Polyhedron_geomview_ostream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/OBJ_reader.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/print_wavefront.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyline_simplification_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyline_simplification_2/Stop_below_count_threshold.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyline_simplification_2/Stop_below_count_ratio_threshold.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyline_simplification_2/simplify.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyline_simplification_2/Hybrid_squared_distance_cost.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyline_simplification_2/Vertex_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyline_simplification_2/Squared_distance_cost.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyline_simplification_2/Stop_above_cost_threshold.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polyline_simplification_2/Scaled_squared_distance_cost.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial_type_generator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/polynomial_utils.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Exponent_vector.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Test -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Test/_test_polynomial_traits_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial_traits_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/resultant.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/modular_gcd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/polynomial_gcd_ntl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/Interpolator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/determinant.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/sturm_habicht_sequence.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/Algebraic_structure_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/misc.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/bezout_matrix.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/Modular_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/modular_gcd_utcf_dfai.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/Scalar_factor_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/Cached_extended_euclidean_algorithm.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/Chinese_remainder_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/Degree.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/Get_arithmetic_kernel.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/modular_gcd_utils.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/modular_gcd_utcf_algorithm_M.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/prs_resultant.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/hgdelta_update.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/polynomial_gcd_implementations.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/Monomial_representation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/square_free_factorize.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/Polynomial_type.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/polynomial_gcd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/fwd.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/modular_filter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/Fraction_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/subresultants.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/Coercion_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polynomial/Real_embeddable_traits.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/all_furthest_neighbors_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Width_default_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polytope_distance_d_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polytope_distance_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Width_polyhedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/width_assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Width_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polytope_distance_d_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polytope_distance_d_traits_d.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/linear_least_squares_fitting_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/linear_least_squares_fitting_triangles_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/PCA_util.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/linear_least_squares_fitting_spheres_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/linear_least_squares_fitting_rectangles_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/linear_least_squares_fitting_tetrahedra_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/PCA_util_Eigen.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/linear_least_squares_fitting_circles_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/linear_least_squares_fitting_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/linear_least_squares_fitting_cuboids_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/linear_least_squares_fitting_points_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/linear_least_squares_fitting_points_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/linear_least_squares_fitting_triangles_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/linear_least_squares_fitting_segments_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/linear_least_squares_fitting_segments_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/barycenter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/bounding_box.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/centroid.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Timer_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Real_timer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Timer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Profile_counter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Memory_sizer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Real_timer_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Profile_timer.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Index_property_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/property_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Dynamic_property_map.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_models.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_options.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/Unbounded_direction.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/basic.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP_full_exact_pricing.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP_partial_filtered_pricing.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/functors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP_solver.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP_solver_nonstandardform_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP_exact_bland_pricing.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP_full_filtered_pricing.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP_functions_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP_solution_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP_solver_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP_solver_bounds_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/Initialization.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP_pricing_strategy.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP_basis_inverse.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP__partial_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP_basis_inverse_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP__filtered_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP_partial_exact_pricing.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/debug.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solver/QP__filtered_base_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_solution.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/QP_functions.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Random_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Random.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Umbilics.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/PolyhedralSurf_neighbors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Ridges.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Vertex2Data_Property_Map_with_std_map.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Iterator_transform.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Modifiable_priority_queue.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/transforming_pair_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Counting_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Complexity_tags.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/In_place_list.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Handle_for_virtual.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Iterator_range.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/algorithm.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/is_streamable.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/CC_safe_handle.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/result_of.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/min_max_n.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Uncertain.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/is_convertible.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sixtuple.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/N_step_adaptor_derived.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/function_objects.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Has_timestamp.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/hash_openmesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Default.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Iterator_project.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Spatial_lock_grid_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/array.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/assertions_behaviour.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Multiset.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/tags.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Handle_with_policy.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Time_stamper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circulator_project.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circulator_identity.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Has_member.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/demangle.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Handle_for.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/assertions_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Threetuple.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Random_access_adaptor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/multiset_assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/triangulation_assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/type_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Random_access_value_adaptor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Flattening_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/transforming_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/vector.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/value_type_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/exceptions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Object.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hidden_point_memory_policy.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/info_check.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Has_nested_type_Bare_point.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Has_member_visited.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/boost -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/boost/mutable_queue.hpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/boost/mutable_heap.hpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/boost/array_binary_tree.hpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/boost/function_property_map.hpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/copy_n.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Circulator_on_node.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Concatenate_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Compare_handles_with_or_without_timestamps.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Small_unordered_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hash_handles_with_or_without_timestamps.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Nested_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Fourtuple.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Concurrent_compact_container.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/utility.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Location_policy.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/functional.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/memory.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Twotuple.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/tuple.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Join_input_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Handle.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Inverse_index.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Skiplist.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/N_step_adaptor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Compact_container.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/thread.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cache.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/is_iterator.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Scale_space_reconstruction_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Scale_space_reconstruction_3/Advancing_front_mesher.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Scale_space_reconstruction_3/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Scale_space_reconstruction_3/internal/Auto_count.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Scale_space_reconstruction_3/Shape_construction_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Scale_space_reconstruction_3/Alpha_shape_mesher.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Scale_space_reconstruction_3/Weighted_PCA_smoother.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Scale_space_reconstruction_3/Jet_smoother.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Scale_space_surface_reconstruction_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Range_tree_k.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Range_segment_tree_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Range_tree_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Tree_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_tree_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Tree_assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Tree_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_tree_k.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_storage_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_site_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_vertex_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_filtered_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Triangulation_face_base_with_edges_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Infinite_edge_interior_conflict_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Voronoi_vertex_ring_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/basic.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Arrangement_enum.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Oriented_side_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Arrangement_type_non_intersecting_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Compare_x_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/in_place_edge_list.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Kernel_wrapper_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Construct_storage_site_with_info_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Are_parallel_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Predicates_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Basic_predicates_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Constructions_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Are_same_segments_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Finite_edge_interior_conflict_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Voronoi_vertex_sqrt_field_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Oriented_side_of_bisector_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Voronoi_vertex_sqrt_field_new_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Cartesian_converter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Segment_Delaunay_graph_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Filtered_traits_concept_check_tags.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Vertex_conflict_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Orientation_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Traits_wrapper_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Sqrt_extension_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Are_same_points_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Segment_Delaunay_graph_hierarchy_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Traits_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Is_degenerate_edge_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Voronoi_vertex_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Construct_storage_site_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Arrangement_type_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Compare_y_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_2/Filtered_traits_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_simple_storage_site_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_hierarchy_vertex_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_storage_site_with_info_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_face_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_hierarchy_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_simple_site_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_storage_site_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_storage_traits_with_info_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_hierarchy_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Orientation_Linf_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/basic.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Traits_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Oriented_side_of_bisector_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Vertex_conflict_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Voronoi_vertex_sqrt_field_new_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Segment_Delaunay_graph_Linf_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Basic_predicates_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Voronoi_vertex_ring_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Predicates_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Infinite_edge_interior_conflict_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Bisector_Linf.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Constructions_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Orientation_Linf_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Oriented_side_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Finite_edge_interior_conflict_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Filtered_traits_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Voronoi_vertex_C2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2/Segment_Delaunay_graph_Linf_hierarchy_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_Linf_filtered_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polychain_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Side_of_bounded_square_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Side_of_oriented_square_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Set_movable_separability_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Set_movable_separability_2/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Set_movable_separability_2/internal/Utils.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Set_movable_separability_2/internal/Circle_arrangment.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Set_movable_separability_2/Single_mold_translational_casting -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Set_movable_separability_2/Single_mold_translational_casting/top_edges.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Set_movable_separability_2/Single_mold_translational_casting/pullout_directions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Set_movable_separability_2/Single_mold_translational_casting/is_pullout_direction.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/deprecated -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/deprecated/Region_growing.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/deprecated/Shape_detection_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/Region_growing.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/Region_growing_on_point_set -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/Region_growing_on_point_set/Least_squares_plane_fit_sorting.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/Region_growing_on_point_set/Least_squares_line_fit_sorting.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/Region_growing_on_point_set/Sphere_neighbor_query.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/Region_growing_on_point_set/Least_squares_line_fit_region.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/Region_growing_on_point_set/Least_squares_plane_fit_region.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/Region_growing_on_point_set/K_neighbor_query.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/Region_growing_on_polygon_mesh -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/Region_growing_on_polygon_mesh/Least_squares_plane_fit_region.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/Region_growing_on_polygon_mesh/One_ring_neighbor_query.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/Region_growing_on_polygon_mesh/Least_squares_plane_fit_sorting.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/Region_growing_on_polygon_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/internal/property_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/internal/utils.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Region_growing/Region_growing_on_point_set.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Efficient_RANSAC.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Efficient_RANSAC -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Efficient_RANSAC/Efficient_RANSAC_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Efficient_RANSAC/Cone.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Efficient_RANSAC/Octree.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Efficient_RANSAC/Plane.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Efficient_RANSAC/Shape_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Efficient_RANSAC/property_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Efficient_RANSAC/Cylinder.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Efficient_RANSAC/Sphere.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Efficient_RANSAC/Torus.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection/Efficient_RANSAC/Efficient_RANSAC.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regularization -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regularization/regularize_planes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regularization.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Shape_detection.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_incremental_builder_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Union_of_balls_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/mesh_union_of_balls_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/marching_tetrahedra_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Skin_surface_quadratic_surface_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Skin_surface_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/make_skin_surface_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/triangulate_mixed_complex_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Skin_surface_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Compute_anchor_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Skin_surface_polyhedral_items_with_face_information.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Skin_surface_filtered_traits_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates/predicates_for_mixed_complex_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Marching_tetrahedra_observer_default_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Skin_surface_marching_tetrahedra_observer_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/mesh_skin_surface_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/subdivide_skin_surface_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/subdivide_union_of_balls_mesh_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/triangulate_power_diagram_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/make_union_of_balls_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Skin_surface_refinement_policy_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Marching_tetrahedra_traits_skin_surface_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Skin_surface_polyhedral_items_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Skin_surface_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulated_mixed_complex_observer_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Snap_rounding_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Snap_rounding_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Snap_rounding_kd_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Eigen_matrix.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Default_diagonalize_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Eigen_diagonalize_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/SCIP_mixed_integer_program_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Eigen_vector.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Eigen_solver_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mixed_integer_program_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Diagonalize_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/GLPK_mixed_integer_program_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Eigen_svd.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Orthogonal_incremental_neighbor_search.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Euclidean_distance_sphere_point.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Plane_separator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kd_tree_rectangle.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Search_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kd_tree.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Splitters.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Search_traits_adapter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Kd_tree_node.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Search_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Incremental_neighbor_search.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Iso_rectangle_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Search_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Fuzzy_iso_box.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Fuzzy_sphere.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Euclidean_distance.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/K_neighbor_search.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/bounded_priority_queue.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Get_dimension_tag.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/K_neighbor_search.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Manhattan_distance_iso_box_point.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Orthogonal_k_neighbor_search.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Weighted_Minkowski_distance.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_container.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Search_traits_d.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hilbert_sort_on_sphere_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Spatial_sort_traits_adapter_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hilbert_sort_middle_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/hilbert_sort.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Transform_coordinates_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Spatial_sort_traits_adapter_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hilbert_sort_median_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/spatial_sort.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/spatial_sort_on_sphere.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Multiscale_sort.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hilbert_sort_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hilbert_sort_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Spatial_sort_traits_adapter_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hilbert_sort_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hilbert_sort_middle_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hilbert_sort_middle_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hilbert_sort_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hilbert_sort_middle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hilbert_policy_tags.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hilbert_sort_median_d.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/hilbert_sort_on_sphere.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Hilbert_sort_median_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_halfedge_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/create_offset_polygons_from_polygon_with_holes_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/compute_outer_frame_margin.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates/Polygon_offset_pred_ftC2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/predicates/Straight_skeleton_pred_ftC2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/create_straight_skeleton_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/certified_numeric_predicates.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_builder_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/arrange_offset_polygons_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/certified_quotient_predicates.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_converter_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_builder_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_vertex_base_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/constructions -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/constructions/Straight_skeleton_cons_ftC2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/constructions/Polygon_offset_cons_ftC2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_offset_builder_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Dxf_writer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Dxf_stream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Unfiltered_predicate_adaptor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/create_straight_skeleton_from_polygon_with_holes_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_face_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Polygon_offset_builder_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_2/Straight_skeleton_aux.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_2/assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_2/debug.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_2/Straight_skeleton_builder_traits_2_aux.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_2/Straight_skeleton_builder_events_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_2/Straight_skeleton_builder_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_2/test.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_2/Polygon_offset_builder_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/create_offset_polygons_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Straight_skeleton_items_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/streamlines_assertions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangular_field_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Stream_lines_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Euler_integrator_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Runge_kutta_integrator_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regular_grid_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/write_3mf.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/io_tags.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/PLY.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/traits_point_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_writer_OFF.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/io_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/traits_multipolygon.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/traits_polygon.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Verbose_ostream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/write_vtk.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Istream_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_header_OFF_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Scanner_OFF.