------------------------------------------------------------------------------- -- Phase: setup ------------------------------------------------------------------------------- Installing /packages/All/libnghttp2-1.41.0.txz Installing /packages/All/ca_root_nss-3.56.txz ===== Message from ca_root_nss-3.56: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem Installing /packages/All/openssl-1.1.1g,1.txz Installing /packages/All/curl-7.72.0.txz Installing /packages/All/expat-2.2.8.txz Installing /packages/All/libuv-1.39.0.txz Installing /packages/All/indexinfo-0.3.1.txz Installing /packages/All/gettext-runtime-0.21.txz Installing /packages/All/rhash-1.3.9.txz Installing /packages/All/liblz4-1.9.2_1,1.txz Installing /packages/All/lzo2-2.10_1.txz Installing /packages/All/libarchive-3.4.3,1.txz Installing /packages/All/ncurses-6.2.20200831.txz Installing /packages/All/cmake-3.18.2.txz SUCCEEDED 00:00:08 ------------------------------------------------------------------------------- -- Phase: check-sanity ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: pkg-depends ------------------------------------------------------------------------------- ===> snappy-1.1.8 depends on file: /usr/local/sbin/pkg - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: fetch ------------------------------------------------------------------------------- ===> snappy-1.1.8 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by snappy-1.1.8 for building SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: checksum ------------------------------------------------------------------------------- ===> snappy-1.1.8 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by snappy-1.1.8 for building => SHA256 Checksum OK for google-snappy-1.1.8_GH0.tar.gz. SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: extract ------------------------------------------------------------------------------- ===> snappy-1.1.8 depends on file: /usr/local/sbin/pkg - found ===> Fetching all distfiles required by snappy-1.1.8 for building ===> Extracting for snappy-1.1.8 => SHA256 Checksum OK for google-snappy-1.1.8_GH0.tar.gz. Extracted Memory Use: 3.20M SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: patch ------------------------------------------------------------------------------- ===> Patching for snappy-1.1.8 SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: build-depends ------------------------------------------------------------------------------- ===> snappy-1.1.8 depends on file: /usr/local/bin/cmake - found SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: lib-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: configure ------------------------------------------------------------------------------- ===> snappy-1.1.8 depends on file: /usr/local/bin/cmake - found ===> Configuring for snappy-1.1.8 ===> Performing out-of-source build /bin/mkdir -p /construction/archivers/snappy/.build -- The C compiler identification is GNU 8.3.0 -- The CXX compiler identification is GNU 8.3.0 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /usr/bin/cc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done -- Check if the system is big endian -- Searching 16 bit integer -- Looking for sys/types.h -- Looking for sys/types.h - found -- Looking for stdint.h -- Looking for stdint.h - found -- Looking for stddef.h -- Looking for stddef.h - found -- Check size of unsigned short -- Check size of unsigned short - done -- Searching 16 bit integer - Using unsigned short -- Check if the system is big endian - little endian -- Looking for byteswap.h -- Looking for byteswap.h - not found -- Looking for sys/endian.h -- Looking for sys/endian.h - found -- Looking for sys/mman.h -- Looking for sys/mman.h - found -- Looking for sys/resource.h -- Looking for sys/resource.h - found -- Looking for sys/time.h -- Looking for sys/time.h - found -- Looking for sys/uio.h -- Looking for sys/uio.h - found -- Looking for unistd.h -- Looking for unistd.h - found -- Looking for windows.h -- Looking for windows.h - not found -- Looking for zlibVersion in z -- Looking for zlibVersion in z - found -- Looking for lzo1x_1_15_compress in lzo2 -- Looking for lzo1x_1_15_compress in lzo2 - not found -- Performing Test HAVE_VISUAL_STUDIO_ARCH_AVX -- Performing Test HAVE_VISUAL_STUDIO_ARCH_AVX - Failed -- Performing Test HAVE_VISUAL_STUDIO_ARCH_AVX2 -- Performing Test HAVE_VISUAL_STUDIO_ARCH_AVX2 - Failed -- Performing Test HAVE_CLANG_MAVX -- Performing Test HAVE_CLANG_MAVX - Success -- Performing Test HAVE_CLANG_MBMI2 -- Performing Test HAVE_CLANG_MBMI2 - Success -- Performing Test HAVE_BUILTIN_EXPECT -- Performing Test HAVE_BUILTIN_EXPECT - Success -- Performing Test HAVE_BUILTIN_CTZ -- Performing Test HAVE_BUILTIN_CTZ - Success -- Performing Test SNAPPY_HAVE_SSSE3 -- Performing Test SNAPPY_HAVE_SSSE3 - Failed -- Performing Test SNAPPY_HAVE_BMI2 -- Performing Test SNAPPY_HAVE_BMI2 - Failed -- Looking for mmap -- Looking for mmap - found -- Looking for sysconf -- Looking for sysconf - found -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: CMAKE_CXX_FLAGS_DEBUG CMAKE_C_FLAGS_DEBUG CMAKE_C_FLAGS_RELEASE CMAKE_EXE_LINKER_FLAGS CMAKE_MODULE_LINKER_FLAGS THREADS_HAVE_PTHREAD_ARG -- Build files have been written to: /construction/archivers/snappy/.build SUCCEEDED 00:00:08 ------------------------------------------------------------------------------- -- Phase: build ------------------------------------------------------------------------------- ===> Building for snappy-1.1.8 /usr/local/bin/cmake -S/construction/archivers/snappy/snappy-1.1.8 -B/construction/archivers/snappy/.build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/local/bin/cmake -E cmake_progress_start /construction/archivers/snappy/.build/CMakeFiles /construction/archivers/snappy/.build//CMakeFiles/progress.marks /usr/bin/make -f CMakeFiles/Makefile2 all --- CMakeFiles/snappy.dir/all --- /usr/bin/make -f CMakeFiles/snappy.dir/build.make CMakeFiles/snappy.dir/depend --- CMakeFiles/snappy.dir/depend --- cd /construction/archivers/snappy/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/archivers/snappy/snappy-1.1.8 /construction/archivers/snappy/snappy-1.1.8 /construction/archivers/snappy/.build /construction/archivers/snappy/.build /construction/archivers/snappy/.build/CMakeFiles/snappy.dir/DependInfo.cmake Scanning dependencies of target snappy /usr/bin/make -f CMakeFiles/snappy.dir/build.make CMakeFiles/snappy.dir/build --- CMakeFiles/snappy.dir/snappy-c.cc.o --- --- CMakeFiles/snappy.dir/snappy-sinksource.cc.o --- --- CMakeFiles/snappy.dir/snappy-stubs-internal.cc.o --- --- CMakeFiles/snappy.dir/snappy.cc.o --- --- CMakeFiles/snappy.dir/snappy-c.cc.o --- [ 60%] Building CXX object CMakeFiles/snappy.dir/snappy-c.cc.o --- CMakeFiles/snappy.dir/snappy.cc.o --- [ 60%] Building CXX object CMakeFiles/snappy.dir/snappy.cc.o --- CMakeFiles/snappy.dir/snappy-stubs-internal.cc.o --- [ 60%] Building CXX object CMakeFiles/snappy.dir/snappy-stubs-internal.cc.o --- CMakeFiles/snappy.dir/snappy-c.cc.o --- /usr/bin/c++ -DHAVE_CONFIG_H -Dsnappy_EXPORTS -I/construction/archivers/snappy/.build -I/construction/archivers/snappy/snappy-1.1.8 -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -fPIC -std=c++11 -o CMakeFiles/snappy.dir/snappy-c.cc.o -c /construction/archivers/snappy/snappy-1.1.8/snappy-c.cc --- CMakeFiles/snappy.dir/snappy-stubs-internal.cc.o --- /usr/bin/c++ -DHAVE_CONFIG_H -Dsnappy_EXPORTS -I/construction/archivers/snappy/.build -I/construction/archivers/snappy/snappy-1.1.8 -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -fPIC -std=c++11 -o CMakeFiles/snappy.dir/snappy-stubs-internal.cc.o -c /construction/archivers/snappy/snappy-1.1.8/snappy-stubs-internal.cc --- CMakeFiles/snappy.dir/snappy.cc.o --- /usr/bin/c++ -DHAVE_CONFIG_H -Dsnappy_EXPORTS -I/construction/archivers/snappy/.build -I/construction/archivers/snappy/snappy-1.1.8 -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -fPIC -std=c++11 -o CMakeFiles/snappy.dir/snappy.cc.o -c /construction/archivers/snappy/snappy-1.1.8/snappy.cc --- CMakeFiles/snappy.dir/snappy-sinksource.cc.o --- [ 80%] Building CXX object CMakeFiles/snappy.dir/snappy-sinksource.cc.o /usr/bin/c++ -DHAVE_CONFIG_H -Dsnappy_EXPORTS -I/construction/archivers/snappy/.build -I/construction/archivers/snappy/snappy-1.1.8 -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -fPIC -std=c++11 -o CMakeFiles/snappy.dir/snappy-sinksource.cc.o -c /construction/archivers/snappy/snappy-1.1.8/snappy-sinksource.cc --- libsnappy.so.1.1.8 --- [100%] Linking CXX shared library libsnappy.so /usr/local/bin/cmake -E cmake_link_script