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/read_3mf.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/WKT.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_writer_VRML_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_scanner_OFF.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/traits_multilinestring.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/traits_point.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/trace.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/generic_copy_OFF.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_writer_wavefront.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_writer_OFF_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_writer_inventor_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_header_extended_OFF.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Writer_OFF.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_header_extended_OFF_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_writer_wavefront_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/traits_linestring.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_scanner_OFF_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_writer_VRML_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Generic_writer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_header_OFF.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/io.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Color.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/traits_multipoint.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/File_writer_inventor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Ostream_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/binary_file_io.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Geometry_container.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Subdivision_method_3 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Subdivision_method_3/subdivision_masks_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Subdivision_method_3/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Subdivision_method_3/internal/Euler_extensions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Subdivision_method_3/internal/subdivision_hosts_impl_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Subdivision_method_3/subdivision_methods_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Subdivision_method_3/subdivision_hosts_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/subdivision_method_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Surface_mesh_features.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Surface_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_Surface_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Surface_mesh_time_stamp.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh/IO/PLY.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh/IO/3mf.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh/IO.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh/Properties.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh/Surface_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/draw_surface_mesh.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Variational_shape_approximation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_approximation -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_approximation/approximate_triangle_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_approximation/L2_metric_plane_proxy.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_approximation/L21_metric_plane_proxy.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Deformation_Eigen_closest_rotation_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_deformation.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_deformation -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_deformation/Spokes_and_rims_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Deformation_Eigen_polar_closest_rotation_traits_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/parameterize.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/orbifold_enums.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/Error_code.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/Mean_value_coordinates_parameterizer_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/Discrete_authalic_parameterizer_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/MVC_post_processor_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/Orbifold_Tutte_parameterizer_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/IO/File_off.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/Fixed_border_parameterizer_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/Two_vertices_parameterizer_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/ARAP_parameterizer_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/orbifold_shortest_path.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/LSCM_parameterizer_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/Square_border_parameterizer_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/internal/Containers_filler.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/internal/orbifold_cone_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/internal/validity.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/internal/kernel_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/internal/angles.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/internal/Bool_property_map.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/Barycentric_mapping_parameterizer_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/Discrete_conformal_map_parameterizer_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_parameterization/Circular_border_parameterizer_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/surface_mesh_parameterization.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_segmentation -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_segmentation/Disk_samplers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_segmentation/AABB_traversal_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_segmentation/AABB_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_segmentation/K_means_clustering.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_segmentation/SDF_calculation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_segmentation/Expectation_maximization.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_segmentation/Alpha_expansion_graph_cut.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_segmentation/Filters.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_segmentation/Surface_mesh_segmentation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/auxiliary -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/auxiliary/graph.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/mesh_segmentation.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_shortest_path -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_shortest_path/Surface_mesh_shortest_path_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_shortest_path/Surface_mesh_shortest_path.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_shortest_path/barycentric.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_shortest_path/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_shortest_path/internal/Cone_tree.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_shortest_path/internal/misc_functions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_shortest_path/internal/Cone_expansion_event.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_shortest_path/function_objects.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_shortest_path.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Cartesian/MatrixC33.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Null_matrix.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/Edge_profile.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/LindstromTurk_cost.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/Midpoint_placement.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/LindstromTurk_params.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/LindstromTurk_placement.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/Edge_length_stop_predicate.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/Edge_profile_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/Bounded_normal_change_placement.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/Count_ratio_stop_predicate.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/Edge_length_cost.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/Midpoint_and_length.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/Count_stop_predicate.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/Detail -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/Detail/Lindstrom_Turk_core_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/Detail/Lindstrom_Turk_core.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/Constrained_placement.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Policies/Edge_collapse/LindstromTurk.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Detail -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Detail/Common.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Detail/Edge_collapse.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Detail/Edge_collapse_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/HalfedgeGraph_Polyhedron_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/Edge_collapse_visitor_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_simplification/edge_collapse.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Mean_curvature_flow_skeletonization.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_skeletonization -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_skeletonization/Curve_skeleton.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_skeletonization/Detect_degeneracy.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Surface_mesh_skeletonization/Debug.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/extract_mean_curvature_flow_skeleton.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_with_surface_index.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Combining_oracle.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Vertices_on_the_same_psc_element_criterion.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Sphere_oracle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Surface_mesher_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Null_oracle_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Surface_mesher_edges_level.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Types_generators.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Surface_mesher_edges_level_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Surface_mesher_regular_edges.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Verbose_flag.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Intersection_data_structure_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Polyhedral_oracle.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Implicit_surface_oracle_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Has_edges.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Standard_criteria.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Vertices_on_the_same_surface_criterion.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Profile_timer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Surface_mesher.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Surface_mesher_manifold.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Profile_counter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher/Point_surface_indices_oracle_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/AABB_polyhedral_oracle.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_with_surface_index_geom_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_with_psc_localisation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Gray_level_image_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_complex_2_in_triangulation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_vertex_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesher_generator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Complex_2_in_triangulation_vertex_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Implicit_surface_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_default_edges_criteria_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/make_piecewise_smooth_surface_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Point_traits.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_default_triangulation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/vtkSurfaceMesherContourFilter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Robust_circumcenter_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Complex_2_in_triangulation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/make_surface_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_triangulation_generator_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_traits_generator_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_default_criteria_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Complex_2_in_triangulation_3_to_medit.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Complex_2_in_triangulation_3_polyhedron_builder.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/facets_in_complex_2_to_triangle_mesh.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Complex_2_in_triangulation_3_to_vtk.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/output_surface_facets_to_polyhedron.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Complex_2_in_triangulation_3_file_writer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_mesh_cell_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Complex_2_in_triangulation_cell_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Multi_surface_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Surface_sweep_2_debug.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/No_intersection_surface_sweep_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Do_interior_intersect_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Surface_sweep_2_utils.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Default_subcurve.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Curve_comparer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Surface_sweep_2_impl.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Default_event.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Event_comparer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/No_overlap_event.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/No_overlap_subcurve.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Default_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Subcurves_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Default_visitor_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/No_overlap_event_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Curve_pair.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Default_event_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2/Intersection_points_visitor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/No_intersection_surface_sweep_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Sweep_line_2_algorithms.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Surface_sweep_2_algorithms.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Dummy_tds_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_utils_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_ds_iterators_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_ds_face_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_ds_circulators_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_ds_face_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_data_structure_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_ds_vertex_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/TDS_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/TDS_2/edge_list.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/TDS_2/Edge_hash_function.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_ds_vertex_base_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Triangulation_ds_circulators_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Dummy_tds_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Triangulation_ds_iterators_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_ds_cell_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_data_structure_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_ds_vertex_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_utils_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_simplex_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Testsuite -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Testsuite/vc_debug_hook.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Testsuite/use.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Polyhedron_demo_plugin_interface.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Scene_draw_interface.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Scene_item_rendering_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/TextRenderer.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Primitive_container.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Scene_interface.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Edge_container.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Polyhedron_demo_io_plugin_interface.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/exceptions.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Viewer_interface.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Scene_group_item.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Scene_item_with_properties.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Point_container.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Scene_print_item_interface.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Viewer_config.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Scene_item.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Scene_item_config.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Three.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Scene_zoomable_item_interface.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Triangle_container.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Scene_transparent_interface.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Buffer_objects.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Three/Polyhedron_demo_plugin_helper.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regular_triangulation_traits_adapter.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regular_triangulation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_vertex.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Static_or_dynamic_array.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Combination_enumerator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Triangulation -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Triangulation/Dummy_TDS.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Triangulation/utilities.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Triangulation/Triangulation_ds_iterators.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_full_cell.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/TDS_full_cell_default_storage_policy.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/TDS_full_cell_mirror_storage_policy.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_ds_vertex.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_ds_full_cell.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_face.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_data_structure.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_triangulation.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Triangulation_off_ostream.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_face_base_with_id_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_data_structure_using_list_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_default_data_structure_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Triangulation_ps_stream.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Triangulation_geomview_ostream_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Triangulation_off_ostream_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regular_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regular_triangulation_vertex_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Constrained_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_vertex_base_with_id_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_vertex_base_with_info_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_face_base_with_info_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_hierarchy_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Constrained_Delaunay_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_2_projection_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regular_triangulation_face_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_2/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_2/internal/Triangulation_2_projection_traits_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_2/internal/Constraint_hierarchy_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_2/internal/Polyline_constraint_hierarchy_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_2/internal/Triangulation_2_filtered_projection_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_2/internal/Triangulation_line_face_circulator_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_2/insert_constraints.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_2_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Constrained_triangulation_plus_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_face_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_hierarchy_vertex_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_vertex_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/draw_triangulation_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_Constrained_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_Constrained_Delaunay_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_Triangulation_hierarchy_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Delaunay_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Regular_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_Constrained_triangulation_plus_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Constrained_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_Regular_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_Delaunay_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_Triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Triangulation_data_structure_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Constrained_triangulation_plus_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/internal/properties_2D_triangulation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/internal/graph_traits_2D_triangulation.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/internal/graph_traits_2D_triangulation_helper.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/graph_traits_Triangulation_data_structure_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Triangulation_hierarchy_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Constrained_Delaunay_triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/boost/graph/properties_Triangulation_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/apply_to_range.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_2_to_lcc.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Constrained_triangulation_face_base_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regular_triangulation_euclidean_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_vertex_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_triangulation_cell_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regular_triangulation_vertex_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_hierarchy_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/draw_triangulation_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/internal/Delaunay_triangulation_hierarchy_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Robust_weighted_circumcenter_filtered_traits_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_3_to_lcc.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/link_to_face_graph.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_cell_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_triangulation_cell_base_with_circumcenter_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regular_triangulation_cell_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_cell_base_with_info_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regular_triangulation_cell_base_with_weighted_circumcenter_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_triangulation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_vertex_base_with_info_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_geom_traits_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Triangulation_geomview_ostream_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/IO/Triangulation_off_ostream_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangulation_hierarchy_vertex_base_3.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regular_triangulation_3.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Union_find.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Simple_polygon_visibility_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Triangular_expansion_visibility_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Visibility_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Visibility_2/visibility_utils.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Rotational_sweep_visibility_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_adaptation_policies_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_triangulation_adaptation_policies_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regular_triangulation_adaptation_policies_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2 -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Cached_degeneracy_testers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Finder_classes.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Segment_Delaunay_graph_nearest_site_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Delaunay_triangulation_nearest_site_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Delaunay_triangulation_degeneracy_testers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Identity_rejectors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Edge_less.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Degeneracy_tester_binders.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Unbounded_edges.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Dummy_iterator.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/basic.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Default_site_removers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Regular_triangulation_degeneracy_testers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Face.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Accessor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Handle_adaptor.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Adaptation_traits_base_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Validity_testers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Unbounded_faces.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Vertex.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Apollonius_graph_nearest_site_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Halfedge.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Segment_Delaunay_graph_degeneracy_testers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Regular_triangulation_nearest_site_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Circulator_adaptors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Site_accessors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Adaptation_traits_functors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Iterator_adaptors.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Default_site_inserters.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Connected_components.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Construct_dual_points.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Policy_base.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2/Apollonius_graph_degeneracy_testers.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_adaptation_policies_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Identity_policy_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Voronoi_diagram_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Apollonius_graph_adaptation_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Regular_triangulation_adaptation_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Delaunay_triangulation_adaptation_traits_2.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/Segment_Delaunay_graph_adaptation_traits_2.h -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include/CGAL/version.h -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindTensorFlow.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_SetupGMP.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_SetupDependencies.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/UseEigen3.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_CreateSingleSourceCGALProgram.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindRS3.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_enable_end_of_configuration_hook.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindESBTL.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_UseRS3.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindLASLIB.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_add_test.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/list_of_whitelisted_headers.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindGLPK.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/UseCGAL.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_SCM.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_SetupBoost.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindIPE.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindOpenMesh.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGALConfig_binary.cmake.in -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_display_flags.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_Macros.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_parse_version_h.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindNTL.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindSuiteSparse.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_Common.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_setup_target_dependencies.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindCORE.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindEigen3.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_UseMKL.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_SetupCGAL_ImageIODependencies.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindMPFR.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_SetupVLD.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindMPFI.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_SetupCGAL_Qt5Dependencies.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGALConfig_binary_header_only.cmake.in -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/Makefile -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindMETIS.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/process_dependencies.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/UseTBB.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/run_test_with_cin.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/UseESBTL.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/UseLASLIB.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/test_MPFI.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/Help -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/Help/CGAL_SetupCGAL_Qt5Dependencies.rst -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/Help/index.rst -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/Help/CGAL_SetupCGAL_ImageIODependencies.rst -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/Help/CGAL_SetupCGAL_CoreDependencies.rst -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/Help/conf.py -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/Help/CGAL_SetupBoost.rst -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/Help/CGAL_SetupLEDA.rst -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/Help/cmake.py -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/Help/CGAL_SetupGMP.rst -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/Help/CGAL_SetupCGALDependencies.rst -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_Qt5_moc_and_resource_files.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/version.h.in -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/test_BOOST.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/test_ZLIB.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/test_X11.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/print_QT4_version.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/print_QT_version.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/test_GMPXX.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/print_MPFR_version.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/test_LIDIA.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/test_QT.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/test_BOOST_THREAD.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/print_MPFI_version.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/test_OPENGL.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/CGAL_test_cpp_version.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/test_GMP.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/print_LEDA_version.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/print_OPENGL_version.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/print_BOOST_version.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/print_GMP_version.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/test_MPFR.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/print_GCC_version.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/print_IntelCompiler_version.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/print_ZLIB_version.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/test_BOOST_PROGRAM_OPTIONS.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/test_LEDAWIN.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/test_LEDA.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/support/test_syntaxonly.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_DENORMALS_COMPILE_BUG.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_ISTREAM_INT_BUG.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_NO_NEXTAFTER.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_MATCHING_BUG_8.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_MATCHING_BUG_6.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_NUMERIC_LIMITS_BUG.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_OUTOFLINE_MEMBER_DEFINITION_BUG.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_FPU_ROUNDING_MODE_UNWINDING_VC_BUG.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_TYPENAME_BEFORE_DEFAULT_ARGUMENT_BUG.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_IEEE_754_BUG.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_TEMPLATE_IN_DEFAULT_PARAMETER_BUG.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_MATCHING_BUG_5.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_NO_STL.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_NO_LIMITS.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_MATCHING_BUG_7.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/config/testfiles/CGAL_CFG_USING_BASE_MEMBER_BUG_2.cpp -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_SetupLEDA.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindLEDA.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_UseRS.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_target_use_TBB.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/run_cmd_redirection_cerr.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindRS.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_SetupCGAL_CoreDependencies.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindGMPXX.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_UseMPFI.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_CheckCXXFileRuns.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_SetupFlags.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_GeneratorSpecificSettings.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindMKL.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGALLibConfig.cmake.in -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_VersionUtils.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindGMP.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindTBB.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_UseLEDA.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/FindF2C.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_SetupCGALDependencies.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGAL_TweakFindBoost.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGALConfig_install.cmake.in -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/UseOpenMesh.cmake -- Up-to-date: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/UseCGAL.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGALConfig-installation-dirs.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/lib/cmake/CGAL/CGALConfig.cmake -- Installing: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/share/man/man1/cgal_create_cmake_script.1 ===> Performing out-of-source build /bin/mkdir -p /construction/cad/PrusaSlicer/.build -- The C compiler identification is GNU 8.3.0 -- The CXX compiler identification is GNU 8.3.0 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /usr/bin/cc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done -- SLIC3R_ASAN: OFF -- SLIC3R_BUILD_SANDBOXES: OFF -- SLIC3R_BUILD_TESTS: ON -- SLIC3R_FHS: OFF -- SLIC3R_GTK: 2 -- SLIC3R_GUI: ON -- SLIC3R_MSVC_COMPILE_PARALLEL: ON -- SLIC3R_MSVC_PDB: ON -- SLIC3R_PCH: ON -- SLIC3R_PERL_XS: OFF -- SLIC3R_PROFILE: OFF -- SLIC3R_STATIC: OFF -- SLIC3R_WX_STABLE: OFF -- SLIC3R_STATIC: OFF -- CMAKE_PREFIX_PATH: (default) -- Looking for pthread.h -- Looking for pthread.h - found -- Found Threads: TRUE -- Found Boost: /usr/local/include (found suitable version "1.72.0", minimum required is "1.64.0") found components: system filesystem thread log locale regex chrono atomic date_time log_setup -- Boost::boost exists -- Found TBB: /usr/local/include (found version "2020.3") -- TBB_FOUND = TRUE -- TBB_INCLUDE_DIRS = /usr/local/include -- TBB_DEFINITIONS = -- TBB_LIBRARIES = /usr/local/lib/libtbb.so -- TBB_DEFINITIONS_DEBUG = TBB_USE_DEBUG=1 -- TBB_LIBRARIES_DEBUG = -- TBB_DEFINITIONS_RELEASE = -- TBB_LIBRARIES_RELEASE = /usr/local/lib/libtbb.so -- Found CURL: /usr/local/lib/libcurl.so (found version "7.72.0") -- Found ZLIB: /usr/lib/libz.so (found version "1.2.11") -- Found Eigen3: /usr/local/include/eigen3 (Required is at least version "3.3") -- Found EXPAT: /usr/local/lib/libexpat.so (found version "2.2.8") -- Found OpenGL: /usr/local/lib/libGL.so -- Found GLEW: /usr/local/include (found version "2.2.0") -- Found NLopt in '/usr/local/lib'. -- Using NLopt include directory '/usr/local/include'. -- Using NLopt library '/usr/local/lib/libnlopt.so'. -- Found PkgConfig: pkgconf (found version "1.7.3") -- Found OpenVDB: /usr/local/include (found suitable version "7.0.0", minimum required is "5.0") found components: openvdb -- OpenVDB ABI Version: 7 -- Found Boost: /usr/local/include (found version "1.72.0") found components: iostreams system regex -- Performing Test HAVE_CXX_ATOMICS64_WITHOUT_LIB -- Performing Test HAVE_CXX_ATOMICS64_WITHOUT_LIB - Success -- Performing Test LLVM_HAS_ATOMICS -- Performing Test LLVM_HAS_ATOMICS - Success -- OpenVDB libraries: /usr/local/lib/libopenvdb.so -- Miniz NOT found in system, using bundled version... -- qhull Version: 7.2.0 (static linking) -- IGL NOT found, using bundled version... -- Using header-only CGAL -- Targetting Unix Makefiles -- Using /usr/bin/c++ compiler. -- Found GMP: /usr/local/lib/libgmp.so -- Found MPFR: /usr/local/lib/libmpfr.so -- Found Boost: /usr/local/include (found suitable version "1.72.0", minimum required is "1.48") -- Boost include dirs: /usr/local/include -- Boost libraries: -- Using gcc version 4 or later. Adding -frounding-math -- Found wxWidgets: -L/usr/local/lib;-pthread;;;-lwx_gtk3u_html-3.1;-lwx_gtk3u_gl-3.1;-lwx_gtk3u_core-3.1;-lwx_baseu-3.1 (found suitable version "3.1.4", minimum required is "3.1") -- wx-config path: /usr/local/bin/wxgtk3u-3.1-config -- wx libs: -L/usr/local/lib;-pthread;;;-lwx_gtk3u_html-3.1;-lwx_gtk3u_gl-3.1;-lwx_gtk3u_core-3.1;-lwx_baseu-3.1 -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: CMAKE_MODULE_LINKER_FLAGS CMAKE_SHARED_LINKER_FLAGS ICONV_INCLUDE_DIR ICONV_LIBRARIES ICONV_LIBRARY LIBICONV_INCLUDE_DIR LIBICONV_LIBRARIES LIBICONV_LIBRARY -- Build files have been written to: /construction/cad/PrusaSlicer/.build SUCCEEDED 00:00:19 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for PrusaSlicer-2.2.0_6 /usr/local/bin/cmake -S/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 -B/construction/cad/PrusaSlicer/.build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/local/bin/cmake -E cmake_progress_start /construction/cad/PrusaSlicer/.build/CMakeFiles /construction/cad/PrusaSlicer/.build//CMakeFiles/progress.marks /usr/bin/make -f CMakeFiles/Makefile2 all --- src/avrdude/CMakeFiles/avrdude-conf-gen.dir/all --- --- src/build-utils/CMakeFiles/encoding-check.dir/all --- --- src/admesh/CMakeFiles/admesh.dir/all --- --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- --- src/miniz/CMakeFiles/miniz_static.dir/all --- --- src/clipper/CMakeFiles/clipper.dir/all --- --- src/boost/CMakeFiles/nowide.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- --- src/polypartition/CMakeFiles/polypartition.dir/all --- --- src/build-utils/CMakeFiles/encoding-check.dir/all --- /usr/bin/make -f src/build-utils/CMakeFiles/encoding-check.dir/build.make src/build-utils/CMakeFiles/encoding-check.dir/depend --- src/admesh/CMakeFiles/admesh.dir/all --- /usr/bin/make -f src/admesh/CMakeFiles/admesh.dir/build.make src/admesh/CMakeFiles/admesh.dir/depend --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- /usr/bin/make -f src/glu-libtess/CMakeFiles/glu-libtess.dir/build.make src/glu-libtess/CMakeFiles/glu-libtess.dir/depend --- src/miniz/CMakeFiles/miniz_static.dir/all --- /usr/bin/make -f src/miniz/CMakeFiles/miniz_static.dir/build.make src/miniz/CMakeFiles/miniz_static.dir/depend --- src/boost/CMakeFiles/nowide.dir/all --- /usr/bin/make -f src/boost/CMakeFiles/nowide.dir/build.make src/boost/CMakeFiles/nowide.dir/depend --- src/qhull/CMakeFiles/qhullstatic.dir/all --- /usr/bin/make -f src/qhull/CMakeFiles/qhullstatic.dir/build.make src/qhull/CMakeFiles/qhullstatic.dir/depend --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- /usr/bin/make -f src/poly2tri/CMakeFiles/poly2tri.dir/build.make src/poly2tri/CMakeFiles/poly2tri.dir/depend --- src/polypartition/CMakeFiles/polypartition.dir/all --- /usr/bin/make -f src/polypartition/CMakeFiles/polypartition.dir/build.make src/polypartition/CMakeFiles/polypartition.dir/depend --- src/build-utils/CMakeFiles/encoding-check.dir/all --- --- src/build-utils/CMakeFiles/encoding-check.dir/depend --- --- src/admesh/CMakeFiles/admesh.dir/all --- --- src/admesh/CMakeFiles/admesh.dir/depend --- --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- --- src/glu-libtess/CMakeFiles/glu-libtess.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/glu-libtess /construction/cad/PrusaSlicer/.build/src/glu-libtess/CMakeFiles/glu-libtess.dir/DependInfo.cmake --- src/miniz/CMakeFiles/miniz_static.dir/all --- --- src/miniz/CMakeFiles/miniz_static.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/miniz /construction/cad/PrusaSlicer/.build/src/miniz/CMakeFiles/miniz_static.dir/DependInfo.cmake --- src/build-utils/CMakeFiles/encoding-check.dir/all --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/build-utils /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/build-utils /construction/cad/PrusaSlicer/.build/src/build-utils/CMakeFiles/encoding-check.dir/DependInfo.cmake --- src/boost/CMakeFiles/nowide.dir/all --- --- src/boost/CMakeFiles/nowide.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/boost /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/boost /construction/cad/PrusaSlicer/.build/src/boost/CMakeFiles/nowide.dir/DependInfo.cmake --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/qhull /construction/cad/PrusaSlicer/.build/src/qhull/CMakeFiles/qhullstatic.dir/DependInfo.cmake --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- --- src/poly2tri/CMakeFiles/poly2tri.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/poly2tri /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/poly2tri /construction/cad/PrusaSlicer/.build/src/poly2tri/CMakeFiles/poly2tri.dir/DependInfo.cmake --- src/polypartition/CMakeFiles/polypartition.dir/all --- --- src/polypartition/CMakeFiles/polypartition.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/polypartition /construction/cad/PrusaSlicer/.build/src/polypartition/CMakeFiles/polypartition.dir/DependInfo.cmake --- src/avrdude/CMakeFiles/avrdude-conf-gen.dir/all --- /usr/bin/make -f src/avrdude/CMakeFiles/avrdude-conf-gen.dir/build.make src/avrdude/CMakeFiles/avrdude-conf-gen.dir/depend --- src/clipper/CMakeFiles/clipper.dir/all --- /usr/bin/make -f src/clipper/CMakeFiles/clipper.dir/build.make src/clipper/CMakeFiles/clipper.dir/depend --- src/admesh/CMakeFiles/admesh.dir/all --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/admesh /construction/cad/PrusaSlicer/.build/src/admesh/CMakeFiles/admesh.dir/DependInfo.cmake --- src/build-utils/CMakeFiles/encoding-check.dir/all --- Scanning dependencies of target encoding-check --- src/polypartition/CMakeFiles/polypartition.dir/all --- Scanning dependencies of target polypartition --- src/build-utils/CMakeFiles/encoding-check.dir/all --- /usr/bin/make -f src/build-utils/CMakeFiles/encoding-check.dir/build.make src/build-utils/CMakeFiles/encoding-check.dir/build --- src/polypartition/CMakeFiles/polypartition.dir/all --- /usr/bin/make -f src/polypartition/CMakeFiles/polypartition.dir/build.make src/polypartition/CMakeFiles/polypartition.dir/build --- src/clipper/CMakeFiles/clipper.dir/all --- --- src/clipper/CMakeFiles/clipper.dir/depend --- --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- Scanning dependencies of target poly2tri /usr/bin/make -f src/poly2tri/CMakeFiles/poly2tri.dir/build.make src/poly2tri/CMakeFiles/poly2tri.dir/build --- src/clipper/CMakeFiles/clipper.dir/all --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/clipper /construction/cad/PrusaSlicer/.build/src/clipper/CMakeFiles/clipper.dir/DependInfo.cmake --- src/avrdude/CMakeFiles/avrdude-conf-gen.dir/all --- --- src/avrdude/CMakeFiles/avrdude-conf-gen.dir/depend --- --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- Scanning dependencies of target glu-libtess --- src/avrdude/CMakeFiles/avrdude-conf-gen.dir/all --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/avrdude /construction/cad/PrusaSlicer/.build/src/avrdude/CMakeFiles/avrdude-conf-gen.dir/DependInfo.cmake --- src/build-utils/CMakeFiles/encoding-check.dir/all --- --- src/build-utils/CMakeFiles/encoding-check.dir/encoding-check.cpp.o --- --- src/polypartition/CMakeFiles/polypartition.dir/all --- --- src/polypartition/CMakeFiles/polypartition.dir/polypartition.cpp.o --- --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- /usr/bin/make -f src/glu-libtess/CMakeFiles/glu-libtess.dir/build.make src/glu-libtess/CMakeFiles/glu-libtess.dir/build --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- --- src/poly2tri/CMakeFiles/poly2tri.dir/common/shapes.cc.o --- --- src/miniz/CMakeFiles/miniz_static.dir/all --- Scanning dependencies of target miniz_static /usr/bin/make -f src/miniz/CMakeFiles/miniz_static.dir/build.make src/miniz/CMakeFiles/miniz_static.dir/build --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- --- src/glu-libtess/CMakeFiles/glu-libtess.dir/src/dict.c.o --- --- src/avrdude/CMakeFiles/avrdude-conf-gen.dir/all --- Scanning dependencies of target avrdude-conf-gen --- src/polypartition/CMakeFiles/polypartition.dir/all --- [ 0%] Building CXX object src/polypartition/CMakeFiles/polypartition.dir/polypartition.cpp.o cd /construction/cad/PrusaSlicer/.build/src/polypartition && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/polypartition.dir/polypartition.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition/polypartition.cpp --- src/avrdude/CMakeFiles/avrdude-conf-gen.dir/all --- /usr/bin/make -f src/avrdude/CMakeFiles/avrdude-conf-gen.dir/build.make src/avrdude/CMakeFiles/avrdude-conf-gen.dir/build --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- [ 1%] Building CXX object src/poly2tri/CMakeFiles/poly2tri.dir/common/shapes.cc.o --- src/miniz/CMakeFiles/miniz_static.dir/all --- --- src/miniz/CMakeFiles/miniz_static.dir/miniz.c.o --- --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- cd /construction/cad/PrusaSlicer/.build/src/poly2tri && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/poly2tri.dir/common/shapes.cc.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/poly2tri/common/shapes.cc --- src/build-utils/CMakeFiles/encoding-check.dir/all --- [ 1%] Building CXX object src/build-utils/CMakeFiles/encoding-check.dir/encoding-check.cpp.o cd /construction/cad/PrusaSlicer/.build/src/build-utils && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIE -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/encoding-check.dir/encoding-check.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/build-utils/encoding-check.cpp --- src/boost/CMakeFiles/nowide.dir/all --- Scanning dependencies of target nowide --- src/clipper/CMakeFiles/clipper.dir/all --- Scanning dependencies of target clipper --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- [ 1%] Building C object src/glu-libtess/CMakeFiles/glu-libtess.dir/src/dict.c.o --- src/boost/CMakeFiles/nowide.dir/all --- /usr/bin/make -f src/boost/CMakeFiles/nowide.dir/build.make src/boost/CMakeFiles/nowide.dir/build --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- cd /construction/cad/PrusaSlicer/.build/src/glu-libtess && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/glu-libtess.dir/src/dict.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/src/dict.c --- src/clipper/CMakeFiles/clipper.dir/all --- /usr/bin/make -f src/clipper/CMakeFiles/clipper.dir/build.make src/clipper/CMakeFiles/clipper.dir/build --- src/miniz/CMakeFiles/miniz_static.dir/all --- [ 1%] Building C object src/miniz/CMakeFiles/miniz_static.dir/miniz.c.o cd /construction/cad/PrusaSlicer/.build/src/miniz && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_GNU_SOURCE -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/miniz_static.dir/miniz.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz/miniz.c --- src/avrdude/CMakeFiles/avrdude-conf-gen.dir/all --- --- src/avrdude/CMakeFiles/avrdude-conf-gen.dir/conf-generate.cpp.o --- --- src/clipper/CMakeFiles/clipper.dir/all --- --- src/clipper/CMakeFiles/clipper.dir/clipper.cpp.o --- --- src/boost/CMakeFiles/nowide.dir/all --- --- src/boost/CMakeFiles/nowide.dir/nowide/iostream.cpp.o --- --- src/avrdude/CMakeFiles/avrdude-conf-gen.dir/all --- [ 2%] Building CXX object src/avrdude/CMakeFiles/avrdude-conf-gen.dir/conf-generate.cpp.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/c++ -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIE -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/avrdude-conf-gen.dir/conf-generate.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/conf-generate.cpp --- src/clipper/CMakeFiles/clipper.dir/all --- [ 2%] Building CXX object src/clipper/CMakeFiles/clipper.dir/clipper.cpp.o --- src/boost/CMakeFiles/nowide.dir/all --- [ 2%] Building CXX object src/boost/CMakeFiles/nowide.dir/nowide/iostream.cpp.o --- src/clipper/CMakeFiles/clipper.dir/all --- cd /construction/cad/PrusaSlicer/.build/src/clipper && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/clipper.dir/clipper.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlic--- src/boost/CMakeFiles/nowide.dir/all --- cd /construction/cad/PrusaSlicer/.build/src/boost && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/nowide.dir/nowide/iostream.cpp.o -c /const--- src/clipper/CMakeFiles/clipper.dir/all --- er-version_2.2.0/src/clipper/clipper.cpp --- src/boost/CMakeFiles/nowide.dir/all --- ruction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/boost/nowide/iostream.cpp --- src/miniz/CMakeFiles/miniz_static.dir/all --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz/miniz.c:3079:9: note: #pragma message: Using fopen, ftello, fseeko, stat() etc. path for file I/O - this path may not support large files. #pragma message("Using fopen, ftello, fseeko, stat() etc. path for file I/O - this path may not support large files.") ^~~~~~~ --- src/qhull/CMakeFiles/qhullstatic.dir/all --- Scanning dependencies of target qhullstatic /usr/bin/make -f src/qhull/CMakeFiles/qhullstatic.dir/build.make src/qhull/CMakeFiles/qhullstatic.dir/build --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/global_r.c.o --- [ 3%] Building C object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/global_r.c.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/qhullstatic.dir/src/libqhull_r/global_r.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhull_r/global_r.c --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- --- src/glu-libtess/CMakeFiles/glu-libtess.dir/src/geom.c.o --- [ 4%] Building C object src/glu-libtess/CMakeFiles/glu-libtess.dir/src/geom.c.o cd /construction/cad/PrusaSlicer/.build/src/glu-libtess && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/glu-libtess.dir/src/geom.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/src/geom.c --- src/glu-libtess/CMakeFiles/glu-libtess.dir/src/memalloc.c.o --- [ 4%] Building C object src/glu-libtess/CMakeFiles/glu-libtess.dir/src/memalloc.c.o cd /construction/cad/PrusaSlicer/.build/src/glu-libtess && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/glu-libtess.dir/src/memalloc.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/src/memalloc.c --- src/glu-libtess/CMakeFiles/glu-libtess.dir/src/mesh.c.o --- [ 4%] Building C object src/glu-libtess/CMakeFiles/glu-libtess.dir/src/mesh.c.o cd /construction/cad/PrusaSlicer/.build/src/glu-libtess && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/glu-libtess.dir/src/mesh.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/src/mesh.c --- src/admesh/CMakeFiles/admesh.dir/all --- Scanning dependencies of target admesh /usr/bin/make -f src/admesh/CMakeFiles/admesh.dir/build.make src/admesh/CMakeFiles/admesh.dir/build --- src/admesh/CMakeFiles/admesh.dir/connect.cpp.o --- [ 4%] Building CXX object src/admesh/CMakeFiles/admesh.dir/connect.cpp.o cd /construction/cad/PrusaSlicer/.build/src/admesh && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/admesh.dir/connect.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/connect.cpp --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- --- src/glu-libtess/CMakeFiles/glu-libtess.dir/src/normal.c.o --- [ 4%] Building C object src/glu-libtess/CMakeFiles/glu-libtess.dir/src/normal.c.o cd /construction/cad/PrusaSlicer/.build/src/glu-libtess && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/glu-libtess.dir/src/normal.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/src/normal.c --- src/glu-libtess/CMakeFiles/glu-libtess.dir/src/priorityq.c.o --- [ 5%] Building C object src/glu-libtess/CMakeFiles/glu-libtess.dir/src/priorityq.c.o cd /construction/cad/PrusaSlicer/.build/src/glu-libtess && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/glu-libtess.dir/src/priorityq.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/src/priorityq.c --- src/glu-libtess/CMakeFiles/glu-libtess.dir/src/render.c.o --- [ 5%] Building C object src/glu-libtess/CMakeFiles/glu-libtess.dir/src/render.c.o cd /construction/cad/PrusaSlicer/.build/src/glu-libtess && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/glu-libtess.dir/src/render.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/src/render.c --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- --- src/poly2tri/CMakeFiles/poly2tri.dir/sweep/advancing_front.cc.o --- [ 5%] Building CXX object src/poly2tri/CMakeFiles/poly2tri.dir/sweep/advancing_front.cc.o cd /construction/cad/PrusaSlicer/.build/src/poly2tri && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/poly2tri.dir/sweep/advancing_front.cc.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/poly2tri/sweep/advancing_front.cc --- src/avrdude/CMakeFiles/avrdude-conf-gen.dir/all --- --- src/avrdude/avrdude-conf-gen --- --- src/boost/CMakeFiles/nowide.dir/all --- --- src/boost/libnowide.a --- --- src/avrdude/CMakeFiles/avrdude-conf-gen.dir/all --- [ 5%] Linking CXX executable avrdude-conf-gen cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/avrdude-conf-gen.dir/link.txt --verbose=1 --- src/boost/CMakeFiles/nowide.dir/all --- [ 5%] Linking CXX static library libnowide.a cd /construction/cad/PrusaSlicer/.build/src/boost && /usr/local/bin/cmake -P CMakeFiles/nowide.dir/cmake_clean_target.cmake --- src/avrdude/CMakeFiles/avrdude-conf-gen.dir/all --- /usr/bin/c++ -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG CMakeFiles/avrdude-conf-gen.dir/conf-generate.cpp.o -o avrdude-conf-gen --- src/boost/CMakeFiles/nowide.dir/all --- cd /construction/cad/PrusaSlicer/.build/src/boost && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/nowide.dir/link.txt --verbose=1 /usr/bin/ar qc libnowide.a CMakeFiles/nowide.dir/nowide/iostream.cpp.o /usr/bin/ranlib libnowide.a [ 5%] Built target nowide --- src/hidapi/CMakeFiles/hidapi.dir/all --- /usr/bin/make -f src/hidapi/CMakeFiles/hidapi.dir/build.make src/hidapi/CMakeFiles/hidapi.dir/depend --- src/hidapi/CMakeFiles/hidapi.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/hidapi /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/hidapi /construction/cad/PrusaSlicer/.build/src/hidapi/CMakeFiles/hidapi.dir/DependInfo.cmake Scanning dependencies of target hidapi /usr/bin/make -f src/hidapi/CMakeFiles/hidapi.dir/build.make src/hidapi/CMakeFiles/hidapi.dir/build --- src/avrdude/CMakeFiles/avrdude-conf-gen.dir/all --- [ 5%] Built target avrdude-conf-gen --- src/imgui/CMakeFiles/imgui.dir/all --- /usr/bin/make -f src/imgui/CMakeFiles/imgui.dir/build.make src/imgui/CMakeFiles/imgui.dir/depend --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- --- src/glu-libtess/CMakeFiles/glu-libtess.dir/src/sweep.c.o --- --- src/hidapi/CMakeFiles/hidapi.dir/all --- --- src/hidapi/CMakeFiles/hidapi.dir/libusb/hid.c.o --- --- src/imgui/CMakeFiles/imgui.dir/all --- --- src/imgui/CMakeFiles/imgui.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/imgui /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/imgui /construction/cad/PrusaSlicer/.build/src/imgui/CMakeFiles/imgui.dir/DependInfo.cmake --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- [ 5%] Building C object src/glu-libtess/CMakeFiles/glu-libtess.dir/src/sweep.c.o --- src/hidapi/CMakeFiles/hidapi.dir/all --- [ 5%] Building C object src/hidapi/CMakeFiles/hidapi.dir/libusb/hid.c.o --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- cd /construction/cad/PrusaSlicer/.build/src/glu-libtess && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/glu-libtess.dir/src/sweep.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/src/sweep.c --- src/hidapi/CMakeFiles/hidapi.dir/all --- cd /construction/cad/PrusaSlicer/.build/src/hidapi && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/hidapi/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/hidapi.dir/libusb/hid.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/hidapi/libusb/hid.c --- src/imgui/CMakeFiles/imgui.dir/all --- Scanning dependencies of target imgui /usr/bin/make -f src/imgui/CMakeFiles/imgui.dir/build.make src/imgui/CMakeFiles/imgui.dir/build --- src/imgui/CMakeFiles/imgui.dir/imgui.cpp.o --- [ 5%] Building CXX object src/imgui/CMakeFiles/imgui.dir/imgui.cpp.o cd /construction/cad/PrusaSlicer/.build/src/imgui && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/imgui.dir/imgui.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/imgui/imgui.cpp --- src/hidapi/CMakeFiles/hidapi.dir/all --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/hidapi/libusb/hid.c: In function 'get_usb_string': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/hidapi/libusb/hid.c:458:18: warning: passing argument 2 of 'iconv' from incompatible pointer type [-Wincompatible-pointer-types] res = iconv(ic, &inptr, &inbytes, &outptr, &outbytes); ^~~~~~ In file included from /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/hidapi/libusb/hid.c:49: /usr/local/include/iconv.h:84:43: note: expected 'char **' but argument is of type 'const char **' extern size_t iconv (iconv_t cd, char* * inbuf, size_t *inbytesleft, char* * outbuf, size_t *outbytesleft); ~~~~~~~~^~~~~ --- src/build-utils/CMakeFiles/encoding-check.dir/all --- --- src/build-utils/encoding-check --- [ 5%] Linking CXX executable encoding-check cd /construction/cad/PrusaSlicer/.build/src/build-utils && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/encoding-check.dir/link.txt --verbose=1 /usr/bin/c++ -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG CMakeFiles/encoding-check.dir/encoding-check.cpp.o -o encoding-check [ 5%] Built target encoding-check --- src/libslic3r/CMakeFiles/libslic3r_cgal.dir/all --- /usr/bin/make -f src/libslic3r/CMakeFiles/libslic3r_cgal.dir/build.make src/libslic3r/CMakeFiles/libslic3r_cgal.dir/depend --- src/libslic3r/CMakeFiles/libslic3r_cgal.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/libslic3r /construction/cad/PrusaSlicer/.build/src/libslic3r/CMakeFiles/libslic3r_cgal.dir/DependInfo.cmake --- src/hidapi/CMakeFiles/hidapi.dir/all --- --- src/hidapi/libhidapi.a --- [ 6%] Linking C static library libhidapi.a cd /construction/cad/PrusaSlicer/.build/src/hidapi && /usr/local/bin/cmake -P CMakeFiles/hidapi.dir/cmake_clean_target.cmake cd /construction/cad/PrusaSlicer/.build/src/hidapi && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/hidapi.dir/link.txt --verbose=1 /usr/bin/ar qc libhidapi.a CMakeFiles/hidapi.dir/libusb/hid.c.o /usr/bin/ranlib libhidapi.a [ 6%] Built target hidapi --- src/Shiny/CMakeFiles/Shiny.dir/all --- /usr/bin/make -f src/Shiny/CMakeFiles/Shiny.dir/build.make src/Shiny/CMakeFiles/Shiny.dir/depend --- src/Shiny/CMakeFiles/Shiny.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/Shiny /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/Shiny /construction/cad/PrusaSlicer/.build/src/Shiny/CMakeFiles/Shiny.dir/DependInfo.cmake Scanning dependencies of target Shiny /usr/bin/make -f src/Shiny/CMakeFiles/Shiny.dir/build.make src/Shiny/CMakeFiles/Shiny.dir/build --- src/Shiny/CMakeFiles/Shiny.dir/ShinyManager.c.o --- [ 7%] Building C object src/Shiny/CMakeFiles/Shiny.dir/ShinyManager.c.o cd /construction/cad/PrusaSlicer/.build/src/Shiny && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/Shiny.dir/ShinyManager.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/Shiny/ShinyManager.c --- src/Shiny/CMakeFiles/Shiny.dir/ShinyNode.c.o --- [ 7%] Building C object src/Shiny/CMakeFiles/Shiny.dir/ShinyNode.c.o cd /construction/cad/PrusaSlicer/.build/src/Shiny && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/Shiny.dir/ShinyNode.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/Shiny/ShinyNode.c --- src/Shiny/CMakeFiles/Shiny.dir/ShinyNodePool.c.o --- [ 7%] Building C object src/Shiny/CMakeFiles/Shiny.dir/ShinyNodePool.c.o cd /construction/cad/PrusaSlicer/.build/src/Shiny && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/Shiny.dir/ShinyNodePool.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/Shiny/ShinyNodePool.c --- src/Shiny/CMakeFiles/Shiny.dir/ShinyNodeState.c.o --- [ 7%] Building C object src/Shiny/CMakeFiles/Shiny.dir/ShinyNodeState.c.o cd /construction/cad/PrusaSlicer/.build/src/Shiny && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/Shiny.dir/ShinyNodeState.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/Shiny/ShinyNodeState.c --- src/Shiny/CMakeFiles/Shiny.dir/ShinyOutput.c.o --- [ 8%] Building C object src/Shiny/CMakeFiles/Shiny.dir/ShinyOutput.c.o cd /construction/cad/PrusaSlicer/.build/src/Shiny && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/Shiny.dir/ShinyOutput.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/Shiny/ShinyOutput.c --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- --- src/glu-libtess/CMakeFiles/glu-libtess.dir/src/tess.c.o --- [ 9%] Building C object src/glu-libtess/CMakeFiles/glu-libtess.dir/src/tess.c.o cd /construction/cad/PrusaSlicer/.build/src/glu-libtess && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/glu-libtess.dir/src/tess.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/src/tess.c --- src/Shiny/CMakeFiles/Shiny.dir/all --- --- src/Shiny/CMakeFiles/Shiny.dir/ShinyTools.c.o --- [ 9%] Building C object src/Shiny/CMakeFiles/Shiny.dir/ShinyTools.c.o cd /construction/cad/PrusaSlicer/.build/src/Shiny && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/Shiny.dir/ShinyTools.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/Shiny/ShinyTools.c --- src/Shiny/CMakeFiles/Shiny.dir/ShinyZone.c.o --- [ 9%] Building C object src/Shiny/CMakeFiles/Shiny.dir/ShinyZone.c.o cd /construction/cad/PrusaSlicer/.build/src/Shiny && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/Shiny.dir/ShinyZone.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/Shiny/ShinyZone.c --- src/Shiny/libShiny.a --- [ 10%] Linking C static library libShiny.a cd /construction/cad/PrusaSlicer/.build/src/Shiny && /usr/local/bin/cmake -P CMakeFiles/Shiny.dir/cmake_clean_target.cmake cd /construction/cad/PrusaSlicer/.build/src/Shiny && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/Shiny.dir/link.txt --verbose=1 /usr/bin/ar qc libShiny.a CMakeFiles/Shiny.dir/ShinyManager.c.o CMakeFiles/Shiny.dir/ShinyNode.c.o CMakeFiles/Shiny.dir/ShinyNodePool.c.o CMakeFiles/Shiny.dir/ShinyNodeState.c.o CMakeFiles/Shiny.dir/ShinyOutput.c.o CMakeFiles/Shiny.dir/ShinyTools.c.o CMakeFiles/Shiny.dir/ShinyZone.c.o /usr/bin/ranlib libShiny.a [ 10%] Built target Shiny --- src/avrdude/CMakeFiles/gen_conf_h.dir/all --- /usr/bin/make -f src/avrdude/CMakeFiles/gen_conf_h.dir/build.make src/avrdude/CMakeFiles/gen_conf_h.dir/depend --- src/avrdude/CMakeFiles/gen_conf_h.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/avrdude /construction/cad/PrusaSlicer/.build/src/avrdude/CMakeFiles/gen_conf_h.dir/DependInfo.cmake Scanning dependencies of target gen_conf_h /usr/bin/make -f src/avrdude/CMakeFiles/gen_conf_h.dir/build.make src/avrdude/CMakeFiles/gen_conf_h.dir/build --- src/avrdude/avrdude-slic3r.conf.h --- [ 10%] Generating avrdude-slic3r.conf.h cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/avrdude/avrdude-conf-gen avrdude-slic3r.conf avrdude_slic3r_conf /construction/cad/PrusaSlicer/.build/src/avrdude/avrdude-slic3r.conf.h [ 10%] Built target gen_conf_h --- src/avrdude/CMakeFiles/encoding-check-avrdude-slic3r.dir/all --- /usr/bin/make -f src/avrdude/CMakeFiles/encoding-check-avrdude-slic3r.dir/build.make src/avrdude/CMakeFiles/encoding-check-avrdude-slic3r.dir/depend --- src/avrdude/CMakeFiles/encoding-check-avrdude-slic3r.