CMakeFiles/snappy.dir/link.txt --verbose=1 /usr/bin/c++ -fPIC -pipe -O2 -fno-strict-aliasing -pipe -O2 -fno-strict-aliasing -shared -Wl,-soname,libsnappy.so.1 -o libsnappy.so.1.1.8 CMakeFiles/snappy.dir/snappy-c.cc.o CMakeFiles/snappy.dir/snappy-sinksource.cc.o CMakeFiles/snappy.dir/snappy-stubs-internal.cc.o CMakeFiles/snappy.dir/snappy.cc.o /usr/local/bin/cmake -E cmake_symlink_library libsnappy.so.1.1.8 libsnappy.so.1 libsnappy.so [100%] Built target snappy /usr/local/bin/cmake -E cmake_progress_start /construction/archivers/snappy/.build/CMakeFiles 0 SUCCEEDED 00:00:03 ------------------------------------------------------------------------------- -- Phase: run-depends ------------------------------------------------------------------------------- SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: stage ------------------------------------------------------------------------------- ===> Staging for snappy-1.1.8 ===> Generating temporary packing list /usr/local/bin/cmake -S/construction/archivers/snappy/snappy-1.1.8 -B/construction/archivers/snappy/.build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/local/bin/cmake -E cmake_progress_start /construction/archivers/snappy/.build/CMakeFiles /construction/archivers/snappy/.build//CMakeFiles/progress.marks /usr/bin/make -f CMakeFiles/Makefile2 all /usr/bin/make -f CMakeFiles/snappy.dir/build.make CMakeFiles/snappy.dir/depend cd /construction/archivers/snappy/.build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /construction/archivers/snappy/snappy-1.1.8 /construction/archivers/snappy/snappy-1.1.8 /construction/archivers/snappy/.build /construction/archivers/snappy/.build /construction/archivers/snappy/.build/CMakeFiles/snappy.dir/DependInfo.cmake /usr/bin/make -f CMakeFiles/snappy.dir/build.make CMakeFiles/snappy.dir/build [100%] Built target snappy /usr/local/bin/cmake -E cmake_progress_start /construction/archivers/snappy/.build/CMakeFiles 0 /usr/bin/make -f CMakeFiles/Makefile2 preinstall Installing the project stripped... /usr/local/bin/cmake -DCMAKE_INSTALL_DO_STRIP=1 -P cmake_install.cmake -- Install configuration: "Release" -- Installing: /construction/archivers/snappy/stage/usr/local/lib/libsnappy.so.1.1.8 -- Installing: /construction/archivers/snappy/stage/usr/local/lib/libsnappy.so.1 -- Installing: /construction/archivers/snappy/stage/usr/local/lib/libsnappy.so -- Installing: /construction/archivers/snappy/stage/usr/local/include/snappy-c.h -- Installing: /construction/archivers/snappy/stage/usr/local/include/snappy-sinksource.h -- Installing: /construction/archivers/snappy/stage/usr/local/include/snappy.h -- Installing: /construction/archivers/snappy/stage/usr/local/include/snappy-stubs-public.h -- Installing: /construction/archivers/snappy/stage/usr/local/lib/cmake/Snappy/SnappyTargets.cmake -- Installing: /construction/archivers/snappy/stage/usr/local/lib/cmake/Snappy/SnappyTargets-release.cmake -- Installing: /construction/archivers/snappy/stage/usr/local/lib/cmake/Snappy/SnappyConfig.cmake -- Installing: /construction/archivers/snappy/stage/usr/local/lib/cmake/Snappy/SnappyConfigVersion.cmake install -m 0644 /construction/archivers/snappy/snappy.pc /construction/archivers/snappy/stage/usr/local/libdata/pkgconfig ====> Compressing man pages (compress-man) ====> Running Q/A tests (stage-qa) Warning: You have disabled the licenses framework with DISABLE_LICENSES, unable to run checks SUCCEEDED 00:00:00 ------------------------------------------------------------------------------- -- Phase: check-plist ------------------------------------------------------------------------------- ====> Checking for pkg-plist issues (check-plist) ===> Parsing plist ===> Checking for items in STAGEDIR missing from pkg-plist ===> Checking for items in pkg-plist which are not in STAGEDIR ===> No pkg-plist issues found (check-plist) SUCCEEDED 00:00:01 ------------------------------------------------------------------------------- -- Phase: package ------------------------------------------------------------------------------- ===> Building package for snappy-1.1.8 file sizes/checksums [12]: 0% file sizes/checksums [12]: 100% packing files [12]: 0% packing files [12]: 100% packing directories [0]: 0% packing directories [0]: 100% SUCCEEDED 00:00:00 TOTAL TIME 00:00:21