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/avrdude /construction/cad/PrusaSlicer/.build/src/avrdude/CMakeFiles/encoding-check-avrdude-slic3r.dir/DependInfo.cmake Scanning dependencies of target encoding-check-avrdude-slic3r /usr/bin/make -f src/avrdude/CMakeFiles/encoding-check-avrdude-slic3r.dir/build.make src/avrdude/CMakeFiles/encoding-check-avrdude-slic3r.dir/build --- src/avrdude/CMakeFiles/encoding-check-avrdude-slic3r --- [ 10%] Checking source files encodings for target avrdude-slic3r --- encoding-check-avrdude-slic3r --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude-slic3r main-standalone.cpp [ 10%] Built target encoding-check-avrdude-slic3r --- src/avrdude/CMakeFiles/encoding-check-avrdude.dir/all --- /usr/bin/make -f src/avrdude/CMakeFiles/encoding-check-avrdude.dir/build.make src/avrdude/CMakeFiles/encoding-check-avrdude.dir/depend --- src/avrdude/CMakeFiles/encoding-check-avrdude.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/avrdude /construction/cad/PrusaSlicer/.build/src/avrdude/CMakeFiles/encoding-check-avrdude.dir/DependInfo.cmake Scanning dependencies of target encoding-check-avrdude /usr/bin/make -f src/avrdude/CMakeFiles/encoding-check-avrdude.dir/build.make src/avrdude/CMakeFiles/encoding-check-avrdude.dir/build --- src/avrdude/CMakeFiles/encoding-check-avrdude --- [ 11%] Checking source files encodings for target avrdude --- encoding-check-avrdude --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude arduino.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude avr.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude avrpart.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude avr910.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude bitbang.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude buspirate.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude butterfly.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude config.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude config_gram.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude crc16.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude fileio.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude lexer.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude linuxgpio.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude lists.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude pgm.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude pgm_type.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude pickit2.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude pindefs.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude safemode.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude ser_avrdoper.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude serbb_posix.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude serbb_win32.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude ser_posix.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude ser_win32.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude stk500.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude stk500generic.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude stk500v2.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude term.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude update.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude wiring.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude main.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude avrdude-slic3r.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check avrdude avrdude-slic3r.cpp [ 11%] Built target encoding-check-avrdude --- src/semver/CMakeFiles/encoding-check-semver.dir/all --- /usr/bin/make -f src/semver/CMakeFiles/encoding-check-semver.dir/build.make src/semver/CMakeFiles/encoding-check-semver.dir/depend --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- --- src/glu-libtess/CMakeFiles/glu-libtess.dir/src/tessmono.c.o --- --- src/semver/CMakeFiles/encoding-check-semver.dir/all --- --- src/semver/CMakeFiles/encoding-check-semver.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/semver /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/semver /construction/cad/PrusaSlicer/.build/src/semver/CMakeFiles/encoding-check-semver.dir/DependInfo.cmake --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- [ 11%] Building C object src/glu-libtess/CMakeFiles/glu-libtess.dir/src/tessmono.c.o cd /construction/cad/PrusaSlicer/.build/src/glu-libtess && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/glu-libtess.dir/src/tessmono.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/src/tessmono.c --- src/semver/CMakeFiles/encoding-check-semver.dir/all --- Scanning dependencies of target encoding-check-semver /usr/bin/make -f src/semver/CMakeFiles/encoding-check-semver.dir/build.make src/semver/CMakeFiles/encoding-check-semver.dir/build --- src/semver/CMakeFiles/encoding-check-semver --- [ 11%] Checking source files encodings for target semver --- encoding-check-semver --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/semver && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check semver semver.c cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/semver && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check semver semver.h [ 11%] Built target encoding-check-semver --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- /usr/bin/make -f src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/build.make src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/depend --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/libslic3r /construction/cad/PrusaSlicer/.build/src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/DependInfo.cmake Scanning dependencies of target encoding-check-libslic3r /usr/bin/make -f src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/build.make src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/build --- src/libslic3r/libslic3r_pch/pchheader.hpp --- [ 12%] Updating pchheader.hpp cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/local/bin/cmake -E copy /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/pchheader.hpp /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r --- [ 12%] Checking source files encodings for target libslic3r --- encoding-check-libslic3r --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r pchheader.cpp --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- --- src/glu-libtess/libglu-libtess.a --- --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r pchheader.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r BoundingBox.cpp --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- [ 12%] Linking C static library libglu-libtess.a cd /construction/cad/PrusaSlicer/.build/src/glu-libtess && /usr/local/bin/cmake -P CMakeFiles/glu-libtess.dir/cmake_clean_target.cmake --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r BoundingBox.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r BridgeDetector.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r BridgeDetector.hpp --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- cd /construction/cad/PrusaSlicer/.build/src/glu-libtess && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/glu-libtess.dir/link.txt --verbose=1 --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ClipperUtils.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ClipperUtils.hpp --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- /usr/bin/ar qc libglu-libtess.a CMakeFiles/glu-libtess.dir/src/dict.c.o CMakeFiles/glu-libtess.dir/src/geom.c.o CMakeFiles/glu-libtess.dir/src/memalloc.c.o CMakeFiles/glu-libtess.dir/src/mesh.c.o CMakeFiles/glu-libtess.dir/src/normal.c.o CMakeFiles/glu-libtess.dir/src/priorityq.c.o CMakeFiles/glu-libtess.dir/src/render.c.o CMakeFiles/glu-libtess.dir/src/sweep.c.o CMakeFiles/glu-libtess.dir/src/tess.c.o CMakeFiles/glu-libtess.dir/src/tessmono.c.o --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Config.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Config.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r EdgeGrid.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r EdgeGrid.hpp --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- /usr/bin/ranlib libglu-libtess.a --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ElephantFootCompensation.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ElephantFootCompensation.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ExPolygon.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ExPolygon.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ExPolygonCollection.cpp --- src/glu-libtess/CMakeFiles/glu-libtess.dir/all --- [ 12%] Built target glu-libtess --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- /usr/bin/make -f src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/build.make src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/depend --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/slic3r /construction/cad/PrusaSlicer/.build/src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/DependInfo.cmake --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ExPolygonCollection.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- Scanning dependencies of target encoding-check-libslic3r_gui /usr/bin/make -f src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/build.make src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/build --- src/clipper/CMakeFiles/clipper.dir/all --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper/clipper.cpp: In function 'void ClipperLib::InitEdge(ClipperLib::TEdge*, ClipperLib::TEdge*, ClipperLib::TEdge*, const ClipperLib::IntPoint&)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper/clipper.cpp:405:34: warning: 'void* memset(void*, int, size_t)' clearing an object of non-trivial type 'struct ClipperLib::TEdge'; use assignment or value-initialization instead [-Wclass-memaccess] std::memset(e, 0, sizeof(TEdge)); ^ In file included from /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper/clipper.cpp:41: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper/clipper.hpp:217:10: note: 'struct ClipperLib::TEdge' declared here struct TEdge { ^~~~~ --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- --- src/slic3r/libslic3r_gui_pch/pchheader.hpp --- [ 12%] Updating pchheader.hpp cd /construction/cad/PrusaSlicer/.build/src/slic3r && /usr/local/bin/cmake -E copy /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r/pchheader.hpp /construction/cad/PrusaSlicer/.build/src/slic3r/libslic3r_gui_pch/pchheader.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui --- [ 12%] Checking source files encodings for target libslic3r_gui --- encoding-check-libslic3r_gui --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui pchheader.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui pchheader.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Extruder.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Extruder.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ExtrusionEntity.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ExtrusionEntity.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ExtrusionEntityCollection.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ExtrusionEntityCollection.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/AboutDialog.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ExtrusionSimulator.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/AboutDialog.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ExtrusionSimulator.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/SysInfoDialog.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r FileParserError.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/SysInfoDialog.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/Fill.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/KBShortcutsDialog.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/Fill.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/KBShortcutsDialog.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/Fill3DHoneycomb.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/AppConfig.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/Fill3DHoneycomb.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillBase.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/AppConfig.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/BackgroundSlicingProcess.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/BackgroundSlicingProcess.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/BitmapCache.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/BitmapCache.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ConfigSnapshotDialog.cpp --- src/libslic3r/CMakeFiles/libslic3r_cgal.dir/all --- Scanning dependencies of target libslic3r_cgal --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ConfigSnapshotDialog.hpp --- src/libslic3r/CMakeFiles/libslic3r_cgal.dir/all --- /usr/bin/make -f src/libslic3r/CMakeFiles/libslic3r_cgal.dir/build.make src/libslic3r/CMakeFiles/libslic3r_cgal.dir/build --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/3DScene.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/3DScene.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GLShader.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GLShader.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GLCanvas3D.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GLCanvas3D.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GLCanvas3DManager.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GLCanvas3DManager.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillBase.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Selection.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillConcentric.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillConcentric.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillHoneycomb.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Selection.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillHoneycomb.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillGyroid.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillGyroid.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillPlanePath.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmos.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillPlanePath.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillRectilinear.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillRectilinear.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillRectilinear2.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillRectilinear2.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillRectilinear3.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmosManager.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Fill/FillRectilinear3.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmosManager.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Flow.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoBase.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Flow.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Format/3mf.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Format/3mf.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Format/AMF.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Format/AMF.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Format/OBJ.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Format/OBJ.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Format/objparser.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Format/objparser.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Format/PRUS.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Format/PRUS.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Format/STL.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Format/STL.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoBase.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoMove.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoMove.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoRotate.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoRotate.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/Analyzer.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoScale.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/Analyzer.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/ThumbnailData.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/ThumbnailData.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/CoolingBuffer.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/CoolingBuffer.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/PostProcessor.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/PostProcessor.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/PreviewData.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/PreviewData.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/PrintExtents.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/PrintExtents.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/SpiralVase.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/SpiralVase.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/ToolOrdering.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoScale.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoSlaSupports.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoSlaSupports.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoFlatten.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoFlatten.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoCut.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoCut.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoHollow.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Gizmos/GLGizmoHollow.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GLSelectionRectangle.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GLSelectionRectangle.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GLTexture.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/ToolOrdering.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GLTexture.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/WipeTower.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GLToolbar.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode/WipeTower.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCode.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCodeReader.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCodeReader.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCodeTimeEstimator.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/stat_r.c.o --- --- src/libslic3r/CMakeFiles/libslic3r_cgal.dir/all --- --- src/libslic3r/CMakeFiles/libslic3r_cgal.dir/MeshBoolean.cpp.o --- --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCodeTimeEstimator.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCodeWriter.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r GCodeWriter.hpp --- src/qhull/CMakeFiles/qhullstatic.dir/all --- [ 12%] Building C object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/stat_r.c.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/qhullstatic.dir/src/libqhull_r/stat_r.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhull_r/stat_r.c --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Geometry.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Geometry.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GLToolbar.cpp --- src/libslic3r/CMakeFiles/libslic3r_cgal.dir/all --- [ 12%] Building CXX object src/libslic3r/CMakeFiles/libslic3r_cgal.dir/MeshBoolean.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/.build/src/libslic3r -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -frounding-math -std=gnu++17 -o CMakeFiles/libslic3r_cgal.dir/MeshBoolean.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/MeshBoolean.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Preferences.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Preferences.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Preset.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Preset.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/PresetBundle.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/PresetBundle.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/PresetHints.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/PresetHints.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Int128.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r KDTreeIndirect.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Layer.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Layer.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r LayerRegion.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r libslic3r.h cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_version.h cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Line.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Line.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Model.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Model.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r CustomGCode.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI_Preview.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r CustomGCode.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Arrange.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Arrange.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI_Preview.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r MotionPlanner.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI_App.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r MotionPlanner.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI_App.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r MultiPoint.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI_Utils.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r MultiPoint.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI_Utils.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r MutablePriorityQueue.hpp --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- --- src/poly2tri/CMakeFiles/poly2tri.dir/sweep/cdt.cc.o --- --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/I18N.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ObjectID.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/I18N.hpp --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- [ 12%] Building CXX object src/poly2tri/CMakeFiles/poly2tri.dir/sweep/cdt.cc.o cd /construction/cad/PrusaSlicer/.build/src/poly2tri && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/poly2tri.dir/sweep/cdt.cc.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/poly2tri/sweep/cdt.cc --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ObjectID.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/MainFrame.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/MainFrame.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r PerimeterGenerator.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Plater.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r PerimeterGenerator.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Plater.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r PlaceholderParser.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI_ObjectList.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r PlaceholderParser.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI_ObjectList.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI_ObjectManipulation.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Point.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI_ObjectManipulation.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Point.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI_ObjectSettings.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Polygon.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI_ObjectSettings.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Polygon.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI_ObjectLayers.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r PolygonTrimmer.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r PolygonTrimmer.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/GUI_ObjectLayers.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/LambdaObjectDialog.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/LambdaObjectDialog.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/MeshUtils.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/MeshUtils.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Tab.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Tab.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Polyline.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Polyline.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Print.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ConfigManipulation.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Print.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r PrintBase.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r PrintBase.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r PrintConfig.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ConfigManipulation.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Field.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Field.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r PrintConfig.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r PrintObject.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r PrintRegion.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/OptionsGroup.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Semver.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ShortestPath.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/OptionsGroup.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r ShortestPath.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/BedShapeDialog.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLAPrint.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLAPrintSteps.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLAPrintSteps.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLAPrint.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/BedShapeDialog.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Slicing.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/2DBed.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Slicing.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/2DBed.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SlicingAdaptive.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/3DBed.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SlicingAdaptive.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/3DBed.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SupportMaterial.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Camera.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SupportMaterial.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Camera.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Surface.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/wxExtensions.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Surface.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/wxExtensions.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SurfaceCollection.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ExtruderSequenceDialog.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SurfaceCollection.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ExtruderSequenceDialog.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SVG.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/WipeTowerDialog.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SVG.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Technologies.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/WipeTowerDialog.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Tesselate.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/RammingChart.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Tesselate.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/RammingChart.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r TriangleMesh.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/RemovableDriveManager.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r TriangleMesh.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/RemovableDriveManager.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r utils.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/BonjourDialog.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Utils.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/BonjourDialog.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Time.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ButtonsDescription.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Time.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ButtonsDescription.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r MTUtils.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ImGuiWrapper.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Zipper.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ImGuiWrapper.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r Zipper.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r MinAreaBoundingBox.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Config/Snapshot.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r MinAreaBoundingBox.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Config/Snapshot.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Config/Version.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r miniz_extension.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r miniz_extension.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Config/Version.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SimplifyMesh.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/ASCIIFolding.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SimplifyMeshImpl.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/ASCIIFolding.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/Serial.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/Serial.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ConfigWizard.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SimplifyMesh.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ConfigWizard.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r OpenVDBUtils.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ConfigWizard_private.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r OpenVDBUtils.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/MsgDialog.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/Common.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/MsgDialog.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/Common.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/Pad.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/UpdateDialogs.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/Pad.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/UpdateDialogs.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/SupportTreeBuilder.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/FirmwareDialog.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/SupportTreeBuildsteps.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/FirmwareDialog.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/SupportTreeBuildsteps.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ProgressIndicator.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/SupportTreeBuilder.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ProgressStatusBar.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/Concurrency.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ProgressStatusBar.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/SupportTree.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/PrintHostDialogs.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/SupportTree.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/PrintHostDialogs.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/Rotfinder.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Job.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/Rotfinder.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Mouse3DController.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/BoostAdapter.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/Mouse3DController.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/SpatIndex.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/Raster.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/DoubleSlider.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/Raster.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/DoubleSlider.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/RasterWriter.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ObjectDataViewModel.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/RasterWriter.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui GUI/ObjectDataViewModel.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/ConcaveHull.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/Http.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/ConcaveHull.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/Http.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/Hollowing.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/FixModelByWin10.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/Hollowing.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/FixModelByWin10.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/JobController.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/OctoPrint.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/SupportPoint.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/OctoPrint.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/SupportPointGenerator.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/SupportPointGenerator.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/Duet.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/Contour3D.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/Duet.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/Contour3D.cpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/FlashAir.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/EigenMesh3D.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/FlashAir.hpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r SLA/Clustering.hpp --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/AstroBox.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/AstroBox.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/PrintHost.cpp --- src/libslic3r/CMakeFiles/encoding-check-libslic3r.dir/all --- [ 12%] Built target encoding-check-libslic3r --- src/slic3r/CMakeFiles/encoding-check-libslic3r_gui.dir/all --- cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/PrintHost.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/Bonjour.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/Bonjour.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/PresetUpdater.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/PresetUpdater.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/UndoRedo.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/UndoRedo.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/HexFile.cpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/HexFile.hpp cd /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/slic3r && /construction/cad/PrusaSlicer/.build/src/build-utils/encoding-check libslic3r_gui Utils/Thread.hpp [ 12%] Built target encoding-check-libslic3r_gui --- src/build-utils/CMakeFiles/global-encoding-check.dir/all --- /usr/bin/make -f src/build-utils/CMakeFiles/global-encoding-check.dir/build.make src/build-utils/CMakeFiles/global-encoding-check.dir/depend --- src/build-utils/CMakeFiles/global-encoding-check.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/build-utils /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/build-utils /construction/cad/PrusaSlicer/.build/src/build-utils/CMakeFiles/global-encoding-check.dir/DependInfo.cmake Scanning dependencies of target global-encoding-check /usr/bin/make -f src/build-utils/CMakeFiles/global-encoding-check.dir/build.make src/build-utils/CMakeFiles/global-encoding-check.dir/build [ 12%] Built target global-encoding-check --- src/avrdude/CMakeFiles/avrdude.dir/all --- --- src/semver/CMakeFiles/semver.dir/all --- --- src/avrdude/CMakeFiles/avrdude.dir/all --- /usr/bin/make -f src/avrdude/CMakeFiles/avrdude.dir/build.make src/avrdude/CMakeFiles/avrdude.dir/depend --- src/semver/CMakeFiles/semver.dir/all --- /usr/bin/make -f src/semver/CMakeFiles/semver.dir/build.make src/semver/CMakeFiles/semver.dir/depend --- src/semver/CMakeFiles/semver.dir/depend --- --- src/avrdude/CMakeFiles/avrdude.dir/all --- --- src/avrdude/CMakeFiles/avrdude.dir/depend --- --- src/semver/CMakeFiles/semver.dir/all --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/semver /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/semver /construction/cad/PrusaSlicer/.build/src/semver/CMakeFiles/semver.dir/DependInfo.cmake --- src/avrdude/CMakeFiles/avrdude.dir/all --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/avrdude /construction/cad/PrusaSlicer/.build/src/avrdude/CMakeFiles/avrdude.dir/DependInfo.cmake --- src/semver/CMakeFiles/semver.dir/all --- Scanning dependencies of target semver /usr/bin/make -f src/semver/CMakeFiles/semver.dir/build.make src/semver/CMakeFiles/semver.dir/build --- src/semver/CMakeFiles/semver.dir/semver.c.o --- [ 12%] Building C object src/semver/CMakeFiles/semver.dir/semver.c.o cd /construction/cad/PrusaSlicer/.build/src/semver && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/semver.dir/semver.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/semver/semver.c --- src/avrdude/CMakeFiles/avrdude.dir/all --- Scanning dependencies of target avrdude /usr/bin/make -f src/avrdude/CMakeFiles/avrdude.dir/build.make src/avrdude/CMakeFiles/avrdude.dir/build --- src/avrdude/CMakeFiles/avrdude.dir/arduino.c.o --- [ 13%] Building C object src/avrdude/CMakeFiles/avrdude.dir/arduino.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/arduino.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/arduino.c --- src/avrdude/CMakeFiles/avrdude.dir/avr.c.o --- [ 13%] Building C object src/avrdude/CMakeFiles/avrdude.dir/avr.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/avr.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/avr.c --- src/semver/CMakeFiles/semver.dir/all --- --- src/semver/libsemver.a --- [ 14%] Linking C static library libsemver.a cd /construction/cad/PrusaSlicer/.build/src/semver && /usr/local/bin/cmake -P CMakeFiles/semver.dir/cmake_clean_target.cmake cd /construction/cad/PrusaSlicer/.build/src/semver && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/semver.dir/link.txt --verbose=1 /usr/bin/ar qc libsemver.a CMakeFiles/semver.dir/semver.c.o /usr/bin/ranlib libsemver.a [ 14%] Built target semver --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/geom2_r.c.o --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/poly2_r.c.o --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/geom2_r.c.o --- [ 14%] Building C object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/geom2_r.c.o --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/poly2_r.c.o --- [ 15%] Building C object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/poly2_r.c.o --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/geom2_r.c.o --- cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/qhullstatic.dir/src/libqhull_r/geom2_r.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhull_r/geom2_r.c --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/poly2_r.c.o --- cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/qhullstatic.dir/src/libqhull_r/poly2_r.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhull_r/poly2_r.c --- src/avrdude/CMakeFiles/avrdude.dir/all --- --- src/avrdude/CMakeFiles/avrdude.dir/avrpart.c.o --- [ 15%] Building C object src/avrdude/CMakeFiles/avrdude.dir/avrpart.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/avrpart.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/avrpart.c --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- --- src/poly2tri/CMakeFiles/poly2tri.dir/sweep/sweep.cc.o --- [ 15%] Building CXX object src/poly2tri/CMakeFiles/poly2tri.dir/sweep/sweep.cc.o cd /construction/cad/PrusaSlicer/.build/src/poly2tri && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/poly2tri.dir/sweep/sweep.cc.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/poly2tri/sweep/sweep.cc --- src/avrdude/CMakeFiles/avrdude.dir/all --- --- src/avrdude/CMakeFiles/avrdude.dir/avr910.c.o --- [ 16%] Building C object src/avrdude/CMakeFiles/avrdude.dir/avr910.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/avr910.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/avr910.c --- src/avrdude/CMakeFiles/avrdude.dir/bitbang.c.o --- [ 16%] Building C object src/avrdude/CMakeFiles/avrdude.dir/bitbang.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/bitbang.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/bitbang.c --- src/avrdude/CMakeFiles/avrdude.dir/buspirate.c.o --- [ 16%] Building C object src/avrdude/CMakeFiles/avrdude.dir/buspirate.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/buspirate.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/buspirate.c --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/merge_r.c.o --- [ 16%] Building C object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/merge_r.c.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/qhullstatic.dir/src/libqhull_r/merge_r.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhull_r/merge_r.c --- src/polypartition/CMakeFiles/polypartition.dir/all --- --- src/polypartition/libpolypartition.a --- --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/libqhull_r.c.o --- --- src/polypartition/CMakeFiles/polypartition.dir/all --- [ 16%] Linking CXX static library libpolypartition.a cd /construction/cad/PrusaSlicer/.build/src/polypartition && /usr/local/bin/cmake -P CMakeFiles/polypartition.dir/cmake_clean_target.cmake --- src/qhull/CMakeFiles/qhullstatic.dir/all --- [ 16%] Building C object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/libqhull_r.c.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/qhullstatic.dir/src/libqhull_r/libqhull_r.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhull_r/libqhull_r.c --- src/polypartition/CMakeFiles/polypartition.dir/all --- cd /construction/cad/PrusaSlicer/.build/src/polypartition && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/polypartition.dir/link.txt --verbose=1 /usr/bin/ar qc libpolypartition.a CMakeFiles/polypartition.dir/polypartition.cpp.o /usr/bin/ranlib libpolypartition.a [ 16%] Built target polypartition --- src/avrdude/CMakeFiles/avrdude.dir/all --- --- src/avrdude/CMakeFiles/avrdude.dir/butterfly.c.o --- --- src/avrdude/CMakeFiles/avrdude.dir/config.c.o --- --- src/avrdude/CMakeFiles/avrdude.dir/butterfly.c.o --- [ 17%] Building C object src/avrdude/CMakeFiles/avrdude.dir/butterfly.c.o --- src/avrdude/CMakeFiles/avrdude.dir/config.c.o --- [ 17%] Building C object src/avrdude/CMakeFiles/avrdude.dir/config.c.o --- src/avrdude/CMakeFiles/avrdude.dir/butterfly.c.o --- cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/butterfly.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/butterfly.c --- src/avrdude/CMakeFiles/avrdude.dir/config.c.o --- cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/config.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/config.c --- src/avrdude/CMakeFiles/avrdude.dir/config_gram.c.o --- [ 17%] Building C object src/avrdude/CMakeFiles/avrdude.dir/config_gram.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/config_gram.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/config_gram.c --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- --- src/poly2tri/CMakeFiles/poly2tri.dir/sweep/sweep_context.cc.o --- [ 18%] Building CXX object src/poly2tri/CMakeFiles/poly2tri.dir/sweep/sweep_context.cc.o cd /construction/cad/PrusaSlicer/.build/src/poly2tri && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/poly2tri.dir/sweep/sweep_context.cc.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/poly2tri/sweep/sweep_context.cc --- src/avrdude/CMakeFiles/avrdude.dir/all --- --- src/avrdude/CMakeFiles/avrdude.dir/crc16.c.o --- [ 18%] Building C object src/avrdude/CMakeFiles/avrdude.dir/crc16.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/crc16.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/crc16.c --- src/avrdude/CMakeFiles/avrdude.dir/fileio.c.o --- [ 18%] Building C object src/avrdude/CMakeFiles/avrdude.dir/fileio.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/fileio.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/fileio.c --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/geom_r.c.o --- [ 18%] Building C object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/geom_r.c.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/qhullstatic.dir/src/libqhull_r/geom_r.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhull_r/geom_r.c --- src/avrdude/CMakeFiles/avrdude.dir/all --- --- src/avrdude/CMakeFiles/avrdude.dir/lexer.c.o --- [ 19%] Building C object src/avrdude/CMakeFiles/avrdude.dir/lexer.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/lexer.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/lexer.c --- src/admesh/CMakeFiles/admesh.dir/all --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/connect.cpp: In function 'void stl_check_facets_nearby(stl_file*, float)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/connect.cpp:482:46: warning: comparison of integer expressions of different signedness: 'int' and 'uint32_t' {aka 'unsigned int'} [-Wsign-compare] if ( (stl->stats.connected_facets_1_edge == stl->stats.number_of_facets) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/connect.cpp:483:47: warning: comparison of integer expressions of different signedness: 'int' and 'uint32_t' {aka 'unsigned int'} [-Wsign-compare] && (stl->stats.connected_facets_2_edge == stl->stats.number_of_facets) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/connect.cpp:484:47: warning: comparison of integer expressions of different signedness: 'int' and 'uint32_t' {aka 'unsigned int'} [-Wsign-compare] && (stl->stats.connected_facets_3_edge == stl->stats.number_of_facets)) { ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/connect.cpp: In lambda function: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/connect.cpp:535:22: warning: comparison of integer expressions of different signedness: 'int' and 'uint32_t' {aka 'unsigned int'} [-Wsign-compare] if (facet_number < -- stl->stats.number_of_facets) { ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/connect.cpp:544:27: warning: comparison of integer expressions of different signedness: 'int' and 'uint32_t' {aka 'unsigned int'} [-Wsign-compare] if (other_face_idx != stl->stats.number_of_facets) { ~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- src/avrdude/CMakeFiles/avrdude.dir/all --- --- src/avrdude/CMakeFiles/avrdude.dir/linuxgpio.c.o --- [ 19%] Building C object src/avrdude/CMakeFiles/avrdude.dir/linuxgpio.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/linuxgpio.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/linuxgpio.c --- src/avrdude/CMakeFiles/avrdude.dir/lists.c.o --- [ 19%] Building C object src/avrdude/CMakeFiles/avrdude.dir/lists.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/lists.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/lists.c --- src/admesh/CMakeFiles/admesh.dir/all --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/connect.cpp: In instantiation of 'void HashTableEdges::insert_edge(stl_file*, const HashEdge&, MatchNeighbors) [with MatchNeighbors = HashTableEdges::insert_edge_exact(stl_file*, const HashEdge&)::]': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/connect.cpp:143:124: required from here /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/connect.cpp:219:16: warning: unused variable 'temp' [-Wunused-variable] HashEdge *temp = link->next; ^~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/connect.cpp: In instantiation of 'void HashTableEdges::insert_edge(stl_file*, const HashEdge&, MatchNeighbors) [with MatchNeighbors = HashTableEdges::insert_edge_nearby(stl_file*, const HashEdge&)::]': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/connect.cpp:148:130: required from here /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/connect.cpp:219:16: warning: unused variable 'temp' [-Wunused-variable] --- src/miniz/CMakeFiles/miniz_static.dir/all --- --- src/miniz/libminiz_static.a --- [ 20%] Linking C static library libminiz_static.a cd /construction/cad/PrusaSlicer/.build/src/miniz && /usr/local/bin/cmake -P CMakeFiles/miniz_static.dir/cmake_clean_target.cmake cd /construction/cad/PrusaSlicer/.build/src/miniz && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/miniz_static.dir/link.txt --verbose=1 /usr/bin/ar qc libminiz_static.a CMakeFiles/miniz_static.dir/miniz.c.o /usr/bin/ranlib libminiz_static.a [ 20%] Built target miniz_static --- src/avrdude/CMakeFiles/avrdude.dir/all --- --- src/avrdude/CMakeFiles/avrdude.dir/pgm.c.o --- --- src/avrdude/CMakeFiles/avrdude.dir/pgm_type.c.o --- --- src/avrdude/CMakeFiles/avrdude.dir/pgm.c.o --- [ 21%] Building C object src/avrdude/CMakeFiles/avrdude.dir/pgm.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/pgm.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/pgm.c --- src/avrdude/CMakeFiles/avrdude.dir/pgm_type.c.o --- [ 21%] Building C object src/avrdude/CMakeFiles/avrdude.dir/pgm_type.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/pgm_type.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/pgm_type.c --- src/avrdude/CMakeFiles/avrdude.dir/pickit2.c.o --- [ 21%] Building C object src/avrdude/CMakeFiles/avrdude.dir/pickit2.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/pickit2.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/pickit2.c --- src/avrdude/CMakeFiles/avrdude.dir/pindefs.c.o --- [ 21%] Building C object src/avrdude/CMakeFiles/avrdude.dir/pindefs.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/pindefs.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/pindefs.c --- src/avrdude/CMakeFiles/avrdude.dir/safemode.c.o --- [ 22%] Building C object src/avrdude/CMakeFiles/avrdude.dir/safemode.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/safemode.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/safemode.c --- src/avrdude/CMakeFiles/avrdude.dir/ser_avrdoper.c.o --- [ 22%] Building C object src/avrdude/CMakeFiles/avrdude.dir/ser_avrdoper.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/ser_avrdoper.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/ser_avrdoper.c --- src/avrdude/CMakeFiles/avrdude.dir/serbb_posix.c.o --- [ 22%] Building C object src/avrdude/CMakeFiles/avrdude.dir/serbb_posix.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/serbb_posix.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/serbb_posix.c --- src/avrdude/CMakeFiles/avrdude.dir/serbb_win32.c.o --- [ 22%] Building C object src/avrdude/CMakeFiles/avrdude.dir/serbb_win32.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/serbb_win32.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/serbb_win32.c --- src/avrdude/CMakeFiles/avrdude.dir/ser_posix.c.o --- [ 23%] Building C object src/avrdude/CMakeFiles/avrdude.dir/ser_posix.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/ser_posix.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/ser_posix.c --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/poly_r.c.o --- [ 24%] Building C object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/poly_r.c.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/qhullstatic.dir/src/libqhull_r/poly_r.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhull_r/poly_r.c --- src/avrdude/CMakeFiles/avrdude.dir/all --- --- src/avrdude/CMakeFiles/avrdude.dir/ser_win32.c.o --- [ 24%] Building C object src/avrdude/CMakeFiles/avrdude.dir/ser_win32.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/ser_win32.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/ser_win32.c --- src/avrdude/CMakeFiles/avrdude.dir/stk500.c.o --- [ 24%] Building C object src/avrdude/CMakeFiles/avrdude.dir/stk500.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/stk500.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/stk500.c --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/qset_r.c.o --- --- src/avrdude/CMakeFiles/avrdude.dir/all --- --- src/avrdude/CMakeFiles/avrdude.dir/stk500generic.c.o --- --- src/qhull/CMakeFiles/qhullstatic.dir/all --- [ 24%] Building C object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/qset_r.c.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/qhullstatic.dir/src/libqhull_r/qset_r.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhull_r/qset_r.c --- src/avrdude/CMakeFiles/avrdude.dir/all --- [ 25%] Building C object src/avrdude/CMakeFiles/avrdude.dir/stk500generic.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/stk500generic.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/stk500generic.c --- src/avrdude/CMakeFiles/avrdude.dir/stk500v2.c.o --- --- src/avrdude/CMakeFiles/avrdude.dir/term.c.o --- --- src/avrdude/CMakeFiles/avrdude.dir/stk500v2.c.o --- [ 25%] Building C object src/avrdude/CMakeFiles/avrdude.dir/stk500v2.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/stk500v2.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/stk500v2.c --- src/avrdude/CMakeFiles/avrdude.dir/term.c.o --- [ 25%] Building C object src/avrdude/CMakeFiles/avrdude.dir/term.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/term.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/term.c --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/mem_r.c.o --- [ 25%] Building C object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/mem_r.c.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/qhullstatic.dir/src/libqhull_r/mem_r.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhull_r/mem_r.c --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/random_r.c.o --- [ 25%] Building C object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/random_r.c.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/qhullstatic.dir/src/libqhull_r/random_r.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhull_r/random_r.c --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/usermem_r.c.o --- [ 26%] Building C object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/usermem_r.c.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/qhullstatic.dir/src/libqhull_r/usermem_r.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhull_r/usermem_r.c --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/io_r.c.o --- --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- --- src/poly2tri/libpoly2tri.a --- --- src/qhull/CMakeFiles/qhullstatic.dir/all --- [ 26%] Building C object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/io_r.c.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/qhullstatic.dir/src/libqhull_r/io_r.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhull_r/io_r.c --- src/avrdude/CMakeFiles/avrdude.dir/all --- --- src/avrdude/CMakeFiles/avrdude.dir/update.c.o --- --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- [ 26%] Linking CXX static library libpoly2tri.a cd /construction/cad/PrusaSlicer/.build/src/poly2tri && /usr/local/bin/cmake -P CMakeFiles/poly2tri.dir/cmake_clean_target.cmake --- src/avrdude/CMakeFiles/avrdude.dir/all --- [ 26%] Building C object src/avrdude/CMakeFiles/avrdude.dir/update.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/update.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/update.c --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- cd /construction/cad/PrusaSlicer/.build/src/poly2tri && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/poly2tri.dir/link.txt --verbose=1 --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/user_r.c.o --- --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- /usr/bin/ar qc libpoly2tri.a CMakeFiles/poly2tri.dir/common/shapes.cc.o CMakeFiles/poly2tri.dir/sweep/advancing_front.cc.o CMakeFiles/poly2tri.dir/sweep/cdt.cc.o CMakeFiles/poly2tri.dir/sweep/sweep.cc.o CMakeFiles/poly2tri.dir/sweep/sweep_context.cc.o --- src/qhull/CMakeFiles/qhullstatic.dir/all --- [ 26%] Building C object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/user_r.c.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/qhullstatic.dir/src/libqhull_r/user_r.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhull_r/user_r.c --- src/poly2tri/CMakeFiles/poly2tri.dir/all --- /usr/bin/ranlib libpoly2tri.a [ 26%] Built target poly2tri --- src/avrdude/CMakeFiles/avrdude.dir/all --- --- src/avrdude/CMakeFiles/avrdude.dir/wiring.c.o --- --- src/avrdude/CMakeFiles/avrdude.dir/main.c.o --- --- src/avrdude/CMakeFiles/avrdude.dir/wiring.c.o --- [ 27%] Building C object src/avrdude/CMakeFiles/avrdude.dir/wiring.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/wiring.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/wiring.c --- src/avrdude/CMakeFiles/avrdude.dir/main.c.o --- [ 27%] Building C object src/avrdude/CMakeFiles/avrdude.dir/main.c.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/cc -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu99 -o CMakeFiles/avrdude.dir/main.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/main.c --- src/avrdude/CMakeFiles/avrdude.dir/avrdude-slic3r.cpp.o --- [ 27%] Building CXX object src/avrdude/CMakeFiles/avrdude.dir/avrdude-slic3r.cpp.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/c++ -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /construction/cad/PrusaSlicer/.build/src/avrdude -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/avrdude.dir/avrdude-slic3r.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/avrdude-slic3r.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/rboxlib_r.c.o --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/Coordinates.cpp.o --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/rboxlib_r.c.o --- [ 28%] Building C object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhull_r/rboxlib_r.c.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/cc -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -o CMakeFiles/qhullstatic.dir/src/libqhull_r/rboxlib_r.c.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhull_r/rboxlib_r.c --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/Coordinates.cpp.o --- [ 28%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/Coordinates.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/Coordinates.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/Coordinates.cpp --- src/imgui/CMakeFiles/imgui.dir/all --- --- src/imgui/CMakeFiles/imgui.dir/imgui_demo.cpp.o --- [ 28%] Building CXX object src/imgui/CMakeFiles/imgui.dir/imgui_demo.cpp.o cd /construction/cad/PrusaSlicer/.build/src/imgui && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/imgui.dir/imgui_demo.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/imgui/imgui_demo.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/PointCoordinates.cpp.o --- [ 28%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/PointCoordinates.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/PointCoordinates.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/PointCoordinates.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/Qhull.cpp.o --- [ 28%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/Qhull.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/Qhull.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/Qhull.cpp --- src/avrdude/CMakeFiles/avrdude.dir/all --- --- src/avrdude/libavrdude.a --- [ 28%] Linking CXX static library libavrdude.a cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/local/bin/cmake -P CMakeFiles/avrdude.dir/cmake_clean_target.cmake cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/avrdude.dir/link.txt --verbose=1 /usr/bin/ar qc libavrdude.a CMakeFiles/avrdude.dir/arduino.c.o CMakeFiles/avrdude.dir/avr.c.o CMakeFiles/avrdude.dir/avrpart.c.o CMakeFiles/avrdude.dir/avr910.c.o CMakeFiles/avrdude.dir/bitbang.c.o CMakeFiles/avrdude.dir/buspirate.c.o CMakeFiles/avrdude.dir/butterfly.c.o CMakeFiles/avrdude.dir/config.c.o CMakeFiles/avrdude.dir/config_gram.c.o CMakeFiles/avrdude.dir/crc16.c.o CMakeFiles/avrdude.dir/fileio.c.o CMakeFiles/avrdude.dir/lexer.c.o CMakeFiles/avrdude.dir/linuxgpio.c.o CMakeFiles/avrdude.dir/lists.c.o CMakeFiles/avrdude.dir/pgm.c.o CMakeFiles/avrdude.dir/pgm_type.c.o CMakeFiles/avrdude.dir/pickit2.c.o CMakeFiles/avrdude.dir/pindefs.c.o CMakeFiles/avrdude.dir/safemode.c.o CMakeFiles/avrdude.dir/ser_avrdoper.c.o CMakeFiles/avrdude.dir/serbb_posix.c.o CMakeFiles/avrdude.dir/serbb_win32.c.o CMakeFiles/avrdude.dir/ser_posix.c.o CMakeFiles/avrdude.dir/ser_win32.c.o CMakeFiles/avrdude.dir/stk500.c.o CMakeFiles/avrdude.dir/stk500generic.c.o CMakeFiles/avrdude.dir/stk500v2.c.o CMakeFiles/avrdude.dir/term.c.o CMakeFiles/avrdude.dir/update.c.o CMakeFiles/avrdude.dir/wiring.c.o CMakeFiles/avrdude.dir/main.c.o CMakeFiles/avrdude.dir/avrdude-slic3r.cpp.o /usr/bin/ranlib libavrdude.a [ 28%] Built target avrdude --- src/avrdude/CMakeFiles/avrdude-slic3r.dir/all --- /usr/bin/make -f src/avrdude/CMakeFiles/avrdude-slic3r.dir/build.make src/avrdude/CMakeFiles/avrdude-slic3r.dir/depend --- src/avrdude/CMakeFiles/avrdude-slic3r.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/avrdude /construction/cad/PrusaSlicer/.build/src/avrdude/CMakeFiles/avrdude-slic3r.dir/DependInfo.cmake Scanning dependencies of target avrdude-slic3r /usr/bin/make -f src/avrdude/CMakeFiles/avrdude-slic3r.dir/build.make src/avrdude/CMakeFiles/avrdude-slic3r.dir/build --- src/avrdude/CMakeFiles/avrdude-slic3r.dir/main-standalone.cpp.o --- [ 28%] Building CXX object src/avrdude/CMakeFiles/avrdude-slic3r.dir/main-standalone.cpp.o cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/bin/c++ -DSLIC3R_GUI -DWXINTL_NO_GETTEXT_MACRO -D_BSD_SOURCE -D_DEFAULT_SOURCE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIE -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/avrdude-slic3r.dir/main-standalone.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/avrdude/main-standalone.cpp --- src/clipper/CMakeFiles/clipper.dir/all --- --- src/clipper/CMakeFiles/clipper.dir/clipper_z.cpp.o --- [ 28%] Building CXX object src/clipper/CMakeFiles/clipper.dir/clipper_z.cpp.o cd /construction/cad/PrusaSlicer/.build/src/clipper && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/clipper.dir/clipper_z.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper/clipper_z.cpp --- src/avrdude/CMakeFiles/avrdude-slic3r.dir/all --- --- src/avrdude/avrdude-slic3r --- [ 29%] Linking CXX executable avrdude-slic3r cd /construction/cad/PrusaSlicer/.build/src/avrdude && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/avrdude-slic3r.dir/link.txt --verbose=1 /usr/bin/c++ -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG CMakeFiles/avrdude-slic3r.dir/main-standalone.cpp.o -o avrdude-slic3r libavrdude.a [ 29%] Built target avrdude-slic3r --- src/admesh/CMakeFiles/admesh.dir/all --- --- src/admesh/CMakeFiles/admesh.dir/normals.cpp.o --- --- src/admesh/CMakeFiles/admesh.dir/shared.cpp.o --- --- src/admesh/CMakeFiles/admesh.dir/stl_io.cpp.o --- --- src/admesh/CMakeFiles/admesh.dir/normals.cpp.o --- [ 30%] Building CXX object src/admesh/CMakeFiles/admesh.dir/normals.cpp.o --- src/admesh/CMakeFiles/admesh.dir/shared.cpp.o --- [ 30%] Building CXX object src/admesh/CMakeFiles/admesh.dir/shared.cpp.o --- src/admesh/CMakeFiles/admesh.dir/stl_io.cpp.o --- [ 30%] Building CXX object src/admesh/CMakeFiles/admesh.dir/stl_io.cpp.o --- src/admesh/CMakeFiles/admesh.dir/normals.cpp.o --- cd /construction/cad/PrusaSlicer/.build/src/admesh && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/admesh.dir/normals.cpp.o -c /construction--- src/admesh/CMakeFiles/admesh.dir/shared.cpp.o --- cd /construction/cad/PrusaSlicer/.build/src/admesh && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/admesh.dir/shared.cpp.o -c /construction/--- src/admesh/CMakeFiles/admesh.dir/normals.cpp.o --- /cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/normals.cpp --- src/admesh/CMakeFiles/admesh.dir/stl_io.cpp.o --- cd /construction/cad/PrusaSlicer/.build/src/admesh && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/admesh.dir/stl_io.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/stl_io.cpp --- src/admesh/CMakeFiles/admesh.dir/shared.cpp.o --- cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/shared.cpp --- src/clipper/CMakeFiles/clipper.dir/all --- In file included from /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper/clipper_z.cpp:7: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper/clipper.cpp: In function 'void ClipperLib_Z::InitEdge(ClipperLib_Z::TEdge*, ClipperLib_Z::TEdge*, ClipperLib_Z::TEdge*, const ClipperLib_Z::IntPoint&)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper/clipper.cpp:405:34: warning: 'void* memset(void*, int, size_t)' clearing an object of non-trivial type 'struct ClipperLib_Z::TEdge'; use assignment or value-initialization instead [-Wclass-memaccess] std::memset(e, 0, sizeof(TEdge)); ^ In file included from /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper/clipper.cpp:41, from /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper/clipper_z.cpp:7: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper/clipper.hpp:217:10: note: 'struct ClipperLib_Z::TEdge' declared here struct TEdge { ^~~~~ --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullFacet.cpp.o --- [ 31%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullFacet.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullFacet.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/QhullFacet.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullFacetList.cpp.o --- [ 31%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullFacetList.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullFacetList.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/QhullFacetList.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullFacetSet.cpp.o --- [ 31%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullFacetSet.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullFacetSet.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/QhullFacetSet.cpp --- src/imgui/CMakeFiles/imgui.dir/all --- --- src/imgui/CMakeFiles/imgui.dir/imgui_draw.cpp.o --- [ 31%] Building CXX object src/imgui/CMakeFiles/imgui.dir/imgui_draw.cpp.o cd /construction/cad/PrusaSlicer/.build/src/imgui && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/imgui.dir/imgui_draw.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/imgui/imgui_draw.cpp --- src/imgui/CMakeFiles/imgui.dir/imgui_widgets.cpp.o --- [ 32%] Building CXX object src/imgui/CMakeFiles/imgui.dir/imgui_widgets.cpp.o cd /construction/cad/PrusaSlicer/.build/src/imgui && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/imgui.dir/imgui_widgets.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/imgui/imgui_widgets.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullHyperplane.cpp.o --- [ 32%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullHyperplane.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullHyperplane.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/QhullHyperplane.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullPoint.cpp.o --- [ 33%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullPoint.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullPoint.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/QhullPoint.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullPointSet.cpp.o --- [ 33%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullPointSet.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullPointSet.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/QhullPointSet.cpp --- src/admesh/CMakeFiles/admesh.dir/all --- --- src/admesh/CMakeFiles/admesh.dir/normals.cpp.o --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/normals.cpp: In function 'void stl_fix_normal_directions(stl_file*)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/normals.cpp:195:21: warning: unused variable 'temp' [-Wunused-variable] stl_normal *temp = head->next; // Delete this facet from the list. ^~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/normals.cpp:200:21: warning: comparison of integer expressions of different signedness: 'int' and 'uint32_t' {aka 'unsigned int'} [-Wsign-compare] if (checked >= stl->stats.number_of_facets) ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullPoints.cpp.o --- [ 33%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullPoints.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullPoints.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/QhullPoints.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullQh.cpp.o --- [ 34%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullQh.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullQh.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/QhullQh.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullRidge.cpp.o --- [ 34%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullRidge.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullRidge.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/QhullRidge.cpp --- src/admesh/CMakeFiles/admesh.dir/all --- --- src/admesh/CMakeFiles/admesh.dir/shared.cpp.o --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/shared.cpp: In function 'void stl_generate_shared_vertices(stl_file*, indexed_triangle_set&)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/shared.cpp:104:27: warning: comparison of integer expressions of different signedness: 'int' and 'uint32_t' {aka 'unsigned int'} [-Wsign-compare] } else if (next_facet == facet_idx) { ~~~~~~~~~~~^~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/shared.cpp: In function 'bool its_write_off(const indexed_triangle_set&, const char*)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/shared.cpp:139:20: warning: comparison of integer expressions of different signedness: 'int' and 'std::vector >::size_type' {aka 'long unsigned int'} [-Wsign-compare] for (int i = 0; i < its.vertices.size(); ++ i) ~~^~~~~~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/shared.cpp: In function 'bool its_write_vrml(const indexed_triangle_set&, const char*)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/shared.cpp:172:15: warning: comparison of integer expressions of different signedness: 'int' and 'std::vector >::size_type' {aka 'long unsigned int'} [-Wsign-compare] for (; i + 1 < its.vertices.size(); ++ i) ~~~~~~^~~~~~~~~~~~~~~~~~~~~ --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullSet.cpp.o --- [ 34%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullSet.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullSet.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/QhullSet.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullStat.cpp.o --- [ 34%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullStat.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullStat.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/QhullStat.cpp --- src/admesh/CMakeFiles/admesh.dir/all --- --- src/admesh/CMakeFiles/admesh.dir/stlinit.cpp.o --- [ 34%] Building CXX object src/admesh/CMakeFiles/admesh.dir/stlinit.cpp.o cd /construction/cad/PrusaSlicer/.build/src/admesh && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/admesh.dir/stlinit.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/stlinit.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullVertex.cpp.o --- [ 35%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullVertex.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullVertex.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/QhullVertex.cpp --- src/admesh/CMakeFiles/admesh.dir/all --- --- src/admesh/CMakeFiles/admesh.dir/util.cpp.o --- [ 35%] Building CXX object src/admesh/CMakeFiles/admesh.dir/util.cpp.o cd /construction/cad/PrusaSlicer/.build/src/admesh && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/admesh.dir/util.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/util.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullVertexSet.cpp.o --- [ 35%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullVertexSet.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullVertexSet.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/QhullVertexSet.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/RboxPoints.cpp.o --- [ 35%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/RboxPoints.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/RboxPoints.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/RboxPoints.cpp --- src/clipper/CMakeFiles/clipper.dir/all --- --- src/clipper/libclipper.a --- [ 35%] Linking CXX static library libclipper.a cd /construction/cad/PrusaSlicer/.build/src/clipper && /usr/local/bin/cmake -P CMakeFiles/clipper.dir/cmake_clean_target.cmake cd /construction/cad/PrusaSlicer/.build/src/clipper && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/clipper.dir/link.txt --verbose=1 /usr/bin/ar qc libclipper.a CMakeFiles/clipper.dir/clipper.cpp.o CMakeFiles/clipper.dir/clipper_z.cpp.o /usr/bin/ranlib libclipper.a [ 35%] Built target clipper --- src/libnest2d/CMakeFiles/libnest2d.dir/all --- /usr/bin/make -f src/libnest2d/CMakeFiles/libnest2d.dir/build.make src/libnest2d/CMakeFiles/libnest2d.dir/depend --- src/libnest2d/CMakeFiles/libnest2d.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/libnest2d /construction/cad/PrusaSlicer/.build/src/libnest2d/CMakeFiles/libnest2d.dir/DependInfo.cmake --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/RoadError.cpp.o --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/RoadLogEvent.cpp.o --- --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/RoadError.cpp.o --- [ 35%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/RoadError.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/RoadError.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/RoadError.cpp --- src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/RoadLogEvent.cpp.o --- [ 36%] Building CXX object src/qhull/CMakeFiles/qhullstatic.dir/src/libqhullcpp/RoadLogEvent.cpp.o cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/bin/c++ -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/usr/local/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -std=gnu++17 -o CMakeFiles/qhullstatic.dir/src/libqhullcpp/RoadLogEvent.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src/libqhullcpp/RoadLogEvent.cpp --- src/libnest2d/CMakeFiles/libnest2d.dir/all --- Scanning dependencies of target libnest2d /usr/bin/make -f src/libnest2d/CMakeFiles/libnest2d.dir/build.make src/libnest2d/CMakeFiles/libnest2d.dir/build --- src/libnest2d/CMakeFiles/libnest2d.dir/src/libnest2d.cpp.o --- [ 36%] Building CXX object src/libnest2d/CMakeFiles/libnest2d.dir/src/libnest2d.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libnest2d && /usr/bin/c++ -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -std=gnu++17 -o CMakeFiles/libnest2d.dir/src/libnest2d.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/src/libnest2d.cpp --- src/admesh/CMakeFiles/admesh.dir/all --- --- src/admesh/CMakeFiles/admesh.dir/stlinit.cpp.o --- In file included from /usr/local/include/boost/detail/endian.hpp:9, from /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/stlinit.cpp:31: /usr/local/include/boost/predef/detail/endian_compat.h:11:161: note: #pragma message: The use of BOOST_*_ENDIAN and BOOST_BYTE_ORDER is deprecated. Please include and use BOOST_ENDIAN_*_BYTE instead #pragma message("The use of BOOST_*_ENDIAN and BOOST_BYTE_ORDER is deprecated. Please include and use BOOST_ENDIAN_*_BYTE instead") ^ --- src/qhull/CMakeFiles/qhullstatic.dir/all --- --- src/qhull/libqhullstatic.a --- [ 36%] Linking CXX static library libqhullstatic.a cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/local/bin/cmake -P CMakeFiles/qhullstatic.dir/cmake_clean_target.cmake cd /construction/cad/PrusaSlicer/.build/src/qhull && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/qhullstatic.dir/link.txt --verbose=1 /usr/bin/ar qc libqhullstatic.a CMakeFiles/qhullstatic.dir/src/libqhull_r/global_r.c.o CMakeFiles/qhullstatic.dir/src/libqhull_r/stat_r.c.o CMakeFiles/qhullstatic.dir/src/libqhull_r/geom2_r.c.o CMakeFiles/qhullstatic.dir/src/libqhull_r/poly2_r.c.o CMakeFiles/qhullstatic.dir/src/libqhull_r/merge_r.c.o CMakeFiles/qhullstatic.dir/src/libqhull_r/libqhull_r.c.o CMakeFiles/qhullstatic.dir/src/libqhull_r/geom_r.c.o CMakeFiles/qhullstatic.dir/src/libqhull_r/poly_r.c.o CMakeFiles/qhullstatic.dir/src/libqhull_r/qset_r.c.o CMakeFiles/qhullstatic.dir/src/libqhull_r/mem_r.c.o CMakeFiles/qhullstatic.dir/src/libqhull_r/random_r.c.o CMakeFiles/qhullstatic.dir/src/libqhull_r/usermem_r.c.o CMakeFiles/qhullstatic.dir/src/libqhull_r/io_r.c.o CMakeFiles/qhullstatic.dir/src/libqhull_r/user_r.c.o CMakeFiles/qhullstatic.dir/src/libqhull_r/rboxlib_r.c.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/Coordinates.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/PointCoordinates.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/Qhull.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullFacet.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullFacetList.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullFacetSet.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullHyperplane.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullPoint.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullPointSet.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullPoints.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullQh.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullRidge.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullSet.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullStat.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullVertex.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/QhullVertexSet.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/RboxPoints.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/RoadError.cpp.o CMakeFiles/qhullstatic.dir/src/libqhullcpp/RoadLogEvent.cpp.o /usr/bin/ranlib libqhullstatic.a [ 36%] Built target qhullstatic --- src/imgui/CMakeFiles/imgui.dir/all --- --- src/imgui/libimgui.a --- [ 36%] Linking CXX static library libimgui.a cd /construction/cad/PrusaSlicer/.build/src/imgui && /usr/local/bin/cmake -P CMakeFiles/imgui.dir/cmake_clean_target.cmake cd /construction/cad/PrusaSlicer/.build/src/imgui && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/imgui.dir/link.txt --verbose=1 /usr/bin/ar qc libimgui.a CMakeFiles/imgui.dir/imgui.cpp.o CMakeFiles/imgui.dir/imgui_demo.cpp.o CMakeFiles/imgui.dir/imgui_draw.cpp.o CMakeFiles/imgui.dir/imgui_widgets.cpp.o /usr/bin/ranlib libimgui.a [ 36%] Built target imgui --- src/admesh/CMakeFiles/admesh.dir/all --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/stlinit.cpp: In function 'bool stl_read(stl_file*, FILE*, int, bool)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/stlinit.cpp:204:52: warning: 'void* memset(void*, int, size_t)' clearing an object of type 'stl_normal' {aka 'class Eigen::Matrix'} with no trivial copy-assignment; use assignment or value-initialization instead [-Wclass-memaccess] memset(&facet.normal, 0, sizeof(facet.normal)); ^ In file included from /usr/local/include/eigen3/Eigen/Core:458, from /usr/local/include/eigen3/Eigen/Geometry:11, from /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/stl.h:31, from /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/stlinit.cpp:33: /usr/local/include/eigen3/Eigen/src/Core/Matrix.h:178:7: note: 'stl_normal' {aka 'class Eigen::Matrix'} declared here class Matrix ^~~~~~ --- src/admesh/CMakeFiles/admesh.dir/util.cpp.o --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/util.cpp: In function 'void stl_translate(stl_file*, float, float, float)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/util.cpp:73:20: warning: comparison of integer expressions of different signedness: 'int' and 'uint32_t' {aka 'unsigned int'} [-Wsign-compare] for (int i = 0; i < stl->stats.number_of_facets; ++ i) ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/util.cpp: In function 'void stl_translate_relative(stl_file*, float, float, float)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/util.cpp:84:20: warning: comparison of integer expressions of different signedness: 'int' and 'uint32_t' {aka 'unsigned int'} [-Wsign-compare] for (int i = 0; i < stl->stats.number_of_facets; ++ i) ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/util.cpp: In function 'void stl_scale_versor(stl_file*, const stl_vertex&)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/util.cpp:103:20: warning: comparison of integer expressions of different signedness: 'int' and 'uint32_t' {aka 'unsigned int'} [-Wsign-compare] for (int i = 0; i < stl->stats.number_of_facets; ++ i) ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/util.cpp: In function 'void stl_repair(stl_file*, bool, bool, bool, float, bool, float, bool, int, bool, bool, bool, bool, bool, bool)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/util.cpp:327:6: warning: this 'if' clause does not guard... [-Wmisleading-indentation] if (! tolerance_flag) ^~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/util.cpp:329:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' if (! increment_flag) ^~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/util.cpp:333:41: warning: comparison of integer expressions of different signedness: 'int' and 'uint32_t' {aka 'unsigned int'} [-Wsign-compare] if (stl->stats.connected_facets_3_edge < stl->stats.number_of_facets) { ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/util.cpp:336:46: warning: comparison of integer expressions of different signedness: 'int' and 'uint32_t' {aka 'unsigned int'} [-Wsign-compare] if (stl->stats.connected_facets_3_edge < stl->stats.number_of_facets) { ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/util.cpp:354:42: warning: comparison of integer expressions of different signedness: 'int' and 'uint32_t' {aka 'unsigned int'} [-Wsign-compare] if (stl->stats.connected_facets_3_edge < stl->stats.number_of_facets) { ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/admesh/util.cpp:363:42: warning: comparison of integer expressions of different signedness: 'int' and 'uint32_t' {aka 'unsigned int'} [-Wsign-compare] if (stl->stats.connected_facets_3_edge < stl->stats.number_of_facets) { ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- src/admesh/libadmesh.a --- [ 36%] Linking CXX static library libadmesh.a cd /construction/cad/PrusaSlicer/.build/src/admesh && /usr/local/bin/cmake -P CMakeFiles/admesh.dir/cmake_clean_target.cmake cd /construction/cad/PrusaSlicer/.build/src/admesh && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/admesh.dir/link.txt --verbose=1 /usr/bin/ar qc libadmesh.a CMakeFiles/admesh.dir/connect.cpp.o CMakeFiles/admesh.dir/normals.cpp.o CMakeFiles/admesh.dir/shared.cpp.o CMakeFiles/admesh.dir/stl_io.cpp.o CMakeFiles/admesh.dir/stlinit.cpp.o CMakeFiles/admesh.dir/util.cpp.o /usr/bin/ranlib libadmesh.a [ 36%] Built target admesh --- src/libnest2d/CMakeFiles/libnest2d.dir/all --- --- src/libnest2d/liblibnest2d.a --- [ 37%] Linking CXX static library liblibnest2d.a cd /construction/cad/PrusaSlicer/.build/src/libnest2d && /usr/local/bin/cmake -P CMakeFiles/libnest2d.dir/cmake_clean_target.cmake cd /construction/cad/PrusaSlicer/.build/src/libnest2d && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/libnest2d.dir/link.txt --verbose=1 /usr/bin/ar qc liblibnest2d.a CMakeFiles/libnest2d.dir/src/libnest2d.cpp.o /usr/bin/ranlib liblibnest2d.a [ 37%] Built target libnest2d --- tests/libnest2d/CMakeFiles/libnest2d_tests.dir/all --- /usr/bin/make -f tests/libnest2d/CMakeFiles/libnest2d_tests.dir/build.make tests/libnest2d/CMakeFiles/libnest2d_tests.dir/depend --- tests/libnest2d/CMakeFiles/libnest2d_tests.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/tests/libnest2d /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/tests/libnest2d /construction/cad/PrusaSlicer/.build/tests/libnest2d/CMakeFiles/libnest2d_tests.dir/DependInfo.cmake Scanning dependencies of target libnest2d_tests /usr/bin/make -f tests/libnest2d/CMakeFiles/libnest2d_tests.dir/build.make tests/libnest2d/CMakeFiles/libnest2d_tests.dir/build --- tests/libnest2d/CMakeFiles/libnest2d_tests.dir/libnest2d_tests_main.cpp.o --- --- tests/libnest2d/CMakeFiles/libnest2d_tests.dir/printer_parts.cpp.o --- --- tests/libnest2d/CMakeFiles/libnest2d_tests.dir/libnest2d_tests_main.cpp.o --- [ 37%] Building CXX object tests/libnest2d/CMakeFiles/libnest2d_tests.dir/libnest2d_tests_main.cpp.o --- tests/libnest2d/CMakeFiles/libnest2d_tests.dir/printer_parts.cpp.o --- [ 37%] Building CXX object tests/libnest2d/CMakeFiles/libnest2d_tests.dir/printer_parts.cpp.o cd /construction/cad/PrusaSlicer/.build/tests/libnest2d && /usr/bin/c++ -DCATCH_CONFIG_FAST_COMPILE -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTEST_DATA_DIR="R\"(/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/tests/data)\"" -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/tests -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIE -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -std=gnu++17 -o CMakeFiles/libnest2d_tests.dir/printer_parts.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/tests/libnest2d/printer_parts.cpp --- tests/libnest2d/CMakeFiles/libnest2d_tests.dir/libnest2d_tests_main.cpp.o --- cd /construction/cad/PrusaSlicer/.build/tests/libnest2d && /usr/bin/c++ -DCATCH_CONFIG_FAST_COMPILE -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTEST_DATA_DIR="R\"(/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/tests/data)\"" -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/tests -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIE -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -std=gnu++17 -o CMakeFiles/libnest2d_tests.dir/libnest2d_tests_main.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/tests/libnest2d/libnest2d_tests_main.cpp --- tests/libnest2d/libnest2d_tests --- [ 37%] Linking CXX executable libnest2d_tests cd /construction/cad/PrusaSlicer/.build/tests/libnest2d && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/libnest2d_tests.dir/link.txt --verbose=1 /usr/bin/c++ -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG CMakeFiles/libnest2d_tests.dir/libnest2d_tests_main.cpp.o CMakeFiles/libnest2d_tests.dir/printer_parts.cpp.o -o libnest2d_tests -Wl,-z,origin,-rpath,/usr/local/lib ../../src/libnest2d/liblibnest2d.a ../../src/clipper/libclipper.a /usr/local/lib/libnlopt.so /usr/local/lib/libtbb.so -pthread [ 37%] Built target libnest2d_tests --- src/libslic3r/CMakeFiles/libslic3r_cgal.dir/all --- --- src/libslic3r/liblibslic3r_cgal.a --- [ 38%] Linking CXX static library liblibslic3r_cgal.a cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/local/bin/cmake -P CMakeFiles/libslic3r_cgal.dir/cmake_clean_target.cmake cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/local/bin/cmake -E cmake_link_script CMakeFiles/libslic3r_cgal.dir/link.txt --verbose=1 /usr/bin/ar qc liblibslic3r_cgal.a CMakeFiles/libslic3r_cgal.dir/MeshBoolean.cpp.o /usr/bin/ranlib liblibslic3r_cgal.a [ 38%] Built target libslic3r_cgal --- src/libslic3r/CMakeFiles/libslic3r.dir/all --- /usr/bin/make -f src/libslic3r/CMakeFiles/libslic3r.dir/build.make src/libslic3r/CMakeFiles/libslic3r.dir/depend --- src/libslic3r/libslic3r_pch/pchheader.hpp.gch/.c++ --- [ 38%] Precompiling pchheader.hpp for libslic3r (C++) cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ @/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/compile_flags.rsp -x c++-header -o /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp.gch/.c++ /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp In file included from /usr/local/include/boost/locale.hpp:22, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:79: /usr/local/include/boost/locale/localization_backend.hpp:109:18: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] std::auto_ptr get() const; ^~~~~~~~ In file included from /usr/include/c++/8.0/bits/locale_conv.h:41, from /usr/include/c++/8.0/locale:43, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:35: /usr/include/c++/8.0/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ In file included from /usr/local/include/boost/locale.hpp:22, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:79: /usr/local/include/boost/locale/localization_backend.hpp:116:59: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] void add_backend(std::string const &name,std::auto_ptr backend); ^~~~~~~~ In file included from /usr/include/c++/8.0/bits/locale_conv.h:41, from /usr/include/c++/8.0/locale:43, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:35: /usr/include/c++/8.0/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ In file included from /usr/local/include/boost/locale.hpp:24, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:79: /usr/local/include/boost/locale/util.hpp:180:28: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] BOOST_LOCALE_DECL std::auto_ptr create_utf8_converter(); ^~~~~~~~ In file included from /usr/include/c++/8.0/bits/locale_conv.h:41, from /usr/include/c++/8.0/locale:43, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:35: /usr/include/c++/8.0/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ In file included from /usr/local/include/boost/locale.hpp:24, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:79: /usr/local/include/boost/locale/util.hpp:188:28: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] BOOST_LOCALE_DECL std::auto_ptr create_simple_converter(std::string const &encoding); ^~~~~~~~ In file included from /usr/include/c++/8.0/bits/locale_conv.h:41, from /usr/include/c++/8.0/locale:43, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:35: /usr/include/c++/8.0/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ In file included from /usr/local/include/boost/locale.hpp:24, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:79: /usr/local/include/boost/locale/util.hpp:203:59: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] std::locale create_codecvt(std::locale const &in,std::auto_ptr cvt,character_facet_type type); ^~~~~~~~ In file included from /usr/include/c++/8.0/bits/locale_conv.h:41, from /usr/include/c++/8.0/locale:43, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:35: /usr/include/c++/8.0/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ In file included from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:96: /usr/local/include/tbb/atomic.h:21:141: note: #pragma message: TBB Warning: tbb/atomic.h is deprecated. For details, please see Deprecated Features appendix in the TBB reference manual. #pragma message("TBB Warning: tbb/atomic.h is deprecated. For details, please see Deprecated Features appendix in the TBB reference manual.") ^ In file included from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:99: /usr/local/include/tbb/mutex.h:21:140: note: #pragma message: TBB Warning: tbb/mutex.h is deprecated. For details, please see Deprecated Features appendix in the TBB reference manual. #pragma message("TBB Warning: tbb/mutex.h is deprecated. For details, please see Deprecated Features appendix in the TBB reference manual.") ^ In file included from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:101: /usr/local/include/tbb/task_scheduler_init.h:21:154: note: #pragma message: TBB Warning: tbb/task_scheduler_init.h is deprecated. For details, please see Deprecated Features appendix in the TBB reference manual. #pragma message("TBB Warning: tbb/task_scheduler_init.h is deprecated. For details, please see Deprecated Features appendix in the TBB reference manual.") ^ --- src/libslic3r/CMakeFiles/libslic3r.dir/depend --- cd /construction/cad/PrusaSlicer/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0 /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r /construction/cad/PrusaSlicer/.build /construction/cad/PrusaSlicer/.build/src/libslic3r /construction/cad/PrusaSlicer/.build/src/libslic3r/CMakeFiles/libslic3r.dir/DependInfo.cmake Scanning dependencies of target libslic3r /usr/bin/make -f src/libslic3r/CMakeFiles/libslic3r.dir/build.make src/libslic3r/CMakeFiles/libslic3r.dir/build --- src/libslic3r/CMakeFiles/libslic3r.dir/pchheader.cpp.o --- --- src/libslic3r/CMakeFiles/libslic3r.dir/BoundingBox.cpp.o --- --- src/libslic3r/CMakeFiles/libslic3r.dir/BridgeDetector.cpp.o --- --- src/libslic3r/CMakeFiles/libslic3r.dir/ClipperUtils.cpp.o --- --- src/libslic3r/CMakeFiles/libslic3r.dir/Config.cpp.o --- --- src/libslic3r/CMakeFiles/libslic3r.dir/EdgeGrid.cpp.o --- --- src/libslic3r/CMakeFiles/libslic3r.dir/ElephantFootCompensation.cpp.o --- --- src/libslic3r/CMakeFiles/libslic3r.dir/ExPolygon.cpp.o --- --- src/libslic3r/CMakeFiles/libslic3r.dir/ExPolygonCollection.cpp.o --- --- src/libslic3r/CMakeFiles/libslic3r.dir/Extruder.cpp.o --- --- src/libslic3r/CMakeFiles/libslic3r.dir/pchheader.cpp.o --- [ 38%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/pchheader.cpp.o --- src/libslic3r/CMakeFiles/libslic3r.dir/BoundingBox.cpp.o --- [ 38%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/BoundingBox.cpp.o --- src/libslic3r/CMakeFiles/libslic3r.dir/ClipperUtils.cpp.o --- [ 38%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/ClipperUtils.cpp.o --- src/libslic3r/CMakeFiles/libslic3r.dir/pchheader.cpp.o --- cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/inc--- src/libslic3r/CMakeFiles/libslic3r.dir/BoundingBox.cpp.o --- cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/inc--- src/libslic3r/CMakeFiles/libslic3r.dir/ClipperUtils.cpp.o --- cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/inc--- src/libslic3r/CMakeFiles/libslic3r.dir/pchheader.cpp.o --- lude/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/pchheader.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/pchheader.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/BoundingBox.cpp.o --- lude/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/BoundingBox.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/BoundingBox.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/ClipperUtils.cpp.o --- lude/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/ClipperUtils.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ClipperUtils.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/ElephantFootCompensation.cpp.o --- [ 38%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/ElephantFootCompensation.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/ElephantFootCompensation.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ElephantFootCompensation.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/ExPolygonCollection.cpp.o --- [ 38%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/ExPolygonCollection.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/ExPolygonCollection.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ExPolygonCollection.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Config.cpp.o --- [ 39%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Config.cpp.o --- src/libslic3r/CMakeFiles/libslic3r.dir/Extruder.cpp.o --- [ 39%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Extruder.cpp.o --- src/libslic3r/CMakeFiles/libslic3r.dir/Config.cpp.o --- cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Config.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Config.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Extruder.cpp.o --- cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Extruder.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Extruder.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/ExPolygon.cpp.o --- [ 39%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/ExPolygon.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/ExPolygon.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ExPolygon.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/BridgeDetector.cpp.o --- [ 40%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/BridgeDetector.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/BridgeDetector.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/BridgeDetector.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/EdgeGrid.cpp.o --- [ 41%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/EdgeGrid.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/EdgeGrid.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/EdgeGrid.cpp /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/EdgeGrid.cpp: In member function 'Slic3r::EdgeGrid::Grid::ClosestPointResult Slic3r::EdgeGrid::Grid::closest_point(const Slic3r::Point&, coord_t) const': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/EdgeGrid.cpp:1150:25: warning: comparison of integer expressions of different signedness: 'size_t' {aka 'long unsigned int'} and 'int' [-Wsign-compare] if (result.contour_idx != -1 && d_min <= double(search_radius)) { ~~~~~~~~~~~~~~~~~~~^~~~~ --- src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionEntity.cpp.o --- [ 41%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionEntity.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/ExtrusionEntity.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ExtrusionEntity.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionEntityCollection.cpp.o --- [ 41%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionEntityCollection.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/ExtrusionEntityCollection.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ExtrusionEntityCollection.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionSimulator.cpp.o --- [ 41%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionSimulator.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/ExtrusionSimulator.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ExtrusionSimulator.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Fill.cpp.o --- [ 42%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Fill.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Fill/Fill.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/Fill.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Fill3DHoneycomb.cpp.o --- [ 42%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Fill3DHoneycomb.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Fill/Fill3DHoneycomb.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/Fill3DHoneycomb.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillBase.cpp.o --- [ 42%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillBase.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Fill/FillBase.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillBase.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillConcentric.cpp.o --- [ 43%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillConcentric.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Fill/FillConcentric.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillConcentric.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillBase.cpp.o --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillBase.cpp: In function 'Slic3r::SegmentPoint Slic3r::clip_start_segment_and_point(const Points&, double)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillBase.cpp:614:21: warning: comparison of integer expressions of different signedness: 'int' and 'std::vector::size_type' {aka 'long unsigned int'} [-Wsign-compare] for (int i = 1; i < polyline.size(); ++ i) { ~~^~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillBase.cpp: In function 'double Slic3r::segment_point_distance_squared(const Vec2d&, const Vec2d&, const Vec2d&)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillBase.cpp:674:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] if (l2 < EPSILON) ^~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillBase.cpp:677:2: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' return segment_point_distance_squared(p1a, p1b, v, v.squaredNorm(), p2); ^~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillBase.cpp: In function 'double Slic3r::min_distance_of_segments(const Vec2d&, const Vec2d&, const Vec2d&, const Vec2d&)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillBase.cpp:691:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] if (l2_2 < EPSILON) ^~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillBase.cpp:695:2: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' return std::min( ^~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillBase.cpp: In member function 'bool Slic3r::mark_boundary_segments_touching_infill(const std::vector >&, std::vector >&, const Slic3r::BoundingBox&, const Polylines&, double, double)::Visitor::operator()(coord_t, coord_t)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillBase.cpp:736:11: warning: variable 'point_touching' set but not used [-Wunused-but-set-variable] bool point_touching = false; ^~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillBase.cpp: In static member function 'static void Slic3r::Fill::connect_infill(Slic3r::Polylines&&, const Slic3r::ExPolygon&, Slic3r::Polylines&, double, const Slic3r::FillParams&)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillBase.cpp:931:25: warning: unused variable 'pl1' [-Wunused-variable] const Polyline &pl1 = infill_ordered[idx_chain - 1]; ^~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillBase.cpp:932:25: warning: unused variable 'pl2' [-Wunused-variable] const Polyline &pl2 = infill_ordered[idx_chain]; ^~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillBase.cpp:958:9: warning: unused variable 'idx_chain_last' [-Wunused-variable] size_t idx_chain_last = 0; ^~~~~~~~~~~~~~ --- src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillHoneycomb.cpp.o --- [ 43%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillHoneycomb.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Fill/FillHoneycomb.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillHoneycomb.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillGyroid.cpp.o --- [ 43%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillGyroid.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Fill/FillGyroid.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillGyroid.cpp /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillGyroid.cpp: In member function 'virtual void Slic3r::FillGyroid::_fill_surface_single(const Slic3r::FillParams&, unsigned int, const std::pair&, Slic3r::ExPolygon&, Slic3r::Polylines&)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillGyroid.cpp:198:9: warning: this 'else' clause does not guard... [-Wmisleading-indentation] else ^~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillGyroid.cpp:201:6: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'else' if (abs(infill_angle) >= EPSILON) { ^~ --- src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillPlanePath.cpp.o --- [ 43%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillPlanePath.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Fill/FillPlanePath.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillPlanePath.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillRectilinear.cpp.o --- [ 44%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillRectilinear.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Fill/FillRectilinear.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillRectilinear.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillRectilinear2.cpp.o --- [ 44%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillRectilinear2.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Fill/FillRectilinear2.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillRectilinear2.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillRectilinear3.cpp.o --- [ 44%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillRectilinear3.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Fill/FillRectilinear3.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Fill/FillRectilinear3.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Flow.cpp.o --- [ 44%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Flow.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Flow.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Flow.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Format/3mf.cpp.o --- --- src/libslic3r/CMakeFiles/libslic3r.dir/Format/AMF.cpp.o --- --- src/libslic3r/CMakeFiles/libslic3r.dir/Format/3mf.cpp.o --- [ 45%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Format/3mf.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Format/3mf.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Format/3mf.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Format/AMF.cpp.o --- [ 45%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Format/AMF.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Format/AMF.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Format/AMF.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Format/OBJ.cpp.o --- [ 45%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Format/OBJ.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Format/OBJ.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Format/OBJ.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Format/objparser.cpp.o --- [ 46%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Format/objparser.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Format/objparser.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Format/objparser.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Format/PRUS.cpp.o --- [ 46%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Format/PRUS.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Format/PRUS.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Format/PRUS.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Format/STL.cpp.o --- [ 46%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Format/STL.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Format/STL.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Format/STL.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Format/3mf.cpp.o --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Format/3mf.cpp: In member function 'bool Slic3r::_3MF_Importer::_handle_start_config_object(const char**, unsigned int)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Format/3mf.cpp:1725:13: warning: unused variable 'instances_count_id' [-Wunused-variable] int instances_count_id = get_attribute_value_int(attributes, num_attributes, INSTANCESCOUNT_ATTR); ^~~~~~~~~~~~~~~~~~ --- src/libslic3r/CMakeFiles/libslic3r.dir/GCode/Analyzer.cpp.o --- [ 46%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/GCode/Analyzer.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/GCode/Analyzer.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode/Analyzer.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/GCode/ThumbnailData.cpp.o --- [ 47%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/GCode/ThumbnailData.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/GCode/ThumbnailData.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode/ThumbnailData.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/GCode/Analyzer.cpp.o --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode/Analyzer.cpp: In member function 'void Slic3r::GCodeAnalyzer::_process_color_change_tag(int)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode/Analyzer.cpp:712:28: warning: comparison of integer expressions of different signedness: 'unsigned int' and 'int' [-Wsign-compare] if (_get_extruder_id() == extruder) ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ --- src/libslic3r/CMakeFiles/libslic3r.dir/GCode/CoolingBuffer.cpp.o --- [ 47%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/GCode/CoolingBuffer.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/GCode/CoolingBuffer.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode/CoolingBuffer.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/GCode/PostProcessor.cpp.o --- [ 47%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/GCode/PostProcessor.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/GCode/PostProcessor.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode/PostProcessor.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/GCode/PreviewData.cpp.o --- [ 48%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/GCode/PreviewData.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/GCode/PreviewData.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode/PreviewData.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/GCode/PrintExtents.cpp.o --- [ 48%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/GCode/PrintExtents.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/GCode/PrintExtents.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode/PrintExtents.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/GCode/SpiralVase.cpp.o --- [ 48%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/GCode/SpiralVase.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/GCode/SpiralVase.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode/SpiralVase.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/GCode/ToolOrdering.cpp.o --- [ 48%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/GCode/ToolOrdering.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/GCode/ToolOrdering.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode/ToolOrdering.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/GCode/WipeTower.cpp.o --- [ 49%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/GCode/WipeTower.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/GCode/WipeTower.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode/WipeTower.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/GCode.cpp.o --- [ 49%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/GCode.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/GCode.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/GCodeReader.cpp.o --- [ 49%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/GCodeReader.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/GCodeReader.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCodeReader.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/GCode.cpp.o --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode.cpp: In member function 'std::vector Slic3r::GCode::sort_print_object_instances(std::vector&, const std::vector&, const std::vector*, size_t)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode.cpp:1755:17: warning: unused variable 'print' [-Wunused-variable] const Print &print = *sorted.front().first->print(); ^~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode.cpp: In function 'std::__cxx11::string Slic3r::ProcessLayer::emit_custom_gcode_per_print_z(const Slic3r::CustomGCode::Item*, unsigned int, bool)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode.cpp:1807:99: warning: comparison of integer expressions of different signedness: 'unsigned int' and 'int' [-Wsign-compare] if (!single_extruder_printer && m600_extruder_before_layer >= 0 && first_extruder_id != m600_extruder_before_layer ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- src/libslic3r/CMakeFiles/libslic3r.dir/GCodeTimeEstimator.cpp.o --- [ 49%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/GCodeTimeEstimator.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/GCodeTimeEstimator.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCodeTimeEstimator.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/GCodeWriter.cpp.o --- [ 50%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/GCodeWriter.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/GCodeWriter.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCodeWriter.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/GCode/ToolOrdering.cpp.o --- In file included from /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Print.hpp:12, from /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode/ToolOrdering.cpp:1: /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode/ToolOrdering.hpp: In member function 'void Slic3r::ToolOrdering::fill_wipe_tower_partitions(const Slic3r::PrintConfig&, coordf_t)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/GCode/ToolOrdering.hpp:23:7: warning: '*((void*)(& lt_new)+72).Slic3r::WipingExtrusions::m_layer_tools' may be used uninitialized in this function [-Wmaybe-uninitialized] class WipingExtrusions ^~~~~~~~~~~~~~~~ --- src/libslic3r/CMakeFiles/libslic3r.dir/Geometry.cpp.o --- [ 50%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Geometry.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Geometry.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Geometry.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Layer.cpp.o --- [ 50%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Layer.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Layer.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Layer.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/LayerRegion.cpp.o --- [ 51%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/LayerRegion.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/LayerRegion.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/LayerRegion.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Line.cpp.o --- [ 51%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Line.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Line.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Line.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Model.cpp.o --- [ 51%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Model.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Model.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Model.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/CustomGCode.cpp.o --- [ 51%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/CustomGCode.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/CustomGCode.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/CustomGCode.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Arrange.cpp.o --- [ 52%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Arrange.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Arrange.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/MotionPlanner.cpp.o --- [ 52%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/MotionPlanner.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/MotionPlanner.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/MotionPlanner.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/CustomGCode.cpp.o --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/CustomGCode.cpp: In function 'std::vector > Slic3r::CustomGCode::custom_tool_changes(const Slic3r::CustomGCode::Info&, size_t)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/CustomGCode.cpp:65:116: warning: comparison of integer expressions of different signedness: 'const int' and 'size_t' {aka 'long unsigned int'} [-Wsign-compare] custom_tool_changes.emplace_back(custom_gcode.print_z, static_cast(custom_gcode.extruder > num_extruders ? 1 : custom_gcode.extruder)); ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~ --- src/libslic3r/CMakeFiles/libslic3r.dir/MultiPoint.cpp.o --- [ 52%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/MultiPoint.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/MultiPoint.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/MultiPoint.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/ObjectID.cpp.o --- [ 52%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/ObjectID.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/ObjectID.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ObjectID.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/PerimeterGenerator.cpp.o --- [ 53%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/PerimeterGenerator.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/PerimeterGenerator.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/PerimeterGenerator.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/PlaceholderParser.cpp.o --- [ 53%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/PlaceholderParser.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/PlaceholderParser.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/PlaceholderParser.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Point.cpp.o --- [ 53%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Point.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Point.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Point.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Arrange.cpp.o --- In file included from /usr/local/include/boost/geometry/index/detail/varray.hpp:41, from /usr/local/include/boost/geometry/index/detail/rtree/node/node.hpp:19, from /usr/local/include/boost/geometry/index/rtree.hpp:60, from /usr/local/include/boost/geometry/algorithms/detail/within/multi_point.hpp:33, from /usr/local/include/boost/geometry/algorithms/detail/within/implementation.hpp:44, from /usr/local/include/boost/geometry/algorithms/detail/covered_by/implementation.hpp:25, from /usr/local/include/boost/geometry/algorithms/covered_by.hpp:24, from /usr/local/include/boost/geometry/algorithms/detail/distance/multipoint_to_geometry.hpp:22, from /usr/local/include/boost/geometry/algorithms/detail/distance/implementation.hpp:26, from /usr/local/include/boost/geometry/algorithms/detail/comparable_distance/implementation.hpp:22, from /usr/local/include/boost/geometry/algorithms/comparable_distance.hpp:23, from /usr/local/include/boost/geometry/algorithms/detail/buffer/buffered_piece_collection.hpp:28, from /usr/local/include/boost/geometry/algorithms/detail/buffer/buffer_inserter.hpp:35, from /usr/local/include/boost/geometry/algorithms/buffer.hpp:41, from /usr/local/include/boost/geometry/geometry.hpp:54, from /usr/local/include/boost/geometry.hpp:17, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:73: /usr/local/include/boost/geometry/index/detail/varray_detail.hpp: In instantiation of 'O boost::geometry::index::detail::varray_detail::uninitialized_copy_dispatch(I, I, O, const mpl_::bool_&) [with I = std::pair, unsigned int>*; O = std::pair, unsigned int>*]': /usr/local/include/boost/geometry/index/detail/varray_detail.hpp:262:39: required from 'F boost::geometry::index::detail::varray_detail::uninitialized_copy(I, I, F) [with I = std::pair, unsigned int>*; F = std::pair, unsigned int>*]' /usr/local/include/boost/geometry/index/detail/varray_detail.hpp:423:43: required from 'O boost::geometry::index::detail::varray_detail::uninitialized_move_if_noexcept_dispatch(I, I, O, const mpl_::bool_&) [with I = std::pair, unsigned int>*; O = std::pair, unsigned int>*]' /usr/local/include/boost/geometry/index/detail/varray_detail.hpp:433:51: required from 'O boost::geometry::index::detail::varray_detail::uninitialized_move_if_noexcept(I, I, O) [with I = std::pair, unsigned int>*; O = std::pair, unsigned int>*]' /usr/local/include/boost/geometry/index/detail/varray.hpp:1516:43: required from 'void boost::geometry::index::detail::varray::move_ctor_dispatch(boost::geometry::index::detail::varray::value_type, C>&, boost::false_type) [with long unsigned int C = 17; Value = std::pair, unsigned int>; long unsigned int Capacity = 17; typename boost::geometry::index::detail::varray_detail::varray_traits::value_type = std::pair, unsigned int>; boost::false_type = boost::integral_constant]' /usr/local/include/boost/geometry/index/detail/varray.hpp:385:9: required from 'boost::geometry::index::detail::varray::varray(boost::geometry::index::detail::varray&&) [with Value = std::pair, unsigned int>; long unsigned int Capacity = 17]' /usr/local/include/boost/geometry/index/detail/rtree/node/variant_static.hpp:35:8: [ skipping 7 instantiation contexts, use -ftemplate-backtrace-limit=0 to disable ] /usr/local/include/boost/geometry/index/rtree.hpp:1533:82: required from 'void boost::geometry::index::rtree::raw_create() [with Value = std::pair, unsigned int>; Parameters = boost::geometry::index::rstar<16, 4>; IndexableGetter = boost::geometry::index::indexable, unsigned int> >; EqualTo = boost::geometry::index::equal_to, unsigned int> >; Allocator = boost::container::new_allocator, unsigned int> >]' /usr/local/include/boost/geometry/index/rtree.hpp:616:19: required from 'void boost::geometry::index::rtree::insert(const value_type&) [with Value = std::pair, unsigned int>; Parameters = boost::geometry::index::rstar<16, 4>; IndexableGetter = boost::geometry::index::indexable, unsigned int> >; EqualTo = boost::geometry::index::equal_to, unsigned int> >; Allocator = boost::container::new_allocator, unsigned int> >; boost::geometry::index::rtree::value_type = std::pair, unsigned int>]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:340:53: required from 'Slic3r::arrangement::AutoArranger::AutoArranger(const TBin&, Slic3r::arrangement::AutoArranger::Distance, std::function, std::function) [with TBin = libnest2d::_Box; Slic3r::arrangement::AutoArranger::Distance = long int]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:356:75: required from 'Slic3r::arrangement::AutoArranger::AutoArranger(const TBin&, std::function, std::function) [with TBin = libnest2d::_Box]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:586:24: required from 'void Slic3r::arrangement::_arrange(std::vector >&, std::vector >&, const BinT&, coord_t, std::function, std::function) [with BinT = libnest2d::_Box; coord_t = int]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:661:66: required from here /usr/local/include/boost/geometry/index/detail/varray_detail.hpp:237:13: warning: 'void* memcpy(void*, const void*, size_t)' writing to an object of type 'struct std::pair, unsigned int>' with no trivial copy-assignment; use copy-assignment or copy-initialization instead [-Wclass-memaccess] ::memcpy(boost::addressof(*dst), boost::addressof(*first), sizeof(value_type) * d); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/c++/8.0/bits/stl_algobase.h:64, from /usr/include/c++/8.0/bits/specfun.h:45, from /usr/include/c++/8.0/cmath:1892, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:18: /usr/include/c++/8.0/bits/stl_pair.h:208:12: note: 'struct std::pair, unsigned int>' declared here struct pair ^~~~ In file included from /usr/local/include/boost/geometry/index/detail/varray.hpp:41, from /usr/local/include/boost/geometry/index/detail/rtree/node/node.hpp:19, from /usr/local/include/boost/geometry/index/rtree.hpp:60, from /usr/local/include/boost/geometry/algorithms/detail/within/multi_point.hpp:33, from /usr/local/include/boost/geometry/algorithms/detail/within/implementation.hpp:44, from /usr/local/include/boost/geometry/algorithms/detail/covered_by/implementation.hpp:25, from /usr/local/include/boost/geometry/algorithms/covered_by.hpp:24, from /usr/local/include/boost/geometry/algorithms/detail/distance/multipoint_to_geometry.hpp:22, from /usr/local/include/boost/geometry/algorithms/detail/distance/implementation.hpp:26, from /usr/local/include/boost/geometry/algorithms/detail/comparable_distance/implementation.hpp:22, from /usr/local/include/boost/geometry/algorithms/comparable_distance.hpp:23, from /usr/local/include/boost/geometry/algorithms/detail/buffer/buffered_piece_collection.hpp:28, from /usr/local/include/boost/geometry/algorithms/detail/buffer/buffer_inserter.hpp:35, from /usr/local/include/boost/geometry/algorithms/buffer.hpp:41, from /usr/local/include/boost/geometry/geometry.hpp:54, from /usr/local/include/boost/geometry.hpp:17, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:73: /usr/local/include/boost/geometry/index/detail/varray_detail.hpp: In instantiation of 'void boost::geometry::index::detail::varray_detail::construct_copy_dispatch(I, const V&, const mpl_::bool_&) [with I = std::pair, unsigned int>*; V = std::pair, unsigned int>]': /usr/local/include/boost/geometry/index/detail/varray_detail.hpp:568:28: required from 'void boost::geometry::index::detail::varray_detail::construct(const DisableTrivialInit&, I, const P&) [with DisableTrivialInit = boost::integral_constant; I = std::pair, unsigned int>*; P = std::pair, unsigned int>]' /usr/local/include/boost/geometry/index/detail/varray.hpp:644:22: required from 'void boost::geometry::index::detail::varray::push_back(const value_type&) [with Value = std::pair, unsigned int>; long unsigned int Capacity = 17; boost::geometry::index::detail::varray::value_type = std::pair, unsigned int>]' /usr/local/include/boost/geometry/index/detail/rtree/rstar/insert.hpp:494:9: required from 'void boost::geometry::index::detail::rtree::visitors::rstar::level_insert<0, Value, Value, Options, Translator, Box, Allocators>::operator()(boost::geometry::index::detail::rtree::visitors::rstar::level_insert<0, Value, Value, Options, Translator, Box, Allocators>::leaf&) [with Value = std::pair, unsigned int>; Options = boost::geometry::index::detail::rtree::options, boost::geometry::index::detail::rtree::insert_reinsert_tag, boost::geometry::index::detail::rtree::choose_by_overlap_diff_tag, boost::geometry::index::detail::rtree::split_default_tag, boost::geometry::index::detail::rtree::rstar_tag, boost::geometry::index::detail::rtree::node_variant_static_tag>; Translator = boost::geometry::index::detail::translator, unsigned int> >, boost::geometry::index::equal_to, unsigned int> > >; Box = boost::geometry::model::box >; Allocators = boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>; boost::geometry::index::detail::rtree::visitors::rstar::level_insert<0, Value, Value, Options, Translator, Box, Allocators>::leaf = boost::geometry::index::detail::rtree::variant_leaf, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>]' /usr/local/include/boost/variant/variant.hpp:1028:24: required from 'typename boost::disable_if_c<(MoveSemantics && boost::is_same::value), typename Visitor::result_type>::type boost::detail::variant::invoke_visitor::internal_visit(T&&, int) [with T = boost::geometry::index::detail::rtree::variant_leaf, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>&; Visitor = boost::geometry::index::detail::rtree::visitors::rstar::level_insert<0, std::pair, unsigned int>, std::pair, unsigned int>, boost::geometry::index::detail::rtree::options, boost::geometry::index::detail::rtree::insert_reinsert_tag, boost::geometry::index::detail::rtree::choose_by_overlap_diff_tag, boost::geometry::index::detail::rtree::split_default_tag, boost::geometry::index::detail::rtree::rstar_tag, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::translator, unsigned int> >, boost::geometry::index::equal_to, unsigned int> > >, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag> >; bool MoveSemantics = false; typename boost::disable_if_c<(MoveSemantics && boost::is_same::value), typename Visitor::result_type>::type = void]' /usr/local/include/boost/variant/detail/visitation_impl.hpp:126:13: required from 'typename Visitor::result_type boost::detail::variant::visitation_impl_invoke_impl(int, Visitor&, VoidPtrCV, T*, mpl_::false_) [with Visitor = boost::detail::variant::invoke_visitor, unsigned int>, std::pair, unsigned int>, boost::geometry::index::detail::rtree::options, boost::geometry::index::detail::rtree::insert_reinsert_tag, boost::geometry::index::detail::rtree::choose_by_overlap_diff_tag, boost::geometry::index::detail::rtree::split_default_tag, boost::geometry::index::detail::rtree::rstar_tag, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::translator, unsigned int> >, boost::geometry::index::equal_to, unsigned int> > >, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag> >, false>; VoidPtrCV = void*; T = boost::geometry::index::detail::rtree::variant_leaf, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>; typename Visitor::result_type = void; mpl_::false_ = mpl_::bool_]' /usr/local/include/boost/variant/detail/visitation_impl.hpp:150:41: [ skipping 17 instantiation contexts, use -ftemplate-backtrace-limit=0 to disable ] /usr/local/include/boost/geometry/index/rtree.hpp:1478:37: required from 'void boost::geometry::index::rtree::raw_insert(const value_type&) [with Value = std::pair, unsigned int>; Parameters = boost::geometry::index::rstar<16, 4>; IndexableGetter = boost::geometry::index::indexable, unsigned int> >; EqualTo = boost::geometry::index::equal_to, unsigned int> >; Allocator = boost::container::new_allocator, unsigned int> >; boost::geometry::index::rtree::value_type = std::pair, unsigned int>]' /usr/local/include/boost/geometry/index/rtree.hpp:618:15: required from 'void boost::geometry::index::rtree::insert(const value_type&) [with Value = std::pair, unsigned int>; Parameters = boost::geometry::index::rstar<16, 4>; IndexableGetter = boost::geometry::index::indexable, unsigned int> >; EqualTo = boost::geometry::index::equal_to, unsigned int> >; Allocator = boost::container::new_allocator, unsigned int> >; boost::geometry::index::rtree::value_type = std::pair, unsigned int>]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:340:53: required from 'Slic3r::arrangement::AutoArranger::AutoArranger(const TBin&, Slic3r::arrangement::AutoArranger::Distance, std::function, std::function) [with TBin = libnest2d::_Box; Slic3r::arrangement::AutoArranger::Distance = long int]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:356:75: required from 'Slic3r::arrangement::AutoArranger::AutoArranger(const TBin&, std::function, std::function) [with TBin = libnest2d::_Box]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:586:24: required from 'void Slic3r::arrangement::_arrange(std::vector >&, std::vector >&, const BinT&, coord_t, std::function, std::function) [with BinT = libnest2d::_Box; coord_t = int]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:661:66: required from here /usr/local/include/boost/geometry/index/detail/varray_detail.hpp:544:13: warning: 'void* memcpy(void*, const void*, size_t)' writing to an object of type 'struct std::pair, unsigned int>' with no trivial copy-assignment; use copy-assignment or copy-initialization instead [-Wclass-memaccess] ::memcpy(boost::addressof(*pos), boost::addressof(v), sizeof(V)); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/c++/8.0/bits/stl_algobase.h:64, from /usr/include/c++/8.0/bits/specfun.h:45, from /usr/include/c++/8.0/cmath:1892, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:18: /usr/include/c++/8.0/bits/stl_pair.h:208:12: note: 'struct std::pair, unsigned int>' declared here struct pair ^~~~ --- src/libslic3r/CMakeFiles/libslic3r.dir/Polygon.cpp.o --- [ 54%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Polygon.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Polygon.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Polygon.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Arrange.cpp.o --- In file included from /usr/local/include/boost/geometry/index/detail/varray.hpp:41, from /usr/local/include/boost/geometry/index/detail/rtree/node/node.hpp:19, from /usr/local/include/boost/geometry/index/rtree.hpp:60, from /usr/local/include/boost/geometry/algorithms/detail/within/multi_point.hpp:33, from /usr/local/include/boost/geometry/algorithms/detail/within/implementation.hpp:44, from /usr/local/include/boost/geometry/algorithms/detail/covered_by/implementation.hpp:25, from /usr/local/include/boost/geometry/algorithms/covered_by.hpp:24, from /usr/local/include/boost/geometry/algorithms/detail/distance/multipoint_to_geometry.hpp:22, from /usr/local/include/boost/geometry/algorithms/detail/distance/implementation.hpp:26, from /usr/local/include/boost/geometry/algorithms/detail/comparable_distance/implementation.hpp:22, from /usr/local/include/boost/geometry/algorithms/comparable_distance.hpp:23, from /usr/local/include/boost/geometry/algorithms/detail/buffer/buffered_piece_collection.hpp:28, from /usr/local/include/boost/geometry/algorithms/detail/buffer/buffer_inserter.hpp:35, from /usr/local/include/boost/geometry/algorithms/buffer.hpp:41, from /usr/local/include/boost/geometry/geometry.hpp:54, from /usr/local/include/boost/geometry.hpp:17, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:73: /usr/local/include/boost/geometry/index/detail/varray_detail.hpp: In instantiation of 'void boost::geometry::index::detail::varray_detail::construct_move_dispatch(I, const V&, const mpl_::bool_&) [with I = std::pair, unsigned int> >*; V = std::pair, unsigned int> >]': /usr/local/include/boost/geometry/index/detail/varray_detail.hpp:601:28: required from 'void boost::geometry::index::detail::varray_detail::construct(const DisableTrivialInit&, I, P&&) [with DisableTrivialInit = boost::integral_constant; I = std::pair, unsigned int> >*; P = std::pair, unsigned int> >]' /usr/local/include/boost/geometry/index/detail/varray.hpp:669:22: required from 'void boost::geometry::index::detail::varray::push_back(boost::geometry::index::detail::varray::value_type&&) [with Value = std::pair, unsigned int> >; long unsigned int Capacity = 17; boost::geometry::index::detail::varray::value_type = std::pair, unsigned int> >]' /usr/local/include/boost/geometry/index/detail/rtree/rstar/insert.hpp:123:13: required from 'static void boost::geometry::index::detail::rtree::visitors::rstar::remove_elements_to_reinsert::apply(ResultElements&, Node&, boost::geometry::index::detail::rtree::visitors::rstar::remove_elements_to_reinsert::internal_node_pointer, size_t, const parameters_type&, const Translator&, Allocators&) [with ResultElements = boost::geometry::index::detail::varray, unsigned int>, 17>; Node = boost::geometry::index::detail::rtree::variant_leaf, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>; Value = std::pair, unsigned int>; Options = boost::geometry::index::detail::rtree::options, boost::geometry::index::detail::rtree::insert_reinsert_tag, boost::geometry::index::detail::rtree::choose_by_overlap_diff_tag, boost::geometry::index::detail::rtree::split_default_tag, boost::geometry::index::detail::rtree::rstar_tag, boost::geometry::index::detail::rtree::node_variant_static_tag>; Translator = boost::geometry::index::detail::translator, unsigned int> >, boost::geometry::index::equal_to, unsigned int> > >; Box = boost::geometry::model::box >; Allocators = boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>; boost::geometry::index::detail::rtree::visitors::rstar::remove_elements_to_reinsert::internal_node_pointer = boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>*; boost::geometry::index::detail::rtree::visitors::rstar::remove_elements_to_reinsert::internal_node = boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>; size_t = long unsigned int; boost::geometry::index::detail::rtree::visitors::rstar::remove_elements_to_reinsert::parameters_type = boost::geometry::index::rstar<16, 4>]' /usr/local/include/boost/geometry/index/detail/rtree/rstar/insert.hpp:252:103: required from 'void boost::geometry::index::detail::rtree::visitors::rstar::level_insert_base::handle_possible_reinsert_or_split_of_root(Node&) [with Node = boost::geometry::index::detail::rtree::variant_leaf, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>; long unsigned int InsertIndex = 0; Element = std::pair, unsigned int>; Value = std::pair, unsigned int>; Options = boost::geometry::index::detail::rtree::options, boost::geometry::index::detail::rtree::insert_reinsert_tag, boost::geometry::index::detail::rtree::choose_by_overlap_diff_tag, boost::geometry::index::detail::rtree::split_default_tag, boost::geometry::index::detail::rtree::rstar_tag, boost::geometry::index::detail::rtree::node_variant_static_tag>; Translator = boost::geometry::index::detail::translator, unsigned int> >, boost::geometry::index::equal_to, unsigned int> > >; Box = boost::geometry::model::box >; Allocators = boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>]' /usr/local/include/boost/geometry/index/detail/rtree/rstar/insert.hpp:496:56: required from 'void boost::geometry::index::detail::rtree::visitors::rstar::level_insert<0, Value, Value, Options, Translator, Box, Allocators>::operator()(boost::geometry::index::detail::rtree::visitors::rstar::level_insert<0, Value, Value, Options, Translator, Box, Allocators>::leaf&) [with Value = std::pair, unsigned int>; Options = boost::geometry::index::detail::rtree::options, boost::geometry::index::detail::rtree::insert_reinsert_tag, boost::geometry::index::detail::rtree::choose_by_overlap_diff_tag, boost::geometry::index::detail::rtree::split_default_tag, boost::geometry::index::detail::rtree::rstar_tag, boost::geometry::index::detail::rtree::node_variant_static_tag>; Translator = boost::geometry::index::detail::translator, unsigned int> >, boost::geometry::index::equal_to, unsigned int> > >; Box = boost::geometry::model::box >; Allocators = boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>; boost::geometry::index::detail::rtree::visitors::rstar::level_insert<0, Value, Value, Options, Translator, Box, Allocators>::leaf = boost::geometry::index::detail::rtree::variant_leaf, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>]' /usr/local/include/boost/variant/variant.hpp:1028:24: [ skipping 19 instantiation contexts, use -ftemplate-backtrace-limit=0 to disable ] /usr/local/include/boost/geometry/index/rtree.hpp:1478:37: required from 'void boost::geometry::index::rtree::raw_insert(const value_type&) [with Value = std::pair, unsigned int>; Parameters = boost::geometry::index::rstar<16, 4>; IndexableGetter = boost::geometry::index::indexable, unsigned int> >; EqualTo = boost::geometry::index::equal_to, unsigned int> >; Allocator = boost::container::new_allocator, unsigned int> >; boost::geometry::index::rtree::value_type = std::pair, unsigned int>]' /usr/local/include/boost/geometry/index/rtree.hpp:618:15: required from 'void boost::geometry::index::rtree::insert(const value_type&) [with Value = std::pair, unsigned int>; Parameters = boost::geometry::index::rstar<16, 4>; IndexableGetter = boost::geometry::index::indexable, unsigned int> >; EqualTo = boost::geometry::index::equal_to, unsigned int> >; Allocator = boost::container::new_allocator, unsigned int> >; boost::geometry::index::rtree::value_type = std::pair, unsigned int>]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:340:53: required from 'Slic3r::arrangement::AutoArranger::AutoArranger(const TBin&, Slic3r::arrangement::AutoArranger::Distance, std::function, std::function) [with TBin = libnest2d::_Box; Slic3r::arrangement::AutoArranger::Distance = long int]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:356:75: required from 'Slic3r::arrangement::AutoArranger::AutoArranger(const TBin&, std::function, std::function) [with TBin = libnest2d::_Box]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:586:24: required from 'void Slic3r::arrangement::_arrange(std::vector >&, std::vector >&, const BinT&, coord_t, std::function, std::function) [with BinT = libnest2d::_Box; coord_t = int]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:661:66: required from here /usr/local/include/boost/geometry/index/detail/varray_detail.hpp:578:13: warning: 'void* memcpy(void*, const void*, size_t)' writing to an object of type 'struct std::pair, unsigned int> >' with no trivial copy-assignment; use copy-assignment or copy-initialization instead [-Wclass-memaccess] ::memcpy(boost::addressof(*pos), boost::addressof(v), sizeof(V)); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/c++/8.0/bits/stl_algobase.h:64, from /usr/include/c++/8.0/bits/specfun.h:45, from /usr/include/c++/8.0/cmath:1892, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:18: /usr/include/c++/8.0/bits/stl_pair.h:208:12: note: 'struct std::pair, unsigned int> >' declared here struct pair ^~~~ In file included from /usr/local/include/boost/geometry/index/detail/varray.hpp:41, from /usr/local/include/boost/geometry/index/detail/rtree/node/node.hpp:19, from /usr/local/include/boost/geometry/index/rtree.hpp:60, from /usr/local/include/boost/geometry/algorithms/detail/within/multi_point.hpp:33, from /usr/local/include/boost/geometry/algorithms/detail/within/implementation.hpp:44, from /usr/local/include/boost/geometry/algorithms/detail/covered_by/implementation.hpp:25, from /usr/local/include/boost/geometry/algorithms/covered_by.hpp:24, from /usr/local/include/boost/geometry/algorithms/detail/distance/multipoint_to_geometry.hpp:22, from /usr/local/include/boost/geometry/algorithms/detail/distance/implementation.hpp:26, from /usr/local/include/boost/geometry/algorithms/detail/comparable_distance/implementation.hpp:22, from /usr/local/include/boost/geometry/algorithms/comparable_distance.hpp:23, from /usr/local/include/boost/geometry/algorithms/detail/buffer/buffered_piece_collection.hpp:28, from /usr/local/include/boost/geometry/algorithms/detail/buffer/buffer_inserter.hpp:35, from /usr/local/include/boost/geometry/algorithms/buffer.hpp:41, from /usr/local/include/boost/geometry/geometry.hpp:54, from /usr/local/include/boost/geometry.hpp:17, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:73: /usr/local/include/boost/geometry/index/detail/varray_detail.hpp: In instantiation of 'void boost::geometry::index::detail::varray_detail::construct_move_dispatch(I, const V&, const mpl_::bool_&) [with I = std::pair >, boost::variant, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag> >*> >*; V = std::pair >, boost::variant, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag> >*> >]': /usr/local/include/boost/geometry/index/detail/varray_detail.hpp:601:28: required from 'void boost::geometry::index::detail::varray_detail::construct(const DisableTrivialInit&, I, P&&) [with DisableTrivialInit = boost::integral_constant; I = std::pair >, boost::variant, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag> >*> >*; P = std::pair >, boost::variant, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag> >*> >]' /usr/local/include/boost/geometry/index/detail/varray.hpp:669:22: required from 'void boost::geometry::index::detail::varray::push_back(boost::geometry::index::detail::varray::value_type&&) [with Value = std::pair >, boost::variant, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag> >*> >; long unsigned int Capacity = 17; boost::geometry::index::detail::varray::value_type = std::pair >, boost::variant, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag> >*> >]' /usr/local/include/boost/geometry/index/detail/rtree/rstar/insert.hpp:123:13: required from 'static void boost::geometry::index::detail::rtree::visitors::rstar::remove_elements_to_reinsert::apply(ResultElements&, Node&, boost::geometry::index::detail::rtree::visitors::rstar::remove_elements_to_reinsert::internal_node_pointer, size_t, const parameters_type&, const Translator&, Allocators&) [with ResultElements = boost::geometry::index::detail::varray >, boost::variant, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag> >*>, 17>; Node = boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>; Value = std::pair, unsigned int>; Options = boost::geometry::index::detail::rtree::options, boost::geometry::index::detail::rtree::insert_reinsert_tag, boost::geometry::index::detail::rtree::choose_by_overlap_diff_tag, boost::geometry::index::detail::rtree::split_default_tag, boost::geometry::index::detail::rtree::rstar_tag, boost::geometry::index::detail::rtree::node_variant_static_tag>; Translator = boost::geometry::index::detail::translator, unsigned int> >, boost::geometry::index::equal_to, unsigned int> > >; Box = boost::geometry::model::box >; Allocators = boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>; boost::geometry::index::detail::rtree::visitors::rstar::remove_elements_to_reinsert::internal_node_pointer = boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>*; boost::geometry::index::detail::rtree::visitors::rstar::remove_elements_to_reinsert::internal_node = boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>; size_t = long unsigned int; boost::geometry::index::detail::rtree::visitors::rstar::remove_elements_to_reinsert::parameters_type = boost::geometry::index::rstar<16, 4>]' /usr/local/include/boost/geometry/index/detail/rtree/rstar/insert.hpp:252:103: required from 'void boost::geometry::index::detail::rtree::visitors::rstar::level_insert_base::handle_possible_reinsert_or_split_of_root(Node&) [with Node = boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>; long unsigned int InsertIndex = 1; Element = std::pair, unsigned int>; Value = std::pair, unsigned int>; Options = boost::geometry::index::detail::rtree::options, boost::geometry::index::detail::rtree::insert_reinsert_tag, boost::geometry::index::detail::rtree::choose_by_overlap_diff_tag, boost::geometry::index::detail::rtree::split_default_tag, boost::geometry::index::detail::rtree::rstar_tag, boost::geometry::index::detail::rtree::node_variant_static_tag>; Translator = boost::geometry::index::detail::translator, unsigned int> >, boost::geometry::index::equal_to, unsigned int> > >; Box = boost::geometry::model::box >; Allocators = boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>]' /usr/local/include/boost/geometry/index/detail/rtree/rstar/insert.hpp:429:60: required from 'void boost::geometry::index::detail::rtree::visitors::rstar::level_insert::operator()(boost::geometry::index::detail::rtree::visitors::rstar::level_insert::internal_node&) [with long unsigned int InsertIndex = 1; Value = std::pair, unsigned int>; Options = boost::geometry::index::detail::rtree::options, boost::geometry::index::detail::rtree::insert_reinsert_tag, boost::geometry::index::detail::rtree::choose_by_overlap_diff_tag, boost::geometry::index::detail::rtree::split_default_tag, boost::geometry::index::detail::rtree::rstar_tag, boost::geometry::index::detail::rtree::node_variant_static_tag>; Translator = boost::geometry::index::detail::translator, unsigned int> >, boost::geometry::index::equal_to, unsigned int> > >; Box = boost::geometry::model::box >; Allocators = boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>; boost::geometry::index::detail::rtree::visitors::rstar::level_insert::internal_node = boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>]' /usr/local/include/boost/variant/variant.hpp:1028:24: [ skipping 20 instantiation contexts, use -ftemplate-backtrace-limit=0 to disable ] /usr/local/include/boost/geometry/index/rtree.hpp:1478:37: required from 'void boost::geometry::index::rtree::raw_insert(const value_type&) [with Value = std::pair, unsigned int>; Parameters = boost::geometry::index::rstar<16, 4>; IndexableGetter = boost::geometry::index::indexable, unsigned int> >; EqualTo = boost::geometry::index::equal_to, unsigned int> >; Allocator = boost::container::new_allocator, unsigned int> >; boost::geometry::index::rtree::value_type = std::pair, unsigned int>]' /usr/local/include/boost/geometry/index/rtree.hpp:618:15: required from 'void boost::geometry::index::rtree::insert(const value_type&) [with Value = std::pair, unsigned int>; Parameters = boost::geometry::index::rstar<16, 4>; IndexableGetter = boost::geometry::index::indexable, unsigned int> >; EqualTo = boost::geometry::index::equal_to, unsigned int> >; Allocator = boost::container::new_allocator, unsigned int> >; boost::geometry::index::rtree::value_type = std::pair, unsigned int>]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:340:53: required from 'Slic3r::arrangement::AutoArranger::AutoArranger(const TBin&, Slic3r::arrangement::AutoArranger::Distance, std::function, std::function) [with TBin = libnest2d::_Box; Slic3r::arrangement::AutoArranger::Distance = long int]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:356:75: required from 'Slic3r::arrangement::AutoArranger::AutoArranger(const TBin&, std::function, std::function) [with TBin = libnest2d::_Box]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:586:24: required from 'void Slic3r::arrangement::_arrange(std::vector >&, std::vector >&, const BinT&, coord_t, std::function, std::function) [with BinT = libnest2d::_Box; coord_t = int]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:661:66: required from here /usr/local/include/boost/geometry/index/detail/varray_detail.hpp:578:13: warning: 'void* memcpy(void*, const void*, size_t)' writing to an object of type 'struct std::pair >, boost::variant, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag> >*> >' with no trivial copy-assignment; use copy-assignment or copy-initialization instead [-Wclass-memaccess] ::memcpy(boost::addressof(*pos), boost::addressof(v), sizeof(V)); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/c++/8.0/bits/stl_algobase.h:64, from /usr/include/c++/8.0/bits/specfun.h:45, from /usr/include/c++/8.0/cmath:1892, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:18: /usr/include/c++/8.0/bits/stl_pair.h:208:12: note: 'struct std::pair >, boost::variant, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::variant_internal_node, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::allocators, unsigned int> >, std::pair, unsigned int>, boost::geometry::index::rstar<16, 4, 4, 32>, boost::geometry::model::box >, boost::geometry::index::detail::rtree::node_variant_static_tag>, boost::geometry::index::detail::rtree::node_variant_static_tag> >*> >' declared here struct pair ^~~~ In file included from /usr/local/include/boost/geometry/index/detail/varray.hpp:41, from /usr/local/include/boost/geometry/index/detail/rtree/node/node.hpp:19, from /usr/local/include/boost/geometry/index/rtree.hpp:60, from /usr/local/include/boost/geometry/algorithms/detail/within/multi_point.hpp:33, from /usr/local/include/boost/geometry/algorithms/detail/within/implementation.hpp:44, from /usr/local/include/boost/geometry/algorithms/detail/covered_by/implementation.hpp:25, from /usr/local/include/boost/geometry/algorithms/covered_by.hpp:24, from /usr/local/include/boost/geometry/algorithms/detail/distance/multipoint_to_geometry.hpp:22, from /usr/local/include/boost/geometry/algorithms/detail/distance/implementation.hpp:26, from /usr/local/include/boost/geometry/algorithms/detail/comparable_distance/implementation.hpp:22, from /usr/local/include/boost/geometry/algorithms/comparable_distance.hpp:23, from /usr/local/include/boost/geometry/algorithms/detail/buffer/buffered_piece_collection.hpp:28, from /usr/local/include/boost/geometry/algorithms/detail/buffer/buffer_inserter.hpp:35, from /usr/local/include/boost/geometry/algorithms/buffer.hpp:41, from /usr/local/include/boost/geometry/geometry.hpp:54, from /usr/local/include/boost/geometry.hpp:17, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:73: /usr/local/include/boost/geometry/index/detail/varray_detail.hpp: In instantiation of 'O boost::geometry::index::detail::varray_detail::uninitialized_copy_dispatch(I, I, O, const mpl_::bool_&) [with I = const std::pair, unsigned int>*; O = std::pair, unsigned int>*]': /usr/local/include/boost/geometry/index/detail/varray_detail.hpp:262:39: required from 'F boost::geometry::index::detail::varray_detail::uninitialized_copy(I, I, F) [with I = const std::pair, unsigned int>*; F = std::pair, unsigned int>*]' /usr/local/include/boost/geometry/index/detail/varray.hpp:302:31: required from 'boost::geometry::index::detail::varray::varray(const boost::geometry::index::detail::varray&) [with Value = std::pair, unsigned int>; long unsigned int Capacity = 17]' /usr/local/include/boost/geometry/index/detail/rtree/rstar/redistribute_elements.hpp:133:18: required from 'static void boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index_for_corner::apply(const Elements&, size_t&, boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index_for_corner::margin_type&, boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index_for_corner::content_type&, boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index_for_corner::content_type&, const Parameters&, const Translator&) [with Elements = boost::geometry::index::detail::varray, unsigned int>, 17>; Parameters = boost::geometry::index::rstar<16, 4>; Translator = boost::geometry::index::detail::translator, unsigned int> >, boost::geometry::index::equal_to, unsigned int> > >; Box = boost::geometry::model::box >; long unsigned int Corner = 0; long unsigned int AxisIndex = 1; size_t = long unsigned int; boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index_for_corner::margin_type = long double; boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index_for_corner::content_type = long double]' /usr/local/include/boost/geometry/index/detail/rtree/rstar/redistribute_elements.hpp:216:20: required from 'static void boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index_for_axis::apply(const Elements&, size_t&, size_t&, boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index_for_axis::margin_type&, boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index_for_axis::content_type&, boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index_for_axis::content_type&, const Parameters&, const Translator&) [with Elements = boost::geometry::index::detail::varray, unsigned int>, 17>; Parameters = boost::geometry::index::rstar<16, 4>; Translator = boost::geometry::index::detail::translator, unsigned int> >, boost::geometry::index::equal_to, unsigned int> > >; Box = boost::geometry::model::box >; long unsigned int AxisIndex = 1; ElementIndexableTag = boost::geometry::box_tag; size_t = long unsigned int; boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index_for_axis::margin_type = long double; boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index_for_axis::content_type = long double]' /usr/local/include/boost/geometry/index/detail/rtree/rstar/redistribute_elements.hpp:312:17: required from 'static void boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index::apply(const Elements&, size_t&, size_t&, size_t&, boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index::margin_type&, boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index::content_type&, boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index::content_type&, const Parameters&, const Translator&) [with Elements = boost::geometry::index::detail::varray, unsigned int>, 17>; Parameters = boost::geometry::index::rstar<16, 4>; Translator = boost::geometry::index::detail::translator, unsigned int> >, boost::geometry::index::equal_to, unsigned int> > >; Box = boost::geometry::model::box >; long unsigned int Dimension = 2; size_t = long unsigned int; boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index::margin_type = long double; boost::geometry::index::detail::rtree::rstar::choose_split_axis_and_index::content_type = long double]' /usr/local/include/boost/geometry/index/detail/rtree/rstar/redistribute_elements.hpp:450:20: [ skipping 24 instantiation contexts, use -ftemplate-backtrace-limit=0 to disable ] /usr/local/include/boost/geometry/index/rtree.hpp:1478:37: required from 'void boost::geometry::index::rtree::raw_insert(const value_type&) [with Value = std::pair, unsigned int>; Parameters = boost::geometry::index::rstar<16, 4>; IndexableGetter = boost::geometry::index::indexable, unsigned int> >; EqualTo = boost::geometry::index::equal_to, unsigned int> >; Allocator = boost::container::new_allocator, unsigned int> >; boost::geometry::index::rtree::value_type = std::pair, unsigned int>]' /usr/local/include/boost/geometry/index/rtree.hpp:618:15: required from 'void boost::geometry::index::rtree::insert(const value_type&) [with Value = std::pair, unsigned int>; Parameters = boost::geometry::index::rstar<16, 4>; IndexableGetter = boost::geometry::index::indexable, unsigned int> >; EqualTo = boost::geometry::index::equal_to, unsigned int> >; Allocator = boost::container::new_allocator, unsigned int> >; boost::geometry::index::rtree::value_type = std::pair, unsigned int>]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:340:53: required from 'Slic3r::arrangement::AutoArranger::AutoArranger(const TBin&, Slic3r::arrangement::AutoArranger::Distance, std::function, std::function) [with TBin = libnest2d::_Box; Slic3r::arrangement::AutoArranger::Distance = long int]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:356:75: required from 'Slic3r::arrangement::AutoArranger::AutoArranger(const TBin&, std::function, std::function) [with TBin = libnest2d::_Box]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:586:24: required from 'void Slic3r::arrangement::_arrange(std::vector >&, std::vector >&, const BinT&, coord_t, std::function, std::function) [with BinT = libnest2d::_Box; coord_t = int]' /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Arrange.cpp:661:66: required from here /usr/local/include/boost/geometry/index/detail/varray_detail.hpp:237:13: warning: 'void* memcpy(void*, const void*, size_t)' writing to an object of type 'struct std::pair, unsigned int>' with no trivial copy-assignment; use copy-assignment or copy-initialization instead [-Wclass-memaccess] ::memcpy(boost::addressof(*dst), boost::addressof(*first), sizeof(value_type) * d); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/c++/8.0/bits/stl_algobase.h:64, from /usr/include/c++/8.0/bits/specfun.h:45, from /usr/include/c++/8.0/cmath:1892, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:18: /usr/include/c++/8.0/bits/stl_pair.h:208:12: note: 'struct std::pair, unsigned int>' declared here struct pair ^~~~ --- src/libslic3r/CMakeFiles/libslic3r.dir/PolygonTrimmer.cpp.o --- [ 54%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/PolygonTrimmer.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/PolygonTrimmer.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/PolygonTrimmer.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Polyline.cpp.o --- [ 54%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Polyline.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Polyline.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Polyline.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Print.cpp.o --- [ 54%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Print.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Print.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Print.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/PrintBase.cpp.o --- [ 55%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/PrintBase.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/PrintBase.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/PrintBase.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Print.cpp.o --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Print.cpp: In member function 'void Slic3r::Print::_make_brim()': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Print.cpp:1937:17: warning: this 'for' clause does not guard... [-Wmisleading-indentation] for (; j < loops_trimmed_order.size() && loops_trimmed_order[i].second == loops_trimmed_order[j].second; ++ j) ; ^~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Print.cpp:1938:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'for' const ClipperLib_Z::Path &first_path = *loops_trimmed_order[i].first; ^~~~~ --- src/libslic3r/CMakeFiles/libslic3r.dir/PrintConfig.cpp.o --- [ 55%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/PrintConfig.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/PrintConfig.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/PrintConfig.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/PrintObject.cpp.o --- [ 55%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/PrintObject.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/PrintObject.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/PrintObject.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/PrintRegion.cpp.o --- [ 55%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/PrintRegion.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/PrintRegion.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/PrintRegion.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Semver.cpp.o --- [ 56%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Semver.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Semver.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Semver.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/ShortestPath.cpp.o --- [ 56%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/ShortestPath.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/ShortestPath.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ShortestPath.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SLAPrint.cpp.o --- [ 56%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SLAPrint.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SLAPrint.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SLAPrint.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/ShortestPath.cpp.o --- /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ShortestPath.cpp: In function 'void Slic3r::reorder_by_two_exchanges_with_segment_flipping(std::vector&)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ShortestPath.cpp:1554:11: warning: unused variable 'longest_connection_length' [-Wunused-variable] double longest_connection_length = first_crossover_candidate.first; ^~~~~~~~~~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ShortestPath.cpp: In function 'void Slic3r::reorder_by_three_exchanges_with_segment_flipping(std::vector&)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ShortestPath.cpp:1631:11: warning: unused variable 'longest_connection_length' [-Wunused-variable] double longest_connection_length = first_crossover_candidate.first; ^~~~~~~~~~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ShortestPath.cpp:1635:11: warning: unused variable 'crossover_pos_min' [-Wunused-variable] size_t crossover_pos_min = std::numeric_limits::max(); ^~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ShortestPath.cpp: In function 'void Slic3r::reorder_by_three_exchanges_with_segment_flipping2(std::vector&)': /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ShortestPath.cpp:1790:11: warning: unused variable 'longest_connection_length' [-Wunused-variable] double longest_connection_length = first_crossover_candidate.first; ^~~~~~~~~~~~~~~~~~~~~~~~~ /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/ShortestPath.cpp:1794:11: warning: unused variable 'crossover_pos_min' [-Wunused-variable] size_t crossover_pos_min = std::numeric_limits::max(); ^~~~~~~~~~~~~~~~~ --- src/libslic3r/CMakeFiles/libslic3r.dir/SLAPrintSteps.cpp.o --- [ 57%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SLAPrintSteps.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SLAPrintSteps.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SLAPrintSteps.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Slicing.cpp.o --- [ 57%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Slicing.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Slicing.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Slicing.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SlicingAdaptive.cpp.o --- [ 57%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SlicingAdaptive.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SlicingAdaptive.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SlicingAdaptive.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SupportMaterial.cpp.o --- [ 57%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SupportMaterial.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SupportMaterial.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SupportMaterial.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Surface.cpp.o --- [ 58%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Surface.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Surface.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Surface.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SurfaceCollection.cpp.o --- [ 58%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SurfaceCollection.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SurfaceCollection.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SurfaceCollection.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SVG.cpp.o --- [ 58%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SVG.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SVG.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SVG.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Tesselate.cpp.o --- [ 58%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Tesselate.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Tesselate.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Tesselate.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/TriangleMesh.cpp.o --- [ 59%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/TriangleMesh.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/TriangleMesh.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/TriangleMesh.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/utils.cpp.o --- [ 59%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/utils.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/utils.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/utils.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Time.cpp.o --- [ 59%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Time.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Time.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Time.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/Zipper.cpp.o --- [ 60%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/Zipper.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/Zipper.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/Zipper.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/MinAreaBoundingBox.cpp.o --- [ 60%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/MinAreaBoundingBox.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/MinAreaBoundingBox.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/MinAreaBoundingBox.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/miniz_extension.cpp.o --- [ 60%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/miniz_extension.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/miniz_extension.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/miniz_extension.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SimplifyMesh.cpp.o --- [ 60%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SimplifyMesh.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SimplifyMesh.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SimplifyMesh.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/OpenVDBUtils.cpp.o --- [ 61%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/OpenVDBUtils.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/OpenVDBUtils.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/OpenVDBUtils.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SLA/Common.cpp.o --- [ 61%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SLA/Common.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SLA/Common.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SLA/Common.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SLA/Pad.cpp.o --- [ 61%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SLA/Pad.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SLA/Pad.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SLA/Pad.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SLA/SupportTreeBuildsteps.cpp.o --- [ 61%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SLA/SupportTreeBuildsteps.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SLA/SupportTreeBuildsteps.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SLA/SupportTreeBuildsteps.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SLA/SupportTreeBuilder.cpp.o --- [ 62%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SLA/SupportTreeBuilder.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SLA/SupportTreeBuilder.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SLA/SupportTreeBuilder.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SLA/SupportTree.cpp.o --- [ 62%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SLA/SupportTree.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SLA/SupportTree.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SLA/SupportTree.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SLA/Rotfinder.cpp.o --- [ 62%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SLA/Rotfinder.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SLA/Rotfinder.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SLA/Rotfinder.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SLA/Raster.cpp.o --- [ 63%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SLA/Raster.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SLA/Raster.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SLA/Raster.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SLA/RasterWriter.cpp.o --- [ 63%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SLA/RasterWriter.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SLA/RasterWriter.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SLA/RasterWriter.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SLA/ConcaveHull.cpp.o --- [ 63%] Building CXX object src/libslic3r/CMakeFiles/libslic3r.dir/SLA/ConcaveHull.cpp.o cd /construction/cad/PrusaSlicer/.build/src/libslic3r && /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_clipper -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src -I/construction/cad/PrusaSlicer/.build/src/platform -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/clipper -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/polypartition -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r -I/construction/cad/PrusaSlicer/.build/src/libslic3r -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libnest2d/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/miniz -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/glu-libtess/include -I/construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/qhull/src -isystem /usr/local/include/eigen3 -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/CGAL/include -isystem /usr/local/include -isystem /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libigl -isystem /usr/local/include/OpenEXR -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fext-numeric-literals -Wall -Wno-reorder -pipe -DLIBICONV_PLUG -D__FreeBSD__=9 -O2 -fno-strict-aliasing -Wno-return-type -Wno-ignored-attributes -DLIBICONV_PLUG -fPIC -DNDEBUG -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -pthread -DOPENVDB_ABI_VERSION_NUMBER=7 -std=gnu++17 "-Winvalid-pch" "-include" "/construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp" -o CMakeFiles/libslic3r.dir/SLA/ConcaveHull.cpp.o -c /construction/cad/PrusaSlicer/PrusaSlicer-version_2.2.0/src/libslic3r/SLA/ConcaveHull.cpp --- src/libslic3r/CMakeFiles/libslic3r.dir/SLA/Common.cpp.o --- In file included from /usr/local/include/boost/geometry/index/detail/varray.hpp:41, from /usr/local/include/boost/geometry/index/detail/rtree/node/node.hpp:19, from /usr/local/include/boost/geometry/index/rtree.hpp:60, from /usr/local/include/boost/geometry/algorithms/detail/within/multi_point.hpp:33, from /usr/local/include/boost/geometry/algorithms/detail/within/implementation.hpp:44, from /usr/local/include/boost/geometry/algorithms/detail/covered_by/implementation.hpp:25, from /usr/local/include/boost/geometry/algorithms/covered_by.hpp:24, from /usr/local/include/boost/geometry/algorithms/detail/distance/multipoint_to_geometry.hpp:22, from /usr/local/include/boost/geometry/algorithms/detail/distance/implementation.hpp:26, from /usr/local/include/boost/geometry/algorithms/detail/comparable_distance/implementation.hpp:22, from /usr/local/include/boost/geometry/algorithms/comparable_distance.hpp:23, from /usr/local/include/boost/geometry/algorithms/detail/buffer/buffered_piece_collection.hpp:28, from /usr/local/include/boost/geometry/algorithms/detail/buffer/buffer_inserter.hpp:35, from /usr/local/include/boost/geometry/algorithms/buffer.hpp:41, from /usr/local/include/boost/geometry/geometry.hpp:54, from /usr/local/include/boost/geometry.hpp:17, from /construction/cad/PrusaSlicer/.build/src/libslic3r/libslic3r_pch/pchheader.hpp:73: /usr/local/incl